Browse by Current Cardiff authors

, Kooij, Chris and Wauters, Phillippe 2024. Application of the Fuller-Thompson equation in sinter blend design to increase sinter productivity. Ironmaking & Steelmaking 51 (6) , pp. 556-570. 10.1177/03019233241248255

Gilbert, Sophie J., Jones, Ryan, Egan, Ben J., Bonnet, Cleo Selina, Evans, Sam L.

and Mason, Deborah J.

2024. Investigating mechanical and inflammatory pathological mechanisms in osteoarthritis using MSC-derived osteocyte-like cells in 3D. Frontiers in Endocrinology 15 , 1359052. 10.3389/fendo.2024.1359052

Ahmadinia, Masoud, Setchi, Rossi

, Baker, Tony, Gregory, Steve, Cox, Julian, Rodriguez, Lucia Garcia, Giblin, Steve, Clode, Steve, Litos, Lampros and Paddea, Sanjooram 2024. Transforming e-waste into value: A circular economy approach to PCB recycling. Presented at: 10th International Conference on Sustainable Design and Manufacturing (KES-SDM 2023), 18-20 September 2023. Published in: Scholz, Steffen G., Howlett, Robert J. and Setchi, Rossi eds. Sustainable Design and Manufacturing 2023: Proceedings of the 10th International Conference on Sustainable Design and Manufacturing (KES-SDM 2023). , vol.377 Springer, pp. 275-285. 10.1007/978-981-99-8159-5_24

Zappalá, Stefano, Keenan, Bethany E.

, Marshall, David

, Wu, Jing

and Al-Dirini, Rami M.A. 2024. In vivo strain measurements in the human buttock during sitting using MR-based digital volume correlation. Journal of Biomechanics 163 , 111913. 10.1016/j.jbiomech.2023.111913

Potts, Matthew R., Evans, Sam L.

, Coulman, Sion A.

, Birchall, James C.

and Wyatt, Hayley 2023. An analysis of the relationship between microneedle spacing, needle force and skin strain during the indentation phase prior to skin penetration. Computer Methods in Biomechanics and Biomedical Engineering 26 (14) , pp. 1719-1731. 10.1080/10255842.2022.2136486

Evans, S. L.

, Keenan, B. E.

, Hill, J., Zappala, S., Bennion, N. and Avril, S. 2023. Rapid, non-invasive, in vivo measurement of tissue mechanical properties using gravitational loading and a nonlinear virtual fields method. Journal of the Royal Society. Interface 20 (207) , 20230384. 10.1098/rsif.2023.0384

Walden, Steven J., Rowe, Wendy, Mulville, Jacqui

and Zioupos, Peter 2023. Quantifying microcracks on fractured bone surfaces - potential use in forensic anthropology. Journal of the Mechanical Behavior of Biomedical Materials 142 , 105824. 10.1016/j.jmbbm.2023.105824

Potts, Matthew R., Bennion, Nicholas J., Zappala, Stefano, Marshall, David

, Harrison, Rob and Evans, Sam L.

2023. Fabrication of a positional brain shift phantom through the utilization of the frozen intermediate hydrogel state. Journal of the Mechanical Behavior of Biomedical Materials 140 , 105704. 10.1016/j.jmbbm.2023.105704

Ahmadinia, Masoud

, Velenturf, Anne, Setchi, Rossi

, McKendree, Jean and Bolton, Jon 2023. Transforming the uk metal industries: challenges and opportunities. Presented at: International Conference on Sustainable Design and Manufacturing, Split, Croatia, 14-16 September 2022. International Conference on Sustainable Design and Manufacturing. Smart Innovation, Systems and Technologies , vol.338 pp. 43-56. 10.1007/978-981-19-9205-6_5

Bennion, Nicholas J., Zappalá, Stefano, Potts, Matthew, Woolley, Max, Marshall, David

and Evans, Sam L.

2022. In vivo measurement of human brain material properties under quasi-static loading. Journal of the Royal Society. Interface 19 (197) , 20220557. 10.1098/rsif.2022.0557

Menendez, Guillermo, Kynaston, Thomas, Villar-Garcia, Ignacio J., Gao, Min, Evans, Sam L.

and Rocha, Victoria G. 2022. Enabling water-based processing of graphene/alumina composites using an infiltration approach with amphiphilic triblock copolymers. Journal of the European Ceramic Society 42 (14) , pp. 6574-6582. 10.1016/j.jeurceramsoc.2022.07.009

Abdullah, Johari Yap, Caggiari, Silvia, Keenan, Bethany

, Bader, Dan L., Mavrogordato, Mark N., Rankin, Kathryn, Evans, Sam L.

and Worsley, Peter R. 2022. A combined imaging, deformation and registration methodology for predicting respirator fitting. PLoS ONE 17 (11) , e0277570. 10.1371/journal.pone.0277570

Kovaleva, Marina, Dziedzic, Dominik, Mashruk, Syed, Evans, Sam

, Valera Medina, Agustin

and Galindo-Nava, Enrique 2022. The evaluation of ammonia/hydrogen combustion on the H permeation and embrittlement of nickel-base superalloys. Presented at: American Society of Mechanical Engineers, Rotterdam, Netherlands, 13 - 17 June 2022. Proceedings of ASME Turbo Expo 2022. ASME, p. 82239. 10.1115/GT2022-82239

Keenan, B. E.

, Lacan, F.

, Cooper, A., Evans, S. L.

and Evans, J.

2022. MRI safety, imaging artefacts, and grid distortion evaluated for FFP3 respiratory masks worn throughout the COVID-19 pandemic. Clinical Radiology 77 (8) , e660-e666. 10.1016/j.crad.2022.05.001

Keenan, Bethany E.

and Oomens, Cees 2022. A review of foot finite element modelling for pressure ulcer prevention in bedrest: current perspectives and future recommendations. Journal of Tissue Viability 31 (1) , pp. 73-83. 10.1016/j.jtv.2021.06.004

Castelli, A., Norville, P., Kiernan, M., Maillard, J-Y.

and Evans, S.L.

2022. Review of decontamination protocols for shared non-critical objects in 35 policies of UK NHS acute care organizations. Journal of Hospital Infection 120 , pp. 65-72. 10.1016/j.jhin.2021.10.021

Zappala, Stefano, Bennion, Nicholas J., Potts, Matthew R., Wu, Jing

, Kusmia, Slawomir, Jones, Derek K.

and Marshall, David

2021. Full-field MRI measurements of in-vivo positional brain shift reveal the significance of intra-cranial geometry and head orientation for stereotactic surgery. Scientific Reports 11 (1) , 17684. 10.1038/s41598-021-97150-5

Nishio Ayre, Wayne

, Scully, Nicole, Elford, Carole, Evans, Bronwen AJ

, Rowe, Wendy, Rowlands, Jeff, Mitha, Ravi, Malpas, Paul, Manti, Panagiota, Holt, Cathy

, Morgan-Jones, Rhidian, Birchall, James

, Denyer, Stephen P and Evans, Sam L

2021. Alternative radiopacifiers for polymethyl methacrylate bone cements: Silane-treated anatase titanium dioxide and yttria-stabilised zirconium dioxide. Journal of Biomaterials Applications 35 (10) , pp. 1235-1252. 10.1177/0885328220983797

Walden, Steven J, Evans, Sam L

, Mulville, Jacqui

, Wilson, Karen and Board, Scott 2021. Progressive dehydration in decomposing bone: a potential tool for forensic anthropology. Journal of Thermal Analysis and Calorimetry 143 , pp. 3517-3524. 10.1007/s10973-020-10144-9

Borodich, Feodor M.

, Al-Musawi, Raheem S., Brousseau, Emmanuel B.

and Evans, Sam L.

2021. Comparison between torsional spring constants of rectangular and V-shaped AFM cantilevers. IEEE Transactions on Nanotechnology 20 , pp. 168-176. 10.1109/TNANO.2021.3059411

Keenan, B. E.

, Hallas, K., Drahota, A. K. and Evans, S. L.

2020. A comparison of floor surfaces for injury prevention in care settings: impact forces and horizontal pulling force required to move wheeled equipment. Osteoporosis International 31 , pp. 2383-2394. 10.1007/s00198-020-05520-y

Pascoe, M. J.

, Robertson, A.

, Crayford, A.

, Durand, E.

, Steer, J.

, Castelli, A., Wesgate, R., Evans, S. L.

, Porch, A.

and Maillard, J. -Y.

2020. Dry heat and microwave generated steam protocols for the rapid decontamination of respiratory personal protective equipment in response to COVID-19-related shortages. Journal of Hospital Infection 106 (1) , pp. 10-19. 10.1016/j.jhin.2020.07.008

Al-Saffar, Ali A. and Evans, Sam L.

2020. Effect of gap outside contact area on lubrication of metal-on-metal total hip replacement. Computer Methods in Biomechanics and Biomedical Engineering 23 (11) , pp. 675-689. 10.1080/10255842.2020.1758679

Han, Quanquan, Gu, Yuchen, Setchi, Rossitza

, Lacan, Franck

, Johnston, Richard, Evans, Sam L.

and Yang, Shoufeng 2019. Additive manufacturing of high-strength crack-free Ni-based Hastelloy X superalloy. Additive Manufacturing 30 , 100919. 10.1016/j.addma.2019.100919

Braxton, Thomas M., Sarpong, Dionne Ea, Dovey, Janine L, Guillou, Anne, Evans, Ba

, Castellano, Juan M., Keenan, Bethany E.

, Baraghithy, Saja, Evans, Sam L.

