Browse by Current Cardiff authors

2024. Effect of TiB2 addition on microstructure and mechanical properties of AA8009 alloy fabricated by laser additive manufacturing. Acta Metallurgica Sinica (English Letters) 37 (1) , pp. 67-77. 10.1007/s40195-023-01615-7

Arcos, C., Ramos-Grez, J.A., Sancy, M., La Fé-Perdomo, I., Setchi, R.

and Guerra, C. 2024. Suitability of nickel aluminium bronze alloy fabricated by laser powder bed fusion to be used in the marine environment. Corrosion Science 226 , 111656. 10.1016/j.corsci.2023.111656

Andrews, Megan and Setchi, Rossitza

2023. Integrated Analysis of EEG and eye tracking to measure emotional responses in a simulated healthcare setting. Procedia Computer Science 225 , pp. 2047-2056. 10.1016/j.procs.2023.10.195

Luo, Zhichao, Tang, Qian, Feng, Qixiang, Ma, Shuai, Song, Jun, Setchi, Rossitza

, Guo, Fuyu and Zhang, Yuanhang 2023. Finite element analysis of the mechanical properties of sheet- and skeleton-gyroid Ti6Al4V structures produced by laser powder bed fusion. Thin-Walled Structures 192 , 111098. 10.1016/j.tws.2023.111098

Zhang, Zhenhua, Han, Quanquan, Liu, Zhongyi, Wang, Liqiao, Zhang, Han, Zhao, Peng, Zhu, Guoliang, Huang, Chuanzhen and Setchi, Rossitza

2023. Cracking behaviour and its suppression mechanisms with TiB2 additions in the laser additive manufacturing of solid-solution-strengthened Ni-based alloys. Composites Part B: Engineering 266 10.1016/j.compositesb.2023.111023

Pekok, Mulla Ahmet

, Setchi, Rossi

, Brousseau, Emmanuel

, Han, Quanquan and Gu, Dongdong 2023. Graphene nanoplatelets reinforced Al-Cu-Mg composite fabricated using laser powder bed fusion: microstructure, mechanical properties, and wear behaviour. International Journal of Advanced Manufacturing Technology 128 , pp. 1597-1613. 10.1007/s00170-023-12016-6

Esguerra-Arce, A., Pinto-Arciniegas, G., Silva-Hurtado, S., Setchi, Rossi

and Esguerra-Arce, J. 2023. Study of aluminum-iron oxide composites obtained by die pressing of industrial by-oroducts. JOM: The Journal of the Minerals, Metals and Materials Society 10.1007/s11837-023-05993-2

Liu, Zhongyi, Han, Quanquan, Zhang, Zhenhua, Wang, Liqiao, Ma, Teng, Gao, Zhengjiang, Song, Bo, Liu, Hanlian, Huang, Chuanzhen and Setchi, Rossitza

2023. Design of a novel crack-free precipitation-strengthened nickel-based superalloy and composites for laser powder bed fusion. Virtual and Physical Prototyping 18 (1) , e2224769. 10.1080/17452759.2023.2224769

Ma, Chenglong, Ge, Qing, Yuan, Luhao, Gu, Dongdong, Dai, Donghua, Setchi, Rossitza

, Wu, Meiping, Liu, Yu, Li, Dongya, Ma, Shuai, Peng, Xin and Fang, Ziyu 2023. The development of laser powder bed fused nano-TiC/NiTi superelastic composites with hierarchically heterogeneous microstructure and considerable tensile recoverable strain. Composites Part B: Engineering 250 , 110457. 10.1016/j.compositesb.2022.110457

Zhang, Xiaoji, Setchi, Rossitza

, Giasin, Khaled, Gu, Heng, Han, Quanquan, Ryan, Michael

and Hopkins, Andrew 2023. Lightweight tooling for concentric collet drilling templates. Scholz, Steffen, Howlett, Robert and Setchi, Rossi, eds. Sustainable Design and Manufacturing Proceedings of the 9th International Conference on Sustainable Design and Manufacturing (SDM 2022), Vol. 338. Springer, pp. 77-87. (10.1007/978-981-19-9205-6_8)

Ahmadinia, Masoud

, Velenturf, Anne, Setchi, Rossi

, Evans, Sam L.

, McKendree, Jean and Bolton, Jon 2023. Transforming the uk metal industries: challenges and opportunities. Presented at: International Conference on Sustainable Design and Manufacturing, Split, Croatia, 14-16 September 2022. International Conference on Sustainable Design and Manufacturing. Smart Innovation, Systems and Technologies , vol.338 pp. 43-56. 10.1007/978-981-19-9205-6_5

Chen, Junshen, Mohammed, Abdullah, Alexopoulos, Theocharis and Setchi, Rossitza

2023. Collaborative human-robot assembly: Methodology, simulation and industrial validation. Presented at: SDM 2022: Sustainable Design and Manufacturing, Split, Croatia, 14-16 September 2022. Published in: Scholz, Steffen G., Howlett, Robert J. and Setchi, Rossi eds. Sustainable Design and Manufacturing: Proceedings of the 9th International Conference on Sustainable Design and Manufacturing (SDM 2022). Smart Innovation, Systems and Technologies , vol.338 pp. 181-190. 10.1007/978-981-19-9205-6_17

Song, Jun, Tang, Qian, Setchi, Rossitza

and Ryan, Michael

2023. A comparative study of pulse wave and continuous wave laser patterns during laser powder bed fusion. Presented at: International Conference on Sustainable Design and Manufacturing, Split, Croatia, 14-16 September 2022. Sustainable Design and Manufacturing. , vol.338 10.1007/978-981-19-9205-6_27

Ma, Shuai, Tang, Qian, Zhu, Changbao, Wang, Fuyou, Feng, Qixiang, Song, Jun, Setchi, Rossitza

, Ma, Chenglong and Tao, Ran 2022. Laser powder bed fusion-built Ti6Al4V bone scaffolds composed of sheet and strut-based porous structures: Morphology, mechanical properties, and biocompatibility. Chinese Journal of Mechanical Engineering: Additive Manufacturing Frontiers 1 (4) , 100051. 10.1016/j.cjmeam.2022.100051

Yu, S.J., Wang, P., Li, H.C., Setchi, Rossitza

, Wu, M.W., Liu, Z.Y., Chen, Z.W., Waqar, S. and Zhang, L.C. 2022. Heterogeneous microstructure and mechanical behaviour of Al-8.3Fe-1.3V-1.8Si alloy produced by laser powder bed fusion. Virtual and Physical Prototyping 18 (1) , e2155197. 10.1080/17452759.2022.2155197

Pekok, Mulla Ahmet

, Gu, Heng, Han, Quanquan and Gu, Dongdong 2022. Al-Cu-Mg alloy powder reinforced with graphene nanoplatelets: morphology, flowability and discrete element simulation. Journal of Manufacturing and Materials Processing 6 (6) , 148. 10.3390/jmmp6060148

Veeramani, Satheeshkumar, Muthuswamy, Sreekumar and Setchi, Rossitza

2022. Coordination and path planning of a heterogeneous multi-robot system for sheet metal drilling. Procedia Computer Science 207 , pp. 2335-2344. 10.1016/j.procs.2022.09.292

Wang, Xiaodan, Setchi, Rossitza

and Mohammed, Abdullah 2022. Modelling uncertainties in human-robot industrial collaborations. Procedia Computer Science 207 , pp. 3652-3661. 10.1016/j.procs.2022.09.425

Tong, Tong, Setchi, Rossitza

and Hicks, Yulia

2022. Context change and triggers for human intention recognition. Procedia Computer Science 207 , pp. 3826-3835. 10.1016/j.procs.2022.09.444

Munguia Galeano, Francisco

2022. Context-sensitive personalities and behaviors for robots. Procedia Computer Science 207 , pp. 2325-2334. 10.1016/j.procs.2022.09.291

Ma, Chenglong, Gu, Dongdong, Setchi, Rossitza

, Dai, Donghua, Wu, Meiping, Ma, Shuai and Miao, Xiaojin 2022. A large compressive recoverable strain induced by heterogeneous microstructure in a Ni50.6Ti49.4 shape memory alloy via laser powder bed fusion and subsequent aging treatment. Journal of Alloys and Compounds 918 , 165620. 10.1016/j.jallcom.2022.165620

Yang, Xintong

, Ji, Ze

, Wu, Jing

, Lai, Yu-kun

, Wei, Changyun, Liu, Guoliang and Setchi, Rossitza

2022. Hierarchical reinforcement learning with universal policies for multi-step robotic manipulation. IEEE Transactions on Neural Networks and Learning Systems 33 (9) , pp. 4727-4741. 10.1109/TNNLS.2021.3059912

Song, Jun, Tang, Qian, Chen, Hao, Zhang, Zhiqing, Feng, Qixiang, Zhao, Mingqiang, Ma, Shuai and Setchi, Rossitza

2022. Laser powder bed fusion of high-strength maraging steel with concurrently enhanced strength and ductility after heat treatments. Materials Science and Engineering: A 854 , 143818. 10.1016/j.msea.2022.143818

Wang, Lei, Ji, Ze

and Setchi, Rossi

2022. Collaboration of KUKA robots on adjusting assembly of motion mechanism. Presented at: Eighth Asia International Symposium on Mechatronics (AISM 2021), 16-19 December 2021. Published in: Duan, Baoyan, Umeda, Kazunori and Kim, Chang-wan eds. Proceedings of the Eighth Asia International Symposium on Mechatronics. Lecture Notes in Electrical Engineering , vol.885 10.1007/978-981-19-1309-9_100

Song, Jun, Tang, Qian, Feng, Qixiang, Han, Quanquan, Ma, Shuai, Chen, Hao, Guo, Fuyu and Setchi, Rossitza

2022. Effect of remelting processes on the microstructure and mechanical behaviours of 18Ni-300 maraging steel manufactured by selective laser melting. Materials Characterization 184 , 111648. 10.1016/j.matchar.2021.111648

Mason, Benjamin

and Bhaduri, Debajyoti

2022. Development of a novel laser polishing strategy for additively manufactured AlSi10Mg alloy parts. Presented at: 9th International Conference on Sustainable Design and Manufacturing - SDM 2022, Split, Croatia, 16-17 September 2022.

