Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Skewness based fault detection method for MVDC network

Mohan, Vageesh 2026. Skewness based fault detection method for MVDC network. PhD Thesis, Cardiff University.
Item availability restricted.

[thumbnail of Skewness Based Fault Detection Method for MVDC Networks.pdf]
Preview
PDF - Accepted Post-Print Version
Download (33MB) | Preview
[thumbnail of Cardiff University Electronic Publication Form] PDF (Cardiff University Electronic Publication Form) - Supplemental Material
Restricted to Repository staff only

Download (265kB)

Abstract

The proliferation of inverter based resources (IBRs) is a key driver for the rapid acceleration in the deployment of DC networks. Amulti-terminal DC distribution network provides a way to reliable and a flexible way to transfer power across regions. One of the factors preventing the widespread adoption of this technology is the protection strategy for DC grids. In order to close the gap and assist in the improved understanding of the protection, this thesis aims to contribute to three aspects of it; (1) Recreating and testing existing DC protection methods on a multi-terminal DC network, (2) Developing a new fast, single ended, time domain, fault detection method, (3) Testing the fault detection method in a Real Time Digital Simulator. The protection of DC grid require a deeper understanding of not just the fault current characteristic but also the limitations of the methods in terms of fault detection and wide implementation. In this thesis, a multi-terminal DC network is simulated and the fault detection methods of differential current and pearson correlation coefficient are implemented to obtain a benchmark. This is also done to understand the limitations of these methods. The differential current and the pearson correlation coefficient methods are all simulated in MATLAB/Simulink. It was found that though they offered selectivity and low computation, the robustness of the methods for faults with high transition resistances is lacking. Awavelet transform based differential current, using the differential of currents that are decomposed downto thefourth order usingDiscrete Wavelet Transform, is proposed. This methodwas foundto be able to detectfaults of upto 50Ω and50dB SNR byusingthe line differential of the decomposed fault currents for better selectivity and robustness. Though this method improves on the differential current and pearson correlation coefficient methods in terms of selectivity and ability to identify faults with high impedance, this is a double ended methodrequiring hardware setups for communication, wavelet decomposition requires longer computation times as well. Anovel fault detection method using skewness of the mode currents is proposed in this thesis. By using the mode currents the attenuation due to the impedances in the system is utilised to find internal and external faults. Coupling this with using the cumulative current values a better reading of the skewness can be achieved. This algorithm at its core provides a single ended, low computation, fast fault detection. This method is also shown to be able to detect faults of upto 200Ω. It is then tested across a variety of system operating conditions and shown to be working robustly. Another contribution of this thesis is the validation of the skewness based protection method ona hardware setup. This is done onaRealTimeDigital Simulator in which apoint to point DC networkis established. The fault detection method is modelled as a component block and the skewness of the mode currents are calculated. This is then compared to the MATLAB/Simulink simulation results. Thus this thesis provides a novel fault detection method for MVDC networks for detecting high impedance faults in a fast, robust manner.

Item Type: Thesis (PhD)
Date Type: Completion
Status: Unpublished
Schools: Schools > Engineering
Uncontrolled Keywords: 1. DC protection 2. Multi-terminal DC network 3. MVDC networks 4. Fault detection 5. Real Time Digital Simulator 6. MATLAB/Simulink 7. Discrete Wavelet Transform 8. Skewness 9. High impedance faults
Date of First Compliant Deposit: 4 November 2026
Last Modified: 04 Nov 2026 14:07
URI: https://orca.cardiff.ac.uk/id/eprint/190634

Actions (repository staff only)

Edit Item Edit Item

Downloads

Downloads per month over past year

View more statistics