ORCA
Online Research @ Cardiff

Clear Cookie - decide language by browser settings

Browse by Schools (by year)

Up a level

Group by: Creators | Item Type | No Grouping

Jump to: A | B | C | D | E | G | H | J | K | L | M | N | P | S | W | X | Z

Number of items: 99.

A

Ahsan, Q., Amer, W., Grosvenor, Roger Ivor

and Prickett, Paul William

2004. Sweeping filter technique for frequency analysis. Presented at: Quality, Reliability, and Maintenance (QRM), Oxford, UK, PEP Ltd, pp. 185-189.

Ahsan, Q., Grosvenor, Roger Ivor

and Prickett, Paul William

2004. Distributed control loop performance monitoring architecture. Presented at: Control 2004, Bath, UK, University of Bath,

Ahsan, Q., Grosvenor, Roger Ivor

and Prickett, Paul William

2004. A reduced traffic software model for distributed monitoring systems. Presented at: The 17th International Congress & Exhibition on Condition Monitoring and Diagnostic Engineering Management (COMADEM), Cambridge, UK, pp. 204-213.

Amer, W., Ahsan, Q., Grosvenor, Roger Ivor

and Prickett, Paul William

2004. Machine tool signal analysis using sweeping filter technique. Presented at: Quality, Reliability, and Maintenance (QRM 2004), Oxford, UK, PEP Ltd, pp. 189-193.

Amer, W., Grosvenor, Roger Ivor

and Prickett, Paul William

2004. A distributed system based on sweeping filters for machine tool monitoring. Presented at: Congress & Exhibition on Condition Monitoring And Diagnostic Engineering Management (COMADEM 2004 International), Cambridge, UK, pp. 195-203.

Aryee, Gilbert, Naim, Mohamed Mohamed

, Lalwani, C. and Disney, Stephen Michael

2004. A maturity model for collaboration and technological integration in the supply chain. Presented at: 11th International Annual EurOMA Conference, Fontainebleau, France, 27-29 June 2004. Proceedings of the 11th International Annual EurOMA Conference, INSEAD, Fontainebleau, France, 27-29 June. Brussels: European Operations Management Association (EurOMA), pp. 33-42.

B

Barker, Ralph, Childerhouse, Paul, Naim, Mohamed Mohamed

, Masat, Jan and Wilson, Derek 2004. Potential of Total Cycle Time Compression in Construction: Focus on Program Development and Design. Journal of Construction Engineering and Management 130 (2) , pp. 177-187. 10.1061/(ASCE)0733-9364(2004)130:2(177)

Barker, Ralph and Naim, Mohamed Mohamed

2004. Housebuilding Supply Chains: Remove Waste - Improve Value. International Journal of Logistics Management 15 (2) , pp. 51-64. 10.1108/09574090410700301

Bateman, N. and Mason, Robert John

2004. Carton damage in the supply chain – a spring board for co-operation. Presented at: 14th IAPRI World Conference on Packaging, Stockholm, Sweden, 13–16 June 2004.

Baxter, M. G., Pullin, Rhys

and Holford, Karen Margaret

2004. Detection of fatigue cracks in aircraft landing gear. Presented at: 26th European Conference on Acoustic Emission Testing, Berlin, Germany, pp. 331-341.

Bigot, Samuel

, Dimov, S S, Ivanov, A and Pham, D T 2004. Micro-EDM—recent developments and research issues. Journal of Materials Processing Technology 149 (1-3) , pp. 50-57. 10.1016/j.jmatprotec.2004.02.008

Brousseau, Emmanuel Bruno Jean Paul

2004. Intelligent techniques for automatic feature recognition in CAD models. PhD Thesis, Cardiff University.

C

Childerhouse, P., Disney, Stephen Michael

and Towill, Denis Royston 2004. Tailored toolkit to enable seamless supply chains. International Journal of Production Research 42 (17) , pp. 3627-3646. 10.1080/00207540410001696014

D

Davies, I., Mason, Robert John

and Lalwani, Chandra 2004. An evaluation of the use of freight exchanges in general haulage. Presented at: 9th International Symposium on Logistics (ISL 2004), Bangalore, India, 11-14 July 2004. Published in: Pawar, Kulwant ed. Logistics and Global Outsourcing: Proceedings of the 9th International Symposium on Logistics, Bangalore, India, 11th - 14th July 2004. Nottingham: Centre for Concurrent Enterprise, pp. 385-391.

