Influence of biopolymer gel-coated fibres on sand reinforcement as a model of plant root behaviour

Chen, Chunhui, Wu, Li and Harbottle, Michael ORCID: https://orcid.org/0000-0002-6443-5340 2019. Influence of biopolymer gel-coated fibres on sand reinforcement as a model of plant root behaviour. Plant and Soil 438 (1-2) , pp. 361-375. 10.1007/s11104-019-04033-w

Preview

PDF - Published Version Available under License Creative Commons Attribution. Download (664kB) | Preview

Abstract

Aims The contribution of plant mucilage and microbial biofilms in the rhizosphere to the physical behaviour of roots, and therefore on geotechnical performance, is not fully understood. We explore the impact of biopolymers on the ability of fibrous inclusions in soil to resist shear loading, to test the hypothesis that biopolymer-enhanced cohesion will be most significant at shallow depths where frictional effects are less, whilst exploring the response of biopolymer to changes in the moisture regime. Methods Artificial root/biopolymer systems comprising 3D-printed fibres and xanthan gum biopolymer in sand have been tested under direct shear at low vertical normal stress (1–30 kPa). The impact of drying and wetting on the ability of the reinforced sand to resist shear was assessed. Results Fibres combined with fresh biopolymer caused an increase in mobilisable shear stress, which is proportionally more significant at lower normal stress and so shallower depth (up to 30% increase at 1 kPa). Increased shear resistance and sand aggregation were observed with progressive drying. A cyclic shear response was observed over wetting and drying cycles with considerable strengthening after drying, which was enhanced by preceding wetting increasing the biopolymer zone of influence around the fibre. Conclusions The behaviour of this idealised system attests that root-associated biopolymers contribute significantly to the stabilisation of shallow soil by creating bonds between the root and soil grains, but the response is dependent on the soil moisture regime.

Item Type:	Article
Date Type:	Publication
Status:	Published
Schools:	Engineering
Publisher:	Springer Verlag (Germany)
ISSN:	0032-079X
Date of First Compliant Deposit:	20 March 2019
Date of Acceptance:	12 March 2019
Last Modified:	03 May 2023 19:04
URI:	https://orca.cardiff.ac.uk/id/eprint/120946

Citation Data

Cited 9 times in Scopus. View in Scopus. Powered By Scopus® Data

Actions (repository staff only)

Edit Item