Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Direct and oxidative dehydrogenation of propane: From catalyst design to industrial application

Carter, James, Bere, Takudzwa, Pitchers, Jack, Hewes, Daniel, Vandegehuchte, Bart D., Kiely, Christopher ORCID: https://orcid.org/0000-0001-5412-0970, Taylor, Stuart H. ORCID: https://orcid.org/0000-0002-1933-4874 and Hutchings, Graham ORCID: https://orcid.org/0000-0001-8885-1560 2021. Direct and oxidative dehydrogenation of propane: From catalyst design to industrial application. Green Chemistry 23 (24) , pp. 9747-9799. 10.1039/D1GC03700E

[thumbnail of d1gc03700e.pdf]
Preview
PDF - Published Version
Available under License Creative Commons Attribution.

Download (4MB) | Preview

Abstract

The direct formation of propene from propane is a well-established commercial process, which based on energy consumption, is environmentally preferred to the current large-scale sources of propene from steam cracking and fluid catalytic cracking. Current sources of propane are mostly non-renewable, but the development of technologies to produce renewable “green” propane are gaining traction, which coupled with new catalytic processes will provide the platform to produce green propene. We evaluate the technological and environmental merits of dehydrogenation catalysts. Currently, non-oxidative direct dehydrogenation (DDH) is the only commercialised process, and this is reflected in the high space-time yield commonly reported over the most active Pt or Cr catalysts. However, the formation of coke necessitates multi-reactor cycling to facilitate regeneration. Oxidative dehydrogenation using O2 (ODH-O2) does not suffer from coke formation, but can lead to overoxidation, limiting the yield of propene. While no commercial processes have yet been developed, a promising new class of active and selective ODH-O2 catalysts has emerged which use boron as the active component. The use of CO2 as a soft oxidant (ODH-CO2) has also gained interest due to the environmental advantages of utilising CO2. Although this is an attractive prospect, the propene yields with these catalysts are considerably less active then DDH and ODH-O2 catalysts. Despite significant advances in the past decade, current ODH-CO2 catalysts remain far from displaying the activity levels necessary to be considered for commercial application. The specific requirements of catalyst design for each sub-reaction are discussed and we identify that the balance of acid and base sites on the catalyst surface is of paramount importance. Future catalyst design in DDH and ODH-O2 should focus on improving selectivity to propene, while ODH-CO2 catalysts are limited by their low intrinsic activity. The scarcity of some common catalytic elements is also discussed, with recommendations focusing on more abundant chemical elements. Future research should focus on the low temperature activation of CO2 as a priority. With further research and development of lower energy routes to propene based on the dehydrogenation of sustainably-sourced propane, it should be possible to transform the manufacturing landscape of this key chemical intermediate.

Item Type: Article
Date Type: Publication
Status: Published
Schools: Chemistry
Cardiff Catalysis Institute (CCI)
Additional Information: This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.
Publisher: Royal Society of Chemistry
ISSN: 1463-9262
Funders: TotalEnergies
Date of First Compliant Deposit: 18 November 2021
Date of Acceptance: 14 November 2021
Last Modified: 28 Aug 2023 17:20
URI: https://orca.cardiff.ac.uk/id/eprint/145611

Citation Data

Cited 12 times in Scopus. View in Scopus. Powered By Scopus® Data

Actions (repository staff only)

Edit Item Edit Item

Downloads

Downloads per month over past year

View more statistics