Impact of single and multiple specimen suction control oedometer testing on the measurement of the soil–water characteristic curve

Tripathy, Snehasis ORCID: https://orcid.org/0000-0003-1632-7668, Al-Khyat, Sahar and Cleall, Peter John ORCID: https://orcid.org/0000-0002-4005-5319 2021. Impact of single and multiple specimen suction control oedometer testing on the measurement of the soil–water characteristic curve. Geotechnical Testing Journal 44 (6) , pp. 1920-1935. 10.1520/GTJ20200341

Preview

PDF - Published Version Available under License Creative Commons Attribution. Download (668kB) | Preview

Abstract

Devices that simultaneously facilitate controlling suction and applying a net stress on soil specimen provide soil–water characteristic curves (SWCCs) in terms of both the water content and degree of saturation, and volumetric deformations at various applied suctions. Such tests determine the water content of soil specimens based on the measured water volume changes at various applied suctions. However, studies have shown disagreements between the water volume–based calculated water content and the actual water content of soil specimens determined by the oven-drying method. Testing multiple soil specimens at predetermined suctions and measuring water content by the oven-drying method can overcome this but are a time-consuming approach. In this study, the impact of testing single and multiple soil specimens on the subsequently determined suction-water content and suction-degree of saturation SWCCs for the wetting process were studied. Statically compacted specimens of a sandy clay were used for establishing SWCCs using a suction control oedometer. Differences were noted between the calculated and measured water content and degree of saturation for an applied suction range of 0 to 95 kPa. Differences were noted between the SWCC fitting parameters obtained from the test results of single and multiple soil specimens. Statistical analysis suggested the differences between the results from single and multiple soil specimens testing were not significant. Corrections applied to the water volume change measurements were found to minimize these differences.

Item Type:	Article
Date Type:	Publication
Status:	Published
Schools:	Engineering
Publisher:	ASTM International
ISSN:	0149-6115
Date of First Compliant Deposit:	28 May 2021
Date of Acceptance:	22 March 2021
Last Modified:	02 May 2023 20:37
URI:	https://orca.cardiff.ac.uk/id/eprint/141551

Actions (repository staff only)

Edit Item