, Tena-Sempere, Manuel, Mollard, Patrice, Tam, Joseph and Wells, Timothy

2019. Thermoneutrality improves skeletal impairment in adult Prader-Willi syndrome mice. Journal of Endocrinology 243 (3) , pp. 175-186. 10.1530/JOE-19-0279

Keenan, B. E.

and Evans, Samuel

2019. Biomechanical testing of hip protectors following the Canadian Standards Association express document. Osteoporosis International 10.1007/s00198-019-04914-x

Sshrama, Kadhum, Al-Jumaili, Safaa Kh, Pullin, Rhys

and Evans, Samuel

2019. On the use of acoustic emission and digital image correlation for welded joints damage characterization. Journal of Applied and Computational Mechanics 5 (2) , pp. 381-389. 10.22055/JACM.2018.25941.1301

Wyatt, Hayley, Safar, Alexander, Clarke, Alastair

, Evans, Samuel

and Mihai, L. Angela

2019. Nonlinear scaling effects in the stiffness of soft cellular structures. Royal Society Open Science 6 (1) , 181361.

Lewis, Owen, Woolley, Max, Johnson, David E., Fletcher, Julia, Fenech, Johnathan, Pietrzyk, Mariusz W., Barua, Neil U., Bienemann, Alison S., Singleton, Will, Evans, Sam L.

and Gill, Steven S. 2018. Maximising coverage of brain structures using controlled reflux, convection-enhanced delivery and the recessed step catheter. Journal of Neuroscience Methods 308 , pp. 337-345. 10.1016/j.jneumeth.2018.08.029

Han, Quanquan, Mertens, Raya, Montero-Sistiaga, Maria L., Yang, Shoufeng, Setchi, Rossitza

, Vanmeensel, Kim, Van Hooreweder, Brecht, Evans, Samuel L.

and Fan, Haiyang 2018. Laser powder bed fusion of Hastelloy X: effects of hot isostatic pressing and the hot cracking mechanism. Materials Science and Engineering: A 732 , pp. 228-239. 10.1016/j.msea.2018.07.008

Melling, Genevieve

, Colombo, John S., Avery, Steven, Nishio Ayre, Wayne

, Waddington, Rachel and Sloan, Alastair

2018. Liposomal delivery of demineralised dentine matrix for dental tissue regeneration. Journal of Tissue Engineering 24 (13-14) , pp. 1057-1065. 10.1089/ten.TEA.2017.0419

Pechon, Pierre H. M., Pullin, Rhys

, Eaton, Mark J.

, Jones, Stephan A. and Evans, Sam

2018. Acoustic emission technology can warn of impending iatrogenic femur fracture during femoral canal preparation for uncemented hip replacement. A cadaveric animal bone study. Journal of Medical Engineering and Technology 48 (2) , pp. 72-87. 10.1080/03091902.2017.1411986

Walden, Steven, Mulville, Jacqueline

, Rowlands, Jeffrey and Evans, Samuel

2018. An analysis of systematic elemental changes in decomposing bone. Journal of Forensic Sciences 63 (1) , pp. 207-213. 10.1111/1556-4029.13480

Albaaji, Amar J.

, Castle, Elinor G., Reece, Mike J., Hall, Jeremy

2018. Influence of spark plasma sintering parameters on magnetic properties of FeCo alloy. Aip Advances 8 (4) , 047705. 10.1063/1.4993529

Albaaji, Amar J.

, Castle, Elinor G., Reece, Mike J., Hall, Jeremy P.

and Evans, Sam L.

2017. Enhancement in the elongation, yield strength and magnetic properties of intermetallic FeCo alloy using spark plasma sintering. Journal of Materials Science 52 , pp. 13284-13295. 10.1007/s10853-017-1435-5

Han, Quanquan, Geng, Yanquan, Setchi, Rossitza

, Lacan, Franck

, Gu, Dongdong and Evans, Sam L.

2017. Macro and nanoscale wear behaviour of Al-Al 2 O 3 nanocomposites fabricated by selective laser melting. Composites Part B: Engineering 127 , pp. 26-35. 10.1016/j.compositesb.2017.06.026

Han, Quanquan, Setchi, Rossitza

, Lacan, Franck

, Gu, Dongdong and Evans, Samuel L.

2017. Selective laser melting of advanced Al-Al 2 O 3 nanocomposites: simulation, microstructure and mechanical properties. Materials Science and Engineering: A 698 , pp. 162-173. 10.1016/j.msea.2017.05.061

Albaaji, Amar J.

, Castle, Elinor G., Reece, Mike J., Hall, Jeremy P.

and Evans, Samuel L.

2017. Effect of ball-milling time on mechanical and magnetic properties of carbon nanotube reinforced FeCo alloy composites. Materials & Design 122 , pp. 296-306. 10.1016/j.matdes.2017.02.091

Holford, Karen M.

, Eaton, Mark J.

, Hensman, James J., Pullin, Rhys

, Dervilis, Nikolaos and Worden, Keith 2017. A new methodology for automating acoustic emission detection of metallic fatigue fractures in highly demanding aerospace environments: An overview. Progress in Aerospace Sciences 90 , pp. 1-11. 10.1016/j.paerosci.2016.11.003

Han, Quanquan, Setchi, Rossitza

2017. Characterisation and milling time optimisation of nanocrystalline aluminium powder for selective laser melting. International Journal of Advanced Manufacturing Technology 88 (5) , pp. 1429-1438. 10.1007/s00170-016-8866-z

Anssari-Benam, Afshin, Bucchi, Andrea, Screen, Hazel R. C. and Evans, Sam L.

2017. A transverse isotropic viscoelastic constitutive model for aortic valve tissue. Royal Society Open Science 4 (1) , 160585. 10.1098/rsos.160585

Pullin, Rhys

, Wright, Bryan J., Kapur, Richard, McCrory, John, Pearson, Matthew R.

and Crivelli, Davide

2017. Feasibility of detecting orthopaedic screw overtightening using acoustic emission. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 231 (3) , pp. 213-221. 10.1177/0954411916689112

Scott, C. E. H., Eaton, M. J.

, Nutton, R. W., Wade, F. A., Evans, S. L.

and Pankaj, P. 2017. Metal-backed versus all-polyethylene unicompartmental knee arthroplasty. Bone and Joint Research 6 (1) , pp. 22-30. 10.1302/2046-3758.61.BJR-2016-0142.R1

Walden, Steven J, Evans, Samuel L

and Mulville, Jacqueline

2017. Changes in Vickers hardness during the decomposition of bone: possibilities for forensic anthropology. Journal of the Mechanical Behaviour of Biomedical Materials 65 , pp. 672-678. 10.1016/j.jmbbm.2016.09.037

Wyatt, Hayley L., Clarke, Alastair

and Mihai, Loredana Angela

2017. Optical strain measurement techniques for soft cellular structures. Presented at: BSSM 12th International Conference on Advances in Experimental Mechanics, Sheffield, UK, 29 - 31 August 2017.

Griffiths, Dewi, Clarke, Alastair

, Evans, Henry

, Evans, Samuel

and Pullin, Rhys

2017. Investigating the mechanical properties of case carburised steels. Presented at: BSS 12th International Conference on Advances in Experimental Mechanics, Sheffield, UK, 29 - 31 August 2017.
Item availability restricted.

Teoh, Kar. H., Von Ruhland, Christopher, Evans, Samuel Lewin

, James, S. H., Jones, A., Howes, J., Davies, P. R. and Ahuja, S. 2016. Metallosis following implantation of magnetically controlled growing rods in the treatment of scoliosis: a case series. The Bone & Joint Journal 98-B (12) , pp. 1662-1667. 10.1302/0301-620X.98B12.38061

Nishio Ayre, Wayne

, Birchall, James C.

, Evans, Samuel L.

and Denyer, Stephen P. 2016. A novel liposomal drug delivery system for PMMA bone cements. Journal of Biomedical Materials Research Part B: Applied Biomaterials 104 (8) , pp. 1510-1524. 10.1002/jbm.b.33488

Albaaji, Amar

, Castle, Elinor G., Reece, Mike J., Hall, Jeremy Peter

2016. Mechanical and magnetic properties of spark plasma sintered soft magnetic FeCo alloy reinforced by carbon nanotubes. Journal of Materials Research 31 (21) , 3448 -3458. 10.1557/jmr.2016.372

Han, Quanquan, Setchi, Rossitza

2016. Synthesis and characterisation of advanced ball-milled Al-Al2O3 nanocomposites for selective laser melting. Powder Technology 297 , pp. 183-192. 10.1016/j.powtec.2016.04.015

Albaaji, Amar J.

, Castle, Elinor G., Reece, Mike J., Hall, Jeremy P.

and Evans, Sam L.

2016. Synthesis and properties of graphene and graphene/carbon nanotube-reinforced soft magnetic FeCo alloy composites by spark plasma sintering. Journal of Materials Science 51 (16) , pp. 7624-7635. 10.1007/s10853-016-0041-2

Han, Quanquan, Setchi, Rossitza

and Qiu, Chunlei

2016. Three-dimensional finite element thermal analysis in selective laser melting of Al-Al2O3 powder. Presented at: The 27th Annual International Solid Freeform Fabrication Symposium - An Additive Manufacturing Conference, Austin, Texas, USA, 8-10 August 2016.

Wyatt, Hayley Louise, Pullin, Rhys

, Yang, Tuoxin H. J. and Evans, Samuel Lewin

2016. Deformation during the electrosurgical vessel sealing process. Strain 52 , pp. 372-379. 10.1111/str.12197

Navein, Alice E., Cooke, Esther J., Davies, Jennifer R., Smith, Terence G., Wells, Lois H. M.

