Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Design and manufacture of components for motor sport using computer-aided design and rapid casting technology

Davies, Huw Charles ORCID: https://orcid.org/0000-0003-2656-0260 and Clarke, Alastair ORCID: https://orcid.org/0000-0002-3603-6000 2013. Design and manufacture of components for motor sport using computer-aided design and rapid casting technology. Proc IMechE Part C: Journal of Mechanical Engineering Science 227 (12) , pp. 2751-2761. 10.1177/0954406213479079

Full text not available from this repository.

Abstract

That motor sport is synonymous with advanced manufacturing is probably true of the upper echelons such as F1, WRC and ALMS. However, at privateer level, many of the advanced manufacturing technologies, and to an extent many of the more traditional manufacturing technologies, are beyond reach due to a combination of cost and low production volumes. One technology that has the potential to make the transition from the upper echelons to the privateer level is rapid casting technology. Rapid casting combines the advantages of traditional casting, including greater flexibility during the design stage and a more effective structural behaviour, with the requirement for low production numbers synonymous with motor sport. The low-volume element is achieved through the use of rapid prototyping technology to fabricate the high quality and complex patterns used in investment casting with lower cost and shorter leading times. A potential application was investigated through the presented case study. This involved the use of rapid casting, based on the direct rapid prototyping approach, to design and manufacture an upright for a single-seater race car. The use of advanced computer-aided design/computer-aided manufacture techniques and rapid casting technology resulted in an upright that is structurally efficient (<160 MPa main load cases), has low weight (-900 g) and a reduced number of component parts.

Item Type: Article
Date Type: Publication
Status: Published
Schools: Centre for Advanced Manufacturing Systems At Cardiff (CAMSAC)
Engineering
Subjects: T Technology > TJ Mechanical engineering and machinery
T Technology > TL Motor vehicles. Aeronautics. Astronautics
Publisher: Sage / IMechE
Last Modified: 25 Oct 2022 08:36
URI: https://orca.cardiff.ac.uk/id/eprint/53701

Citation Data

Cited 4 times in Scopus. View in Scopus. Powered By Scopus® Data

Actions (repository staff only)

Edit Item Edit Item