Mason, Benjamin

, Bhaduri, Debajyoti

and Kundu, Abhishek

2022. Laser polishing of additively manufactured aluminium surfaces. Presented at: 1st International Conference on Advanced Manufacturing for Air, Space and Land Transportation, Virtual, 7-10 March 2022.

Han, Quanquan, Low, Kenny W.Q., Gu, Yuchen, Wang, Xiaobo, Wang, Liqiao, Song, Bo, Huang, Chuanzhen and Setchi, Rossitza

2021. The dynamics of reinforced particle migration in laser powder bed fusion of Ni-based composite. Powder Technology 394 , pp. 714-723. 10.1016/j.powtec.2021.09.005

Gu, Heng, Wei, Chao, Li, Lin, Ryan, Michael

, Han, Quanquan and Qian, Lili 2021. Numerical and experimental study of molten pool behaviour and defect formation in multi-material and functionally graded materials laser powder bed fusion. Advanced Powder Technology 32 (11) , pp. 4303-4321. 10.1016/j.apt.2021.09.036

Wang, Pei, Lei, Yang, Qi, Jun-Fang, Yu, Si-Jie, Setchi, Rossitza

, Wu, Ming-Wei, Eckert, Jürgen, Li, Hai-Chao and Scudino, Sergio 2021. Wear behavior of a heat-treatable Al-3.5Cu-1.5 Mg-1Si alloy manufactured by selective laser melting. Materials 14 (22) , 7048. 10.3390/ma14227048

Banitalebi Dehkordi, Maryam

, Mansy, Reda, Zaraki, Abolfazl

, Singh, Arpit and Setchi, Rossitza

2021. Explainability in human-robot teaming. Procedia Computer Science 192 , pp. 3487-3496. 10.1016/j.procs.2021.09.122

Banitalebi Dehkordi, Maryam

, Zaraki, Abolfazl

2021. Optimal feature set for smartphone-based activity recognition. Procedia Computer Science 192 , pp. 3497-3506. 10.1016/j.procs.2021.09.123

Scholz, Steffen, Howlette, Robert J. and Setchi, Rossi

, eds. 2021. Sustainable design and manufacturing: Proceedings of the 8th International Conference on Sustainable Design and Manufacturing (KES-SDM 2021). Smart Innovation, Systems and Technologies, Springer.

Zhang, Zhenhua, Han, Quanquan, Yang, Shengzhao, Yin, Yingyue, Gao, Jian and Setchi, Rossitza

2021. Laser powder bed fusion of advanced submicrometer TiB2 reinforced high-performance Ni-based composite. Materials Science and Engineering: A 817 , 141416. 10.1016/j.msea.2021.141416

Gu, Dongdong, Shi, Xinyu, Poprawe, Reinhart, Bourell, David L., Setchi, Rossitza

and Zhu, Jihong 2021. Material-structure-performance integrated laser-metal additive manufacturing. Science 372 (6545) , eabg1487. 10.1126/science.abg1487

Latham, J., Hicks, Y. A.

, Yang, X.

, Setchi, R.

and Rainer, T.

2021. Stable automatic envelope estimation for noisy doppler ultrasound. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control 68 (3) , pp. 465-481. 10.1109/TUFFC.2020.3011823

Setchi, Rossitza

, Spasic, Irena

, Morgan, Jeffrey, Harrison, Christopher and Corken, Richard 2021. Artificial intelligence for patent prior art searching. World Patent Information 64 , 102021. 10.1016/j.wpi.2021.102021

Liu, Yang, Xu, Huaizhong, Zhu, Lei, Wang, Xiaofeng, Han, Quanquan, Li, Shuxin, Wang, Yonggang, Setchi, Rossitza

and Wang, Di 2021. Investigation into the microstructure and dynamic compressive properties of selective laser melted Ti–6Al–4V alloy with different heating treatments. Materials Science and Engineering: A 805 , 140561. 10.1016/j.msea.2020.140561

Pekok, M. A.

, Setchi, R.

and Ryan, M.

2021. Effect of process parameters on the microstructure and mechanical properties of AA2024 fabricated using selective laser melting. International Journal of Advanced Manufacturing Technology 112 , pp. 175-192. 10.1007/s00170-020-06346-y

Gao, Shan, Tan, Ah-Hwee and Setchi, Rossi

2021. Learning ADL daily routines with spatiotemporal neural networks. IEEE Transactions on Knowledge and Data Engineering 33 (1) , pp. 143-153. 10.1109/TKDE.2019.2924623

Han, Quanquan, Gu, Yuchen, Huang, Jun, Wang, Liqiao, Low, Kenny W. Q., Feng, Qixiang, Yin, Yingyue and Setchi, Rossitza

2020. Selective laser melting of Hastelloy X nanocomposite: Effects of TiC reinforcement on crack elimination and strength improvement. Composites Part B: Engineering 202 , 108442. 10.1016/j.compositesb.2020.108442

Ma, Shuai, Tang, Qian, Han, Xiaoxiao, Feng, Qixiang, Song, Jun, Setchi, Rossitza

, Liu, Ying

, Liu, Yang

, Goulas, Athanasios, S. Engstrøm, Daniel, Tse, YauYau and Zhen, Ni 2020. Manufacturability, mechanical properties, mass-transport properties and biocompatibility of Triply Periodic Minimal Surface (TPMS) scaffolds fabricated by selective laser melting. Materials and Design 195 , 109034. 10.1016/j.matdes.2020.109034

Han, Quanquan, Gu, Yuchen, Wang, Liqiao, Feng, Qixiang, Gu, Heng, Johnston, Richard and Setchi, Rossitza

2020. Effects of TiC content on microstructure and mechanical properties of nickel-based hastelloy X nanocomposites manufactured by selective laser melting. Materials Science and Engineering: A 796 , 140008. 10.1016/j.msea.2020.140008

Robinson, Michael, Han, Quanquan, Gu, Heng, Soe, Shwe and Setchi, Rossitza

2020. The effect of heat treatment of AlSi10Mg on the energy absorption performance of surface-based structures. Presented at: 7th International Conference on Sustainable Design and Manufacturing KES-SDM 2020, Virtual, 9-11 Sept 2020. Published in: Scholtz, Steffen G., Howlett, Robert J. and Setchi, Rossi eds. Sustainable Design and Manufacturing 2020. , vol.200 Springer, pp. 395-402. 10.1007/978-981-15-8131-1_35

Pekok, Mulla

and Han, Quanquan 2020. Effect of milling speed and time on graphene-reinforced AA2024 powder. Presented at: 7th International Conference on Sustainable Design and Manufacturing KES-SDM 2020, Virtual, 9-11 Sept 2020. Published in: Scholz, Steffen G., Howlett, Robert J. and Setchi, Rossi eds. Sustainable Design and Manufacturing 2020. Smart Innovation, Systems and Technologies , vol.200 Springer, pp. 215-225. 10.1007/978-981-15-8131-1_20

Ma, Chenglong, Gu, Dongdong, Gao, Jie, Chen, Wei, Song, Yingjie and Setchi, Rossitza

2020. Mechanical behavior of NiTi-based circular tube chiral structure manufactured by selective laser melting. Presented at: 7th International Conference on Sustainable Design and Manufacturing KES-SDM 2020, Virtual, 9-11 September 2020. Published in: Scholz, Steffen G., Howlett, Robert J. and Setchi, Rossi eds. Sustainable Design and Manufacturing 2020: Proceedings of the 7th International Conference on Sustainable Design and Manufacturing (KES-SDM 2020). Smart Innovation, Systems and Technologies , vol.200 Singapore: pp. 227-237. 10.1007/978-981-15-8131-1_21

Song, Jun, Tang, Qian, Feng, Qixiang, Ma, Shuai, Han, Quanquan and Setchi, Rossitza

2020. Effect of remelting process on surface quality and tensile behaviour of a maraging steel manufactured by selective laser melting. Presented at: SDM-2020: 7th International Conference on Sustainable Design and Manufacturing, 9-11 September. Published in: Scholz, Steffen G., Howlett, Robert J. and Setchi, Rossi eds. Sustainable Design and Manufacturing 2020: Proceedings of the 7th International Conference on Sustainable Design and Manufacturing (KES-SDM 2020). Smart Innovation, Systems and Technologies , vol.200 Springer, pp. 251-260. 10.1007/978-981-15-8131-1_23

Ma, Shuai, Tang, Qian, Feng, Qixiang, Song, Jun, Liu, Ying

2020. An investigation of the porosity effects on the mechanical properties and the failure modes of Ti–6Al–4V Schwarz primitive structures. Presented at: SDM-2020: 7th International Conference on Sustainable Design and Manufacturing, 9-11 September 2020. Published in: Scholz, Steffen G., Howlett, Robert J. and Setchi, Rossi eds. Sustainable Design and Manufacturing 2020: Proceedings of the 7th International Conference on Sustainable Design and Manufacturing (KES-SDM 2020). Smart Innovation, Systems and Technologies , vol.200 Springer, pp. 173-181. 10.1007/978-981-15-8131-1_16

Sukor, Abdul Syafiq Abdull, Setchi, Rossi

and Ji, Ze

2020. Abnormality detection approach in smart homes using case-based reasoning. Presented at: IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS), Virtual (Shah Alam, Malaysia), 20 June 2020. IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS 2020). IEEE, pp. 176-181. 10.1109/I2CACIS49202.2020.9140077

