Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Browse by All Cardiff Authors

Number of items: 21.

Lacan, Franck ORCID:, Johnston, Richard, Carrington, Rhys, Spezi, Emiliano ORCID: and Theobald, Peter ORCID: 2023. Towards using a multi-material, pellet-fed additive manufacturing platform to fabricate novel imaging phantoms. Journal of Medical Engineering & Technology 47 , pp. 189-196. 10.1080/03091902.2023.2193267

Keenan, B. E. ORCID:, Lacan, F. ORCID:, Cooper, A., Evans, S. L. ORCID: and Evans, J. ORCID: 2022. MRI safety, imaging artefacts, and grid distortion evaluated for FFP3 respiratory masks worn throughout the COVID-19 pandemic. Clinical Radiology 77 (8) , e660-e666. 10.1016/j.crad.2022.05.001

Liu, Chao, Le Roux, Leopold, Körner, Carolin, Tabaste, Olivier, Lacan, Franck ORCID: and Bigot, Samuel ORCID: 2022. Digital twin-enabled collaborative data management for metal additive manufacturing systems. Journal of Manufacturing Systems 62 , pp. 857-874. 10.1016/j.jmsy.2020.05.010

Bhaduri, Debajyoti ORCID:, Singh, Sukhwinder, Lacan, Franck ORCID:, Ryan, Michael ORCID: and Gangopadhyay, Soumya 2022. A pilot study for the generation of sustainable powders for metal additive manufacturing. Presented at: CIRP Winter Meeting 2022, STC 'E', Paris, France, 16-18 February 2022.

Han, Quanquan, Gu, Yuchen, Soe, Shwe, Lacan, Franck ORCID: and Setchi, Rossitza ORCID: 2020. Effect of hot cracking on the mechanical properties of Hastelloy X superalloy fabricated by laser powder bed fusion additive manufacturing. Optics and Laser Technology 124 , 105984. 10.1016/j.optlastec.2019.105984

Han, Quanquan, Gu, Yuchen, Setchi, Rossitza ORCID:, Lacan, Franck ORCID:, Johnston, Richard, Evans, Sam L. ORCID: and Yang, Shoufeng 2019. Additive manufacturing of high-strength crack-free Ni-based Hastelloy X superalloy. Additive Manufacturing 30 , 100919. 10.1016/j.addma.2019.100919

Crayford, Andrew P. ORCID:, Lacan, Franck ORCID:, Runyon, Jon ORCID:, Bowen, Philip J. ORCID:, Balwadkar, Shrinivas, Harper, Joseph ORCID: and Pugh, Daniel G. 2019. Manufacture, characterization and stability limits of an AM prefilming air-blast atomizer. Presented at: ASME Turbo Expo 2019: Turbomachinery Technical Conference and Exposition, Phoenix, AZ, USA, 17-21 June 2019. Turbo Expo: Power for Land, Sea and Air. Volume 4B: Combustion, Fuels, and Emissions. ASME, 10.1115/GT2019-91624

Qin, Jian, Liu, Ying ORCID:, Grosvenor, Roger ORCID:, Lacan, Franck ORCID: and Jiang, Zhigang 2019. Deep learning-driven particle swarm optimisation for additive manufacturing energy optimisation. Journal of Cleaner Production , p. 118702. 10.1016/j.jclepro.2019.118702

Han, Quanquan, Gu, Heng, Soe, Shwe, Setchi, Rossi ORCID:, Lacan, Franck ORCID: and Hill, Jacob 2018. Manufacturability of AlSi10Mg overhang structures fabricated by laser powder bed fusion. Materials & Design 160 , pp. 1080-1095. 10.1016/j.matdes.2018.10.043

O'Regan, Paul, Prickett, Paul ORCID: and Lacan, Franck ORCID: 2018. Selective laser melting: the use of metrology to assure process integrity. Presented at: 2018 ASPE and euspen Summer Topical Meeting, Lawrence Berkeley National Laboratory,Berkeley, California, USA, 22 to 25 July 2018. Advancing Precision in Additive Manufacturing. , vol.69 Raleigh, USA: The American Society for Precision Engineering, pp. 143-149.