, Ohazama, Atsushi, Healy, Christopher, Sharpe, Paul T., Evans, Sam L.

, Evans, Bronwen A. J.

, Votruba, Marcela

and Wells, Timothy

2016. Disrupted mitochondrial function in the Opa3L122P mouse model for Costeff Syndrome impairs skeletal integrity. Human Molecular Genetics 25 (12) , pp. 2404-2416. 10.1093/hmg/ddw107

Wyatt, Hayley Louise, Alayyash, Khulud, Evans, Samuel Lewin

and Mihai, Loredana Angela

2016. Computer modelling of cellular structures under uniaxial loading. Presented at: 24th Conference of the UK Association on Computational Mechanics, Cardiff University, Cardiff, UK, 31 March - 1 April 2016. Cardiff: pp. 184-187.

Wyatt, Hayley Louise, Richards, Rosie, Pullin, Rhys

, Yang, T. H. Jimmy, Blain, Emma Jane

and Evans, Samuel

2016. Variation in electrosurgical vessel seal quality along the length of a porcine carotid artery. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 230 (3) , pp. 169-174. 10.1177/0954411915621092

Lewis, Owen, Woolley, Max, Johnson, David, Rosser, Anne Elizabeth

, Barua, Neil U., Bienemann, Alison S., Gill, Steven S. and Evans, Samuel Lewin

2016. Chronic, intermittent convection-enhanced delivery devices. Journal of Neuroscience Methods 259 , pp. 47-56. 10.1016/j.jneumeth.2015.11.008

Abid, Rabia, Haddad, Abderrahmane

, Cole, M., Griffiths, Huw, Clark, David

, Stone, Christopher and Evans, Samuel Lewin

2015. Mechanisms of damage propagation in carbon composites under high impulse current magnitudes. Presented at: 50th International Universities Power Engineering Conference (UPEC), Stoke-on-Trent, UK, 1-4 September 2015. Power Engineering Conference (UPEC), 2015 50th International Universities. p. 1. 10.1109/UPEC.2015.7339853

Clarke, Alastair

, Gay, Russell, Evans, Henry

, Karras, Konstantinos, Colton, Michael, Bell, Andrew, Pullin, Rhys

and Evans, Samuel

2015. Wear testing of aerospace self-lubricating bearing liner materials [Abstract]. Presented at: 42nd Leeds-Lyon Symposium on Tribology, Lyon, France, 7-9 September 2015. Proceedings of the 42nd Leeds-Lyon Symposium on Tribology. Lyon: p. 1.

Shrama, Kadhum, Pullin, Rhys

and Evans, Samuel

2015. Fatigue crack monitoring in mild steel specimens using acoustic emission and digital image correlation. Insight - Non Destructive Testing and Condition Monitoring 57 (6) , pp. 346-354. 10.1784/insi.2015.57.6.346

Genovese, Katia, Montes, Areli, Martínez, Amalia and Evans, Sam L.

2015. Full-surface deformation measurement of anisotropic tissues under indentation. Medical Engineering and Physics 37 (5) , pp. 484-493. 10.1016/j.medengphy.2015.03.005

Loizidou, Eriketi Z., Williams, Nicholas A., Barrow, David A.

, Eaton, Mark J.

, McCrory, John, Evans, Sam L.

and Allender, Chris J. 2015. Structural characterisation and transdermal delivery studies on sugar microneedles: Experimental and finite element modelling analyses. European Journal of Pharmaceutics and Biopharmaceutics 89 , pp. 224-231. 10.1016/j.ejpb.2014.11.023

Pearson, Paul Nicholas

and Evans, James 2015. Effect of diagenetic recrystallization on the strength of planktonic foraminifer tests under compression. Journal of Micropalaeontology 34 (1) , pp. 59-64. 10.1144/jmpaleo2013-032

Clarke, Alastair

, Evans, Henry Peredur

, Colton, Michael, Bell, Andrew and Gay, Russell 2015. A simultaneous testing facility for aerospace self-lubricated bearing liner materials. Presented at: STLE 70th Annual Meeting and Exhibition, Dallas, Texas, USA, 17-21 May 2015. pp. 206-224.

Vazquez, Marisol, Evans, Bronwen A. J.

, Riccardi, Daniela

, Ralphs, Jim R.

, Dillingham, Christopher Mark and Mason, Deborah J.

2014. A new method to investigate how mechanical loading of osteocytes controls osteoblasts. Frontiers in Endocrinology 5 , 208. 10.3389/fendo.2014.00208

Green, Robert N., Donaldson, Oliver W., Dafydd, Meilyr, Evans, Samuel Lewin

and Kulkarni, Rohit 2014. Biomechanical study: determining the optimum insertion angle for screw-in suture anchors - is Deadman's Angle correct? Arthroscopy: The Journal of Arthroscopic & Related Surgery 30 (12) , pp. 1535-1539. 10.1016/j.arthro.2014.07.010

Preedy, Emily Callard, Brousseau, Emmanuel Bruno Jean Paul

, Perni, Stefano and Prokopovich, Polina

2014. Adhesive forces and surface properties of cold gas plasma treated UHMWPE. Colloids and Surfaces A: Physicochemical and Engineering Aspects 460 , pp. 83-89. 10.1016/j.colsurfa.2014.03.052

Mani, Mahesh Kumar, Viola, Giuseppe, Reece, Mike J., Hall, Jeremy Peter

2014. Improvement of interfacial bonding in carbon nanotube reinforced Fe-50Co composites by Ni-P coating: Effect on magnetic and mechanical properties. Materials Science and Engineering: B 188 , pp. 94-101. 10.1016/j.mseb.2014.06.009

Shrama, Kadhum, Clarke, Alastair

2014. Detection of cracking in mild steel fatigue specimens using acoustic emission and digital image correlation. Presented at: 32st Conference of the European Working Group on Acoustic Emission, Dresden, Germany, 3 -5 September 2014. Proceedings of 31st Conference of the European Working Group on Acoustic Emission (EWGAE).

Mani, Mahesh Kumar, Viola, Giuseppe, Reece, Mike J., Hall, Jeremy Peter

2014. Fabrication of carbon nanotube reinforced iron based magnetic alloy composites by spark plasma sintering. Journal of Alloys and Compounds 601 , pp. 146-153. 10.1016/j.jallcom.2014.02.169

Nishio Ayre, Wayne

, Denyer, Stephen P. and Evans, Samuel L.

2014. Ageing and moisture uptake in polymethyl methacrylate (PMMA) bone cements. Journal of the Mechanical Behavior of Biomedical Materials 32 , pp. 76-88. 10.1016/j.jmbbm.2013.12.010

Mani, Mahesh Kumar, Viola, Giuseppe, Reece, Mike J., Hall, Jeremy Peter

2014. Mechanical and magnetic characterisation of SiC whisker reinforced Fe-Co alloy composites. Materials Science and Engineering A 592 , pp. 19-27. 10.1016/j.msea.2013.10.099

Mani, Mahesh Kumar, Viola, Giuseppe, Reece, Mike J., Hall, Jeremy Peter

2013. Influence of coated SiC particulates on the mechanical and magnetic behaviour of Fe-Co alloy composites. Journal of Materials Science 49 (6) , pp. 2578-2587. 10.1007/s10853-013-7954-9

Scott, C. E. H., Eaton, Mark Jonathan

, Nutton, R. W., Wade, F. A., Pankaj, P. and Evans, Samuel Lewin

2013. Proximal tibial strain in medial unicompartmental knee replacements: A biomechanical study of implant design. The Bone & Joint Journal 95-B (10) , pp. 1339-1347. 10.1302/0301-620X.95B10.31644

Craik, Jonathan D., Laffer, Caroline H. L., Richards, Simon W., Walsh, Sean P. and Evans, Samuel Lewin

2013. Distal humerus cortical strains following total elbow arthroplasty. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 227 (2) , pp. 120-128. 10.1177/0954411912463321

Groves, Rachel Beth, Coulman, Sion

, Birchall, James Caradoc

2013. An anisotropic, hyperelastic model for skin: experimental measurements, finite element modelling and identification of parameters for human and murine skin. Journal of the Mechanical Behaviour of Biomedical Materials 18 , pp. 167-180. 10.1016/j.jmbbm.2012.10.021

Hales, Tristram

, Cole-Hawthorne, Clara, Lovell, Laurence and Evans, Samuel Lewin

2013. Assessing the accuracy of simple field based root strength measurements. Plant and Soil 372 (1-2) , pp. 553-565. 10.1007/s11104-013-1765-2

Mani, Mahesh Kumar, Viola, Giuseppe, Reece, Mike J., Hall, Jeremy Peter

2013. Structural and magnetic characterization of spark plasma sintered Fe-50Co alloys. MRS Proceedings 1516 , pp. 201-207. 10.1557/opl.2012.1669

Vazquez, Marisol, Evans, Bronwen Alice James

, Ralphs, James Robert, Riccardi, Daniela and Mason, Deborah Jane 2012. In vitro 3D osteoblast-osteocyte co-culture mechanical loading model [Abstract]. Osteoporosis International 23 (Supp 5) , S560-S561. 10.1007/s00198-012-2005-y

Groves, Rachel Beth, Coulman, Sion

, Birchall, James Caradoc

2012. Quantifying the mechanical properties of human skin to optimise future microneedle device design. Computer Methods in Biomechanics and Biomedical Engineering 15 (1) , pp. 73-82. 10.1080/10255842.2011.596481

Pechon, P., Pullin, Rhys

2012. A novel sensor technology may be used to predict impending iatrogenic femur fracture during uncemented hip arthroplasty in real time. Original laboratory research using deer femora [Abstract]. Orthopaedic Proceedings : a supplement of Journal of Bone and Joint Surgery (British) 94-B (SXVIII) , p. 52.