Dejonckheere, J., Disney, Stephen Michael

, Lambrecht, M. R. and Towill, Denis Royston 2004. The impact of information enrichment on the Bullwhip effect in supply chains: A control engineering perspective. European Journal of Operational Research 153 (3) , pp. 727-750. 10.1016/S0377-2217(02)00808-1

Dhandapani, Vijay, Potter, Andrew Thomas

and Naim, Mohamed Mohamed

2004. Applying lean thinking: a case study of an Indian steel plant. International Journal of Logistics: Research and Applications 7 (3) , pp. 239-250. 10.1080/13675560412331298491

Dimov, Stefan Simeonov, Pham, Duc Truong, Bigot, Samuel

, Ivanov, Atanas and Popov, Krastimir Borisov 2004. A Study of the Accuracy of the Micro Electrical Discharge Machining Drilling Process. Presented at: 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Bath, UK, 5- 7 April 2004. Proceedings of the 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering,( IDMME) (Bath, UK). University of Bath, pp. 1-12.

Dimov, Stefan Simeonov, Setchi, Rossitza

and Brousseau, Emmanuel Bruno Jean Paul

2004. Automatic feature recognition a hybrid approach. Presented at: 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering, Bath, UK, 5- 7 April 2004. 5th International Conference on Integrated Design and Manufacturing in Mechanical Engineering (IDMME 04) (Bath,UK). University of Bath, p. 59.

Disney, Stephen Michael

, Farasyn, Ingrid, Lambrecht, Marc and Towill, Denis Royston 2004. The golden ratio in production and inventory control. Presented at: POM 2004: 2nd World POM Conference and the 15th Annual POM Conference, Cancun, Mexico, 30 April – 3 May 2004.

Disney, Stephen Michael

and Grubbström, R. W. 2004. Economic consequences of a production and inventory control policy. International Journal of Production Research 42 (17) , pp. 3419-3431. 10.1080/00207540410001727640

Disney, Stephen Michael

, Naim, Mohamed Mohamed

and Potter, Andrew Thomas

2004. Assessing the impact of e-business on supply chain dynamics. International Journal of Production Economics 89 (2) , pp. 109-118. 10.1016/S0925-5273(02)00464-4

Disney, Stephen Michael

, Potter, Andrew Thomas

and Gardner, Bernard Maples 2004. The impact of VMI on transport operations. Lalwani, C., Mason, Robert John, Potter, Andrew Thomas and Yang, Biao, eds. Transport in Supply Chains, Cardiff: Cardiff University: Cardiff Business School,

Disney, Stephen Michael

, Towill, Denis Royston and van de Velde, W. 2004. Variance amplification and the golden ratio in production and inventory control. International Journal of Production Economics 90 (3) , pp. 295-309. 10.1016/j.ijpe.2003.10.009

Dunne, P., Soe, Shwe, Byrne, G., Venus, A. D. and Wheatley, A. R. 2004. Some demands on rapid prototypes used as master patterns in rapid tooling for injection moulding. Journal of Materials Processing Technology 150 (3) , pp. 201-207. 10.1016/S0924-0136(03)00571-5

E

Evans, Samuel Lewin

2004. Efficient modelling of inhomogenous materials using unaligned meshing and Gauss point refinement (invited keynote presentation). Presented at: 6th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Madrid, Spain,

G

Gaalman, G. and Disney, Stephen Michael

2004. State space investigation of bullwhip with arbitrary demand processes. Presented at: 13th International Working Seminar on Production Economics, Igls, Austria, 16–20 February 2004.

Grubbström, R. W., Bogataj, L., Bonney, M., Disney, Stephen Michael

and Tang, O. 2004. Inter-linking MRP theory and production and inventory control models. Presented at: 13th International Working Seminar on Production Economics, Igls, Austria, 16–20 February 2004.

H

Holford, Karen Margaret

, Featherston, Carol Ann

, Pullin, Rhys

and Eaton, Mark Jonathan

2004. Acoustic emission monitoring of buckling behaviour in impact-damaged composite plates. Presented at: 26th European Conference on Acoustic Emission Testing, Berlin, Germany, pp. 427-434.