Liang, Dan, Wu, Xiaocheng, Chen, Junshen and Setchi, Rossitza

2020. A novel hand gesture recognition method based on illumination compensation and grayscale adjustment. Presented at: KES International Conference on Human-Centred Intelligent Systems, Virtual, 17-19 June 2020. Published in: Zimmermann, Alfred, Howlett, Robert J. and Jain, Lakhmi C. eds. Human Centred Intelligent Systems. Smart Innovation, Systems and Technologies , vol.189 pp. 115-125. 10.1007/978-981-15-5784-2_10

Han, Quanquan, Gu, Yuchen, Soe, Shwe, Lacan, Franck

2020. Effect of hot cracking on the mechanical properties of Hastelloy X superalloy fabricated by laser powder bed fusion additive manufacturing. Optics and Laser Technology 124 , 105984. 10.1016/j.optlastec.2019.105984

Gu, Heng, Wei, Chao, Li, Lin, Han, Quanquan, Setchi, Rossitza

and Li, Qian 2020. Multi-physics modelling of molten pool development and track formation in multi-track, multi-layer and multi-material selective laser melting. International Journal of Heat and Mass Transfer 151 , 119458. 10.1016/j.ijheatmasstransfer.2020.119458

Setchi, Rossi

and Spasic, Irena

2020. AI-assisted patent prior art searching - feasibility study. The Intellectual Property Office. Available at: https://www.gov.uk/government/publications/ai-assi...

Umemura, Kanta, Kawanaka, Hiroharu, Hicks, Yulia

, Takamatsu, Daisuke and Tsuruoka, Shinji 2020. A study on classification using machine learning for dementia evaluation. Presented at: IEEE 2nd Global Conference on Life Sciences and Technologies (LifeTech 2020), Kyoto, Japan, 10-12 March 2020. 2020 IEEE 2nd Global Conference on Life Sciences and Technologies (LifeTech). IEEE, pp. 101-103. 10.1109/LifeTech48969.2020.1570619133

Banitalebi Dehkordi, Maryam

, Zaraki, Abolfazl

2020. Feature extraction and feature selection in smartphone-based activity recognition. Procedia Computer Science 176 , pp. 2655-2664. 10.1016/j.procs.2020.09.301

Setchi, Rossitza

, Banitalebi Dehkordi, Maryam

and Khan, Juwairiya Siraj 2020. Explainable robotics in human-robot interactions. Procedia Computer Science 176 , pp. 3057-3066. 10.1016/j.procs.2020.09.198

Han, Quanquan, Gu, Yuchen, Setchi, Rossitza

, Johnston, Richard, Evans, Sam L.

and Yang, Shoufeng 2019. Additive manufacturing of high-strength crack-free Ni-based Hastelloy X superalloy. Additive Manufacturing 30 , 100919. 10.1016/j.addma.2019.100919

Song, Jun, Tang, Qian, Feng, Qixiang, Ma, Shuai, Setchi, Rossitza

, Liu, Ying

, Han, Quanquan, Fan, Xiaojie and Zhang, Mengxiang 2019. Effect of heat treatment on microstructure and mechanical behaviours of 18Ni-300 maraging steel manufactured by selective laser melting. Optics and Laser Technology 120 , 105725. 10.1016/j.optlastec.2019.105725

Chen, Junshen, Ji, Ze

, Niu, Hanlin, Setchi, Rossitza

and Yang, Chenguang 2019. An auto-correction teleoperation method for a mobile manipulator using gaze tracking and hand motion detection. Presented at: 20th Towards Autonomous Robotic Systems Conference (TAROS), London, UK, 3-5 July 2019. TAROS 2019: Towards Autonomous Robotic Systems. , vol.11650 Springer, pp. 422-433. 10.1007/978-3-030-25332-5_36

Han, Quanquan, Gu, Heng and Setchi, Rossitza

2019. Discrete element simulation of powder layer thickness in laser additive manufacturing. Powder Technology 352 , pp. 91-102. 10.1016/j.powtec.2019.04.057

Sukor, Abdul Syafiq Abdull, Zakaria, Ammar, Rahim, Norasmadi Abdul, Kamarudin, Latifah Munirah, Setchi, Rossitza

, Nishizaki, Hiromitsu, Vijayakumar, V., Subramaniyaswamy, V., Abawajy, Jemal and Yang, Longzhi 2019. A hybrid approach of knowledge-driven and data-driven reasoning for activity recognition in smart homes. Journal of Intelligent and Fuzzy Systems 36 (5) , pp. 4177-4188. 10.3233/JIFS-169976

Bhaduri, Debajyoti

, Alexandridis, Alexandros, Soe, Shwe, Setchi, Rossi

, Pugh, James and Tibbetts, Nicole 2019. Evaluation of the surface integrity of aeroengine components following needle peening. Presented at: CIRP Winter Meeting 2019, Paris, France, 20-22 Feb 2019.

Sukor, Abdul Syafiq Abdull, Zakaria, Ammar, Rahim, Norasmadi Abdul and Setchi, Rossitza

2018. Semantic knowledge base in support of activity recognition in smart home environments. International Journal of Engineering and Technology 7 (4) , pp. 67-72.

Han, Quanquan, Gu, Heng, Soe, Shwe, Setchi, Rossi

and Hill, Jacob 2018. Manufacturability of AlSi10Mg overhang structures fabricated by laser powder bed fusion. Materials & Design 160 , pp. 1080-1095. 10.1016/j.matdes.2018.10.043

Al-Saadi, Ahmed, Setchi, Rossitza

and Hicks, Yulia

2018. Semantic reasoning in cognitive networks for heterogeneous wireless mesh systems. IEEE Transactions on Cognitive Communications and Networking 3 (3) , pp. 374-389. 10.1109/TCCN.2017.2712136

Mohammed, Ahmed, Setchi, Rossitza

, Filip, Misha, Harris, Irina

and Li, Xiadong 2018. An integrated methodology for a sustainable two-stage supplier selection and order allocation problem. Journal of Cleaner Production 192 , pp. 99-114. 10.1016/j.jclepro.2018.04.131

Han, Quanquan, Mertens, Raya, Montero-Sistiaga, Maria L., Yang, Shoufeng, Setchi, Rossitza

, Vanmeensel, Kim, Van Hooreweder, Brecht, Evans, Samuel L.

and Fan, Haiyang 2018. Laser powder bed fusion of Hastelloy X: effects of hot isostatic pressing and the hot cracking mechanism. Materials Science and Engineering: A 732 , pp. 228-239. 10.1016/j.msea.2018.07.008

Prickett, Paul

and Romli, Awanis 2018. Eco-design case-based reasoning tool: the integration of ecological quality function deployment and case-based reasoning methods for supporting sustainable product design. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232 (10) , pp. 1778-1797. 10.1177/0954405416668928

Feng, Q., Tang, Q., Liu, Z., Liu, Ying

and Setchi, Rossitza M.

2018. An investigation of the mechanical properties of metallic lattice structures fabricated using selective laser melting. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 232 (10) , pp. 1719-1730. 10.1177/0954405416668924

Setchi, Rossitza

and Asikhia, O.K. 2018. Evaluating the affective aspect of intuitive interactions using image schemas. Journal of Computing and Information Science in Engineering 18 (4) , 041006. 10.1115/1.4040606

Ji, Ze

, Schruoffeneger, Raphael and Setchi, Rossitza

2018. Autonomous 3D scene understanding and exploration in cluttered workspaces using point cloud data. Presented at: 2018 IEEE 15th International Conference on Networking, Sensing and Control (ICNSC), Zhuhai, China, 27-29 March 2018. 2018 IEEE 15th International Conference on Networking, Sensing and Control (ICNSC). IEEE, 10.1109/ICNSC.2018.8361275

Yeung, C.L., Wang, W.M., Cheung, C.F., Tsui, Eric, Setchi, Rossitza

and Lee, Rongbin W.B. 2018. Computational narrative mapping for the acquisition and representation of lessons learned knowledge. Engineering Applications of Artificial Intelligence 71 , pp. 190-209. 10.1016/j.engappai.2018.02.011

Clark, Nicholas

, Jones, Nick, Setchi, Rossitza

and Porch, Adrian

2018. Particle size characterisation of metals powders for additive manufacturing using a microwave sensor. Powder Technology 327 , pp. 536-543. 10.1016/j.powtec.2017.11.042

Feng, Qixiang, Tang, Qian, Liu, Ying

, Soe, Shwe, Ma, Shuai and Bai, Long 2018. Quasi-static analysis of mechanical properties of Ti6Al4V lattice structures manufactured using selective laser melting. International Journal of Advanced Manufacturing Technology 94 (5-8) , pp. 2301-2313. 10.1007/s00170-017-0932-7

Mohammed, Ahmed, Filip, Misha, Setchi, Rossitza

and Li, Xiaodong 2017. Drafting a fuzzy TOPSIS-multi-objective approach for a sustainable supplier selection. Presented at: 23rd International Conference on Automation & Computing (ICAC 2017), Huddersfield, England, 7-8 September 2017. Proceedings of the 23rd International Conference on Automation & Computing. IEEE, p. 1. 10.23919/IConAC.2017.8082017

Han, Quanquan, Geng, Yanquan, Setchi, Rossitza

, Gu, Dongdong and Evans, Sam L.

