ORCA
Online Research @ Cardiff

Clear Cookie - decide language by browser settings

Browse by Schools (by year)

Up a level

Group by: Creators | Item Type | No Grouping

Jump to: Article | Book | Book Section | Conference or Workshop Item | Monograph

Number of items: 101.

Article

Boute, Robert N., Disney, Stephen Michael

, Lambrecht, Marc R. and Van Houdt, Benny 2009. Designing replenishment rules in a two-echelon supply chain with a flexible or an inflexible capacity strategy. International Journal of Production Economics 119 (1) , pp. 187-198. 10.1016/j.ijpe.2009.01.012

Childerhouse, P., Disney, Stephen Michael

and Towill, Denis Royston 2009. The effects of schedule volatility on supply chain performance. International Journal of Logistics Research and Applications 12 (4) , pp. 313-328. 10.1080/13675560903076206

Disney, Stephen Michael

2009. Bullwhip effect in supply chains.

Disney, Stephen Michael

2009. Editorial for the special issue: papers from the 19th international conference on production research. International Journal of Logistics Research and Applications 12 (4) , pp. 231-232. 10.1080/13675560903075919

Disney, Stephen Michael

and Hosoda, Takamichi 2009. Altruistic behaviour in a two-echelon supply chain with unmatched proportional feedback controllers. International Journal of Intelligent Systems Technologies and Applications 6 (3/4) , pp. 269-286. 10.1504/IJISTA.2009.024257

Eaton, Mark Jonathan

, Pullin, Rhys

, Holford, Karen Margaret

, Evans, Samuel Lewin

, Featherston, Carol Ann

and Rose, A 2009. Use of Macro Fibre Composite Transducers as Acoustic Emmission Sensors. Remote Sensing 1 (2) , pp. 68-79. 10.3390/rs1020068

Frankowiak, M. R., Grosvenor, Roger Ivor

and Prickett, Paul William

2009. Microcontroller-Based process Monitoring using Petri-Nets. EURASIP Journal on Embedded Systems 2009 , 282708. 10.1155/2009/282708

Gaalman, Gerard and Disney, Stephen Michael

2009. On bullwhip in a family of order-up-to policies with ARMA(2,2) demand and arbitrary lead-times. International Journal of Production Economics 121 (2) , pp. 454-463. 10.1016/j.ijpe.2006.11.024

Gosling, Jonathan

, Fowler, Nicholas and Moone, Brian 2009. Bend, don't break. Supply Chain Quarterly , n/a.

Gosling, Jonathan

and Naim, Mohamed Mohamed

2009. Engineer-to-order supply chain management: a literature review and research agenda. International Journal of Production Economics 122 (2) , pp. 741-754. 10.1016/j.ijpe.2009.07.002

Hensman, J., Pullin, Rhys

, Eaton, Mark Jonathan

, Worden, K., Holford, Karen Margaret

and Evans, Samuel Lewin

2009. Detecting and Identifying Artificial Acoustic Emission Signals in an Industrial Fatigue Environment. Measurement Science and Technology 20 (4) , 045101. 10.1088/0957-0233/20/4/045101

Holford, Karen Margaret

, Pullin, Rhys

, Evans, Samuel Lewin

, Eaton, Mark Jonathan

, Hensman, J. and Worden, K. 2009. Acoustic emission for monitoring aircraft structures. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering 223 (5) , pp. 525-532. 10.1243/09544100JAERO404

Hosoda, Takamichi and Disney, Stephen Michael

2009. Impact of market demand mis-specification on a two-level supply chain. International Journal of Production Economics 121 (2) , pp. 739-751. 10.1016/j.ijpe.2009.04.024

Hosoda, Takamichi and Disney, Stephen Michael

2009. On a myth in supply chain management. Journal of the Japanese Industrial Management Association , pp. 431-436.

John, Elwyn Graham, Davies, Alan and Thomas, A. J. 2009. A note on modified Hamiltonian chain: a graph theoretic approach to group technology after Mukhopadhyay et al. International Journal of Production Research 47 (1) , pp. 289-298.

