Cardiff University | Prifysgol Caerdydd ORCA
Online Research @ Cardiff 
WelshClear Cookie - decide language by browser settings

Browse by Current Cardiff authors

[up] Up a level
Number of items: 43.

Robinson, Michael, Han, Quanquan, Gu, Heng, Soe, Shwe and Setchi, Rossitza ORCID: https://orcid.org/0000-0002-7207-6544 2020. The effect of heat treatment of AlSi10Mg on the energy absorption performance of surface-based structures. Presented at: 7th International Conference on Sustainable Design and Manufacturing KES-SDM 2020, Virtual, 9-11 Sept 2020. Published in: Scholtz, Steffen G., Howlett, Robert J. and Setchi, Rossi eds. Sustainable Design and Manufacturing 2020. , vol.200 Springer, pp. 395-402. 10.1007/978-981-15-8131-1_35

Soe, Shwe, Robinson, Michael, Giasin, Khaled ORCID: https://orcid.org/0000-0002-3992-8602, Adams, Rhosslyn, Palkowski, Tony and Theobald, Peter ORCID: https://orcid.org/0000-0002-3227-7130 2020. Using FFF and topology optimisation to increase crushing strength in equestrian helmets. Presented at: 7th International Conference on Sustainable Design and Manufacturing KES-SDM 2020, Virtual, 9-11 Sept 2020. Published in: Scholz, Steffen G., Howlett, Robert J. and Setchi, Rossi eds. Sustainable Design and Manufacturing 2020. , vol.200 Springer, pp. 369-377. 10.1007/978-981-15-8131-1_33

Han, Quanquan, Gu, Yuchen, Soe, Shwe, Lacan, Franck ORCID: https://orcid.org/0000-0002-3499-5240 and Setchi, Rossitza ORCID: https://orcid.org/0000-0002-7207-6544 2020. Effect of hot cracking on the mechanical properties of Hastelloy X superalloy fabricated by laser powder bed fusion additive manufacturing. Optics and Laser Technology 124 , 105984. 10.1016/j.optlastec.2019.105984
file

Adams, Rhosslyn, Soe, Shwe P., Santiago, Rafael, Robinson, Michael, Hanna, Benjamin, McShane, Graham, Alves, Marcílio, Burek, Roy and Theobald, Peter ORCID: https://orcid.org/0000-0002-3227-7130 2019. A novel pathway for efficient characterisation of additively manufactured thermoplastic elastomers. Materials and Design 180 , 107917. 10.1016/j.matdes.2019.107917
file

Guan, Debao, Ahmad, Faizan, Theobald, Peter ORCID: https://orcid.org/0000-0002-3227-7130, Soe, Shwe, Luo, Xiaoyu and Gao, Hao 2019. On the AIC-based model reduction for the general Holzapfel-Ogden myocardial constitutive law. Biomechanics and Modeling in Mechanobiology 18 , pp. 1213-1232. 10.1007/s10237-019-01140-6
file

Robinson, Michael, Soe, Shwe, Johnston, Richard, Adams, Rhosslyn, Hanna, Benjamin, Burek, Roy, McShane, Graham, Celeghini, Rafael, Alves, Marcilio and Theobald, Peter ORCID: https://orcid.org/0000-0002-3227-7130 2019. Mechanical characterisation of additively manufactured elastomeric structures for variable strain rate applications. Additive Manufacturing 27 , -. 10.1016/j.addma.2019.03.022
file

Ahmad, Faizan, Prabhu, Raj., Liao, Jun, Soe, Shwe, Jones, Michael D. ORCID: https://orcid.org/0000-0002-6058-6029, Miller, Jonathan, Berthelson, Parker, Enge, Daniel, Copeland, Katherine M., Shaabeth, Samar, Johnston, Richard, Maconochie, Ian and Theobald, Peter S. ORCID: https://orcid.org/0000-0002-3227-7130 2018. Biomechanical properties and microstructure of neonatal porcine ventricles. Journal of the Mechanical Behavior of Biomedical Materials 88 , pp. 18-28. 10.1016/j.jmbbm.2018.07.038
file

Han, Quanquan, Gu, Heng, Soe, Shwe, Setchi, Rossi ORCID: https://orcid.org/0000-0002-7207-6544, Lacan, Franck ORCID: https://orcid.org/0000-0002-3499-5240 and Hill, Jacob 2018. Manufacturability of AlSi10Mg overhang structures fabricated by laser powder bed fusion. Materials & Design 160 , pp. 1080-1095. 10.1016/j.matdes.2018.10.043
file