Ayre, Wayne Nishio

2012. Fatigue crack propagation in poly (methyl methacrylate) bone cement under different loading frequencies and stress intensities [Abstract]. Orthopaedic Proceedings: a supplement of Journal of Bone and Joint Surgery (British) 94-B (SXVIII) , p. 63.

Mahmud, Jamaluddin, Holt, Catherine Avril

, Manan, Nor Fazli Adull and Chizari, Mahmoud 2012. A parametric study and simulations in quantifying human skin hyperelastic parameters. Procedia Engineering 41 (1) , pp. 1580-1586. 10.1016/j.proeng.2012.07.353

Khan, Ilyas Mahmood, Evans, Samuel Lewin

, Young, Robert David

, Blain, Emma Jane

, Quantock, Andrew James

, Avery, Nick and Archer, Charles William 2011. Fibroblast growth factor 2 and transforming growth factor β1 induce precocious maturation of articular cartilage. Arthritis & Rheumatism 63 (11) , pp. 3417-3427. 10.1002/art.30543

Hensman, J., Worden, K., Eaton, Mark Jonathan

2011. Spatial scanning for anomaly detection in acoustic emission testing of an aerospace structure. Mechanical Systems and Signal Processing 25 (7) , pp. 2462-2474. 10.1016/j.ymssp.2011.02.016

Wyatt, Hayley Louise, Richards, R., Evans, Samuel Lewin

, Blain, Emma Jane

and Yang, T. 2011. Relationship of tissue composition on arterial tissue adhesion strength. Presented at: 24th European Conference on Biomaterials ESB2011, Dublin, Ireland, 4-9 September 2011.

Howard, A., McLauchlan, G., Richards, J. and Evans, Samuel Lewin

2011. Does the diameter of the intramedullary nail really matter? Presented at: 12th EFORT Congress, Copenhagen, Denmark, 1-4 June 2011.

Eaton, Mark Jonathan

, Hensman, J. J., Holford, Karen Margaret

, Worden, K. and Evans, Samuel Lewin

2011. Principal component analysis of acoustic emission signals from landing gear components: an aid to fatigue fracture detection. Strain 47 (Supp.1) , e588-e594. 10.1111/j.1475-1305.2009.00661.x

Mahmud, J., Holt, Catherine Avril

2011. A parametric study to investigate skin prestretch. Presented at: IEEE Symposium on Computer and Informatics (ISCI 2011), Kuala Lumpur, Malaysia,

Groves, Rachel Beth, Coulman, Sion

, Birchall, James Caradoc

2011. Using inverse finite element modeling to identify the anisotropic mechanical properties of human and mouse skin in tension. Presented at: International Conference on the Mechanics of Biomaterials and Tissues, Hawaii, USA, 11-15 December 2011.

Tayton, E., Evans, Samuel Lewin

and O'Doherty, Daphne Maria 2010. Mapping the strain distribution on the proximal femur with titanium and flexible-stemmed implants using digital image correlation. Journal of Bone and Joint Surgery - British Volume 92-B (8) , pp. 1176-1181. 10.1302/0301-620X.92B8.23553

Whatling, Gemma Marie

2010. Introducing a new staircase design to quantify healthy knee function during stair ascent and descent. Computer Methods in Biomechanics and Biomedical Engineering 13 (3) , pp. 371-378. 10.1080/10255840903251296

Persson, C., Evans, Samuel Lewin

, Marsh, Rainy, Summers, J. L. and Hall, R. M. 2010. Poisson's ratio and strain rate dependency of the constitutive behavior of spinal dura mater. Annals of Biomedical Engineering 38 (3) , pp. 975-983. 10.1007/s10439-010-9924-6

Cameron, I. D., Robinovitch, S. N., Birge, S., Kannus, P., Khan, K., Lauritzen, J., Howland, J., Evans, Samuel Lewin

, Minns, J., Laing, A C, Cripton, P.A., Derler, S., Plant, D. and Kiel, D.P. 2010. Hip protectors: recommendations for clinical trials - an international consensus statement (part II). Osteoporosis International 21 (1) , 01-10. 10.1007/s00198-009-1055-2

Evans, Samuel Lewin

2010. Effects of intermittent overloads on fatigue of PMMA bone cement. International Journal of Nano and Biomaterials 3 (1) , pp. 65-77. 10.1504/IJNBM.2010.036108

Featherston, Carol Ann

and Cole, Matthew 2010. Development of a Methodology to Assess Mechanical Impulse Effects Resulting from Lightning Attachment to Lightweight Aircraft Structures. Applied Mechanics and Materials 24-25 , pp. 129-134. 10.4028/www.scientific.net/AMM.24-25.129

Ramaswamya, R., Evans, Samuel Lewin

and Kosashvili, Y. 2010. Holding power of variable pitch screws in osteoporotic, osteopenic and normal bone: Are all screws created equal? Injury 41 (2) , pp. 179-183. 10.1016/j.injury.2009.08.015

Whitehouse, M. R. and Evans, Samuel Lewin

2010. Bone cement: An overview. International Journal of Nano and Biomaterials 3 (1) , pp. 4-19. 10.1504/IJNBM.2010.036104

Lovern, B., Stroud, L. A., Ferran, N .A., Evans, Samuel Lewin

, Evans, R. O. and Holt, Catherine Avril

2010. Motion analysis of the glenohumeral joint during activities of daily living. International Journal of Computer Methods in Biomechanics and Biomedical Engineering 13 (6) , pp. 803-809. 10.1080/10255841003630637

Mahmud, J., Holt, Catherine Avril

2010. An innovative application of a small-scale motion analysis technique to quantify human skin deformation in vivo. Journal of Biomechanics 43 (5) , pp. 1002-1006. 10.1016/jbiomech.2009.11.009

Pullin, Rhys

and McCory, J. P. 2010. Detection of cracking in gear teeth using Acoustic Emission. Applied Mechanics and Materials 24-25 , pp. 45-50. 10.4028/www.scientific.net/AMM.24-25.45

Khurana, A., Byrne, Carlton Barrie Baylis, Evans, Samuel Lewin

, Tanaka, H. and Haraharan, K. 2010. Comparison of transverse wires and half pins in Taylor Spatial Frame: A biomechanical study. Journal of Orthopaedic Surgery and Research 5 (1) , 23. 10.1186/1749-799X-5-23

Cheung, W., Mahmud, J., Evans, Samuel Lewin

, Wang, B. and Chizari, M. 2010. Evaluating the mechanical properties of tendon graft using digital image correlation (DIC) techniques [Abstract]. Journal of Biomechanics 43 (S1) , S63.

Evans, Samuel Lewin

2010. The effect of the soft tissues on bone loading during hip fractures. Presented at: 9th International Symposium Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain, 24-27 February 2010. Published in: Middleton, John ed. 9th International Symposium Computer Methods in Biomechanics and Biomedical Engineering 2010, Valencia, Spain, 24-27 February 2010. Solihull: ARUP,

Groves, R. B., Evans, Samuel Lewin

, Coulman, S. and BircHall, Jeremy Peter 2010. Mechanics of skin penetration by microneedles. Presented at: Proceedings of the 8th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Mahmud, J., Holt, Catherine Avril

2010. Measuring skin strain distribution in vivo using motion capture and finite elements. Presented at: 9th International Conference on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Moerman, K. M., Sprengers, A. M. J., Nederveen, A. J., Holt, Catherine Avril

, Lally, C. and Simms, C. K. 2010. Non-invasive imaging and inverse finite element analysis for the determination of the mechanical properties of soft tissue. Presented at: 9th International Conference on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Ozturk, H., B., Nair P., T., Bah M., Evans, Samuel Lewin

, Jones, A. M. H. and Browne, M. 2010. Computational and experimental assessment of primary stability of a cementless total hip replacement: The effect of the stem positioning. Presented at: Proceedings of the 9th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Li, J., Evans, Samuel Lewin

, Blain, E., Piccinelli, S., Holt, Catherine Avril

, Dini, D. and Accardi, M. 2010. Experimental methods for validating articular cartilage swelling models. Presented at: British Orthopaedic Research Society Annual Meeting, Cardiff, UK, 12-13 July 2010. Proceedings of the British Orthopaedic Research Society Conference (Cardiff, UK).

