Al-doped Fe2O3 as a support for molybdenum oxide methanol oxidation catalysts

Bowker, Michael ORCID: https://orcid.org/0000-0001-5075-1089, Hellier, Pip, Decarolis, Donato, Gianolio, Diego, Mohammed, Khaled M. H., Stenner, Alex, Huthwelker, Thomas and Wells, Peter P. 2020. Al-doped Fe2O3 as a support for molybdenum oxide methanol oxidation catalysts. Physical Chemistry Chemical Physics 22 , pp. 18911-18918. 10.1039/D0CP01192D

Preview

PDF - Published Version Available under License Creative Commons Attribution. Download (4MB) | Preview

Abstract

We have made high surface area catalysts for the selective oxidation of methanol to formaldehyde. This is done in two ways – (i) by doping haematite with Al ions, to increase the surface area of the material, but which itself is unselective and (ii) by surface coating with Mo which induces high selectivity. Temperature programmed desorption (TPD) of methanol shows little difference in surface chemistry of the doped haematite from the undoped material, with the main products being CO2 and CO, but shifted to somewhat higher desorption temperature. However, when Mo is dosed onto the haematite surface, the chemistry changes completely to show mainly the selective product, formaldehyde, with no CO2 production, and this is little changed up to 10% Al loading. But at 15 wt% Al, the chemistry changes to indicate the presence of a strongly acidic function at the surface, with additional dimethyl ether and CO/CO2 production characteristic of the presence of alumina. Structurally, X-ray diffraction (XRD) shows little change over the range 0–20% Al doping, except for some small lattice contraction, while the surface area increases from around 20 to 100 m2 g−1. Using X-ray absorption spectroscopy (XAS) it is clear that, at 5% loading, the Al is incorporated into the Fe2O3 corundum lattice, which has the same structure as α-alumina. By 10% loading then it appears that the alumina starts to nano-crystallise within the haematite lattice into the γ form. At higher loadings, there is evidence of phase separation into separate Al-doped haematite and γ-alumina. If we add 1 monolayer equivalent of Mo to the surface there is already high selectivity to formaldehyde, but little change in structure, because that monolayer is isolated at the surface. However, when three monolayers equivalent of Mo is added, we then see aluminium molybdate type signatures in the XANES spectra at 5% Al loading and above. These appear to be in a sub-surface layer with Fe molybdate, which we interpret as due to Al substitution into ferric molybdate layers immediately beneath the topmost surface layer of molybdena. It seems like the separate γ-alumina phase is not covered by molybdena and is responsible for the appearance of the acid function products in the TPD.

Item Type:	Article
Date Type:	Publication
Status:	Published
Schools:	Chemistry Cardiff Catalysis Institute (CCI)
Publisher:	Royal Society of Chemistry
ISSN:	1463-9076
Funders:	EPSRC
Date of First Compliant Deposit:	16 June 2020
Date of Acceptance:	7 May 2020
Last Modified:	08 Aug 2023 11:09
URI:	https://orca.cardiff.ac.uk/id/eprint/132482

Citation Data

Cited 5 times in Scopus. View in Scopus. Powered By Scopus® Data

Actions (repository staff only)

Edit Item