Conversion of coal mine drainage ochre to water treatment reagent: Production, characterisation and application for P and Zn removal

Sapsford, Devin James ORCID: https://orcid.org/0000-0002-6763-7909, Santonastaso, Marco, Thorn, Peter and Kershaw, Steven 2015. Conversion of coal mine drainage ochre to water treatment reagent: Production, characterisation and application for P and Zn removal. Journal of Environmental Management 160 , pp. 7-15. 10.1016/j.jenvman.2015.06.004

Preview

PDF - Published Version Available under License Creative Commons Attribution. Download (689kB) | Preview

Abstract

Coal mine drainage ochre is a ferruginous precipitate that forms from mine water in impacted watercourses and during treatment. With thousands of tonnes per annum of such ochre arising from mine water treatment in the UK alone, management of these wastes is a substantive issue. This paper demonstrates that the ochre from both active and passive treatment of coal mine drainage can be transformed into an effective water treatment reagent by simple acid dissolution and that the reagent can be used for the removal of dissolved phosphorous from municipal wastewater and zinc from non-coal mine waters. Ochre is readily soluble in H2SO4 and HCl. Ochre is more soluble in HCl with solubilities of up to 100 g/L in 20% (w/w) HCl and 68 g/L in 10% (w/w) H2SO4. For four of the eight tested ochres solubility decreased in higher concentrations of H2SO4. Ochre compositional data demonstrate that the coal mine ochres tested are relatively free from problematic levels of elements seen by other authors from acid mine drainage-derived ochre. Comparison to British Standards for use of iron-based coagulants in drinking water treatment was used as an indicator of the acceptability of use of the ochre-derived reagents in terms of potentially problematic elements. The ochre-derived reagents were found to meet the ‘Grade 3’ specification, except for arsenic. Thus, for application in municipal wastewater and mine water treatment additional processing may not be required. There was little observed compositional difference between solutions prepared using H2SO4 or HCl. Ochre-derived reagents showed applicability for the removal of P and Zn with removals of up to 99% and 97% respectively measured for final pH 7–8, likely due to sorption/coprecipitation. Furthermore, the results demonstrate that applying a Fe dose in the form of liquid reagent leads to a better Fe:P and Fe:Zn removal ratio compared to ochre-based sorption media tested in the literature.

Item Type:	Article
Date Type:	Publication
Status:	Published
Schools:	Engineering Water Research Institute (WATER)
Subjects:	T Technology > TC Hydraulic engineering. Ocean engineering
Uncontrolled Keywords:	Valorisation; Iron; Sludge; Mine water
Publisher:	Elsevier
ISSN:	0301-4797
Date of First Compliant Deposit:	30 March 2016
Date of Acceptance:	3 June 2015
Last Modified:	04 May 2023 00:32
URI:	https://orca.cardiff.ac.uk/id/eprint/82306

Citation Data

Cited 25 times in Scopus. View in Scopus. Powered By Scopus® Data

Actions (repository staff only)

Edit Item