2017. Macro and nanoscale wear behaviour of Al-Al 2 O 3 nanocomposites fabricated by selective laser melting. Composites Part B: Engineering 127 , pp. 26-35. 10.1016/j.compositesb.2017.06.026

Mohammed, Ahmed, Filip, Misha, Setchi, Rossitza

and Li, Xiaodong 2017. Drafting a fuzzy TOPSIS-multi-objective approach for a sustainable supplier selection. Presented at: 2017 23rd International Conference on Automation and Computing (ICAC), Huddersfield, 7 - 8 September 2017. pp. 302-307. 10.23919/IConAC.2017.8082017

Harbi, Zainab, Hicks, Yulia

2017. Clock drawing test interpretation system. Procedia Computer Science 112 , pp. 1641-1650. 10.1016/j.procs.2017.08.259

Han, Quanquan, Setchi, Rossitza

, Gu, Dongdong and Evans, Samuel L.

2017. Selective laser melting of advanced Al-Al 2 O 3 nanocomposites: simulation, microstructure and mechanical properties. Materials Science and Engineering: A 698 , pp. 162-173. 10.1016/j.msea.2017.05.061

Setchi, Rossitza

and Asikhia, Obokhai K. 2017. Exploring user experience with image schemas, sentiments, and semantics. IEEE Transactions on Affective Computing 10 (2) , pp. 185-195. 10.1109/TAFFC.2017.2705691

Strisland, F., Vedum, J., Liverud, A., Dalgard, S., Brødreskift, T., Albert, B., Noyvirt, A., Setchi, Rossitza

, Vene, K., Herranen, H., Kirs, M., Antal, A, Schellhorn, K. and Sjaaheim, H. 2017. Portable qEEG and HD-tCS device for point-of-injury Traumatic Brain Injury diagnostics. Presented at: 14th International Conference on Wearable Micro and Nano Technologies for Personalized Health (pHealth), Eindhoven, The Netherlands, 14-16 May 2017. Published in: Blobel, B. and Goossen, W. eds. pHealth 2017. Studies in Health Technology and Informatics , vol.237 Amsterdam: IOS Press, pp. 198-203. 10.3233/978-1-61499-761-0-198

Alghamdi, Awn, Prickett, Paul

2017. A conceptual framework to support decision-making in remanufacturing engineering processes. Campana, G., Howlett, R., Setchi, R. and Cimatti, B., eds. Sustainable Design and Manufacturing 2017, Vol. 68. Smart Innovation, Systems and Technologies, Springer International Publishing, pp. 222-232. (10.1007/978-3-319-57078-5_22)

Eyers, Daniel

2017. Supply chain risk management for sustainable additive manufacturing. Presented at: Sustainable Design and Manufacturing 2017, Bologna, Italy, 24 - 27 April 2017. Published in: Campana, G., Howlett, R. J., Setchi, Rossitza

and Cimatti, B. eds. Sustainable Design and Manufacturing 2017. Smart Innovation, Systems and Technologies , vol.68 Cham: Springer, pp. 280-288. 10.1007/978-3-319-57078-5_28

O'Regan, Paul, Prickett, Paul

, Hankins, Gareth and Jones, Nick 2017. Engineering a more sustainable manufacturing process for metal Additive Layer Manufacturing using a productive process pyramid. Presented at: Sustainable Design and Manufacturing (SDM-17), Bologna, Italy, 26-29 April 2017. Published in: Campana, G., Howlett, R. J., Setchi, Rossitza

and Cimatti, B. eds. Sustainable Design and Manufacturing (SDM-17). , vol.68 Cham: Springer, pp. 736-745. 10.1007/978-3-319-57078-5_69

Han, Quanquan, Setchi, Rossitza

and Evans, Samuel Lewin

2017. Characterisation and milling time optimisation of nanocrystalline aluminium powder for selective laser melting. International Journal of Advanced Manufacturing Technology 88 (5) , pp. 1429-1438. 10.1007/s00170-016-8866-z

Campana, Giampaolo, Setchi, Rossitza

, Howlett, Robert J. and Cimatti, Barbara, eds. 2017. Sustainable design and manufacturing 2017: Selected papers on sustainable design and manufacturing. Springer. 10.1007/978-3-319-57078-5

Al-Saadi, Ahmed, Setchi, Rossitza M.

and Allen, Stuart Michael

2016. Routing protocol for heterogeneous wireless mesh networks. IEEE Transactions on Vehicular Technology 65 (12) , pp. 9773-9786. 10.1109/TVT.2016.2518931

Setchi, Rossitza

2016. Multi-faceted Assessment of Trademark Similarity. Expert Systems with Applications 65 , pp. 16-27. 10.1016/j.eswa.2016.08.028

Asikhia, O.K. and Setchi, Rossitza

2016. Linking design intention and users' interpretation through image schemas. IFAC-PapersOnLine 49 (19) , pp. 283-288. 10.1016/j.ifacol.2016.10.550

de La Bourdonnaye, François, Setchi, Rossitza

and Zanni-Merk, Cecilia 2016. Gaze trajectory prediction in the context of social robotics. IFAC-PapersOnLine 49 (19) , pp. 126-131. 10.1016/j.ifacol.2016.10.473

Albert, Bruno, Noyvirt, Alexandre, Setchi, Rossitza

, Sjaaheim, Haldor, Velikova, Svetla and Strisland, Frode 2016. Portable decision support for diagnosis of traumatic brain injury. Procedia Computer Science 96 , pp. 692-702. 10.1016/j.procs.2016.08.252

Albert, Bruno, Zhang, Jingjing, Noyvirt, Alexandre, Setchi, Rossitza

, Sjaaheim, Haldor, Velikova, Svetla and Strisland, Frode 2016. Automatic EEG processing for the early diagnosis of traumatic brain injury. Procedia Computer Science 96 , pp. 703-712. 10.1016/j.procs.2016.08.253

Shigemori, Tomoaki, Kawanaka, Hiroharu, Hicks, Yulia

, Takase, Haruhiko and Tsuruoka, Shinji 2016. Dementia detection using weighted direction index histograms and SVM for clock drawing test. Procedia Computer Science 96 , pp. 1240-1248. 10.1016/j.procs.2016.08.168

O'Regan, Paul, Prickett, Paul

, Hankins, Gareth and Jones, Nick 2016. Metal based additive layer manufacturing: variations, correlations and process control. Presented at: KES-2016, York, 5 - 7 September 2016. Procedia Computer Science. Elsevier, 10.1016/j.procs.2016.08.134

Han, Quanquan, Setchi, Rossitza

and Evans, Samuel Lewin

2016. Synthesis and characterisation of advanced ball-milled Al-Al2O3 nanocomposites for selective laser melting. Powder Technology 297 , pp. 183-192. 10.1016/j.powtec.2016.04.015

Dixon, Adam, Liu, Ying

2016. Computer-aided ethnography in engineering design. Presented at: 28th International Conference on Design Theory and Methodology, Charlotte, North Carolina, USA, 21-24 August 2016. ASME 2016 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference: Volume 7: 28th International Conference on Design Theory and Methodology Charlotte, North Carolina, USA, August 21–24, 2016. ASME Proceedings , vol.7 New York, NY: ASME, V007T06A007. 10.1115/DETC2016-59832

Han, Quanquan, Setchi, Rossitza

, Evans, Samuel Lewin

and Qiu, Chunlei

2016. Three-dimensional finite element thermal analysis in selective laser melting of Al-Al2O3 powder. Presented at: The 27th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, Austin, Texas, USA, 8-10 August 2016.

Siltanen, P., Tenhunen, J., Setchi, Rossitza

and Diaz, L. 2016. Modern technical documents for global users - usability vs. efficient production. Presented at: Technology Management Conference, Technology Management Conference, 22-24 June 2009. 2009 IEEE International Technology Management Conference (ICE). Leiden: IEEE, 10.1109/ITMC.2009.7461441

Marsh, Jacqueline and Eyers, Daniel

2016. Increasing production efficiency through electronic batch record systems: a case study. Presented at: SDM 2016, Chania, Crete Greece, 4 - 6 April 2016. Published in: Setchi, Rossitza

, Howlett, Robert J., Liu, Ying

eds. Sustainable Design and Manufacturing 2016. Smart Innovation, Systems and Technologies (52) Cham: pp. 261-269. 10.1007/978-3-319-32098-4_23

Romli, Awanis, Prickett, Paul

and Soe, Shwe 2016. An integrated eco-design decision making tool. Presented at: SDM 2016, Crete, Greece, 4-6 April 2016. Published in: Setchi, R., Howlett, R., Liu, Y. and Theobald, P. eds. Sustainable Design and Manufacturing 2016. Smart Innovation, Systems and Technologies , vol.52 Cham: Springer, 10.1007/978-3-319-32098-4_46

Morris, Ashley

and Prickett, Paul William

2016. Product change management and future information architectures. Presented at: Sustainable Design and Manufacturing 2016, Chania, Crete, Greece, 5 - 8 April 2016.. Published in: Setchi, Rossitza

, Howlett, Robert J., Liu, Ying

eds. Sustainable Design and Manufacturing 2016. Smart Innovation, Systems and Technologies , vol.1 (52) Switzerland: Springer International Publishing, pp. 241-250. 10.1007/978-3-319-32098-4_21

Davies, Alan, Packianather, Michael

, White, John and Soman, Sajith 2016. Achieving sustainability in SME manufacturing operations via the use of flexible integrated technology and product symbiosis. Presented at: SDM 2016, Crete, Greece, 4-6 April 2016. Published in: Setchi, Rossitza

, Howlett, Robert J., Liu, Ying

eds. Sustainable Design and Manufacturing 2016. Sustainable Design and Manufacturing 2016. Smart Innovation, Systems and Technologies , vol.52 Cham: Springer, pp. 281-293. 10.1007/978-3-319-32098-4_25

Dorrington, Peter, Lacan, Franck Andre

and Bigot, Samuel

2016. How are micro enterprises adopting emergent technologies? Presented at: 3rd International Conference on Sustainable Design and Manufacturing (SDM-2016), Chania, Greece, 4-6 April 2016. Published in: Setchi, Rossitza

, Howlett, Robert J., Liu, Ying

eds. Sustainable Design and Manufacturing 2016. Sustainable Design and Manufacturing 2016. Smart Innovation, Systems and Technologies (SIST) , vol.52 (52) Cham: Springer, pp. 215-226. 10.1007/978-3-319-32098-4_19

Anuar, Fatahiyah Mohd, Setchi, Rossitza

and Lai, Yu-Kun

2016. Semantic retrieval of trademarks based on conceptual similarity. IEEE Transactions on Systems Man and Cybernetics: Systems 46 (2) , pp. 220-233. 10.1109/TSMC.2015.2421878

Al-Moadhen, Ahmed Abdulhadi, Packianather, Michael

and Qiu, Renxi 2016. Robot task planning in deterministic and probabilistic conditions using semantic knowledge base. International Journal of Knowledge and Systems Science 7 (1) , pp. 56-77. 10.4018/IJKSS.2016010104

Morris, Ashley, Halpern, Marc, Setchi, Rossitza

and Prickett, Paul William

2016. Assessing the challenges of managing product design change through-life. Journal of Engineering Design 27 (1 - 3) , pp. 25-49. 10.1080/09544828.2015.1085498

Harbi, Zainab, Hicks, Yulia Alexandrovna

and Setchi, Rossitza M.