Ahmad, F., Soe, S., White, N, Johnston, R, Khan, I, Liao, J, Jones, M. ORCID: https://orcid.org/0000-0002-6058-6029, Prabhu, R, Maconochie, I and Theobald, Peter ORCID: https://orcid.org/0000-0002-3227-7130 2018. Region-specific microstructure in the neonatal ventricles of a porcine model. Annals of Biomedical Engineering 46 (12) , pp. 2162-2176. 10.1007/s10439-018-2089-4
file

Feng, Qixiang, Tang, Qian, Liu, Ying ORCID: https://orcid.org/0000-0001-9319-5940, Setchi, Rossitza ORCID: https://orcid.org/0000-0002-7207-6544, Soe, Shwe, Ma, Shuai and Bai, Long 2018. Quasi-static analysis of mechanical properties of Ti6Al4V lattice structures manufactured using selective laser melting. International Journal of Advanced Manufacturing Technology 94 (5-8) , pp. 2301-2313. 10.1007/s00170-017-0932-7

Jabi, Wassim ORCID: https://orcid.org/0000-0002-2594-9568, Soe, Shwe, Theobald, Peter ORCID: https://orcid.org/0000-0002-3227-7130, Aish, Robert and Lannon, Simon ORCID: https://orcid.org/0000-0003-4677-7184 2017. Enhancing parametric design through non-manifold topology. Design Studies 52 , pp. 96-114. 10.1016/j.destud.2017.04.003
file

Robinson, M., Soe, Shwe, McShane, G., Celeghini, R., Burek, R., Alves, M. and Theobald, Peter ORCID: https://orcid.org/0000-0002-3227-7130 2017. Developing elastomeric cellular structures for multiple head impacts. Presented at: 2017 IRCOBI Conference, Antwerp, Belgium, 13–15 September 2017.
file

Soe, Shwe, Jabi, Wassim ORCID: https://orcid.org/0000-0002-2594-9568 and Theobald, Peter ORCID: https://orcid.org/0000-0002-3227-7130 2016. Evaluating innovative CAD techniques in the creation of conformal cellular structures. Presented at: 3rd International Conference on Sustainable Design and Manufacturing (SDM-2016), Heraklion, Greece, 4-6 April 2016. Published in: Setchi, Rossitza, Hewlett, Robert, Liu, Ying and Theobald, Peter eds. Sustainable Design and Manufacturing 2016. Smart Innovation, Systems and Technologies , vol.52 Springer International, pp. 387-397. 10.1007/978-3-319-32098-4_33
Item availability restricted.
file

Romli, Awanis, Prickett, Paul ORCID: https://orcid.org/0000-0001-8985-7278, Setchi, Rossitza ORCID: https://orcid.org/0000-0002-7207-6544 and Soe, Shwe 2016. An integrated eco-design decision making tool. Presented at: SDM 2016, Crete, Greece, 4-6 April 2016. Published in: Setchi, R., Howlett, R., Liu, Y. and Theobald, P. eds. Sustainable Design and Manufacturing 2016. Smart Innovation, Systems and Technologies , vol.52 Cham: Springer, 10.1007/978-3-319-32098-4_46

Soe, Shwe, Martin, Philip Stephen, Jones, M., Robinson, Michael Richard and Theobald, Peter ORCID: https://orcid.org/0000-0002-3227-7130 2015. Feasibility of optimising bicycle helmet design safety through the use of additive manufactured TPE cellular structures. International Journal of Advanced Manufacturing Technology 79 (9) , pp. 1975-1982. 10.1007/s00170-015-6972-y

Romli, Awanis, Setchi, Rossitza ORCID: https://orcid.org/0000-0002-7207-6544, Soe, Shwe and Prickett, Paul ORCID: https://orcid.org/0000-0001-8985-7278 2015. Eco-case based reasoning (Eco-CBR) for supporting sustainable product design. Presented at: SDM'2015: 2nd International Conference on Sustainable Design and Manufacturing, Seville, Spain, 12-14 April 2015.
file

Soe, Shwe, Ryan, Michael ORCID: https://orcid.org/0000-0002-8104-0121, McShane, Graham and Theobald, Peter ORCID: https://orcid.org/0000-0002-3227-7130 2015. Energy absorption characteristics of additively manufactured TPE cellular structures. Presented at: Second International Conference on Sustainable Design and Manufacturing, Seville, Spain, 12-14 April 2015.