Kumar, Maneesh

and Antony, J. 2009. Multiple case-study analysis of quality management practices within UK Six Sigma and non-Six Sigma manufacturing small- and medium-sized enterprises. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 223 (7) , pp. 925-934. 10.1243/09544054JEM1288

Kumar, Maneesh

, Antony, Jiju and Cho, Byung Rae 2009. Project selection and its impact on the successful deployment of Six Sigma. Business Process Management Journal 15 (5) , pp. 669-686. 10.1108/14637150910987900

Kumar, Maneesh

, Antony, Jiju and Douglas, Alex 2009. Does size matter for Six Sigma implementation?: Findings from the survey in UK SMEs. The TQM Journal 21 (6) , pp. 623-635. 10.1108/17542730910995882

Liu, Ying

and Harding, Jenny 2009. Editorial for the special issue of knowledge discovery and management in engineering design and manufacturing. Journal of Intelligent Manufacturing 20 (5) , pp. 499-500. 10.1007/s10845-008-0209-y

Oztemel, E., Kubat, C., Uygun, O., Canvar, T., Korkusuz, T., Raja, V. and Soroka, Anthony John

2009. Performance assessment of swarm robots. Lecture Notes in Computer Science 5611 , pp. 361-367. 10.1007/978-3-642-02577-8

Pasantonopoulos, C., Dimov, Stefan Simeonov, Pham, Duc Truong and Setchi, Rossitza

2009. An object-orientated framework for virtual intelligent product manuals. International Journal of Systems Science 40 (2) , pp. 187-204. 10.1080/00207720802630727

Pham, Duc Truong, Ji, Ze

and Soroka, Anthony John

2009. Ultrasonic distance scanning techniques for mobile robots. International Journal of Computer Aided Engineering and Technology 1 (2) , pp. 209-224. 10.1504/IJCAET.2009.022787

Potter, Andrew Thomas

, Towill, Denis Royston, Böhme, Tillmann and Disney, Stephen Michael

2009. The influence of multi-product production strategy on factory induced bullwhip. International Journal of Production Research 47 (20) , pp. 5739-5759. 10.1080/00207540802146148

Shukla, Vinaya, Naim, Mohamed Mohamed

and Yaseen, Ehab A. 2009. 'Bullwhip' and 'backlash' in supply pipelines. International Journal of Production Research 47 (23) , pp. 6477-6497. 10.1080/00207540802270096

Syntetos, Argyrios

, Boylan, J. E. and Disney, Stephen Michael

2009. Forecasting for inventory planning: a 50-year review. Journal of the Operational Research Society 60 , S149-s160. 10.1057/jors.2008.173

Walker, Helen Lisbeth

and Phillips, Wendy 2009. Sustainable procurement: emerging issues. International Journal of Procurement Management 2 (1) , pp. 41-61. 10.1504/IJPM.2009.021729

Wells, Peter Erskine

, Bristow, Gillian Irene

, Nieuwenhuis, Paul Andre Henri Francois and Christensen, Thomas Budde 2009. The role of academia in regional sustainability initiatives: Wales. Journal of Cleaner Production 17 (12) , pp. 1116-1122. 10.1016/j.jclepro.2008.11.008

Wong, Hartanto Wijaya, Wikner, Joakim and Naim, Mohamed Mohamed

2009. Analysis of form postponement based on optimal positioning of the differentiation point and stocking decisions. International Journal of Production Research 47 (5) , pp. 1201-1224. 10.1080/00207540701549608

Zhan, Jiaming, Loh, Han Tong and Liu, Ying

2009. Gather customer concerns from online product reviews - A text summarization approach. Expert Systems with Applications 36 (2) , pp. 2107-2115. 10.1016/j.eswa.2007.12.039

Zhan, Jiaming, Loh, Han Tong and Liu, Ying

2009. On macro- and micro-level information in multiple documents and its influence on summarization. International Journal of Information Management 29 (1) , pp. 57-66. 10.1016/j.ijinfomgt.2008.04.011

Book

Setchi, Rossitza

2009. Intelligent product manuals. Saarbrucken: VDM Verlag.

Book Section

Goh, Yee Mey, Giess, Matt, McMahon, Chris and Liu, Ying

2009. From faceted classification to knowledge discovery of semi-structured text records. Abraham, A., Hassanien, A. E., Carvalho, A. P. and Snášel, V., eds. Foundations of Computational Intelligence, Vol. 6. Studies in Computational Intelligence, vol. 206. Berlin: Springer, pp. 151-169. (10.1007/978-3-642-01091-0_7)

Gosling, Jonathan

and Naim, Mohamed Mohamed

2009. Coping with project uncertainty in construction supply chains. Dainty, A., ed. Proceedings of the 25th Annual ARCOM Conference, Association of Researchers in Construction Management, pp. 813-822.