2016. Clock drawing test digit recognition using static and dynamic features. Procedia Computer Science 96 , pp. 1221-1230. 10.1016/j.procs.2016.08.166

Feng, Qixiang, Tang, Qian, Soe, Shwe, Liu, Ying

2016. An Investigation into the quasi-static response of Ti6Al4V lattice structures manufactured using selective laser melting. Setchi, Rossitza, Howlett, Robert J., Liu, Ying and Theobald, Peter, eds. Sustainable Design and Manufacturing 2016, Vol. 52. Smart Innovation, Systems and Technologies, Springer, pp. 399-409. (10.1007/978-3-319-32098-4_34)

Setchi, Rossitza

, Howlett, Robert J., Liu, Ying

, eds. 2016. Sustainable design and manufacturing 2016. Smart Innovation, Systems and Technologies, Springer. 10.1007/978-3-319-32098-4

Bennasar, Mohamed, Hicks, Yulia

2015. Feature selection using Joint Mutual Information Maximisation. Expert Systems with Applications 42 (22) , pp. 8520-8532. 10.1016/j.eswa.2015.07.007

Mohammad, Mahmud Abdalla, Kaloskampis, Ioannis

2015. Ontology-based framework for risk assessment in road scenes using videos. Presented at: 19th Annual Conference on Knowledge-Based and Intelligent Information & Engineering Systems (KES-2015), Singapore, 7-9 September 2015. Procedia Computer Science. Procedia Computer Science. , vol.60 Elsevier, pp. 1532-1541. 10.1016/j.procs.2015.08.300

Shigemori, Tomoaki, Harbi, Zainab, Kawanaka, Hiroharu, Hicks, Yulia Alexandrovna

, Takase, Haruhiko and Tsuruoka, Shinji 2015. Feature extraction method for clock drawing test. Procedia Computer Science 60 , pp. 1707-1714. 10.1016/j.procs.2015.08.280

Harbi, Zainab, Hicks, Yulia Alexandrovna

and Bayer, Antony James

2015. Segmentation of clock drawings based on spatial and temporal features. Procedia Computer Science 60 , pp. 1640-1648. 10.1016/j.procs.2015.08.274

Al-Saadi, Ahmed, Setchi, Rossitza

2015. Cognitive network framework for heterogeneous wireless networks. Procedia Computer Science 60 , pp. 216-225. 10.1016/j.procs.2015.08.121

Asikhia, Obokhai Kess, Setchi, Rossitza

and Walters, Andrew 2015. Conceptual framework for evaluating intuitive interaction based on image schemas. Interacting with Computers 27 (3) , pp. 287-310. 10.1093/iwc/iwu050

O'Leary, Richard, Setchi, Rossitza

and Prickett, Paul William

2015. An investigation into the recycling of Ti-6Al-4V powder used within SLM to improve sustainability. Presented at: SDM'2015: 2nd International Conference on Sustainable Design and Manufacturing, Seville, Spain, 12-14 April 2015.

Prickett, Paul William

, Morris, Ashley

2015. Product change management: the through-life impact of diverging designs within product fleets. Presented at: SDM'2015: 2nd International Conference on Sustainable Design and Manufacturing, Seville, Spain, 12-14 April 2015.

Romli, Awanis, Setchi, Rossitza

, Soe, Shwe and Prickett, Paul

2015. Eco-case based reasoning (Eco-CBR) for supporting sustainable product design. Presented at: SDM'2015: 2nd International Conference on Sustainable Design and Manufacturing, Seville, Spain, 12-14 April 2015.

Romli, Awanis, Prickett, Paul

and Soe, Shwe 2015. Integrated eco-design decision-making for sustainable product development. International Journal of Production Research 53 (2) , pp. 549-571. 10.1080/00207543.2014.958593

Setchi, Rossitza

, Liu, Ying

and Li, Weidong 2015. Editorial for the special issue of decision support for sustainable design and manufacturing. Journal of Industrial and Production Engineering 32 (1) , pp. 1-2. 10.1080/21681015.2014.1000404

Han, Quanquan, Setchi, Rossitza

and Karihaloo, Bhushan

2015. Challenges and opportunities in the additive layer manufacturing of Al-Al2O3 nanocomposites. Presented at: SDM'2015 International Conference on Sustainable Design and Manufacturing, Seville, Spain, 12-14 April 2015. Published in: Setchi, Rossitza

, Howlett, R. J. and Salinas, I. E. eds. KES Transactions on Sustainable Design and Manufacturing (SDM-15 Conference Proceeding)s. , vol.2 (1) England, UK: Future Technology Press, pp. 389-399.

Al-Moadhen, Ahmed, Packianather, Michael

, Qiu, Renxi, Setchi, Rossitza

and Ji, Ze

2015. Improving the efficiency of robot task planning by automatically integrating its planner and common-sense knowledge base. Tweedale, Jeffrey W., Jain, Lakhmi C. and Watada, Junzo, eds. Knowledge-Based Information Systems in Practice, Vol. 30. Springer, pp. 185-198. (10.1007/978-3-319-13545-8_11)

Setchi, Rossitza

2014. Multi-rate medium access protocol based on enforcement learning. Presented at: IEEE international Conference on Systems, Man and Cybernetics, San Diego, CA, USA, 5-8 October 2014.

Noyvirt, Alexandre, Setchi, Rossitza

and Albert, Bruno 2014. GLAICP: a global-local optimization algorithm for robust human pose tracking from depth data. Presented at: IEEE International Conference on Systems, Man, and Cybernetics (SMC), San Diego, CA, 5-8 October 2014. 2014 IEEE International Conference on Systems, Man, and Cybernetics (SMC). 2014 IEEE INTERNATIONAL CONFERENCE ON SYSTEMS, MAN AND CYBERNETICS (SMC). Hoboken, NJ: IEEE, pp. 2541-2546. 10.1109/SMC.2014.6974309

Todorov, Diman and Setchi, Rossitza

2014. Time-efficient estimation of conditional mutual information for variable selection in classification. Computational Statistics and Data Analysis 72 , pp. 105-127. 10.1016/j.csda.2013.10.026

Morris, Ashley

, Halpern, Marc, Prickett, Paul William

and Setchi, Rossitza M.

2014. Product change management: assessing the challenges to maintaining design integrity throughout the product lifecycle. Presented at: SDM'14: International Conference on Sustainable Design and Manufacturing, Cardiff, Wales, UK, 28-30 April 2014. Published in: Setchi, Rossitza M.

, Howlett, R. J., Naim, Mohamed Mohamed

and Seinz, H. eds. KES Transactions on Sustainable Design and Manufacturing. , vol.1 Hove, East Sussex: Future Technology Press, pp. 188-200.

Setchi, Rossitza

, Noyvirt, Alexandre and Albert, Bruno 2014. A global-local optimisation algorithm for robust human pose tracking from depth data. Presented at: 2014 IEEE International Conference on Systems, Man and Cybernetics (SMC), San Diego, CA, 5-8 October 2015. Proceedings of the 2014 IEEE International Conference on Systems, Man, and Cybernetics; SMC. IEEE, pp. 2571-2576.

Bennasar, Mohamed, Setchi, Rossitza

, Hicks, Yulia

and Bayer, Antony James

2014. Cascade classification for diagnosing dementia. Presented at: 2014 IEEE International Conference on Systems, Man and Cybernetics (SMC), San Diego, CA, USA, 5-8 October 2014. 2014 IEEE International Conference on Systems, Man and Cybernetics (SMC). pp. 2535-2540. 10.1109/SMC.2014.6974308

Setchi, Rossitza

, Noyvirt, Alexandre and Albert, Bruno 2014. A portable medical system for the early diagnosis and treatment of traumatic brain injury. Presented at: 2014 IEEE International Conference on Systems, Man and Cybernetics (SMC), San Diego, CA, 5-8 October 2014. 2014 IEEE International Conference on Systems, Man and Cybernetics (SMC). IEEE, pp. 2529-2534. 10.1109/SMC.2014.6974307

Mohd Anuar, Fatahiyah, Setchi, Rossitza

and Lai, Yukun

2014. Trademark retrieval based on phonetic similarity. Presented at: 2014 IEEE International Conference on Systems, Man and Cybernetics (SMC), San Diego, CA, 5-8 October, 2015. 2014 IEEE International Conference on Systems, Man and Cybernetics (SMC). IEEE, pp. 1642-1647. 10.1109/SMC.2014.6974151

Romli, Awanis, Prickett, Paul William

and Soe, Shwe 2014. Sensitivity analysis of an eco-design house of quality model. Presented at: SDM'14: International Conference on Sustainable Design and Manufacturing, Cardiff, Wales, UK, 28-30 April 2014. pp. 488-499.