Li, J., Piccinelli, S., Holt, Catherine Avril

, Blain, E., Dini, D. and Accardi, M. 2010. Numerical modeling of articular cartilage mechanical behaviour. Presented at: 9th International Conference on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Stroud, Lindsay Ann, Lovern, B., Evans, R., Evans, Samuel Lewin

2010. Estimating the glenohumeral joint centre of rotation: regression equations versus helical axis. Presented at: 9th International Conference on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Stroud, Lindsay Ann, Lovern, B., Evans, Samuel Lewin

2010. Investigating the use of digital image correlation to quantify scapula function. Presented at: 9th International Conference on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Stroud, Lindsay Ann, Lovern, B. J., Ferran, N., Evans, R., Evans, Samuel Lewin

2010. Quantifying glenohumeral joint translation in multidirectional instability patients and healthy volunteers. Presented at: Proceedings of the European Society of Biomechanics 17th Congress, Edinburgh, UK,

Watling, Daniel, Whatling, Gemma Marie

2010. Comparison of objective classification and subjective waveform analysis for the knee during level gait. Presented at: 9th International Conference on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Everitt, Holly, Evans, Samuel Lewin

, Bigsby, Rob and Khan, Imran 2010. Acetabular component deformation under rim loading using digital image correlation and finite element methods. Presented at: 7th International Conference on Advances in Experimental Mechanics, Liverpool, UK, 7-9 September 2010. Published in: Mines, R. A. W. and Dulieu-Barton, J. M. eds. Advances in Experimental Mechanics VII. Applied Mechanics and Materials. Applied mechanics and materials , vol.24-25 (24-25) Stafa-Zurich: Trans Tech Publications, pp. 275-280. 10.4028/www.scientific.net/AMM.24-25.275

Evans, Samuel Lewin

2010. Errors and uncertainties in the indentation testing of soft tissues. Presented at: International Conference on the Mechanics of Biomaterials and Tissues, Hawaii, USA, 11-15 December 2011.

Pullin, Rhys

, Hensman, J. J., Holford, Karen Margaret

, Worden, K. and Evans, Samuel Lewin

2010. Validation of acoustic emission (AE) crack detection in aerospace grade steels using Digital Image Correlation (DIC). Presented at: 7th BSSM International Conference on Advances in Experimental Mechanics, Liverpool, UK, 7 - 9 September 2010. Published in: Mines, R. A. W. and Dulieu-Barton, J. M. eds. Advances in Experimental Mechanics. Applied Mechanics and Materials (24-25) Zurich: Trans Tech Publications, pp. 221-226. 10.4028/www.scientific.net/AMM.24-25.221

Pullin, Rhys

and McCrory, John 2010. Detection of cracking in gear teeth using acoustic emission. Presented at: 7th BSSM International Conference on Advances in Experimental Mechanics, Liverpool, UK, 7-9 September 2010.

Featherston, Carol Ann

and Cole, Matthew 2010. Development of a methodology to assess mechanical impulse effects resulting from lightning attachment to lightweight aircraft structure. Presented at: 7th BSSM International Conference on Advances in Experimental Mechanics, Liverpool, UK, 7 - 9 September.

Whatling, Gemma Marie

2009. Comparing different data collection and analysis techniques for quantifying healthy knee joint function during stair ascent and descent. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 223 (8) , pp. 981-990. 10.1243/09544119JEIM648

Zhurov, Alexei I.

, Evans, Samuel L.

, Holt, Catherine A.

and Middleton, John 2009. A nonlinear compressible transversely-isotropic viscohyperelastic constitutive model of the periodontal ligament. Presented at: ASME International Mechanical Engineering Congress and Exposition 2008, Boston, MA, USA, 31 October-6 November 2008. Published in: Lovern, B. and Evans, R. eds. ASME International Mechanical Engineering Congress and Exposition: Volume 2: Biomedical and Biotechnology Engineering. , vol.2 American Society of Mechanical Engineers, pp. 707-719. 10.1115/IMECE2008-67949

Evans, Samuel Lewin

2009. Measuring the mechanical properties of human skin in vivo using digital image correlation and finite element modelling. Journal of Strain Analysis for Engineering Design 44 (5) , pp. 337-345. 10.1243/03093247JSA488

Holford, Karen Margaret

, Hensman, J. and Worden, K. 2009. Acoustic emission for monitoring aircraft structures. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 223 (5) , pp. 525-532. 10.1243/09544100JAERO404

Theobald, Peter

, Jones, Michael David

and O'Doherty, Daphne Maria 2009. Medical engineering at Cardiff University. Part 1: undergraduate programmes of study. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 223 (4) , pp. 425-430. 10.1243/09544119JEIM533

Hensman, J., Pullin, Rhys

, Worden, K., Holford, Karen Margaret

2009. Detecting and Identifying Artificial Acoustic Emission Signals in an Industrial Fatigue Environment. Measurement Science and Technology 20 (4) , 045101. 10.1088/0957-0233/20/4/045101

Stevenson, A. E., Evans, Bronwen Alice James

, Gevers, E. F., Elford, Carole, McLeod, Robert William J., Perry, M. J., El-Kasti, M. M., Coschigano, K. T., Kopchick, J. J., Evans, Samuel Lewin

and Wells, Timothy

2009. Does adiposity status influence femoral cortical strength in rodent models of growth hormone deficiency? American Journal of Physiology - Endocrinology and Metabolism 296 (1) , E147-E156. 10.1152/ajpendo.90689.2008

Eaton, Mark Jonathan

, Featherston, Carol Ann

and Rose, A 2009. Use of Macro Fibre Composite Transducers as Acoustic Emmission Sensors. Remote Sensing 1 (2) , pp. 68-79. 10.3390/rs1020068

Evans, Samuel Lewin

2009. On the implementation of a wrinkling, hyperelastic membrane model for skin and other materials. Computer Methods in Biomechanics and Biomedical Engineering 12 (3) , pp. 319-332. 10.1080/10255840802546762

Moerman, K M, Holt, Catherine Avril

and Simms, C K 2009. Digital image correlation and finite element modelling as a method to determine mechanical properties of human soft tissue in vivo. Journal of Biomechanics 42 (8) , pp. 1150-1153. 10.1016/j.jbiomech.2009.02.016

Screen, HRC and Evans, Samuel Lewin

2009. Measuring Strain Distributions in Tendon using Confocal Microscopy and Finite Elements. Journal of Strain Analysis for Engineering Design 44 (5) , pp. 327-335. 10.1243/03093247JSA491

Subramanian, K. N., Temple, A. J., Evans, Samuel Lewin

and John, A. 2009. Pull-out strength of a polished tapered stem is improved by placing bone cement over the shoulder of the implant. Journal of Arthroplasty 24 (1) , pp. 139-143. 10.1016/j.arth.2008.05.029

Theobald, Peter

, O'Doherty, Daphne Maria, Holt, Catherine Avril

and Jones, Michael David

2009. Medical engineering at Cardiff University. Part 2: postgraduate programmes of study. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 223 (4) , pp. 431-435. 10.1243/09544119JEIM534

Acharya, A.V. and Evans, Samuel Lewin

2009. Does placing screws off-centre in tubular bone alter their pullout strength? Injury 40 (11) , 1161 -1166. 10.1016/j.injury.2009.02.008

Robinovitch, S. N., Evans, Samuel Lewin

, Minns, J., Laing, A. C., Kannus, P., Cripton, P. A., Derler, S., Birge, S. J., Plant, D., Cameron, I., Kiel, D. P., Howland, J., Khan, K. and Lauritzen, J. B. 2009. Hip protectors: recommendations for biomechanical testing - an international consensus statement. Osteoporosis International 20 (12) , pp. 1977-1988. 10.1007/s00198-009-1045-4

Lovern, B., Stroud, L. A., Evans, R. O., Evans, Samuel Lewin

2009. Dynamic tracking of the scapula using Skin-mounted markers. Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine 223 (7) , pp. 823-831. 10.1243/09544119JEIM554

Dawoodi, A. and Evans, Samuel Lewin

2009. Effect of monomer to polymer ratio and initiator/activator ratios on mechanical and thermal characterisations of acrylic bone cement. Presented at: European Society for Biomaterials, Lausanne, Switzerland,

Evans, Samuel Lewin

and Gaudilliere, G. 2009. The role of soft tissues in hip fractures. Presented at: 3rd International Conference on Mechanics of Biomaterials and Tissues, Clearwater Beach, USA,

Ferran, N. A., Manoj-Thomas, A., Shrama, A., Evans, Samuel Lewin

and Thomas, D. P. 2009. Factors affecting pull-out strength of cannulated cancellous bone screws. Presented at: 10th European Federation of National Associations of Orthodpedics and Traumatology (EFORT)Congress, Vienna, Austria,

Groves, R. B., Evans, Samuel Lewin

, Coulman, S. and BircHall, Jeremy Peter 2009. Mechanics of skin penetration by microneedles. Presented at: Third International Conference on Mechanics of Biomaterials and Tissues, Clearwater, USA,

Mahmud, J., Evans, Samuel Lewin

2009. Measuring skin deformation in-vivo using a motion capture system. Presented at: 3rd International Conference on Mechanics of Biomaterials & Tissues, Clearwater Beach, USA,

Mahmud, J., Evans, Samuel Lewin

2009. Using motion capture and analysis to explore the mechanical properties of human skin in-vivo. Presented at: IMechE Measurement and Sensing in Medicine and Health: Capturing Motion and Musculoskeletal Dynamics, London, UK, pp. 43-48.

