Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Effect of machining parameters and cutting tool coating on hole quality in dry drilling of fibre metal laminates

Giasin, Khaled ORCID: https://orcid.org/0000-0002-3992-8602, Gorey, G., Byrne, Carlton, Sinke, J. and Brousseau, Emmanuel ORCID: https://orcid.org/0000-0003-2728-3189 2019. Effect of machining parameters and cutting tool coating on hole quality in dry drilling of fibre metal laminates. Composite Structures 212 , pp. 159-174. 10.1016/j.compstruct.2019.01.023

[thumbnail of Accepted version.pdf]
Preview
PDF - Accepted Post-Print Version
Available under License Creative Commons Attribution Non-commercial No Derivatives.

Download (4MB) | Preview

Abstract

Fibre metal laminates (FMLs) are a special type of hybrid materials, which consist of sheets of metallic alloys and prepregs of composite layers stacked together in an alternating sequence and bonded together either mechanically using micro hooks or thermally using adhesive epoxies. The present paper contributes to the current literature by studying the effects of three types of cutting tool coatings namely TiAlN, AlTiN/TiAlN and TiN on the surface roughness and burr formation of holes drilled in an FML commercially known as GLARE®. While the cutting tool geometry is fixed, the study is also conducted for a range of drilling conditions by varying the spindle speed and the feed rate. The obtained results indicate that the spindle speed and the type of cutting tool coating had the most significant influence on the achieved surface roughness metrics, while tool coating had the most significant effect on burr height and burr root thickness. The most important outcome for practitioners is that the best results in terms of minimum roughness and burr formation were obtained for the TiN coated drills. However, such drills outperform the other two types of tools, i.e. with TiAlN and AlTiN/TiAlN coatings, only when used for short series of hole drilling due to rapid tool deterioration

Item Type: Article
Date Type: Publication
Status: Published
Schools: Engineering
Publisher: Elsevier
ISSN: 0263-8223
Date of First Compliant Deposit: 18 January 2019
Date of Acceptance: 2 January 2019
Last Modified: 09 Nov 2023 17:24
URI: https://orca.cardiff.ac.uk/id/eprint/118535

Citation Data

Cited 42 times in Scopus. View in Scopus. Powered By Scopus® Data

Actions (repository staff only)

Edit Item Edit Item

Downloads

Downloads per month over past year

View more statistics