Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Numerical and experimental study of product gas characteristics in premixed ammonia/methane/air laminar flames stabilised in a stagnation flow

Kovaleva, Marina ORCID: https://orcid.org/0000-0002-6516-3658, Hayakawa, Akihiro, Colson, Sophie, Okafor, Ekenechukwu C., Kudo, Taku, Valera Medina, Agustin ORCID: https://orcid.org/0000-0003-1580-7133 and Kobayashi, Hideaki 2022. Numerical and experimental study of product gas characteristics in premixed ammonia/methane/air laminar flames stabilised in a stagnation flow. Fuel Communications 10 , 100054. 10.1016/j.jfueco.2022.100054

[thumbnail of 220214 Numerical and Exp Laminar Flame FUELC.pdf]
Preview
PDF - Published Version
Available under License Creative Commons Attribution Non-commercial No Derivatives.

Download (9MB) | Preview

Abstract

The adoption of ammonia/hydrocarbon fuel blends can be viewed as an intermediate step towards a hydrogen economy, hence the characterization of methane/ammonia flame product gas trends is essential for designing combustors for a broader range of low-carbon fuel blends while fulfilling strict NOx requirements. This paper describes the product gas content of laminar premixed ammonia/methane flames for a range of equivalence ratios and ammonia heat ratios ranging from 10% to 60%, using a strain stabilized burner at atmospheric pressure and room temperature. The optimal condition to reduce NOx emissions while maintaining below 100 ppm of unburnt NH3 emissions was found to be at equivalence ratio of 1.20 for higher ammonia ratios, moving incrementally closer over 1.35 as the methane fuel content was increased. Meanwhile, the highest measured NO values were ∼6,950 ppm at an equivalence ratio of 0.9, peaking at heat ratios of 30% to 40% at this equivalence ratio. Detailed reaction mechanisms were evaluated against the experimental data and rate constants of NO production/consumption steps featuring both NH and HNO intermediates and thermal NOx reactions were updated for Okafor's mechanism. Changes in reaction rate constants improved the mechanism accuracy for NO emissions in lean to stoichiometric flames. Meanwhile, in the rich region, modelled NO values were less responsive to changes in reaction constants, suggesting the need for an alternative approach to improve NO predictions for rich, high methane content flames. However, N2O performance in the rich region could be improved, highlighting the significance of the HNO+CONH+CO2 reaction.

Item Type: Article
Date Type: Publication
Status: Published
Schools: Advanced Research Computing @ Cardiff (ARCCA)
Engineering
Additional Information: This is an open access article under the CC BY-NC-ND license
ISSN: 2666-0520
Date of First Compliant Deposit: 14 February 2022
Date of Acceptance: 3 February 2022
Last Modified: 01 Aug 2024 13:17
URI: https://orca.cardiff.ac.uk/id/eprint/147430

Actions (repository staff only)

Edit Item Edit Item

Downloads

Downloads per month over past year

View more statistics