Hosoda, Takamichi and Disney, Stephen Michael

2009. A generalized order-up-to policy and altruistic behavior in a three-level supply chain. Dwivedi, Ashish and Butcher, Tim, eds. Supply Chain Management and Knowledge Management: Integrating Critical Perspectives in Theory and Practice, Basingstoke: Palgrave Macmillan, pp. 190-216.

Wang, Yingli

, Potter, Andrew Thomas

and Naim, Mohamed Mohamed

2009. An evaluation of electronic logistics marketplaces within supply chains. Dwivedi, Ashish and Butcher, Tim, eds. Supply Chain Management and Knowledge Management: Integrating Critical Perspectives in Theory and Practice, Basingstoke: Palgrave Macmillan, pp. 269-287.

Wells, Peter Erskine

2009. Welcome to the era of eco-austerity. Defining a Sustainable Economic Future for Wales, Cynnal Cymru, pp. 37-38.

Conference or Workshop Item

Abdel-Hamid, Radwan .H, Abu Adma, Maged A., Fahmy, Ashraf and Abdel Samed, Sherief F. 2009. Optimization of wind farm power generation using new unit matching technique. Presented at: 7th IEEE International Conference on Industrial Informatics (INDIN2009), Cardiff, Wales, 23-26 June 2009. Industrial Informatics, 2009. INDIN 2009. 7th IEEE International Conference on. pp. 378-383. 10.1109/INDIN.2009.5195834

Aljets, D., Chong, A., Wilcox, S., Holford, Karen Margaret

, Pullin, Rhys

and Eaton, Mark Jonathan

2009. Classification of delamination and matrix cracking in carbon fibre composite plates using Acoustic Emission (AE). Presented at: Proceedings of the ASME International Design Engineering Technical Conferences, and Computers and Information in Engineering Conference 2009 (DETC2009), San Diego, USA, , vol.1 pp. 29-36.

Barton, R. and Brousseau, Emmanuel Bruno Jean Paul

2009. Application of a methodology for assessing technology maturity. Presented at: Conference of the International Association for Management of Technology, (EuroMOT 2009), Glasgow, UK,

Bergada, J. M., Davies, D. L. I., Xue, Yiqin and Kumar, S. 2009. Experimental investigation in axial piston pumps barrel dynamics. Presented at: 10th International Conference on fluid control, measurements and visualisation (FLUCOME), Moscow, Russia,

Bigot, Samuel

2009. A study of specialisation and classification heuristics used in covering algorithms. Presented at: IPROM2009 Innovative Production Machines and Systems Fifth I*PROMS Virtual Conference, Cardiff, UK,

Bigot, Samuel

, Islam, N., Wong, H., Brousseau, Emmanuel Bruno Jean Paul

and Dorrington, P. 2009. Micro and nano manufacturing Technologies - Adoption Behaviour & Challenges. Presented at: 10th International Conference on Management of Innovative Technologies, Fiesa, Slovenia,

Bigot, Samuel

, Minev, R., Dobrev, T., Dimov, Stefan Simeonov and Matthews, C. 2009. Function and length scale integration in micro/nano manufacturing. Presented at: 4M2009 -First International Conference on Multi-Material Micro Manufacture, Karlsruhe, Germany, pp. 147-152.

Brousseau, Emmanuel Bruno Jean Paul

, Barton, R., Dimov, Stefan Simeonov and Bigot, Samuel

2009. Technology maturity assessment of micro and nano manufacturing processes. Presented at: 4M2009 - International Conference on Multi-Material Micro Manufacture, Karlsruhe, Germany, pp. 257-262.