Holford, Karen Margaret

, Pullin, Rhys

and Lark, Robert John

2004. Acoustic emission modelling of concrete hinge joint models. Journal of Acoustic Emission 22 , pp. 166-172.

Hosada, Takamichi S. and Disney, Stephen Michael

2004. The role of an ordering policy as an inventory and cost controller. Presented at: Logistics Research Network Annual Conference, Dublin, Ireland, 8-10 September 2004.

Hosoda, Takamichi and Disney, Stephen Michael

2004. An analysis of a three echelon supply chain model with minimum mean squared error forecasting. Presented at: Second World POM Conference and the Fifteenth Annual POM Conference, Cancun, Mexico, 30 April - 3 May 2004. Published in: Gupta, Sushil ed. Proceedings of POM 2004: 2nd World Conference 15th Annual POMS Conference, Cancun, Mexico, 29 April- 3 May 2004. European Operations Management Association; Production and Operations Management Society; Japanese Society for Production Management, 002-0069.

J

James, Mark, Grosvenor, Roger Ivor

and Prickett, Paul William

2004. e-Distribution: internet-based management of a merchandiser supply chain. Supply Chain Management: An International Journal 9 (1) , pp. 7-15. 10.1108/13598540410517539

K

Kawashita, Luiz

, Moore, D. R. and Williams, J. G. 2004. The development of a mandrel peel test for the measurement of adhesive fracture toughness of epoxy-metal laminates. The Journal of Adhesion 80 (3) , pp. 147-167. 10.1080/00218460490279215

L

Lagoudis, I. N., Lalwani, C. S. and Naim, Mohamed Mohamed

2004. A generic systems model for ocean shipping companies in the bulk sector. Transportation Journal 43 (1) , pp. 56-76.

Lalwani, C. S., Pawar, K. S., Naim, Mohamed Mohamed

and Shah, J. 2004. Contextualisation of uncertainty reduction practices in Indian manufacturing firms. Presented at: International Conference on Responsive Supply Chain and Organisational Responsiveness, Coimbatore, India, 5-7 January 2004.

M

Mason, Robert John

, Bateman, Nicola and Wood, Greg 2004. Damaged goods, damaged reputations. ECR Journal 4 (2) , pp. 36-40.

Mason, Robert John

and Lalwani, Chandra 2004. Integrating transportation into the supply chain to improve supply chain performance. Presented at: Logistics Research Network Annual Conference 2004, Dublin, Ireland, 9-10 September 2004.

N

Naim, Mohamed Mohamed

, Disney, Stephen Michael

and Towill, Denis Royston 2004. Supply chain dynamics. New, Steve and Westbrook, Roy, eds. Understanding Supply Chains: Concepts, Critiques and Futures, Oxford: Oxford University Press, pp. 109-132.

Naim, Mohamed Mohamed

and Tang, O 2004. The impact of information transparency on the dynamic behaviour of a hybrid manufacturing/remanufacturing system. International Journal of Production Research 42 (19) , pp. 4135-4152. 10.1080/00207540410001716499

Nieuwenhuis, Paul Andre Henri, Vergragt, Philip J. and Wells, Peter Erskine

2004. Technological change and regulation in the car industry: Introduction. Greener Management International 47 , pp. 5-11.

P

Packianather, Michael Sylvester

and Drake, P R 2004. Modelling neural network performance through response surface methodology for classifying wood veneer defects. Proceedings of Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 218 (4) , pp. 459-466. 10.1243/095440504323055588

Packianather, Michael Sylvester

and Drake, P. R. 2004. A modelling neural network performance through response surface methodology for classifying wood veneer defects. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 218 (4) , pp. 459-466. 10.1243/095440504323055588

Pham, Duc Truong, Dimov, Stefan Simeonov, Setchi, Rossitza M.

, Peat, Bernard, Soroka, Anthony John

, Brousseau, Emmanuel Bruno Jean Paul

, Huneiti, Ammar M., Lagos, Nikolaos, Noyvirt, Alexander Emilov, Pasantonopoulos, Charilaos, Tsaneva, Daniela K. and Tang, Qiao 2004. Product lifecycle management for performance support. Journal of Computing and Information Science in Engineering 4 (4) , pp. 305-315. 10.1115/1.1818687

Pham, Duc Truong, Dimov, Stefan Simeonov and Soroka, Anthony John

2004. An agent system for the gathering of product fault information. Presented at: International Conference on Industrial Informatics, Berlin, 24 - 26 June 2004. 2004 2nd IEEE International Conference on Industrial Informatics : Collaborative Automation--One Key For Intelligent Industrial Environments : 24th-26th June, 2004, Berlin, Germany. Piscataway, New Jersey: IEEE, pp. 536-539. 10.1109/INDIN.2004.1417402

Pham, Duc Truong, Dimov, Stefan Simeonov and Soroka, A. J. 2004. An agent system for gathering knowledge within an enterprise. Presented at: Proceedings 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, Sorrento, Italy, pp. 575-579.

