Investigation of short-circuit fault effects on non-oriented steel at different range of magnetisations

Eldieb, Asheraf, Anayi, Fatih ORCID: https://orcid.org/0000-0001-8408-7673 and Fahmy, Ashraf 2015. Investigation of short-circuit fault effects on non-oriented steel at different range of magnetisations. Presented at: Power Engineering Conference (UPEC), 2015 50th International Universities, Stoke-on-Trent, UK, 1-4 Sept. 2015. Power Engineering Conference (UPEC), 2015 50th International Universities. 2015 50TH INTERNATIONAL UNIVERSITIES POWER ENGINEERING CONFERENCE (UPEC). IEEE, pp. 1-6.

Full text not available from this repository.

Abstract

Short circuits between sheets of magnetic core of electrical machines in service are due to inter-laminar insulation damage, manufacturing defects, edge burrs and winding faults. These inter-laminar faults lead to circulating eddy currents between the affected laminations which are larger than seen in normal operation. This paper focuses on the effect of edge burrs faults on machine laminations at different set-points and different magnetising frequencies. The experimental study is carried out by using strip tester. Based on the obtained results the presence of edge burrs faults have significant effect on the magnetic properties of magnetic cores. This study has also shown that the induced eddy currents are largely dependent on the position of the fault (edge burrs) as well as on the number of shorted laminations. Moreover, power loss separation has shown significant increase in eddy current losses component with increasing number of shorted laminations.

Item Type:	Conference or Workshop Item (Paper)
Status:	Published
Schools:	Engineering
Subjects:	T Technology > TK Electrical engineering. Electronics Nuclear engineering
Publisher:	IEEE
Last Modified:	01 Nov 2022 10:41
URI:	https://orca.cardiff.ac.uk/id/eprint/92571

Citation Data

Cited 2 times in Scopus. View in Scopus. Powered By Scopus® Data

Actions (repository staff only)

Edit Item