Romli, Awanis, Prickett, Paul ORCID: https://orcid.org/0000-0001-8985-7278, Setchi, Rossitza ORCID: https://orcid.org/0000-0002-7207-6544 and Soe, Shwe 2015. Integrated eco-design decision-making for sustainable product development. International Journal of Production Research 53 (2) , pp. 549-571. 10.1080/00207543.2014.958593

Soe, Shwe, Martindale, Nick, Constantinou, Chris and Robinson, Michael Richard 2014. Mechanical characterisation of Duraform® Flex for FEA hyperelastic material modelling. Polymer Testing 34 , pp. 103-112. 10.1016/j.polymertesting.2014.01.004

Soe, Shwe and Eyers, Daniel Roy ORCID: https://orcid.org/0000-0001-5499-0116 2014. FEA support structure generation for the additive manufacture of CastForm polystyrene patterns. Polymer Testing 33 , pp. 187-197. 10.1016/j.polymertesting.2013.08.009

Soe, Shwe, Robinson, Michael Richard, Martin, Philip Stephen, Jones, Michael David ORCID: https://orcid.org/0000-0002-6058-6029 and Theobald, Peter ORCID: https://orcid.org/0000-0002-3227-7130 2014. Feasibility of using Duraform® flex lattice structures and additive manufacturing for optimising bicycle helmet design safety. Presented at: SDM'14: International Conference on Sustainable Design and Manufacturing, Cardiff, Wales, 28-30 April 2014. Sustainable Design and Manufacturing: SDM-14: Pre-Proceedings. , vol.1 (1) England: KES International, pp. 278-290.

Romli, Awanis, Prickett, Paul William ORCID: https://orcid.org/0000-0001-8985-7278, Setchi, Rossitza ORCID: https://orcid.org/0000-0002-7207-6544 and Soe, Shwe 2014. Sensitivity analysis of an eco-design house of quality model. Presented at: SDM'14: International Conference on Sustainable Design and Manufacturing, Cardiff, Wales, UK, 28-30 April 2014. pp. 488-499.

Mousa, Alkhair A., Pham, Duc Troung and Soe, Shwe 2014. Pre-processing studies for selective laser sintering of glass beads-filled polyamide 12 composites. International Journal of Rapid Manufacturing 4 (1) , pp. 28-48. 10.1504/IJRAPIDM.2014.062036

Soe, Shwe, Eyers, Daniel Roy ORCID: https://orcid.org/0000-0001-5499-0116, Le, Chi Hieu and Romli, Awanis 2014. Additive tooling for tube hydroforming. Key Engineering Materials 572 , pp. 269-272. 10.4028/www.scientific.net/KEM.572.269

Romli, Awanis, Prickett, Paul William ORCID: https://orcid.org/0000-0001-8985-7278, Setchi, Rossitza ORCID: https://orcid.org/0000-0002-7207-6544 and Soe, Shwe 2013. A conceptual model for sustainable product design. Key Engineering Materials 572 , pp. 3-6. 10.4028/www.scientific.net/KEM.572.3

Romli, Awanis, Prickett, Paul William ORCID: https://orcid.org/0000-0001-8985-7278, Setchi, Rossitza ORCID: https://orcid.org/0000-0002-7207-6544 and Soe, Shwe 2013. A Conceptual Model for Sustainable Product Design. Presented at: 5th International Conference on Advanced Design and Manufacture (ADM2013), Valencia, Spain, 25-28 September 2013.

Soe, Shwe, Eyers, Daniel Roy ORCID: https://orcid.org/0000-0001-5499-0116 and Romli, Awanis 2013. Additive Tooling for Tube Hydroforming. Presented at: 5th International Conference on Advanced Design and Manufacture (ADM2013), Valencia, Spain, 25-28 September 2013.

Soe, Shwe, Eyers, Daniel Roy ORCID: https://orcid.org/0000-0001-5499-0116 and Setchi, Rossitza ORCID: https://orcid.org/0000-0002-7207-6544 2013. Assessment of non-uniform shrinkage in the laser sintering of polymer materials. International Journal of Advanced Manufacturing Technology 68 (1-4) , pp. 111-125. 10.1007/s00170-012-4712-0

Soe, Shwe, Eyers, Daniel Roy ORCID: https://orcid.org/0000-0001-5499-0116, Jones, Toby and Nayling, Nigel 2012. Additive Manufacturing for archaeological reconstruction of a medieval ship. Rapid Prototyping Journal 18 (6) , pp. 443-450. 10.1108/13552541211271983

Soe, Shwe, Eyers, Daniel Roy ORCID: https://orcid.org/0000-0001-5499-0116, Potter, Andrew Thomas ORCID: https://orcid.org/0000-0002-3157-9735, Jones, T. and Nayling, N. 2012. The application of laser sintering for archaeological model-making. Presented at: Innovative Developments in Virtual and Physical Prototyping: Proceedings of the 5th International Conference on Advanced Research in Virtual and Rapid Prototyping, Leiria, Portugal, 28 September - 1 October 2011. Published in: Bartolo, Paulo Jorge ed. Innovative Developments in Virtual and Physical Prototyping. INNOVATIVE DEVELOPMENTS ON VIRTUAL AND PHYSICAL PROTOTYPING. Boca Raton, Fl. USA: CRC Press, pp. 757-762. 10.1201/b11341-121

Soe, Shwe 2012. Quantitative analysis on SLS part curling using EOS P700 machine. Journal of Materials Processing Technology 212 (11) , pp. 2433-2442. 10.1016/j.jmatprotec.2012.06.012

Eyers, Daniel Roy ORCID: https://orcid.org/0000-0001-5499-0116, Soe, Shwe and Yusmawiza, Wan 2012. Laser Sintering for the Fabrication of Architectural Models. Presented at: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME’2012), Kuala Lumpur, Malaysia, 3-5 July 2012.

