Habil, Monier, Anayi, Fatih ![]() ![]() |
![]() |
Habil, Monier, Anayi, Fatih ![]() ![]() |
|
Alamili, Adnan, Xue, Yiqin and Anayi, Fatih ![]() ![]() |
![]() |
Al-Zughaibi, Ali, Xue, Yiqin, Grosvenor, Roger ![]() ![]() |
|
Al-Zughaibi, Ali, Xue, Yiqin and Grosvenor, Roger ![]() |
|
Alamili, Adnan, Xue, Yiqin and Anayi, Fatih ![]() ![]() |
![]() |
Okon, Aniekan, Valera Medina, Agustin ![]() ![]() |
|
Okon, Aniekan, Kurji, Hayder, Valera Medina, Agustin ![]() Item availability restricted. |
![]() |
Zhu, Hanxing ![]() |
![]() |
Davies, Dyfyr Llywel, Xue, Yiqin, Watton, John and Williams, G. A. 2010. Comparison between experimental and computer modelling results for a pneumatic/hydraulic hybrid cylinder. Presented at: IEEE International Conference on Mechatronics and Automation, Xi'an, China, 4-7 August 2010. International Conference on Mechatronics and Automation (ICMA 2010, Xi'an, China). Piscataway, NJ: Institute of Electrical and Electronics Engineers ( IEEE ), pp. 2004-2008. 10.1109/ICMA.2010.5589197 |
![]() |
Carruthers-Watt, Benjamin Nigel, Xue, Yiqin and Morris, A. J 2010. A vision based system for strip tracking measurement in the finishing train of a hot strip mill. Presented at: IEEE International Conference on Mechatronics and Automation, Xi'an, China, 4-7 August 2010. The 2010 IEEE International Conference on Mechatronics and Automation (August 4-7, 2010, Xi'an, China). Piscataway, NJ: IEEE, pp. 1115-1120. 10.1109/ICMA.2010.5589402 |
![]() |
Xue, Yiqin and Lewis, Jamie Peter 2010. Consideration of control edge geometry to power steering characteristics. Presented at: IEEE International Conference on Mechatronics and Automation, Xi'an, China, 4-7 August 2010. ICMA 2010 2010 IEEE International Conference on Mechatronics and Automation: August 4-7, 2010, Xi'an, China. Piscataway, NJ: IEEE, pp. 583-588. 10.1109/ICMA.2010.5588374 |
![]() |
Davies, D. L., Watton, J., Xue, Yiqin and Williams, G. 2009. Experimental investigation into improved wrapper control of hot strip steel rolling mill downcoilers. Presented at: 2009 ASME Dynamic Systems and Control Conference, Hollywood, California, USA, |
![]() |
Davies, D. L. I., Watton, J., Xue, Yiqin and Williams, G. 2009. Mechanical design improvement to hot mill downcoiler. Presented at: 5th European Rolling Conference (ERC5), London, UK, |
![]() |
Bergada, J. M., Davies, D. L. I., Xue, Yiqin and Kumar, S. 2009. Experimental investigation in axial piston pumps barrel dynamics. Presented at: 10th International Conference on fluid control, measurements and visualisation (FLUCOME), Moscow, Russia, |
![]() |
Zhu, Y and Xue, Yiqin 2008. Modelling and simulation of variable displacement hydraulic pumps. Machine Tool and Hydraulics 36 (9) , pp. 263-267. |
![]() |
Xue, Yiqin, Syred, Nicholas, Rodriguez-Martinez, V. and O'Doherty, Timothy ![]() |
![]() |
Xue, Yiqin and Watton, John 2005. Modelling of a hydraulic power steering system. International Journal of Vehicle Design 38 (2/3) , pp. 162-178. 10.1504/IJVD.2005.007290 |
![]() |
Xue, Yiqin and Yosup, M. Y. 2005. Time domain simulation of air transmission lines. Presented at: 8th International Symposium on Fluid Control, Measurement and Visualisation (FLUCOME), Chengdu, China, (277) |
![]() |
Xue, Yiqin, Qin, Y. and Syred, Nicholas 2005. Controller prediction using artificial neural networks. Presented at: 4th Conference on Applied Cybernetics, London, UK, pp. 100-104. |
![]() |
Xue, Yiqin, Yusop, M. J. and Ji, X. 2004. Energy saving in pneumatic actuation using the gas law prediction. Presented at: Bath Workshop on Power Transmission and Motion Control (5th:2003), Bath, UK, 10-12 September 2003. Published in: Burrows, C. R. and Edge, K. A. eds. Bath Workshop on Power Transmission and Motion Control: PTMC 2003. , vol.1 London: Professional Engineering Publishing, pp. 319-331. |
![]() |
Xue, Yiqin 2004. Control of a time-delay system using network prediction and gain scheduling method. Presented at: 6th International Conference on Frontiers of Design and Manufacturing, Xi'an, China, |
![]() |
Xue, Yiqin, Syred, Nicholas, Rodriguez-Martinez, V. M. and O'Doherty, Timothy ![]() |
![]() |
Xue, Yiqin and Watton, John 2002. Neutral prediction in control of time-delay systems. Presented at: Institution of Mechanical Engineers (IMechE) seminar: Recent Developments in Control Techniques for Actuators, London, UK, 9 December 2002. Proceedings of Recent Development in Control Techniques for Actuators, London, UK, 9 December 2002. London: Institution of Mechanical Engineers, |
![]() |
Xue, Yiqin and Watton, John 2002. Issues on motion control using visual feedback. Presented at: Institution of Mechanical Engineers (IMechE) seminar: Recent Developments in Control Techniques for Actuators, London, UK, 9 December 2002. Proceedings of Recent Development in Control Techniques for Actuators, London, UK, 9 December 2002. London: Institution of Mechanical Engineers, |
![]() |
Xue, Yiqin and Watton, John 2002. Position control of a pneumatic servo-actuator with time-delay using a neural network predictor. Presented at: The 5th JFPS International Symposium on Fluid Power, Nara, Japan, pp. 637-642. |
![]() |