Pham, Duc Truong, Dimov, Stefan Simeonov and Soroka, A. J. 2004. An agent system for the gathering of product fault information. Presented at: Proceedings 2nd IEEE International Conference on Industrial Informatics, Berlin, Germany, pp. 536-539.

Pham, Duc Truong, Soroka, A. J., Eldukhri, Eldaw Elzaki, Pham, P. T. N. and Dimov, Stefan Simeonov 2004. Integrating EU advanced manufacturing research. Presented at: Proceedings 2nd IEEE International Conference on Industrial Informatics, INDIN 2004, Berlin, Germany, pp. 13-18.

Pham, Duc Truong, Bigot, Samuel

and Dimov, Stefan Simeonov 2004. A new technique for fuzzy rule induction. Presented at: Proceedings 4th CIRP International Seminar on Intelligent Computation in Manufacturing (ICME '04), Sorrento, Italy, pp. 621-626.

Pham, Duc Truong, Bigot, Samuel

and Dimov, Stefan Simeonov 2004. A rule merging technique for handling noise in inductive learning. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 218 (10) , pp. 1255-1268. 10.1243/0954406042369017

Pham, Duc Truong, Dimov, Stefan Simeonov, Bigot, Samuel

, Ivanov, Atanas and Popov, Krastimir Borisov 2004. Micro-EDM - recent developments and research issues. Journal of Materials Processing Technology 149 (1-3) , pp. 50-57. 10.1016/j.jmatprotec.2004.02.008

Pham, Duc Truong, Eldukhri, Eldaw Elzaki, Peat, B., Setchi, Rossitza

, Soroka, A. J., Packianather, Michael Sylvester

, Thomas, A. J., Dadam, Y. and Dimov, Stefan Simeonov 2004. Innovative production machines and systems (I*PROMS): a network of excellence funded by the EU sixth framework programme. Presented at: Proceedings 2nd IEEE International Conference on Industrial Informatics (INDIN2004), Berlin, Germany, pp. 540-544.

Pham, Duc Truong, Eldukhri, Eldaw Elzaki, Setchi, Rossitza

, Soroka, A. J., Packianather, Michael Sylvester

, Thomas, A. J., Dadam, Y. and Dimov, Stefan Simeonov 2004. Integrating European advanced manufacturing research: the FP6 I*PROMS network of excellence. Presented at: Proceedings 4th CIRP (ICME 04), Sorrento, Italy, pp. 543-548.

Pham, Duc Truong, Packianather, Michael Sylvester

, Dimov, Stefan Simeonov, Soroka, A. J., Gerard, T., Bigot, Samuel

and Salem, Z. 2004. An application of datamining and machine learning techniques in the metal industry. Presented at: Proceedings 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, Sorrento, Italy, pp. 617-620.

Potter, Andrew Thomas

, Mason, Robert John

, Naim, Mohamed Mohamed

and lawlani, Chunnilal Sunderdas 2004. The evolution towards an integrated steel supply chain: A case study from the UK. International Journal of Production Economics 89 (2) , pp. 207-216. 10.1016/S0925-5273(02)00449-8

Potter, Andrew Thomas

, Breite, Rainer, Naim, Mohamed Mohamed

and Vanharanta, Hannu 2004. The potential for achieving mass customization in primary production supply chains via a unified taxonomy. Production Planning & Control 15 (4) , pp. 472-481. 10.1080/0953728042000238746

Potter, Andrew Thomas

and Lalwani, C. S. 2004. Developing a methodology to analyse despatch bay performance. Presented at: 9th International Symposium on Logistics (ISL 2004), Bangalore, India, 11-14 July 2004. Published in: Pawar, Kulwant S. ed. Logistics and Global Outsourcing: Proceedings of the 9th International Symposium on Logistics, Bangalore, India, 11- 14 July 2004. Centre for Concurrent Enterprise, University of Nottingham Business School, pp. 609-616.