Oturk, H., Jones, A. M. H., Evans, Samuel Lewin

, B., Nair P. and Browne, M. 2009. Experimental and finite element corroboration of the mechanical behavior of a cementless hip replacement. Presented at: 22nd Annual Conference for the International Society for Technology in Arthroplasty, Hawaii, USA,

Kempshall, P., Jemmett, P., Evans, Samuel Lewin

, Davies, P., Jones, D. A., Howes, J. and Ahuja, S. 2009. Accuracy of Jerome halo pin self-limiting torque screw drivers. Presented at: British Association of Spine Surgeons & British Cervical. Spine Society (combined annual meeting), Sheffield, UK,

Liu, H., Zhao, Y., Evans, Samuel Lewin

2009. Applications of motion analysis system measuring micro-movements in three-dimensional space: Resolution accuracy and reliability of the optical motion capture system. Presented at: 3rd International Conference on Bioinformatics and Biomedical Engineering iCBBE 2009, Beijing, China, 11-16 June 2009. 3rd International Conference Bioinformatics and Biomedical Engineering (iCBBE 2009), Beijing, China. (516240) IEEE, pp. 2815-2818. 10.1109/ICBBE.2009.5162401

Lovern, B., Evans, R., Jones, L., Evans, Samuel Lewin

, Stroud, L. and Holt, Catherine Avril

2009. In vivo measurements of the shoulder complex for use in musculoskeletal modelling. Presented at: 8th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Porto, Portugal,

Lovern, B., Stroud, L., Holt, Catherine Avril

2009. Measuring scapula movement with digital image correlation. Presented at: 22nd International Society of Biomechanics Congress, Cape Town, South Africa, 5-9 July 2009. Published in: Rugelj, Darja and Sevsek, France eds. Proceedings of the XXII Congress of the International Society of Biomechanics, July 5-9, 2009, Cape Town, South Africa. Cape Town: ISB,

Screen, H. R. and Evans, Samuel Lewin

2009. Calculation of strain distributions within tissues using confocal microscope images. Presented at: 3rd International Conference on Mechanics of Biomaterials and Tissues, Clearwater Beach, USA,

Stroud, Lindsay Ann, Lovern, B., Evans, R., Jones, L., Evans, Samuel Lewin

2009. Measuring scapula orientation during arm elevation. Presented at: 8th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Porto, Portugal,

Stroud, Lindsay Ann, Lovern, B., Ferran, N., Evans, R., Evans, Samuel Lewin

2009. Measuring glenohumeral joint translations using motion analysis techniques. Presented at: Proceedings of the 23rd Congress of the International Society of Biomechanics (ISB), Cape Town, South Africa,

Whatling, Gemma Marie

, Jones, L., Evans, Samuel Lewin

, Wilson, C., Williams, R., Sharma, A. and Dent, C. 2009. Quantifying non-pathological and osteoarthritic knee function during stair walking. Presented at: 8th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering (Porto, Portugal),

Whatling, Gemma Marie

, Jones, L., Evans, Samuel Lewin

, Wilson, C., Williams, R., Dent, C. and Holt, Catherine Avril

2009. Using stair gait and an objective classifier to identify knee osteoarthritis. Presented at: 55th Annual Meeting of the Orthopaedic Research Society, Las Vegas, USA,

Lovern, Barry, Evans, R., Jones, L., Evans, Samuel Lewin

, Stroud, Lindsay Ann and Holt, Catherine Avril

2008. Functional assessment of the shoulder complex using 3D motion analysis techniques [Abstract]. Journal of Biomechanics 41 (S1) , S415. 10.1016/S0021-9290(08)70414-7

Whatling, Gemma Marie

, Jones, L., Holt, Catherine Avril

, Wilson, C., Williams, R., Sharma, A. and Dent, C. 2008. A preliminary study of stair ascent to determine indicators of advanced knee osteoarthritis [Abstract]. Journal of Biomechanics 41 (S1) , S417. 10.1016/S0021-9290(08)70416-0

Persson, C., Evans, Samuel Lewin

, Summers, J. and Hall, R. 2008. Strain rate dependency of the constitutive behaviour of dura mater [Abstract]. Journal of Biomechanics 41 (S1) , S60. 10.1016/S0021-9290(08)70060-5

Stroud, Lindsay Ann, Lovern, B., Burrows, T., Evans, R., Evans, Samuel Lewin

2008. Glenohumeral and scapular kinematics. Presented at: 2nd UK Shoulder Biomechanics Group Annual Meeting, London, UK, 22 April 2008.

Pullin, Rhys

, Hensman, J. J., Holford, Karen Margaret

, Worden, K. and Evans, Samuel Lewin

2008. A principal component analysis of acoustic emission signals from a landing gear component. Presented at: 6th International Conference on Advances in Experimental Mechanics, London, UK, 9-10 September 2008. Published in: Dulieu-Barton, J. M., Dennis Lord, J. and Greene, R. J. eds. Advances in experimental mechanics VI : selected peer reviewed papers from 6th International Conference on Advances in Experimental Mechanics, 9th-11th September 2008, National Physical Laboratory, London, UK. Trans Tech, pp. 41-47. 10.4028/www.scientific.net/AMM.13-14.41

Chaston, AM, Edwards, C, Evans, Samuel Lewin

and Holford, Karen Margaret

2008. Shear Wave Ultrasonic Coupling Performance of Different Adhesives. Insight - Non-Destructive Testing and Condition Monitoring 50 (11) , pp. 633-636. 10.1784/insi.2008.50.11.633

Hensman, JL, Pullin, Rhys

, Worden, K, Holford, Karen Margaret

2008. Detecting and Identifying Artificial Acoustic Emission Signals in an Industrial Fatigue Environment. Applied Mechanics and Materials: Advances in Experimental Mechanics VI 13-14 , pp. 251-260. 10.4028/www.scientific.net/AMM.13-14.251

Ganapthi, M., Evans, Samuel Lewin

and Roberts, P. 2008. Strain pattern following surface replacement of the hip. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 222 (1) , pp. 13-18. 10.1243/09544119JEIM322

Lovern, B., Evans, R., Jones, L., Evans, Samuel Lewin

, Stroud, L. and Holt, Catherine Avril

2008. Error evaluation of skin-marker movements in motion analysis of the shoulder complex. Presented at: Institution of Mechanical Engineers. Engineering the Upper Limb: Patient-Specific Surgical Planning and Implementation, London, UK,

Evans, Samuel Lewin

2008. Fast, reliable solution of hyperelastic finite element models. Presented at: 8th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Porto, Portugal,

Mahmud, J., Holt, Catherine Avril

2008. Small-scale motion analysis techniques for measuring skin deformation properties. Presented at: Proceedings of the International Society of Biomechanics, 3D Motion Analysis Meeting (3DMA2008), Santpoort-Amsterdam, Netherlands,

Mahmud, J., Holt, Catherine Avril

2008. A parametric study of the suction test applied to human skin. Presented at: 8th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Porto, Porto, Portugal,

Persson, C., Evans, Samuel Lewin

, Summers, J. and Hall, R. 2008. Strain rate dependency of the constitutive behaviour of dura mater. Presented at: European Society of Biomechanics, Lausanne, Switzerland,

Jones, L., Evans, Samuel Lewin

, Stroud, L. and Holt, Catherine Avril

2008. Use of passive markers vs. electromagnetic tracker and scapula locator in kinematic analysis of the shoulder complex. Presented at: International Society of Biomechanics, International Shoulder Group Meeting (ISG2008), Bologna, Italy, pp. 132-133.

Lovern, B., Evans, R., Jones, L., Evans, Samuel Lewin

, Stroud, L. and Holt, Catherine Avril

2008. Error evaluation of skin-marker movements in motion analysis of the shoulder complex. Presented at: IMechE Meeting: Engineering the Upper Limb, London, UK,

Lovern, B., Evans, R., Jones, L., Evans, Samuel Lewin

, Stroud, L. and Holt, Catherine Avril

2008. Dynamic vs. static measurements in motion analysis of the shoulder complex. Presented at: Proceedings IMechE Meeting: Engineering the Upper Limb, London, UK,

Lovern, B, Stroud, L., Feran, N., Evans, Samuel Lewin

, Evans, R. and Holt, Catherine Avril

2008. 3D motion analysis of the glenohumeral joint: a comparison of maximal vs. functional range of motion. Presented at: British Elbow and Shoulder Society (BESS2008), Liverpool, UK, 4-6 June, 2008.

Lovern, B., Stroud, L., Ferran, N. A., Evans, Samuel Lewin

, Evans, R. O. and Holt, Catherine Avril

2008. Motion analysis of the glenohumeral joint during activities of daily living. Presented at: International Society of Biomechanics, 3D Motion Analysis Meeting (3DMA2008), Santpoort, The Netherlands,

Lovern, B., Stroud, L., Mahmud, J., Marsden, S. P., Kontaxis, A., Johnson, G. R., Evans, R. O., Holt, Catherine Avril

2008. Using digital image correlation to measure scapula movement during shoulder motion. Presented at: International Society of Biomechanics, 3D Motion Analysis Meeting (3DMA2008), Amsterdam, The Netherlands,

Lovern, Barry, Evans, R., Jones, L., Evans, Samuel Lewin

, Stroud, L. A. and Holt, Catherine Avril

2008. Functional assessment of the shoulder complex using 3D motion analysis techniques. Presented at: 16th Congress of the European Society of Biomechanics, Lucerne, Switzerland, 6-9 July 2008. Proceedings of the European Society of Biomechanics conference, Lucerne , Switzerland, 6-9 July 2008.

Stroud, Lindsay Ann, Lovern, B., Jones, L., Evans, R., Evans, Samuel Lewin

2008. In vivo non-invasive measurements of scapula kinematics. Effect of bilateral arm elevation on scapula lateral rotation. Presented at: International Society of Biomechanics, 3D Motion Analysis Meeting (3DMA2008), Amsterdam Netherlands,

Stroud, Lindsay Ann, Lovern, B., Jones, L., Evans, R., Evans, Samuel Lewin

2008. Effect of bilateral arm elevation on scapula lateral rotation. Presented at: Proceedings of the International Society of Biomechanics, 3D Motion Analysis Meeting (3DMA2008), Amsterdam, The Netherlands,

Whatling, Gemma Marie

, Jones, L., Holt, Catherine Avril

, Wilson, C., Williams, R., Sharma, A. J. and Dent, C. 2008. A preliminary study of stair ascent to determine indicators of advanced knee osteoarthritis. Presented at: European Society of Biomechanics, Lucerne, Switzerland,

Lovern, B. J., Stroud, L. A., Holt, Catherine Avril

2008. Digital image correlation to assess scapula skin artefacts during shoulder motion. Presented at: 2nd UK Shoulder Biomechanics Group Meeting, London, UK, 22 April 2008.

