An analysis of mechanisms of ice-wedge casting based on geotechnical centrifuge simulations

Harris, Charles, Murton, Julian B. and Davies, Michael C.R. 2005. An analysis of mechanisms of ice-wedge casting based on geotechnical centrifuge simulations. Geomorphology 71 (3-4) , pp. 328-343. 10.1016/j.geomorph.2005.03.006

Full text not available from this repository.

Abstract

Here we interpret the outcomes of scaled geotechnical centrifuge simulation of ice-wedge casting in terms of the likely significance of Quaternary ice-wedge pseudomorphs observed within different host sediments. Six experiments were completed in which 1/30th scale models of an ice-wedge embedded within frozen host sediments beneath a 25 mm thick unfrozen active layer were thawed from the surface downwards in the geotechnical centrifuge under a 30 times gravity (30×g) acceleration. Host sediment granulometry and/or ice contents were varied in each model, with host materials comprising medium sands, fine sandy silts and silty clays. The model ice-wedge was 50 mm at the top, 150 mm deep, and extended across the full width of the 450 mm wide test box. Centrifuge scaling laws indicate that under an acceleration of 30×g, stress distribution was equivalent to a 13.5 m long section of a 4.5 m high and 1.5 m wide full-scale prototype ice-wedge, covered in an active layer of thickness equivalent to 0.75 m. Thermal regimes, measured pore pressures during thaw, observed thaw consolidation and measured host sediment geotechnical properties are utilised in the interpretation of casting mechanisms. During a single uniform thaw event it is shown that arching of infilling sediment and the formation of a void is likely if negative pore pressures are developed in the host sediment. In fine silt and clays high ice contents are more likely than in sands, thaw consolidation is greater, positive pore pressures encourage complete filling of the ice-wedge void, and soft sediment deformation is likely to cause deformation of the cast and reduce its width and depth. Though natural casting mechanisms are likely to be more complex than those simulated here, modelling experiments highlight the need for care when inferring original ice-wedge geometry from observed shape and size of Quaternary ice-wedge casts.

Item Type:	Article
Date Type:	Publication
Status:	Published
Schools:	Earth and Environmental Sciences
Uncontrolled Keywords:	Ice-wedge casts ; Modelling ; Permafrost ; Geotechnical centrifuge
Publisher:	Elsevier
ISSN:	0169555X
Last Modified:	19 Mar 2016 22:03
URI:	https://orca.cardiff.ac.uk/id/eprint/1229

Citation Data

Cited 11 times in Scopus. View in Scopus. Powered By Scopus® Data

Actions (repository staff only)

Edit Item