Brousseau, Emmanuel Bruno Jean Paul

, Krohs, F., Dimov, Stefan Simeonov, Griffiths, C. A., Scholz, S. G., Rees, A. and Fatikow, S. 2009. Investigation of a new process chain based on atomic force microscopy scratching. Presented at: Fifth International Conference on Multi-Material Micro Manufacture, 4M2009, Karlsruhe, Germany, pp. 267-270.

Chard, J., Thomas, A. J., John, Elwyn Graham and Davies, Alan 2009. Defining a bearing replacement strategy using Monte Carlo methods. Presented at: 7th International Conference on Manufacturing Research (ICMR09), Warwick, UK, 8-10 September 2009. Proceedings of the 7th International Conference on Manufacturing Research (ICMR' 09). pp. 485-489.

Davies, Huw Charles

, Holford, Karen Margaret

, Assoune, A., Trioulier, B. and Courtney, W. 2009. Pedestrian protection using a shock absorbing liquid (SALi) based bumper system. Presented at: 21st International Technical Conference on the Enhanced Safety of Vehicles, Stuttgart, Germany, (09-002)

Davies, D. L., Watton, J., Xue, Yiqin and Williams, G. 2009. Experimental investigation into improved wrapper control of hot strip steel rolling mill downcoilers. Presented at: 2009 ASME Dynamic Systems and Control Conference, Hollywood, California, USA,

Davies, D. L. I., Watton, J., Xue, Yiqin and Williams, G. 2009. Mechanical design improvement to hot mill downcoiler. Presented at: 5th European Rolling Conference (ERC5), London, UK,

Dawoodi, A. and Evans, Samuel Lewin

2009. Effect of monomer to polymer ratio and initiator/activator ratios on mechanical and thermal characterisations of acrylic bone cement. Presented at: European Society for Biomaterials, Lausanne, Switzerland,

Dimov, Stefan Simeonov, Matthews, C. W., Brousseau, Emmanuel Bruno Jean Paul

, Bigot, Samuel

, de Grave, A., Fillon, B., Weinzierl, M., Engel, U., Johander, P., Jung, E., Kirby, P. B., Mattsson, L., Richter, M. and Schoth, A. 2009. 4M Network of Excellence, Progress Report 2009. Presented at: International Conference on Multi-Material Micro Manufacture (4M2009), Karlsruhe, Germany, pp. 1-9.

Disney, Stephen Michael

2009. Revisiting activity sampling: a fresh look at binomial proportion confidence intervals. Presented at: Logistics Research Network Annual Conference 2009, Cardiff, UK, 9-11 September 2009.

Edwards, A., Fadzli, S. A. and Setchi, Rossitza

2009. A comparative study of developing physical and digital mood boards. Presented at: 5th International Conference on Innovative Production Machines and Systems (I*PROMS'09), Cardiff, UK,

Eyers Roy, Daniel

, Dotchev, K. D. and Popov, I. 2009. Rapid manufacturing and reverse engineering: Key issues for mass customisation. Presented at: International Conference on General Machine Design, 2009.

Eyers, Daniel Roy

and Dotchev, Krassimir 2009. Rapid manufacturing for mass customisation. Presented at: Innovative Production Machines and Systems Conference (I*PROMS'09), Cardiff, UK, 2009.

Eyers, Daniel Roy

and Wang, Yingli

2009. The potential of e-commerce distribution channels for products enabled by Rapid Manufacturing. Presented at: Logistics Research Network Annual Conference, Cardiff, UK, 9-11 September 2009.

Eyers, Daniel Roy

, Wong, Hartanto and Soe, Shwe 2009. Re-articulating the role of process design to support mass customisation: The case of rapid manufactured custom-made fixtures. Presented at: 16th International EurOMA Conference, Gothenburg, Sweden, 14-17 June 2009.

