Atia, Abdulhamid ORCID: https://orcid.org/0000-0003-0683-5052, Anayi, Fatih ORCID: https://orcid.org/0000-0001-8408-7673 and Min, Gao ORCID: https://orcid.org/0000-0001-9591-5825 2020. Improving accuracy of solar cells parameters extraction by minimum root mean square error. Presented at: 55th International Universities Power Engineering Conference (UPEC 2020), Virtual - Torino, Italy, 1-4 Sept 2020. 2020 55th International Universities Power Engineering Conference (UPEC). IEEE, 10.1109/UPEC49904.2020.9209780 |
Preview |
PDF
- Accepted Post-Print Version
Download (524kB) | Preview |
Abstract
This paper presents a technique for enhancing the accuracy of parameters extraction of photovoltaic (PV) cells from experimental current-voltage (I-V) curve. This technique is based on entering nearly all the possible points of an I-V curve to extract the slopes near the open circuit voltage and short circuit current to determine approximate values of the series and shunt resistance, respectively. These values are utilised to find accurate values of the five parameters of the single diode model based on an analytical method from the literature. The calculated I-V curves from all groups of points are then compared with the experimental one and the curve that provides the minimum root mean square error (RMSE) is selected as the best fit. Experimental results are provided in this paper to validate the approach. The results show that the analytical method can become more accurate than iterative/numerical methods if the points used to calculate the slopes are properly selected.
Item Type: | Conference or Workshop Item (Paper) |
---|---|
Date Type: | Published Online |
Status: | Published |
Schools: | Engineering |
Publisher: | IEEE |
ISBN: | 9781728110790 |
Date of First Compliant Deposit: | 7 December 2020 |
Date of Acceptance: | 30 June 2020 |
Last Modified: | 27 Nov 2022 12:45 |
URI: | https://orca.cardiff.ac.uk/id/eprint/136578 |
Citation Data
Cited 1 time in Scopus. View in Scopus. Powered By Scopus® Data
Actions (repository staff only)
Edit Item |