Effect of TiB2 addition on microstructure and mechanical properties of AA8009 alloy fabricated by laser additive manufacturing

Xiong, Xinxing, Yu, Sijie, Wang, Pei, Qi, Junfang, Li, Haichao, Wang, Xulei, Ryan, Michael ORCID: https://orcid.org/0000-0002-8104-0121, Bhaduri, Debajyoti ORCID: https://orcid.org/0000-0002-8270-388X and Setchi, Rossitza ORCID: https://orcid.org/0000-0002-7207-6544 2024. Effect of TiB2 addition on microstructure and mechanical properties of AA8009 alloy fabricated by laser additive manufacturing. Acta Metallurgica Sinica (English Letters) 37 (1) , pp. 67-77. 10.1007/s40195-023-01615-7 Item availability restricted.

PDF - Accepted Post-Print Version Restricted to Repository staff only until 24 October 2024 due to copyright restrictions. Download (8MB)

Abstract

The research involves the addition of 5 vol.% TiB2 particles into AA8009 alloy powder to synthesize TiB2/AA8009 composite parts produced via laser powder bed fusion (LPBF). The addition of the TiB2 particles causes the TiB2/AA8009 composites with and without annealing have lower compressive strength than AA8009 alloy due to the change of the strengthening mechanism. The results further indicated that solid solution strengthening was the main strengthening mechanism of the LPBF AA8009 alloy at room temperature whereas Orowan strengthening became the primary strengthening factor after annealing at 673 K. In contrast, Orowan strengthening always remained the main strengthening mechanism for the TiB2/AA8009 composite, irrespective of the annealing temperature. In addition, after annealing of the LPBF parts at 673 K, the compressive yield strength (CYS) of the unblended AA8009 alloy specimens had a ~ 2.5 times greater reduction (from 705 ± 16 to 459 ± 30 MPa) compared to that of the composite TiB2/AA8009 samples (from 466 ± 23 to 368 ± 3 MPa). Therefore, TiB2 particles can suppress the drop in yield strength of LPBF AA8009 alloy below 673 K, providing a theoretical and experimental basis for the applications of both LPBF AA8009 and TiB2/AA8009 alloys at low and medium temperatures.

Item Type:	Article
Date Type:	Publication
Status:	Published
Schools:	Engineering
Publisher:	Springer
ISSN:	1006-7191
Date of First Compliant Deposit:	24 October 2023
Date of Acceptance:	28 August 2023
Last Modified:	13 Mar 2024 17:47
URI:	https://orca.cardiff.ac.uk/id/eprint/163478

Actions (repository staff only)

Edit Item