Asikhia, Obokhai Kess, Setchi, Rossitza

and Walters, Andrew 2014. Exploring sustainable design using image schemas. Presented at: International Conference on Sustainable Design and Manufacturing SDM'14,, Cardiff, UK, 28-30 April 2014. Sustainable Design and Manufacturing Conference (SDM-14). pp. 67-78.

Setchi, Rossitza M.

, Howlett, R. J., Naim, Mohamed Mohamed

and Seinz, H. 2014. KES transactions on sustainable design and manufacturing. vol. 1. London: Future Technology Press.

Peng, Sun, Hicks, Yulia

2014. Joint EEG-fMRI model for EEG source separation. Presented at: 2014 IEEE International Conference on Systems, Man and Cybernetics (SMC), San Diego, CA, 5-8 October 2014. 2014 IEEE International Conference on Systems, Man and Cybernetics (SMC). IEEE, pp. 2234-2239. 10.1109/SMC.2014.6974257

Al-Saadi, Ahmed, Setchi, Rossitza

and Allen, Stuart Michael

2014. Multi-rate medium access protocol based on reinforcement learning. Presented at: 2014 IEEE International Conference on Systems, Man and Cybernetics (SMC), San Diego, CA, 5-8 October 2014. Systems, Man and Cybernetics (SMC), 2014 IEEE International Conference on. IEEE, pp. 2875-2880. 10.1109/SMC.2014.6974366

Bennasar, Mohamed, Setchi, Rossitza

, Bayer, Antony James

2013. Feature selection based on information theory in the clock drawing test. Presented at: 17th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems, Kitakyushu, Japan, 9 -12 September 2013. Procedia Computer Science. , vol.22 pp. 902-911. 10.1016/j.procs.2013.09.173

Al-Moadhen, Ahmed, Qiu, Renxi, Packianather, Michael, Ji, Ze

2013. Integrating robot task planner with common-sense knowledge base to improve the efficiency of planning. Procedia Computer Science 22 , pp. 211-220. 10.1016/j.procs.2013.09.097

Bennasar, Mohamed, Setchi, Rossitza

2013. Feature interaction maximisation. Pattern Recognition Letters 34 (14) , pp. 1630-1635. 10.1016/j.patrec.2013.04.002

Todorov, Diman, Setchi, Rossitza

and Bayer, Antony James

2013. Linguistic markers in the sentence writing question of the mini-mental state examination for discrimination between Alzheimer's and Vascular Dementia. Presented at: 17th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems, Kitakyushu, Japan, 9 -12 September 2013. 17th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems: General Track Proceedings. pp. 114-123.

Al-Moadhen, Ahmed, Qiu, Renxi, Packianather, P., Ji, Z. and Setchi, Rossitza

2013. Integrating robot task planner with common-sense knowledge base to improve the efficiency of planning. Presented at: 17th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems, Kitakyushu, Japan, 9 -12 September 2013. 17th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems: General Track Proceedings. pp. 94-103.

Mohd Anuar, Fatahiyah, Setchi, Rossitza

and Lai, Yukun

2013. A conceptual model of a trademark retrieval system based on conceptual similarities. Presented at: 17th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems, Kitakyushu, Japan, 9 -12 September 2013. 17th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems: Invited Session Proceedings. pp. 300-309.

Romli, Awanis, Prickett, Paul William

and Soe, Shwe 2013. A Conceptual Model for Sustainable Product Design. Presented at: 5th International Conference on Advanced Design and Manufacture (ADM2013), Valencia, Spain, 25-28 September 2013.

Romli, Awanis, Prickett, Paul William

and Soe, Shwe 2013. A conceptual model for sustainable product design. Key Engineering Materials 572 , pp. 3-6. 10.4028/www.scientific.net/KEM.572.3

Shi, Lei and Setchi, Rossitza

2013. Ontology-based personalised retrieval in support of reminiscence. Knowledge-Based Systems 45 , pp. 47-61. 10.1016/j.knosys.2013.02.004

Wang, Zhichun, Li, Juanzi, Zhao, Yue, Setchi, Rossitza

and Tang, Jie 2013. A unified approach to matching semantic data on the Web. Knowledge-Based Systems 39 , pp. 173-184. 10.1016/j.knosys.2012.10.015

Mohd Anuar, Fatahiyah, Setchi, Rossitza

and Lai, Yukun

2013. Trademark image retrieval using an integrated shape descriptor. Expert Systems with Applications 40 (1) , pp. 105-121. 10.1016/j.eswa.2012.07.031

Stankov, Ivan Dimitrov, Todorov, Diman and Setchi, Rossitza

2013. Semantically enhanced text stemmer (SETS) for cross-domain document clustering. Presented at: KES 2012: 16th International Conferenc eon Knowledge-Based and Intelligent Information and Engineering Systems, San Sebastian, Spain, 10-12 September 2012. Published in: Grana, M., Toro, C., Howlett, R. J. and Jain, L. C. eds. Knowledge Engineering, Machine Learning and Lattice Computing with Applications: 16th International Conference, KES 2012, San Sebastian, Spain, September 10-12, 2012, Revised Selected Papers. Lecture Notes in Computer Science. Lecture Notes in Computer Science , vol.7828 Berlin and Heidelberg: Springer, 108 -118. 10.1007/978-3-642-37343-5_12

Brownsword, M. and Setchi, Rossitza

2013. Formalised approach to the management of risk: Process formalisation. Yang, Guangfei, ed. Multidisciplinary Studies in Knowledge and Systems Science, IGI Global, 214 -232.

Soe, Shwe, Eyers, Daniel Roy

, Packianather, Michael Sylvester

2013. Assessment of non-uniform shrinkage in the laser sintering of polymer materials. International Journal of Advanced Manufacturing Technology 68 (1-4) , pp. 111-125. 10.1007/s00170-012-4712-0

Britton, Andrew, Setchi, Rossitza

and Marsh, A. 2013. Intuitive interaction with multifunctional mobile interfaces. Journal of King Saud University - Computer and Information Sciences 25 (2) , pp. 187-196. 10.1016/j.jksuci.2012.11.002

Shi, Lei and Setchi, Rossitza

2013. Enhanced Semantic Representation for Improved Ontology-based Information Retrieval. International Journal of Knowledge-based and Intelligent Engineering Systems 17 (2) , pp. 127-136. 10.3233/KES-130258

Stankov, Ivan Dimitrov, Todorov, Diman and Setchi, Rossitza

2013. Enhanced Cross-Domain Document Clustering with a Semantically Enhanced Text Stemmer (SETS). International Journal of Knowledge-based and Intelligent Engineering Systems 17 (2) , pp. 113-126. 10.3233/KES-130267

Syed Abdullah, Engku and Setchi, Rossitza

2012. Concept-based indexing of annotated images using semantic DNA. Engineering Applications of Artificial Intelligence 25 (8) , pp. 1644-1655. 10.1016/j.engappai.2012.02.005

Shi, Lei and Setchi, Rossitza

2012. User-oriented ontology-based clustering of stored memories. Expert Systems with Applications 39 (10) , pp. 9730-9742. 10.1016/j.eswa.2012.02.087

Liu, Ying

, Setchi, Rossitza M.

, Tseng, Vincent S. and Wang, Feng Chun 2012. Editorial for the special issue of service computing and service oriented enterprise systems in design, manufacturing and supply chain. Journal of Intelligent Manufacturing 23 (4) , pp. 1327-1329. 10.1007/s10845-012-0638-5

Ji, Ze

, Qiu, Renxi, Noyvirt, Alexandre Emilov, Soroka, Anthony John

, Li, D. and Xu, S. 2012. Towards automated task planning for service robots using semantic knowledge representation. Presented at: 2012 10th IEEE International Conference on Industrial Informatics (INDIN), Beijing, China, 25-27 July 2012. INDIN2012: IEEE 10th International Conference on Industrial Informatics. Los Alamitos, CA: IEEE, pp. 1194-1201. 10.1109/INDIN.2012.6301131

Su, Shizhong, Li, M. Z., Liu, C. G., Ji, Chunqian, Setchi, Rossitza

, Larkiola, J., Panteleev, I., Stead, I. and Lopez, R. 2012. Flexible tooling system using reconfigurable multi-point thermoforming technology for manufacturing freeform panels. Key Engineering Materials 504-06 , pp. 839-844. 10.4028/www.scientific.net/KEM.504-506.839

Qiu, Renxi, Ji, Ze

, Noyvirt, Alexandre, Soroka, Anthony John

, Pham, Duc Truong, Xu, S., Shivarov, N., Pigini, L., Arbeiter, G., Weisshardt, F., Graf, B., Mast, M., Blasi, L., Facal, D., Rooker, M., Lopez, R., Li, D., Liu, B., Kronreif, G. and Smrz, P. 2012. Towards robust personal assistant robots: Experience gained in the SRS project. Presented at: 2012 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS), Vilamoura, Portugal, 7-12 October 2012. Intelligent Robots and Systems (IROS), 2012 IEEE/RSJ International Conference on. IEEE, pp. 1651-1657. 10.1109/IROS.2012.6385727

Bennasar, Mohamed, Setchi, Rossitza

2012. Unsupervised discretization method based on adjustable intervals. Presented at: KES 2012 - 16th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems, San Sebastian, Spain, 10-12 September 2012. Published in: Graña, M., Toro, C., Posada, J., Howlett, R. J. and Jain, L. C. eds. Advances in knowledge-based and intelligent information and engineering systems. Frontiers in Artificial Intelligence and Applications (243) Amsterdam: IOS Press, pp. 79-87. 10.3233/978-1-61499-105-2-79