Pullin, Rhys

, Holford, Karen Margaret

and Lark, Robert John

2004. Christchurch Hill (Royal Oak) Overbridge: an investigation of the use of acoustic emission to monitor the behaviour of the thrust hinges. [Project Report].

Pullin, Rhys

, Holford, Karen Margaret

and Lark, Robert John

2004. An investigation of the use of acoustic emission to monitor hinge joints. [Project Report].

S

Setchi, Rossitza M.

and Lagos, N. 2004. Intelligent product support for reconfigurable manufacturing. Presented at: 4th CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, Sorrento, Italy, pp. 565-570.

Setchi, Rossitza M.

and Lagos, N. 2004. Reconfigurability and reconfigurable manufacturing systems – state of the art review. Presented at: 2nd IEEE International Conference on Industrial Informatics (INDIN '04), Berlin, Germany, pp. 529-535.

W

Warburton, R D H, Disney, Stephen Michael

, Towill, Denis Royston and Hodgson, J P E 2004. Technical Note: Further insights into 'the stability of supply chains'. International Journal of Production Research 42 (3) , pp. 639-648. 10.1080/00207540310001621846

Wells, Peter Erskine

2004. Creating sustainable business models: the case of the automotive industry. IIMB Management Review 16 (4) , pp. 15-24.

Wells, Peter Erskine

2004. The eco-rover concept. Automotive Environment Analyst 114 , pp. 16-18.

Wells, Peter Erskine

2004. The end of the affair. Automotive Components Analyst 71 , pp. 49-50.

Wells, Peter Erskine

2004. The end of the affair. World Automotive Manufacturing 75 71 , pp. 52-54.

Wells, Peter Erskine

2004. The end of the affair. World Automotive Manufacturing 75 119 , pp. 49-50.

Wells, Peter Erskine

2004. The end of the affair. World Vehicle Manufacturers Analyst 2 , pp. 80-82.

Wells, Peter Erskine

2004. The end of the affair. Automotive Powertrain Analyst 23 , pp. 40-41.

Wells, Peter Erskine

2004. The EU CO2 voluntary agreement: The causes of the problem. Automotive Environment Analyst 105 , pp. 42-43.

Wells, Peter Erskine

2004. The EU CO2 voluntary agreement: the policy implications. Automotive Environment Analyst 105 , pp. 44-45.

Wells, Peter Erskine

2004. The future for hydrogen fuel cell applications in an era of technological and economic diversity: the case of the automotive industry. Presented at: Fuel Cells 2004, Toronto, Canada, 2004.

Wells, Peter Erskine

2004. The investment crisis: can the global automotive industry affords its future? World Automotive Manufacturing 65 , pp. 23-25.

Wells, Peter Erskine

2004. The investment crisis: Can the industry afford it's future? Automotive Emerging Markets 72 , pp. 31-33.

Wells, Peter Erskine

2004. The investment crisis: Can the industry afford it's future? World Automotive Manufacturing 75 72 , pp. 23-25.

Wells, Peter Erskine

2004. Is production in Western Europe sustainable? World Automotive Manufacturing 75 , pp. 22-24.

Wells, Peter Erskine

2004. Is Vancouver the new Detroit? Automotive Environment Analyst 104 , pp. 22-23.

Wells, Peter Erskine

2004. The limits to growth? Automotive Environment Analyst 108 , pp. 34-36.

Wells, Peter Erskine

2004. The limits to growth? Automotive Powertrain Analyst 118 , pp. 45-46.

Wells, Peter Erskine

2004. Noise: The insidious pollutant. Automotive Environment Analyst 110 , pp. 35-36.

Wells, Peter Erskine

2004. Production in Central and Eastern Europe: Too far too fast? Automotive Emerging Markets 83 , pp. 24-26.

Wells, Peter Erskine

2004. Quicksands for the unwary. World Vehicle Manufacturers Analyst 4 , pp. 76-77.

Wells, Peter Erskine

2004. Quicksands for the unwary. Automotive Environment Analyst 112 , pp. 31-32.

Wells, Peter Erskine

2004. Silicon valleys to hydrogen highways. Automotive Environment Analyst 105 , pp. 40-41.

Wells, Peter Erskine

2004. Tango: squeezing into the electric vehicle niche. Automotive Environment Analyst 111 , pp. 46-48.

Wells, Peter Erskine

2004. UK engine production. Automotive Powertrain Analyst 26 , pp. 26-27.

Wells, Peter Erskine

2004. UK engine production. World Vehicle Manufacturers Analyst 4 , pp. 78-81.

Wells, Peter Erskine

2004. UK engine production. World Automotive Manufacturing 75 74 , pp. 17-19.

Wells, Peter Erskine

2004. Vehicle architectures: Why they matter for environmental performance. Automotive Powertrain Analyst 115 , pp. 46-47.