Babenko, Maksims, Sweeney, John, Petkov, Petko ORCID:, Lacan, Franck ORCID:, Bigot, Samuel ORCID: and Whiteside, Ben 2018. Evaluation of heat transfer at the cavity-polymer interface in microinjection moulding based on experimental and simulation study. Applied Thermal Engineering 130 , pp. 865-876. 10.1016/j.applthermaleng.2017.11.022

Han, Quanquan, Geng, Yanquan, Setchi, Rossitza ORCID:, Lacan, Franck ORCID:, Gu, Dongdong and Evans, Sam L. ORCID: 2017. Macro and nanoscale wear behaviour of Al-Al 2 O 3 nanocomposites fabricated by selective laser melting. Composites Part B: Engineering 127 , pp. 26-35. 10.1016/j.compositesb.2017.06.026

Han, Quanquan, Setchi, Rossitza ORCID:, Lacan, Franck ORCID:, Gu, Dongdong and Evans, Samuel L. ORCID: 2017. Selective laser melting of advanced Al-Al 2 O 3 nanocomposites: simulation, microstructure and mechanical properties. Materials Science and Engineering: A 698 , pp. 162-173. 10.1016/j.msea.2017.05.061

Dorrington, Peter, Lacan, Franck Andre ORCID: and Bigot, Samuel ORCID: 2016. How are micro enterprises adopting emergent technologies? Presented at: 3rd International Conference on Sustainable Design and Manufacturing (SDM-2016), Chania, Greece, 4-6 April 2016. Published in: Setchi, Rossitza ORCID:, Howlett, Robert J., Liu, Ying ORCID: and Theobald, Peter ORCID: eds. Sustainable Design and Manufacturing 2016. Sustainable Design and Manufacturing 2016. Smart Innovation, Systems and Technologies (SIST) , vol.52 (52) Cham: Springer, pp. 215-226. 10.1007/978-3-319-32098-4_19

Bigot, Samuel ORCID:, Lacan, Franck Andre ORCID:, Hirshy, Hassan ORCID:, Petkov, Petko Vladev ORCID:, Babenko, M., Castro, G. G., Sweeney, J., Ugail, H. and Whiteside, B. 2014. Micro and nano structuring of sapphire for Micro Injection process investigation. Presented at: 9th International Conference on Micromanufacturing, Singapore, China, 25-28 March 2014. 9th International Conference on MicroManufacturing.

Griffiths, C. A., Dimov, S. S., Rees, A., Dellea, O., Gavillet, J., Lacan, Franck Andre ORCID: and Hirshy, Hassan ORCID: 2013. A novel texturing of micro injection moulding tools by applying an amorphous hydrogenated carbon coating. Surface and Coatings Technology 235 , pp. 1-9. 10.1016/j.surfcoat.2013.07.006

Vella, Pierre C., Dimov, Stefan Simeonov, Kolew, Alexander, Minev, Ekaterin, Popov, Krastimir Borisov, Lacan, Franck Andre ORCID:, Griffiths, Christian Andrew, Hirshy, Hassan ORCID: and Scholz, Steffen Gerhard 2012. Bulk Metallic Glass based Tool-Making Process Chain for Micro- and Nano- Replication. Presented at: 4M 2012 - 9th International Conference on Multi-Material Micro Manufacture, Vienna, Austria, 9–11 October 2012. Published in: Noll, H., Adamovic, N. and Dimov, Stefan Simeonov eds. Proceedings of the 9th International Conference on Multi-Material Micro Manufacture. Singapore: Research Publishing, p. 309. 10.3850/978-981-07-3353-7_300

Dimov, Stefan Simeonov, Petkov, Petko Vladev ORCID:, Lacan, Franck Andre ORCID: and Scholz, Steffen Gerhard 2011. Laser milling: Tool making capabilities. Presented at: 30th International Congress on Applications of Lasers and Electro Optics (ICALEO), Orlando, FL, USA, 23-27 October 2011.

Lacan, Franck Andre ORCID:, Scholz, Steffen Gerhard, Petkov, Petko Vladev ORCID: and Dimov, Stefan Simeonov 2011. Manufacturing of an array of microneedles in a steel insert for micro-injection moulding using laser milling. Presented at: 8th International Conference on Multi-Material Micro-Manufacture, Stuttgart, Germany, 8-10 November 2011. Published in: Kück, Heinz, Reinecke, Holger and Dimov, Stefan Simeonov eds. 4M2011-Proceedings of the 8th International Conference on Multi-Material Micro Manufacture. Research Publishing, pp. 336-339. 10.3850/978-981-07-0319-6_249

Dimov, Stefan Simeonov, Pham, Duc Truong, Lacan, Franck Andre ORCID: and Dotchev, K. D. 2001. Rapid tooling applications of the selective laser sintering process. Assembly Automation 21 (4) , pp. 296-302.

Pham, Duc Truong, Dimov, Stefan Simeonov and Lacan, Franck Andre ORCID: 1998. Techniques for firm tooling using rapid prototyping. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 212 (4) , pp. 269-277. 10.1243/0954405981515680

This list was generated on Wed Jun 12 08:46:59 2024 BST.