Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Modelling and analysis of battery energy storage systems for grid frequency support

Jha, Vikalp ORCID: https://orcid.org/0000-0001-8279-9626 2026. Modelling and analysis of battery energy storage systems for grid frequency support. PhD Thesis, Cardiff University.
Item availability restricted.

[thumbnail of 2026VJhaPhD.docx.pdf]
Preview
PDF - Accepted Post-Print Version
Download (7MB) | Preview
[thumbnail of Cardiff University Electronic Publication Form] PDF (Cardiff University Electronic Publication Form) - Supplemental Material
Restricted to Repository staff only

Download (675kB)

Abstract

Modern power systems are experiencing a significant decline in grid inertia due to the rapid integration of inverter-based renewable energy sources. This loss of inertia leads to faster, larger frequency deviations after grid disturbances, reducing the time available for corrective action. While Battery Energy Storage Systems (BESS) are critical for frequency support, their effective deployment depends on battery management system models. High-fidelity battery models typically require proprietary electrochemical data that industrial operators cannot access. Existing active cell-balancing topologies are often too slow or lack the scalability required for large-scale BESS. Similarly, frequency support depends on power system studies, which frequently analyse grid stability and battery dynamics in isolation. This thesis addresses these gaps by developing an integrated, electrical measurement based modelling framework specifically optimised for Lithium Titanium Oxide (LTO) SCiB technology. The primary contribution to knowledge lies in three areas. The development of a physics-based Thevenin 1RC Equivalent Circuit Model (ECM) that relies exclusively on terminal voltage and current, enabling accurate state estimation for LTO chemistry without requiring internal chemical parameters. Also in development is the star-connected switched-capacitor topology featuring a unique inter-module shared capacitor (C0). This enables continuous energy redistribution across separate modules, significantly reducing hardware complexity for large-scale systems. In the next step, a framework was developed to directly couple the BESS model with the lumped Great Britain (GB) power system swing equation, allowing the assessment of sub-second Dynamic Containment (DCFR) injections on internal battery states. Achieved results demonstrate the robustness of the developed framework. The BESS model, validated with operational data from the Willenhall 2MW/1MWh BESS, accurately estimated terminal voltage, power output, and SoC. The ECM achieved an RMSE of terminal voltage of 7.4 V (NRMSE = 5.1%), while the Kalman Filter achieved 8.7 V (NRMSE = 6.0%). For SoC estimation, both the Coulomb Counting and Kalman Filter methods tracked the experimental SoC with low error (RMSE ≈ 0.57%, NRMSE ≈ 0.60%). The proposed star-connected balancing architecture achieved a steady-cycle energy efficiency of 99.1%, outperforming passive methods and reducing balancing time.

Item Type: Thesis (PhD)
Date Type: Completion
Status: Unpublished
Schools: Schools > Engineering
Uncontrolled Keywords: 1. Battery Energy Storage System 2. Frequency Response 3. Cell balancing 4. Battery modelling 5. Equivalent circuit model 6. Grid support
Funders: EPSRC iCASE STUDENTSHIP
Date of First Compliant Deposit: 4 November 2026
Last Modified: 04 Nov 2026 15:12
URI: https://orca.cardiff.ac.uk/id/eprint/190643

Actions (repository staff only)

Edit Item Edit Item

Downloads

Downloads per month over past year

View more statistics