Le, C. H., Okereke, M. I., Nguyen, V. H., Dao, V. D, Soe, Shwe, Zlatov, N. and Le, T. H. 2011. Personalised medical product development: methods, challenges and opportunities. Romanian Review Precision Mechanics, Optics & Mechatronics 40 , pp. 11-20.

Soe, Shwe 2010. Improving dimensional accuracy in the production of a CastForm™ polystyrene pattern for investment casting. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 224 (11) , pp. 1663-1670. 10.1243/09544054JEM1566

Eyers, Daniel Roy ORCID: https://orcid.org/0000-0001-5499-0116, Wong, Hartanto and Soe, Shwe 2009. Re-articulating the role of process design to support mass customisation: The case of rapid manufactured custom-made fixtures. Presented at: 16th International EurOMA Conference, Gothenburg, Sweden, 14-17 June 2009.
file

Dotchev, Krassimir, Pham, Duc Truong, Yusoff, W. A. Y. and Soe, Shwe 2008. Investigation on polyamide powder properties deterioration and efficient powder recycling in Laser Sintering. Presented at: 3rd International Conference on Advanced Research in Virtual and Rapid Prototyping, Leira, Portugal, 24-29 September 2007. Published in: Bártolo, Paulo ed. Virtual and rapid manufacturing: advanced research in virtual and rapid prototyping. VIRTUAL AND RAPID MANUFACTURING. Balkema-Proceedings and Monographs in Engineering, Water, and Earth Sciences London: Taylor & Francis, pp. 545-552.

Dotchev, Krassimir and Soe, Shwe 2006. Rapid manufacturing of patterns for investment casting: improvement of quality and success rate. Rapid Prototyping Journal 12 (3) , pp. 156-164. 10.1108/13552540610670735

Dunne, P., Soe, Shwe, Byrne, G., Venus, A. D. and Wheatley, A. R. 2004. Some demands on rapid prototypes used as master patterns in rapid tooling for injection moulding. Journal of Materials Processing Technology 150 (3) , pp. 201-207. 10.1016/S0924-0136(03)00571-5

Soe, Shwe 1999. New demands on rapid prototypes in advanced tooling technologies. Presented at: Manufacturing for a Global Market. Proceedings of the Fifteenth Conference of the International Foundation for Production Research. ICPR-15, Limerick, Ireland, 9th-12th August 1999.

Soe, Shwe, Dunne, P., Byrne, G., Venus, A. and Wheatley, A. 1999. A review of the requirements of rapid prototypes in secondary tooling techniques. Presented at: 2nd World Manufacturing Congress, Durham, UK, 27-30 Sept 1999. Published in: Nahavandi, S. and Saadat, M. eds. Proceedings of the 2nd World Manufacturing Congress: WMC 1999. ICSC, pp. 382-388.

Venus, A. D., Soe, Shwe, Elder, J. W. and Wheatley, A. R. 1999. The development of a resin coated sand tooling process for the manufacture of plastic components. Presented at: ANTEC '99 conference proceedings : Plastics - Bridging the Millenia, New York City, NY, USA, 2-6 May 1999. ANTEC '99 conference proceedings : Plastics - Bridging the Millenia. ANTEC '99: PLASTICS BRIDGING THE MILLENNIA, CONFERENCE PROCEEDINGS, VOLS I-III. Brookfield: Society of Plastics Engineers, pp. 3994-3999.

Soe, Shwe 1998. Foundry shell sand moulding: A tooling opportunity for plastic injection moulding. Presented at: Time Compression Technologies Conference, Nottingham, UK, 13-14 October 1998.

Venus, A. D. and Soe, Shwe 1997. Study of electro and electroless plating of metal on to SLS parts for rapid tooling applications. Presented at: Second National Conference on Developments in Rapid Prototyping and Tooling, High Wycombe, UK, 18-19 November 1996. Second National Conference on Developments in Rapid Prototyping and Tooling Research. Second National Conference on Developments in Rapid Prototyping and Tooling. Bury St. Edmunds, UK: Mechanical Engineering Publications, pp. 171-186.

This list was generated on Sat Dec 21 06:13:24 2024 GMT.


Maintained by Cardiff University Information Services