Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Heat and moisture transfer behaviour in Phyllostachys edulis (Moso bamboo) based panels

Huang, Puxi, Chew, Y.M.John, Chang, Wen-Shao, Ansell, Martin P., Lawrence, Mike, Latif, Eshrar ORCID: https://orcid.org/0000-0003-3982-6929, Shea, Andy, Ormondroyd, Graham and Du, Hu ORCID: https://orcid.org/0000-0002-1637-0626 2018. Heat and moisture transfer behaviour in Phyllostachys edulis (Moso bamboo) based panels. Construction and Building Materials 166 , pp. 35-49. 10.1016/j.conbuildmat.2018.01.092

[thumbnail of Heat and moisture transfer bamboo panels revision final.pdf]
Preview
PDF - Accepted Post-Print Version
Available under License Creative Commons Attribution Non-commercial No Derivatives.

Download (3MB) | Preview

Abstract

This study focuses on the heat and moisture transfer behaviours in the Phyllostachys edulis (Moso bamboo) panels at various temperature and relative humidity (RH) conditions. Moso bamboo panels with different lamination methods were prepared by assembling bamboo strips from different layers of the bamboo culm wall. Dynamic coupled heat and moisture transfer experiments were conducted. Unsteady state numerical modelling was conducted by COMSOL MultiphysicsTM. A rigorous approach was adopted in this paper. A series of parametric studies of numerical simulation are firstly presented in this paper and then validated by the experiments. Both experimental and simulation results appear to be consistent with the results of measurements of the basic hygrothermal parameters, which demonstrates the robustness of the results. The temperature and RH results indicated that although the panel made from layers of the internal part of bamboo culm wall can provide good insulation performance, its ability to resist high RH variation is inferior to the layer from the external part of bamboo culm wall. The parametric study found that density is the most critical parameters to influence the temperature distributions in the transient state. The thermal conductivity dominates the temperature variation in the steady state. The water vapour diffusion resistance factor is the key parameter which influences the RH simulation results. Numerical simulation with moisture transfer shows better consistency than the simulation without moisture in both equilibrium and transient states. The results of this study demonstrated that the external part of the bamboo culm wall can be utilised to minimise the RH variation of the panel while the internal part is suitable for increasing the thermal insulation performance of the panel.

Item Type: Article
Date Type: Publication
Status: Published
Schools: Architecture
Additional Information: This is an open access article under the terms of the Creative Commons Attribution-NonCommercial-NoDerivs License
Publisher: Elsevier
ISSN: 0950-0618
Date of First Compliant Deposit: 24 January 2018
Date of Acceptance: 18 January 2018
Last Modified: 15 Nov 2023 08:46
URI: https://orca.cardiff.ac.uk/id/eprint/108418

Citation Data

Cited 12 times in Scopus. View in Scopus. Powered By Scopus® Data

Actions (repository staff only)

Edit Item Edit Item

Downloads

Downloads per month over past year

View more statistics