Setchi, Rossitza

, Tang, Qiao and Stankov, Ivan Dimitrov 2011. Semantic-based information retrieval in support of concept design. Advanced Engineering Informatics 25 (2) , pp. 131-146. 10.1016/j.aei.2010.07.006

Brownsword, Mike and Setchi, Rossitza

2011. A Formalised Approach to the Management of Risk: Process Formalisation. International Journal of Knowledge and Systems Science 2 (3) , pp. 63-80. 10.4018/jkss.2011070105

Fadzli, S. A. and Setchi, Rossitza

2011. Ontology-based indexing of annotated images using semantic DNA and vector space model. Presented at: 2011 International Conference on Semantic Technology and Information Retrieval (STAIR'11), Putrajaya, Malaysia, 28-28 June 2011. Published in: Noah, S. A. M., Omar, N., Crestani, F., Mohd, M., Aziz, M. J. A. and Puade, O. A. eds. 2011 International Conference on Semantic Technology and Information Retrieval. IEEE, pp. 40-47. 10.1109/STAIR.2011.5995762

Setchi, Rossitza

and Bouchard, C. 2010. In search of design inspiration: a semantic-based approach. Journal of Computing and Information Science in Engineering 10 (3) , 031006. 10.1115/1.3482061

Cannella, S., Ciancimino, E., Canca Ortiz, D. and Setchi, Rossitza

2010. Production inventory and enterprise system implementation: an ex-ante no-cost based evaluation. Lecture Notes in Business Information Processing 47 (Part 8) , pp. 291-303. 10.1007/978-3-642-12814-1_25

Fadzli, Syed Abdullah and Setchi, Rossitza

2010. Semantic approach to image retrieval using statistical models based on a lexical ontology. Lecture Notes in Computer Science 6279 , pp. 240-250.

Fadzli, Syed Abdullah and Setchi, Rossitza

2010. Semantic approach to image retrieval using statistical models based on a lexical ontology. Lecture Notes in Computer Science 6279 , pp. 240-250.

Fadzli, S. A. and Setchi, Rossitza

2010. A semantic approach to text-based image retrieval using a lexical ontology. Presented at: International conference on Kansei Engineering and Emotion research (KEER2010), Paris, France,

Britton, A. and Setchi, Rossitza

2010. Intuitive interaction with multifunctional smartphone interfaces. Presented at: I*PROMS'10 Innovative Production Machines and Systems, Cardiff, UK,

Loukakos, Panagiotis and Setchi, Rossitza

2010. Application of ontology engineering in customs domain. Lecture Notes in Computer Science 6276 , pp. 481-490. 10.1007/978-3-642-15387-7_52

Shi, Lei and Setchi, Rossitza

2010. An ontology based approach to measuring the semantic similarity between information objects in personal information collections. Presented at: KES 2010: Knowledge-Based and Intelligent Information and Engineering Systems, Cardiff, UK, 8-10 September 2010. Published in: Setchi, Rossitza M.

and Jordanov, Ivan eds. Knowledge-Based and Intelligent Information and Engineering Systems:14th International Conference, KES 2010, Cardiff, UK, September 8-10, 2010, Proceedings, Part I. Lecture Notes in Computer Science. Lecture Notes in Computer Science, Vol. 6276 , vol.6276 Springer Verlag, pp. 617-626. 10.1007/978-3-642-15387-7_65

Yusof, Yuhanis and Rana, Omer Farood

2010. Classification of software srtifacts based on structural information. Lecture Notes in Computer Science 6279 , pp. 546-555. 10.1007/978-3-642-15384-6_58

Setchi, Rossitza

and Jordanov, J., eds. 2010. Knowledge-based and intelligent information and engineering systems. KES2010 Proceedings, Part I, Springer.

Setchi, Rossitza

and Jordanov, J., eds. 2010. Knowledge-based and intelligent information and engineering systems. KES2010 Proceedings, Part II, Springer.

Setchi, Rossitza

and Jordanov, J., eds. 2010. Knowledge-based and intelligent information and engineering systems. KES2010 Proceedings, Part III, Springer.

Setchi, Rossitza

and Jordanov, J., eds. 2010. Knowledge-based and intelligent information and engineering systems. KES2010 Proceedings, Part IV, Springer.

Pasantonopoulos, C., Dimov, Stefan Simeonov, Pham, Duc Truong and Setchi, Rossitza

2009. An object-orientated framework for virtual intelligent product manuals. International Journal of Systems Science 40 (2) , pp. 187-204. 10.1080/00207720802630727

Setchi, Rossitza

, Tang, Q. and Bouchard, C. 2009. Ontology-based concept indexing of images. Presented at: KES 2009: 13th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems, Santiago, Chile, 28-30 September 2009. Published in: Velasquez, J. D. ed. Knowledge-Based and Intelligent Information and Engineering Systems: 13th International Conference, KES 2009, Santiago, Chile, September 28-30, 2009, Proceedings, Part I. Lecture Notes in Computer Science , vol.5711 Berlin: Springer Verlag, pp. 293-300. 10.1007/978-3-642-04595-0_36

Edwards, A., Fadzli, S. A. and Setchi, Rossitza

2009. A comparative study of developing physical and digital mood boards. Presented at: 5th International Conference on Innovative Production Machines and Systems (I*PROMS'09), Cardiff, UK,

Haliday, D. and Setchi, Rossitza

2009. A comparative study of using traditional user-centred and Kansei Engineering approaches to extract users requirements. Presented at: Innovative Production Machines and Systems Conference (I*PROMS'09), Cardiff, UK,

Siltanen, P., Tenhunen, J., Setchi, Rossitza M.

and Diaz, L. 2009. Modern technical documents for global users - usability vs efficient production. Presented at: 15th International Conference on Concurrent Enterprising, Leiden, The Netherlands,

Setchi, Rossitza

2009. Intelligent product manuals. Saarbrucken: VDM Verlag.

Setchi, Rossitza

and Lagos, Nikolaos 2008. Adaptive, responsive and reconfigurable product support for future manufacturing. International Journal of Innovative Computing, Information and Control 4 (3) , pp. 615-625.

Pham, Dinh, Eldukhri, Eldaw Elzaki, Soroka, Anthony John

, Zlatanov, V., Packianather, Michael Sylvester

, Setchi, Rossitza M.

, Pham, P. T. N., Thomas, A. and Dadam, Yehya 2008. The innovative production machines and systems network of excellence. Putnik, G. D. and Cunha, M .M., eds. Encyclopedia of Networked and Virtual Organisations, Information Science Reference, pp. 725-728.

Brousseau, Emmanuel Bruno Jean Paul

, Dimov, Stefan Simeonov and Setchi, Rossitza

2008. Knowledge acquisition techniques for feature recognition in CAD models. Journal of Intelligent Manufacturing 19 (1) , pp. 21-32. 10.1007/s10845-007-0043-7

Marsh, A. and Setchi, Rossitza

2008. Design for intuitive use: a study of mobile phones. Presented at: Proceedings of the 4th I*PROMS Virtual International Conference, Cardiff, UK,

Setchi, Rossitza

2008. Pedagogical and socio-cultural approaches to vocational e-learning in ASMAS. Presented at: 6th International Conference 21st Century Challenges in Higher Education and Research (CHER21 '08), Sozopol, Bulgaria,

Setchi, Rossitza M.

and Lagos, N. 2008. Reasoning in product and performance support. Presented at: 6th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME '08), Naples, Italy,

Lagos, N. and Setchi, Rossitza

2008. PROGNOSIS: an adaptive system for virtual technical documentation. Pazos-Arias, J., Kloos, C. D. and Nores, M. L., eds. Personalisation of interactive multimedia services: a research and development perspective, New York: Nova Science Publishers, pp. 141-156.

Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul

, Packianather, Michael Sylvester

2007. A hybrid method for feature recognition in CAD models. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture , pp. 79-96.

Rodriquez-Repiso, L., Setchi, Rossitza

and Salmeron, J. L. 2007. Modelling IT projects success. Technovation 27 (10) , pp. 582-594. 10.1016/j.technovation.2006.12.006

Rodriquez-Repiso, L., Setchi, Rossitza

and Salmeron, J. L. 2007. Modelling IT projects success with fuzzy cognitive maps. Expert Systems with Applications 32 (2) , pp. 543-559. 10.1016/j.eswa.2006.01.032

Setchi, Rossitza

and Lagos, N. 2007. Multimodal reasoning in a knowledge framework for product support. World Academy of Science, Engineering and Technology 19 , pp. 147-153.

Setchi, Rossitza

and Tang, Q. 2007. Concept indexing using ontology and supervised machine learning. World Academy of Science, Engineering and Technology 25 , pp. 221-226.

Setchi, Rossitza

and Lagos, N. 2007. Knowledge in product and performance support. Zhang, Z. and Siekmann, J., eds. Knowledge Science, Engineering and Management, Lecture Notes in Computer Science, vol. 4798. Berlin: Springer, pp. 460-471. (10.1007/978-3-540-76719-0_45)

Setchi, Rossitza

, Lagos, N. and Froud, D. 2007. Computational imagination: research agenda. Orgun, M. A. and Thornton, J., eds. Advances in Artificial Intelligence, Lecture Notes in Computer Science, vol. 4830. Berlin: Springer, pp. 387-393. (10.1007/978-3-540-76928-6_40)

Setchi, Rossitza

, Lagos, N. and Huneiti, A. 2007. Semantic modelling of product manuals. Apolloni, B., ed. Knowledge-Based and Intelligent Information and Engineering Systems, Lecture Notes in Computer Science, vol. 4693. Berlin: Springer, pp. 1162-1169. (10.1007/978-3-540-74827-4_145)

Eales, R., Setchi, Rossitza

and Bouchard, C. 2007. Semantic-based approach to developing concepts in the automotive industry. Presented at: 3rd I*PROMS Virtual Conference, Cardiff, UK, 2-13 July 2007. Published in: Pham, D. T., Eldukhri, E. E. and Soroka, A. J. eds. Innovative production machines and systems:Third I*PROMS Virtual Conference, 2nd-13th July 2007. Dunbeath: Whittles Publishing, pp. 605-610.