Wells, Peter Erskine

and Kurani, Y. Y. 2004. The automotive industry in India: Between economics and the environment. Automotive Environment Analyst 108 , pp. 36-38.

Wells, Peter Erskine

and Nieuwenhuis, Paul Andre Henri Francois 2004. Decentralization and Small-Scale Manufacturing: The Basis of Sustainable Regions? Journal of Environmental Policy & Planning 6 (3-4) , pp. 191-205. 10.1080/1523908042000344087

Wells, Peter Erskine

and Seitz, Margarete Anna 2004. Business models and closed-loop supply chains: An analysis of the automotive industry. Presented at: POM 2004: 2nd World POM Conference and the 15th Annual POM Conference, Cancun, Mexico, 30 April – 3 May 2004. Published in: Gupta, Sushil ed. POM 2004: Proceedings of the 2nd World POM Conference and the 15th Annual POM Conference, Cancun, Mexico April 30 – May 3, 2004. European Operations Management Association; Production and Operations Management Society; Japanese Society for Production Management, 002-0043.

Wells, Peter Erskine

, Seitz, Margarete Anna and Naim, Mohamed Mohamed

2004. The impact of product variety on closed-loop supply chains: An automotive perspective. Presented at: POM 2004: 2nd World POM Conference and the 15th Annual POM Conference, Cancun, Mexico, 30 April – 3 May 2004. Published in: Gupta, Sushil ed. POM 2004: Proceedings of the 2nd World POM Conference and the 15th Annual POM Conference, Cancun, Mexico April 30 – May 3, 2004. European Operations Management Association; Production and Operations Management Society; Japanese Society for Production Management, 002-0042.

Williams, Sharon Jayne and Elias, Simon 2004. Business support programmes for the smaller organization. Presented at: 1st International Conference on Small and Medium Sized Enterprises, Lefkada, Greece, 30-31 August 2004.

X

Xue, Yiqin 2004. Control of a time-delay system using network prediction and gain scheduling method. Presented at: 6th International Conference on Frontiers of Design and Manufacturing, Xi'an, China,

Xue, Yiqin, Yusop, M. J. and Ji, X. 2004. Energy saving in pneumatic actuation using the gas law prediction. Presented at: Bath Workshop on Power Transmission and Motion Control (5th:2003), Bath, UK, 10-12 September 2003. Published in: Burrows, C. R. and Edge, K. A. eds. Bath Workshop on Power Transmission and Motion Control: PTMC 2003. , vol.1 London: Professional Engineering Publishing, pp. 319-331.

Z

Zhou, L., Disney, Stephen Michael

, Lalwani, C. S. and Wu, H. l. 2004. Reverse logistics: A study of bullwhip in continuous time. Presented at: 5th World Congress on Intelligent Control and Automation, Hangzhou, China, 15-19 June 2004. Published in: Da Xue, Zhejiang ed. WCICA 2004 - Proceedings of the 5th World Congress on Intelligent Control and Automation. , vol.4 Piscataway, NJ: IEEE, pp. 3539-3542. 10.1109/WCICA.2004.1343205

Zhou, L. and Disney, Stephen Michael

2004. Application of Åström's method to supply chain inventory problems: A reverse logistics scenario. Presented at: Workshop of the Gesellschaft für Operation Research e.V.: Operations Research and Reverse Logistics, Eindhoven, The Netherlands, 25–26 March 2004.

Zhou, Li, Naim, Mohamed Mohamed

, Tang, O. and Towill, Denis Royston 2004. Dynamic performance of a hybrid inventory system with a Kanban policy in remanufacturing process. Presented at: 13th International Working Seminar on Production Economics, Igls, Austria, 16–20 February 2004.

Zhou, Li, Towill, Denis Royston and Disney, Stephen Michael

2004. Bullwhip reduction in supply chains - whose lens are we looking through? Presented at: 13th International Symposium on Inventories, Budapest, Hungary, 22-27 August 2004.

This list was generated on Mon Feb 10 10:43:56 2025 GMT.