Featherston, Carol Ann

, Eaton, Mark. Jonathan., Pullin, Rhys

and Holford, Karen Margaret

2009. Structural health monitoring of buckling composite structures using acoustic emission. Presented at: International Conference on Computational and Experimental Engineering Sciences, Phuket, Thailand,

Ferran, N. A., Manoj-Thomas, A., Shrama, A., Evans, Samuel Lewin

and Thomas, D. P. 2009. Factors affecting pull-out strength of cannulated cancellous bone screws. Presented at: 10th European Federation of National Associations of Orthodpedics and Traumatology (EFORT)Congress, Vienna, Austria,

Gaalman, G. G. and Disney, Stephen Michael

2009. A new inventory policy for a two echelon supply chain. Presented at: 16th EurOMA Annual Conference, Goterborg, Sweden, 14-17 June 2009.

Gosling, Jonathan

and Naim, Mohamed Mohamed

2009. Coping with project uncertainty in construction supply chains. Presented at: Association of Researchers in Construction Management (ARCOM) Annual Conference, Nottingham, UK, 7-9 September 2009. Procs 25th Annual ARCOM Conference. ARCOM, pp. 813-822.

Gosling, Jonathan

and Naim, Mohamed Mohamed

2009. Sources of project uncertainty in engineer-to-order supply chains. Presented at: 16th International Annual EurOMA Conference, Göteborg, Sweden, 14-17 June 2009.

Groves, R. B., Evans, Samuel Lewin

, Coulman, S. and BircHall, Jeremy Peter 2009. Mechanics of skin penetration by microneedles. Presented at: Third International Conference on Mechanics of Biomaterials and Tissues, Clearwater, USA,

Haliday, D. and Setchi, Rossitza

2009. A comparative study of using traditional user-centred and Kansei Engineering approaches to extract users requirements. Presented at: Innovative Production Machines and Systems Conference (I*PROMS'09), Cardiff, UK,

Hampson, Joe, MacKenzie, Neil and Walker, Helen Lisbeth

2009. Case studies in sustainable and responsible procurement. Presented at: 18th IPSERA Conference Supply Management – Towards an Academic Discipline?, Wiesbaden, Germany, 5 – 8 April 2009. Proceedings of the 18th IPSERA Conference: Supply Management – Towards an Academic Discipline?, Wiesbaden, Germany, 5–8 April 2009. International Purchasing and Supply Education and Research Association (IPSERA), pp. 1112-1123.

Harris, Irina

, Mumford, Christine Lesley

and Naim, Mohamed Mohamed

2009. The multi-objective uncapacitated facility location problem for green logistics. Presented at: IEEE Congress on Evolutionary Computation, 2009 (CEC '09), Trondheim, Norway, 18-21 May 2009. Proceedings of the IEEE Congress on Evolutionary Computation, 2009 (CEC '09). Los Alamitos, CA: IEEE, pp. 2732-2739. 10.1109/CEC.2009.4983285

Hosoda, T. and Disney, Stephen Michael

2009. Cost impact of demand process misspecification in a retailer-manufacturer supply chain. Presented at: Conference of the Japanese Operations Management and Strategy Association 2009, Tokyo, Japan,

Hosoda, T. and Disney, Stephen Michael

2009. A lagged demand supply chain. Presented at: 15th International Symposium on Inventories 2008, Budapest, Hungary, 22-26 August.

Hosoda, T. and Disney, Stephen Michael

2009. On strategy when demand information is lagged in a supply chain. Presented at: INFORMS MSOM Conference 2009, Cambridge, USA, June 28-30 2009.

John, Elwyn Graham, Davies, Alan, Hammond, J., Thomas, A. J. and Kuznecov, A. 2009. A conceptual framework for deciding upon the need for re-configurability in manufacturing systems. Presented at: 7th International Conference on Manufacturing Research (ICMR09), Warwick, UK, pp. 265-270.

John, Elwyn Graham, Davies, Alan and Thomas, A. J. 2009. A structured guide to cost effective product packaging. Presented at: The 7th International Conference on Manufacturing Research (ICMR09), Warwick, UK, pp. 260-264.

Kawashita, Luiz

, Harper, P. W., Jones, M. I., Hallett, S. R. and Wisnom, M. R. 2009. Cohesive zone implementation for modelling delamination from discontinuous plies - static and fatigue considerations. Presented at: 2nd ECCOMAS Thematic Conference on the Mechanical Response of Composites, London, UK, 1-3 April 2009.