Mansergh, Fiona Catherine, Wells, Timothy

, Elford, Carole, Evans, Samuel Lewin

, Evans, Martin John, Perry, Mark J. and Evans, Bronwen Alice James

2007. Osteopenia in Sparc (osteonectin) deficient mice: characterization of phenotypic determinants of femoral strength and changes in gene expression. Physiological genomics 32 (1) , pp. 64-73. 10.1152/physiolgenomics.00151.2007

Whatling, Gemma Marie

, Jones, L., Holt, Catherine Avril

2007. A study of stair climbing for patients with advanced knee osteoarthritis [Abstract]. Gait & Posture 26 (S1) , S117. 10.1016/S0966-6362(07)80010-5

Evans, Samuel Lewin

2007. Fatigue crack propagation under variable amplitude loading in PMMA and bone cement. Journal of Materials Science: Materials in Medicine 18 (9) , pp. 1711-1717. 10.1007/s10856-007-3021-x

Baxter, Geoff, Pullin, Rhys

2007. Delta T source location for acoustic emission. Mechanical systems and signal processing 21 (3) , pp. 1512-1520. 10.1016/j.ymssp.2006.05.003

Liu, Helen, Holt, Catherine Avril

2007. Accuracy and repeatability of an optical motion analysis system for measuring small deformations of biological tissues. Journal of Biomechanics 40 (1) , pp. 210-214. 10.1016/j.jbiomech.2005.11.007

Pullin, Rhys

, Hensman, J. J., Holford, Karen Margaret

, Worden, K. and Evans, Samuel Lewin

2007. Principal component analysis of acoustic emission signals from a landing gear component. Key Engineering Materials 347 , pp. 139-144.

Pullin, Rhys

2007. Confidence of detection of fractures using acoustic emission signals. Applied Mechanics and Materials 07-08 , pp. 147-152. 10.4028/www.scientific.net/AMM.7-8.147

Pullin, Rhys

, Theobald, P., Holford, Karen Margaret

2007. A Numerical Determination of Acoustic Emission Sensor Response in Plates Using Dispersion Curves. Key Engineering Materials 347 , pp. 381-386. 10.4028/www.scientific.net/KEM.347.381

Pullin, Rhys

, Baxter, M., Eaton, Mark Jonathan

2007. Novel acoustic emission source detection. Journal of Acoustic Emission 25 , pp. 215-223.

Evans, Samuel Lewin

2007. What activities are important in the fatigue of bone cement? Presented at: 2nd International Conference on Mechanics of Biomaterials and Tissues, Hawaii, USA,

Evans, Samuel Lewin

2007. Fatigue of PMMA bone cement (invited keynote presentation). Presented at: 2nd International Conference on Mechanics of Biomaterials and Tissues, Hawaii, USA,

Evans, Samuel Lewin

, Mahmud, J., Ozturk, H., Saidi, K. and Shrive, N.G. 2007. Measuring the mechanical properties of skin using digital image correlation and nonlinear finite element analysis. Presented at: 2nd International Conference on Mechanics of Biomaterials and Tissues, Hawaii, USA,

Evans, Samuel Lewin

, Ozturk, H., Saidi, K. and Shrive, N.G. 2007. Measuring soft tissue properties using digital image correlation and finite element modelling. Presented at: 13th International Conference on Experimental Mechanics, Alexandropolis, Greece,

Holt, Catherine Avril

, Whatling, Gemma Marie

, Jones, L. and Evans, Samuel Lewin

2007. The biomechanics of stair climbing for patients with advanced knee osteoarthritis. Presented at: 6th Combined Meeting of the Orthopaedic Research Societies (ORS), Honolulu, Hawaii, (242)

Pullin, Rhys

, Baxter, M., Eaton, Mark Jonathan

2007. Novel acoustic emission source detection. Presented at: 5th International Conference on Acoustic Emission, Lake Tahoe, USA,

Pullin, Rhys

2007. Confidence of detection of fracture signals using acoustic emission. Presented at: 5th International Conference on Advances in Experimental Mechanics, Manchester, Manchester, UK,

Pullin, Rhys

, Baxter, M. and Hensman, J. J 2007. Advanced location and characterisation of damage in complex metallic structures using acoustic emission. Presented at: 13th International Conference on Experimental Mechanics (ICEM07), Alexandroupolis, Greece,

Pullin, Rhys

, Theobald, Peter

2007. Numerical determination of acoustic emission sensor response in plates using dispersion curves. Presented at: 7th International Conference on Damage Assessment of Structures (DAMAS 2007), Turin, Italy,

Whatling, Gemma Marie

, Jones, L., Holt, Catherine Avril

2007. A study of stair climbing for patients with advanced knee osteoarthritis. Presented at: 16th Annual Meeting of ESMAC, Athens, Greece, , vol.26 Gait & Posture,

Marsh, Richard

, Griffiths, Anthony John, Williams, Keith Philip and Evans, Samuel Lewin

2006. Thermal degradation of polyethylene film materials due to successive recycling. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 220 (8) , pp. 1099-1108. 10.1243/09544062JMES178

Marsh, Richard

, Griffiths, Anthony John, Williams, Keith Philip and Evans, Samuel Lewin

2006. Degradation of recycled polyethylene film materials due to contamination encountered in the products' life cycle. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 220 (5) , pp. 593-602. 10.1243/09544062JMES234

Evans, Samuel Lewin

2006. Effects of porosity on the fatigue performance of polymethyl methocrylate bone cement: an analytical investigation. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 220 (1) , pp. 1-10. 10.1243/095441105X69024

Bradshaw, T.P., Eaton, Mark Jonathan

and Featherston, Carol Ann

2006. Determination of damage levels of composite plates after low velocity impacts using acoustic emission. Advanced Materials Research 13-14 , pp. 253-258. 10.4028/www.scientific.net/AMR.13-14.253

Pullin, Rhys

and Baxter, M. G. 2006. Acoustic emission testing of a landing gear component. Advanced Materials Research 13-14 , pp. 29-34. 10.4028/www.scientific.net/AMR.13-14.29

Pullin, Rhys

, Theobald, P., Holford, Karen Margaret

2006. Experimental validation of dispersion curves in plates for acoustic emission. Advanced Materials Research 13-14 , pp. 53-60. 10.4028/www.scientific.net/AMR.13-14.53

Dillon, D., Jones, A., Ahuja, S., Holt, Catherine Avril

, Hunt, C., Howes, J. and Davies, P 2006. Anterior or posteria stabilisation following corpectomy for unstable thoracolumbar burst fractures - a biomechanical study. Presented at: Britspine: 4th combined meeting of the British Scoliosis Society, British Cervical Spine society, Society for Back Pain Research, British Association of Spinal Surgeons, Cardiff, UK,

Bradshaw, T. P., Eaton, Mark Jonathan

and Featherston, Carol Ann

2006. Determination of damage levels of composite plates after low velocity impact using acoustic emission. Presented at: 27th European Conference on Acoustic Emission Testing (EWGAE 2006), Cardiff, UK,

Liu, H., Evans, Samuel Lewin

, Zhurov, A. and Middleton, J. 2006. Development of an optical motion analysis system to measure small movement in three-dimensional space. Presented at: 4th IASTED International Association of Science and Technology for Development International conference (BIOMED2006), Innsbruck, Austria, 15–17 February 2006. Proceedings. 4th IASTED International Association of Science and Technology for Development International conference (BIOMED2006), Innsbruck, Austria. pp. 186-190.

Liu, H., Holt, Catherine Avril

2006. Measuring tooth movement in 3D: Resolution, accuracy and reliability of the optical motion capture system. Presented at: 8th International Symposium on 3D motion analysis, Valenciennes, France, Proceedings of the International Society of Biomechanics. 8th International Symposium on 3D motion analysis, Valenciennes, France.

Liu, H., Holt, Catherine Avril

and Knox, J. 2006. Development of novel techniques in vivo measurement of mechanical properties of periodontal ligament [Abstract]. Journal of Biomechanics 39 (S1) , pp. 201-202.

Liu, H., Holt, Catherine Avril

, Zhurov, A. and Middleton, J. 2006. Three coordinate systems method to compute tooth movement of six degrees of freedom using motion capture data. Presented at: 6th International Conference on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE2006), Antibes, France, Proceedings of the 6th International Conference on Computer Methods in Biomechanics and Biomedical Engineering (CMBBE2006), Antibes, France. pp. 379-384.

Holt, Catherine Avril

, Dillon, D. and Ahuja, Alka Surajprakash 2005. Three-dimensional measurement of intervertebral kinematics in vitro using optical motion analysis. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of engineering in medicine 219 (6) , pp. 393-399. 10.1243/095441105X34374

Baxter, M. G., Pullin, Rhys

2005. Detection of fatigue crack growth in aircraft landing gear, 4 point bend specimens. Key Engineering Materials 293-94 , 193 -200. 10.4028/www.scientific.net/KEM.293-294.193

Evans, Samuel Lewin

, Featherston, Carol Ann

and Griffiths, D. R. 2005. Development of a low cost, durable, mixed waste plastic pallet. CIWM Scientific and Technical Review 6 (1) , pp. 4-13.

