An experimental investigation replicating the surface behavior of ground steel gears in mixed lubrication using twin-disk testing Part 1: running-in

Britton, William ORCID: https://orcid.org/0000-0002-5388-7608, Clarke, Alastair ORCID: https://orcid.org/0000-0002-3603-6000 and Evans, Henry ORCID: https://orcid.org/0000-0002-6989-0190 2024. An experimental investigation replicating the surface behavior of ground steel gears in mixed lubrication using twin-disk testing Part 1: running-in. Tribology Transactions 10.1080/10402004.2024.2387779 Item availability restricted.

PDF - Accepted Post-Print Version Restricted to Repository staff only until 13 August 2025 due to copyright restrictions. Available under License Creative Commons Attribution Non-commercial No Derivatives. Download (2MB)

Abstract

The surface of ground gear teeth is changed during the initial period of operation through a process termed running-in. During this process asperity peaks are plastically deformed and removed to better distribute the load across the surface, resulting in modification of the surface finish. In this work the influence of pressure, slide-roll ratio, and entrainment velocity on two-dimensional surface roughness parameters is evaluated through the running-in process using a full-factorial experimental programme. Hardened steel disks are used to simulate gear tooth contacts via the use of a twin-disk rig. Results showed that all three variables strongly influence the change in surface geometry, both individually and through both two- and three-factor interactions.

Item Type:	Article
Date Type:	Published Online
Status:	In Press
Schools:	Engineering
Subjects:	T Technology > TJ Mechanical engineering and machinery
Publisher:	Taylor and Francis Group
ISSN:	1547-397X
Date of First Compliant Deposit:	7 August 2024
Date of Acceptance:	30 July 2024
Last Modified:	23 Aug 2024 06:00
URI:	https://orca.cardiff.ac.uk/id/eprint/171240

Actions (repository staff only)

Edit Item