Kempshall, P., Jemmett, P., Evans, Samuel Lewin

, Davies, P., Jones, D. A., Howes, J. and Ahuja, S. 2009. Accuracy of Jerome halo pin self-limiting torque screw drivers. Presented at: British Association of Spine Surgeons & British Cervical. Spine Society (combined annual meeting), Sheffield, UK,

Liu, H., Zhao, Y., Evans, Samuel Lewin

and Holt, Catherine Avril

2009. Applications of motion analysis system measuring micro-movements in three-dimensional space: Resolution accuracy and reliability of the optical motion capture system. Presented at: 3rd International Conference on Bioinformatics and Biomedical Engineering iCBBE 2009, Beijing, China, 11-16 June 2009. 3rd International Conference Bioinformatics and Biomedical Engineering (iCBBE 2009), Beijing, China. (516240) IEEE, pp. 2815-2818. 10.1109/ICBBE.2009.5162401

Lynch, Jane

, Mason, Robert John

, Beresford, Anthony Kenneth Charles

and Found, Pauline

2009. An exploration of the supply chain design and organisation of the UK caravan manufacturing industry. Presented at: 14th International Symposium on Logistics : Global supply chains and inter-firm networks, Istanbul, Turkey, 5-8 July 2009. Proceedings of the 14th International Symposium on Logistics (ISL 2009) Global supply chains and inter-firm networks Istanbul, Turkey 5-8 July 2009. Nottingham: Nottingham University Business School, pp. 538-546.

Mason, Robert John

, Evans, Barry Kenneth Peter and Zokaei, K. 2009. Developing a new method for measuring cycle time in grocery supply chains. Presented at: Proceedings of 14th Annual Logistics Research Network Conference, Cardiff, UK, 9-11th September 2009. pp. 929-933.

Mason, Robert John

, Evans, Barry Kenneth Peter and Zokaei, K. 2009. Developing a new method for measuring cycle time in grocery supply chains. Presented at: Logistics Research Network Annual Conference 2009, Cardiff, UK, 9-11 September 2009.

Mason, Robert John

and Purvis, Laura

2009. Exploring the challenges surrounding the management of triadic inter-organisational relationships in supply networks. Presented at: Logistics Research Network Annual Conference 2009, Cardiff, UK, 9-11 September 2009.

Nieuwenhuis, Paul Andre Henri and Wells, Peter Erskine

2009. Diversity, path dependency and the future of hydrogen fuel cell vehicles. Presented at: Hydrogen + Fuel Cells 2009 International Conference (HFC2009), Vancouver, BC, Canada, 31 May - 2 June 2009.

Oturk, H., Jones, A. M. H., Evans, Samuel Lewin

, B., Nair P. and Browne, M. 2009. Experimental and finite element corroboration of the mechanical behavior of a cementless hip replacement. Presented at: 22nd Annual Conference for the International Society for Technology in Arthroplasty, Hawaii, USA,

Owen, R. J., Porretta, S., Grosvenor, Roger Ivor

and Prickett, Paul William

2009. Upgrading the Descaling System in a Hot Rolling Mill - A Practical Method for Quantifying the Descaling Systems Reliability. Presented at: 5th European Rolling Conference, The Institute of Materials, Minerals and Mining, London, UK,

Pham, Duc Truong, Eldukhri, Eldaw Elzaki and Soroka, Anthony John

2009. Ultrasonic sensor bidirectional arc-carving mapping between grid-oriented related arcs. Presented at: Fifth I*PROMS Virtual International Conference, 6-17 July 2009. Published in: Pham, Duc Truong, Eldukhri, Eldaw Elzaki and Soroka, Anthony John

eds. Proceedings of Innovative Production Machines and Systems: Fifth I*PROMS Virtual International Conference, 6-17 July 2009. Dunbeath: Whittles Publishing, pp. 347-353.