Evans, Samuel Lewin

2004. Efficient modelling of inhomogenous materials using unaligned meshing and Gauss point refinement (invited keynote presentation). Presented at: 6th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Madrid, Spain,

Webster, S. V., Bishop, J. C., Williams, A. W., Evans, Samuel Lewin

and Archer, Charles William 2004. Transplanted chondoprogenitors rapidly fill partial depth lesion in vitro. Presented at: 5th Symposium of the International Cartilage Repair Society, Ghent, Belgium,

Evans, Bronwen A. J.

, Warner, Justin T., Elford, Carole, Evans, Samuel Lewin

, Laib, L., Bains, R. K., Gregory, John Welbourn

and Wells, Tim

2003. Morphological determinants of femoral strength in growth hormone-deficient transgenic growth-retarded (Tgr) rats. Journal of Bone and Mineral Research 18 (7) , pp. 1308-1316. 10.1359/jbmr.2003.18.7.1308

Evans, B A J, Warner, J T, Elford, C, Evans, Samuel Lewin

, Bains, R K, Gregory, J W and Wells, T 2003. Endocrine and morphological determinants of femoral strength and trabecular organisation in growth hormone-deficient transgenic growth retarded (Tgr) rats. Journal of Bone and Mineral Research 18 (7) , pp. 1308-1316. 10.1359/jbmr.2003.18.7.1308

Dillon, D., Ahuja, S., Evans, Samuel Lewin

, Howes, J. and Davies, P. R. 2003. Stability of global fusion in a calf spine model. Journal of Bone and Joint Surgery 85B (15)

Jones, A. J., Dillon, D., Holt, Catherine Avril

, Hunt, C. M., Howes, J. and Davies, P. 2003. Does combined anterior and posterior spinal fixation confer advantages over posterior alone?

Evans, Samuel Lewin

, Thomas, K., Pullen, R. and Holford, Karen Margaret

2003. Problems in the fatigue testing of PMMA bone cements. Presented at: Proceedings of the 2nd International Conference on New Biomedical Materials, Cardiff, UK,

Evans, Samuel Lewin

, Hunt, C. M. and Ahuja, S. 2002. Bone cement or bone substitute augmentation of pedicle screws improves pullout strength in posterior spinal fixation. Journal of Materials Science: Materials in Medicine 13 (12) , pp. 1143-1145. 10.1023/A:1021133819646

Ahuja, S., Dillon, D., Evans, Samuel Lewin

, Davies, P. and Howes, J 2002. How many cross-links are needed in short segment posterior stablisation of thoraco-lumbar fractures? Presented at: 9th International Meeting on Advanced Spine Techniques (IMAST), Montreux, Switzerland,

Ahuja, S., M., Hunt C., Evans, Samuel Lewin

and Davies, P. R 2002. Comparision of pull out strengths of pedicle screws augmented with Cortoss or Palacos LV. Presented at: 9th International Meeting on Advanced Spine Techniques (IMAST), Montreux Switzerland,

Evans, Samuel Lewin

2002. A stochastic model of fatigue damage development in bone cement. Presented at: European Society of Biomaterials, Barcelona, Spain,

Evans, Samuel Lewin

2002. A stochastic model of fatigue damage development in bone cement. Presented at: 4th World Congress of Biomechanics, Calgary, Canada,

Evans, Samuel Lewin

, Ahuja, S. and Hunt, C. M. 2002. Cement of cortoss augmentation of pedicle screws improves pullout strength. Presented at: British Orthopaedic Research Society, Cardiff, UK,

Evans, Samuel Lewin

, Ahuja, S. and Hunt, C. M. 2002. Pullout strength of pedicle screws improves with Palacos or Cortoss augmentation. Presented at: 4th World Congress of Biomechanics, Calgary, Canada,

Evans, Samuel Lewin

, Ahuja, S. and Hunt, C. M. 2002. Bone cement augmentation of pedicle screws improves pullout strength in posterior spinal fixation. Presented at: European Society of Biomaterials, Barcelona, Spain,

Evans, Samuel Lewin

, Jones, L., Dillon, D., Ahuja, S. and Davies, P. 2002. Anterior interbody fusion with transfacet screws: a biomechanical study. Presented at: Proceedings of the 4th World Congress of Biomechanics, Calgary, Canada,

Hunt, C. M., Holt, Catherine Avril

, Jones, L., Evans, Samuel Lewin

, Ahuja, S., Dillon, D., Davies, P. and Howes, J. A. 2002. A method for studying 3D movement of the spine in vitro. Presented at: 4th World Congress of Biomechanics, Calgary, Canada,

Jones, A., Dillon, D., Ahuja, S., Holt, Catherine Avril

, Hunt, C., Howes, J. and Davies, P. 2002. Are two cross links needed for rotationally unstable fractures of thoraco-lumbar spine? Presented at: Podium Presentation at 9th International Meeting on Advanced Spine Techniques, Montreaux, Switzerland.,

Jones, A., Dillon, D., Ahuja, S., Holt, Catherine Avril

, Hunt, C., Howes, J. and Davies, P. 2002. Which produces the most rigid construct in the burst fracture setting? Presented at: Podium Presentation at Proceedings of the European Orthopaedic Research Society, Switzerland, Montreux, Switzerland,

Jones, A., Holt, Catherine Avril

, Dillon, D., Hunt, C., Evans, Samuel Lewin

, Ahuja, S., Howes, J. and Davies, P. 2002. Does combined spinal fixation confer advantages over posterior alone? Presented at: Meeting of the British Orthopaedic Research Society, Cardiff, UK,

Hunt, C. M., Evans, Samuel Lewin

, Jones, L., Ahuja, S., Dillon, D., Davies, P and Howes, J. 2002. The use of 3D analysis techniques to measure the effect of pedicle screw systems with cross-links on spine stability. Presented at: 5th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Rome, Italy, 31 October to 3 November 2001. Published in: Middleton, J., Shrive, N. and Jones, M. L. eds. Computer methods in biomechanics and biomedical engineering - 4. Cardiff: University of Wales College of Medicine, pp. 5-30.

Ahuja, Alka Surajprakash, Dillon, S., Evans, Samuel Lewin

, Davies, P. R. and Howes, J. 2002. How many cross-links are needed in posterior short segment stabilization of thoraco-lumbar fractures? Presented at: 9th International Meeting on Advanced Spine Techniques (IMAST), Montreux, Switzerland, 23–25 May 2002.

Hunt, C. M., Holt, Catherine Avril

, Jones, L., Jones, A., Ahuja, S, Dillon, D., Davies, P. and Howes, J. 2002. Studying the effects of spinal instrumentation by measurement of in vitro intervertebral kinematics. Presented at: Seventh International Symposium on the 3-D Analysis of Human Movement, Newcastle upon Tyne, UK, 10-12 July 2002. Proceedings of the 7th International Symposium on the 3-D Analysis of Human Movement 2002, 10-12 July, 2002, International Centre for Life Newcastle upon Tyne, U.K. Newcastle: Centre for Rehabilitation and Engineering Studies, pp. 40-43.

Dillon, D., Ahuja, S., Evans, Samuel Lewin

, Howes, J. and Davies, P.R. 2002. The lumbar global fusion - anterior or posterior first? Journal of Bone and Joint Surgery (Br) 84-B (SIII) , pp. 329-330.

Walsh, Sean P., Evans, Samuel Lewin

, O'Doherty, Daphne Maria and Barlow, I. W. 2001. Failure strengths of suture vs. biodegradable arrow and staple for meniscal repair: an in vitro study. The Knee 8 (2) , pp. 151-156. 10.1016/S0968-0160(00)00084-3

O'Callaghan, P. T., Jones, Michael David

, James, D. S., Leadbetter, S., Evans, Samuel Lewin

and Nokes, Leonard Derek Martin

2001. A biomechanical reconstruction of a wound caused by a glass shard - case report. Forensic Science International 117 (3) , pp. 221-231. 10.1016/S0379-0738(00)00399-6

Evans, Samuel Lewin

2001. Prediction of fatigue crack development in bone cement (invited keynote presentation). Presented at: 5th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Rome, Italy,

Loveridge, P., Featherston, Carol Ann

2001. Analysis of the buckling of trabecular bone using a cellular model. Presented at: 5th International Symposium On Computer Methods, Biomechanics And Biomedical Engineering, Rome, Italy,

Loveridge, P., Featherston, Carol Ann

2001. Analysis of the buckling of trabecular bone using a cellular model. Presented at: European Society of Biomaterials, 25th Anniversary Conference, London, UK, 9-12 September 2001. (Proceedings) 16th European Society for Biomaterials Conference 2001 (25th Anniversary), London, UK, 9-12 September, 2001.

Westgate, J. C. and Evans, Samuel Lewin

2001. Effects of ageing and moisture uptake on mechanical properties of PMMA bone cement. Presented at: European Society for Biomaterials 25th Anniversary Conference, London, UK,

Warner, Justin T., Wells, Timothy

, Elford, Carole, Evans, Bronwen Alice James

and Gregory, John Welbourn

2000. Undermineralisation and reduced bone strength in growth hormone (GH) deficient transgenic (Tgr) rats. Journal of Bone and Mineral Research (JBMR) 15 (6) , p. 1219.

Wheeler, L. K., Maylia, E., Jones, Michael David

and Nokes, Leonard Derek Martin

2000. Subjective assessment of blunt impacts. Medicine, Science and the Law 40 (3) , pp. 263-269.

Muoneke, H., Holt, Catherine Avril