Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Influence of grain size distribution of inclusions on the mechanical behaviors of track-bed materials

Qi, Shuai, Cui, Yu-Jun, Chen, Ren-Peng, Wang, Hanlin, Lamas-Lopez, Francisco, Aimedieu, Patrick, Dupla, Jean-Claude, Canou, Jean and Saussine, Gilles 2019. Influence of grain size distribution of inclusions on the mechanical behaviors of track-bed materials. Géotechnique 10.1680/jgeot.18.p.047

[thumbnail of jgeot.18.p.047.pdf]
Preview
PDF - Accepted Post-Print Version
Download (1MB) | Preview

Abstract

In the French conventional railway track-bed, an interlayer was created, mainly from the interpenetration of ballast and subgrade. Field investigation showed that the ballast content decreases over depth. In addition, depending on the locations the grain size distribution of ballast grains can be quite different, defining different values of coefficient of uniformity Cu. In this study, triaxial tests were carried out on the interlayer soil with 3 Cu values and 5 volumetric inclusion contents fv. X-ray μCT scans were also conducted on representative samples to visualize the corresponding inclusion distributions. Results show that i) at all 3 Cu values, two soil fabrics can be identified, namely grain-grain contact structure for large inclusion contents (fv = 35% and 45%) and fine-fine contact structure for small inclusion contents (fv = 5%, 10% and 20%), and the characteristic volumetric inclusion content fv-cha separating these two categories was larger for smaller Cu since in this case less inclusion contacts were expected to be developed at a given fv; ii) for the grain-grain contact structure, a smaller Cu caused larger maximum deviator stress qmax, larger friction angle, larger Poisson's ratio and more dilatancy due to the involvement of more large grains at smaller Cu; iii) for the fine-fine contact structure, an opposite trend was observed: the smaller the Cu, the smaller the qmax the friction angle, the Poisson's ratio and the dilatancy due to the less quantity of inclusion grains; iv) the change patterns of Young's modulus and cohesion with increasing Cu were the same for the two soil fabrics - Young's modulus and cohesion decreased with the increase of Cu.

Item Type: Article
Date Type: Published Online
Status: Published
Schools: Engineering
Publisher: Thomas Telford (ICE Publishing)
ISSN: 0016-8505
Date of First Compliant Deposit: 13 March 2019
Date of Acceptance: 21 February 2019
Last Modified: 06 Nov 2023 21:11
URI: https://orca.cardiff.ac.uk/id/eprint/120634

Citation Data

Cited 18 times in Scopus. View in Scopus. Powered By Scopus® Data

Actions (repository staff only)

Edit Item Edit Item

Downloads

Downloads per month over past year

View more statistics