Mellin, R. and Setchi, Rossitza

2007. Mass customisation in the automotive industry. Presented at: 5th International Conference 21st Century Challenges in Higher Education and Research, Sozopol, Bulgaria, pp. 240-244.

Bouchard, C., Mantelet, F., Ziakovic, D., Setchi, Rossitza

, Tang, Q. and Aoussat, A. 2007. Building a design ontology based on the conjoint trends analysis. Presented at: I*PROMS*07 Innovative Production Machines and Systems, Cardiff, UK, pp. 593-598.

Bouchard, C., Mougenot, F., Omhover, J. F., Setchi, Rossitza

and Aoussat, A. 2007. Building a domain ontology for designers: Towards a Kansei-based ontology. Presented at: I*PROMS*07 Innovative Production Machines and Systems, Cardiff, UK, pp. 587-592.

Lagos, N. and Setchi, Rossitza

2007. A manufacturing ontology for e-learning. Presented at: I*PROMS*07 Innovative Production Machines and Systems, Cardiff, UK, 2-13 July 2007. Proceedings of the I*PROMS*07, 2-13 July 2007, Cardiff, UK. Whittles, pp. 552-557.

Setchi, Rossitza M.

2007. Personalisation in professional e-learning and performance support. Presented at: 5th International Conference 21st Century Challenges in Higher Education and Research, Sozopol, Bulgaria,

Setchi, Rossitza M.

and Lagos, N. 2007. Knowledge in product and performance support. Presented at: 2nd International Conference on Knowledge Science, Engineering and Management (KSEM '2007), Melbourne, Australia, pp. 460-471.

Setchi, Rossitza M.

and Lagos, N. 2007. Multimodal reasoning in a knowledge framework for product support. Presented at: 19th International Conference on Computer, Information and Systems Science and Engineering, Bangkok, Thailand, pp. 147-153.

Setchi, Rossitza M.

, Lagos, N. and Froud, D. 2007. Computational imagination: research agenda. Presented at: 20th Australian Joint Conference on Artificial Intelligence (AI '07), Gold Coast, Australia, pp. 387-393.

Setchi, Rossitza M.

, Lagos, N. and Huneiti, A. 2007. Semantic modelling of product manuals. Presented at: 11th International Conference on Knowledge-Based and Intelligent Information and Engineering Systems (KES 2007), Vietri sur Mare, Italy, pp. 1162-1169.

Setchi, Rossitza M.

and Tang, Q. 2007. Semantic-based representation of content using concept indexing. Presented at: Innovative Production Machines and Systems (*I'PROMS*07), Cardiff, UK, pp. 611-618.

Setchi, Rossitza M.

and Tang, Q. 2007. Concept indexing using ontology and supervised machine learning. Presented at: 19th International Conference on Computer, Information and Systems Science and Engineering, Bangkok, Thailand, pp. 221-226.

Setchi, Rossitza

, Dimov, S and Pham, D T 2006. A methodology for developing intelligent product manuals. Engineering Applications of Artificial Intelligence 19 (6) , pp. 657-669. 10.1016/j.engappai.2006.06.004

Pham, Duc Truong, Grabot, B., Eldukhri, Eldaw Elzaki, Soroka, Anthony John

, Zlatanov, Vladimir Ahguelov, Packianather, Michael Sylvester

, Setchi, Rossitza M.

, Pham, P. T. N., Thomas, A. and Dadam, Yehya 2006. Introduction to the special section on Innovative Production Machines and Systems (I*PROMS). Engineering Applications of Artificial Intelligence 19 (6) , pp. 579-581. 10.1016/j.engappai.2006.03.007

Setchi, Rossitza

and Lagos, N. 2006. Context modelling for product support systems. ACTA Mechanica Slovaca 2A , pp. 425-434.

Nathadwarawala, K. and Setchi, Rossitza

2006. Mass customisation: a study of a customised bicycle. Presented at: 4th international conference 21st Century Challenges in Higher Education and Research, Sozopol, Bulgaria, pp. 179-182.

Brousseau, Emmanuel Bruno Jean Paul

, Dimov, Stefan Simeonov and Setchi, Rossitza

2006. Learning and reasoning techniques for automatic feature recognition for CAD models. Presented at: I*PROMS'06 Innovative Production Machines and Systems, Cardiff, UK, pp. 77-82.

Lagos, N. and Setchi, Rossitza

2006. Product support knowledge. Presented at: I*PROMS'06 Innovative Production Machines and Systems, Cardiff, UK, 3-14 July 2006. Proceddings of the I*PROMS'06 , 3-14 July 2006, Cardiff, UK. Whittles, pp. 101-106.

Setchi, Rossitza M.

, Huneiti, A. and Pasantonopoulos, C. 2006. The evolution of intelligent product support. Presented at: 5th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (ICME), Iscia, Italy, pp. 639-646.

Setchi, Rossitza M.

and Lagos, N. 2006. Product support for reconfigurable manufacturing. Presented at: ASME International Symposium on Flexible Manufacturing, Osaka, Japan, , vol.106 (106/1-)

Setchi, Rossitza M.

and Lagos, N. 2006. Semantic-based authoring of technical documentation. Presented at: IEEE 20th World Automaton Congress, Budapest, Hungary, , vol.5 pp. 101-106.

Setchi, Rossitza M.

and Lagos, N. 2006. Context modelling for product support systems. Presented at: 8th International Conference on Automation and Robotics in Theory and Practice (ROBTEP), Jasna, Slovakia, pp. 425-434.

Sucre, F. and Setchi, Rossitza

2006. Identifying business opportunities in mass customisation. Presented at: 4th international conference 21st Century Challenges in Higher Education and Research, Sozopol, Bulgaria, pp. 179-182.

Pham, Duc Truong, Eldukhri, Eldaw Elzaki, Setchi, Rossitza M.

, Soroka, Anthony John

, Thomas, A., Dadam, Yehya and Dimov, Stefan Simeonov 2006. The Fp6 I*Proms network of excellence: Integrating European advanced manufacturing research. Presented at: 5th International Symposium on Intelligent and Manufacturing Systems (IMS 2006), Sakarya, Turkey, 29-31 May 2006.

Lagos, N., Setchi, Rossitza

and Dimov, Stefan Simeonov 2005. Towards the integration of performance support and e-learning: context-aware product support systems. Lecture Notes in Computer Science 3762 , pp. 1149-1158. 10.1007/11575863_138

Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul

2005. Automatic extraction of rules for feature recognition in solid models. Presented at: 1st I*PROMS: Intelligent Production Machines and Systems, Online, 4-15 July 2005. Published in: Pham, D. ed. Intelligent Production Machines And Systems - First I*proms Virtual Conference Proceedings. Elsevier, pp. 49-54.

Galan, R., Racero, J., Eguia, I. and Setchi, Rossitza

2005. Product grouping in reconfigurable manufacturing systems. Presented at: 15th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM05), Bilbao, Spain, 18-20 July 2005. Published in: Sullivan, W. G., Ahmad, M. M., Ashayeri, J. and Álvarez, E. eds. Flexible automation and intelligent manufacturing 2005 :15th International Conference on Flexible Automation and Intelligent Manufacturing (FAIM05) (Bilbao, Spain). University of Duesto Press, pp. 833-841.

Galan, R., Setchi, Rossitza

, Eguia, I., Racero, J. and Lagos, N 2005. Product families selection in reconfigurable manufacturing systems. Presented at: CIRP 3rd International Conference on Reconfigurable Manufacturing,

Pasantonopoulos, C., Dimov, Stefan Simeonov and Setchi, Rossitza

2005. An object-orientated framework for intelligent product manuals. Presented at: Innovative Production Machines and Systems Conference (IPROMS 2005), Cardiff, UK, pp. 85-90.

Pham, Duc Truong, Eldukhri, Eldaw Elzaki, Soroka, A., Zlatanov, V., Packianather, Michael Sylvester

, Pham, P. T. N., Thomas, A. and Dadam, Y. 2005. The EU FP6 I*PROMS network of excellence for innovative production machines and systems. Presented at: Innovative Production Machines and Systems Conference (IPROMS 2005), Cardiff, UK,

Brownsword, M. and Setchi, Rossitza

2005. Picturing risk-connecting industries. Presented at: IEE Seminar on UML for Systems Engineers, London, UK, pp. 101-107.

Setchi, Rossitza M.

and Lagos, N. 2005. Towards the integration of performance support and e-learning: context-aware product support systems. Presented at: OTM 2005 Workshop on Ontologies, Semantics and E-Learning (WOSE05), Aiya Napa, Greece, pp. 1149-1158.

Setchi, Rossitza M.

and Lagos, N. 2005. A problem solving approach to developing product support systems. Presented at: Innovative Production Machines and Systems (I*PROMS'05), Cardiff, UK, pp. 79-84.

Setchi, Rossitza M.

, Lagos, N. and Dimov, Stefan Simeonov 2005. Semantic modelling of product support knowledge. Presented at: Innovative Production Machines and Systems (I*PROM'05), Cardiff, UK, pp. 275-280.

Pham, Duc Truong, Eldukhri, Eldaw Elzaki, Soroka, Anthony John

, Zlatanov, Vladimir, Packianather, Michael Sylvester