Pham, D. T., Castellani, M. and Fahmy, Ashraf 2009. Evolutionary feature selection for artificial neural network pattern classifiers. Presented at: 7th IEEE International Conference on Industrial Informatics (INDIN2009), Cardiff, Wales, 23-26 June 2009. Industrial Informatics, 2009. INDIN 2009. 7th IEEE International Conference on. IEEE, pp. 658-663. 10.1109/INDIN.2009.5195881

Piboonrungroj, Pairach

and Disney, Stephen Michael

2009. Supply chain collaboration in tourism: a transaction cost economics perspective. Presented at: 2nd Biennial Conference of the International Association for Tourism Economics (IATE) 2009, Chiang Mai, Thailand, 11-13 December 2009.

Piboonrungroj, Pairach

and Disney, Stephen Michael

2009. Tourism supply chains: a conceptual framework. Presented at: Exploring Tourism III: Issues in PhD Research Conference, Nottingham, UK, 1-2 July 2009.

Purvis, Laura

and Naim, Mohamed Mohamed

2009. The role of intermediation in enhancing the flexibility of supply systems. Presented at: 14th International Symposium on Logistics (14th ISL), Istanbul, Turkey, 5-8 July 2009.

Ratanachote, Po-Ngarm and Disney, Stephen Michael

2009. Distribution network dynamics with correlated demands. Presented at: 16th EurOMA Annual Conference, Goteborg, Sweden, 14-17 June 2009.

Sanchez Rodrigues, Vasco Augusto

, Cowburn, J., Potter, Andrew Thomas

and Naim, Mohamed Mohamed

2009. Diagnosis of ‘extra distance’ in the UK FMCG primary transport sector. Presented at: 14th Logistics Research Network, Cardiff, UK, 9-11 Sept 2009. Proceedings of the 14th Logistics Research Network, Cardiff, UK, 9-11 September 2009. Chartered Institute of Logistics and Transport (UK), pp. 856-862.

Sanchez Rodrigues, Vasco Augusto

, Cowburn, J., Potter, Andrew Thomas

, Naim, Mohamed Mohamed

and Whiteing, A. 2009. Defining ‘extra distance’ as a measure to evaluate road transport performance. Presented at: Global supply chains and inter-firm networks, Istanbul, Turkey, 5 - 8 July 2009. Published in: Pawar, K. S. and Lalwani, C. S. eds. Proceedings of the 14th International Symposium on Logistics (14th ISL), Istanbul, Turkey, 5-8 July 2009. Nottingham: Centre for Concurrent Enterprise, Nottingham University Business School, pp. 680-687.

Sanchez Rodrigues, Vasco Augusto

, Potter, Andrew Thomas

, Naim, Mohamed Mohamed

, Schoeman, C. and Greeff, S. 2009. Diagnosis of ‘extra distance’ in the South Africa FMCG retail sector. Presented at: 20th International Conference on Production Research, Shanghai, China, 2-6 August 2009. Proceedings of the 20th International Conference on Production Research, Shanghai, China, 2-6 August 2009. International Foundation for Production Research (IFPR),

Scholz, Steffen Gerhard, Griffiths, Christian Andrew, Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul

, Lalev, Georgi Maximov and Petkov, Petko Vladev

2009. New process chains for replicating micro and nano structured surfaces with bio-mimetic applications. Presented at: Society of Plastics Engineers Annual Technical Conference (ANTEC2009), Chicago, USA, pp. 3021-3027.

Scholz, Steffen Gerhard, Petkov, Petko Vladev

, Brousseau, Emmanuel Bruno Jean Paul

, Griffiths, Christian Andrew, Hirshy, Hassan

and Dimov, Stefan Simeonov 2009. Process chain for replicating bio inspired micro structured surfaces. Presented at: 4M 2009: 6th International Conference on Multi-Material Micro Manufacture, Karlsruhe, Germany, 23-25 September 2009. Published in: Saile, V. and Ehmann, K. eds. Proceedings of 4M 2009: 6th International Conference on Multi-Material Micro Manufacture. Singapore: Research Publishing, pp. 271-274. 10.3850/4M2009RP001_9054

Setchi, Rossitza

, Tang, Q. and Bouchard, C. 2009. Ontology-based concept indexing of images. Presented at: KES 2009: 13th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems, Santiago, Chile, 28-30 September 2009. Published in: Velasquez, J. D. ed. Knowledge-Based and Intelligent Information and Engineering Systems: 13th International Conference, KES 2009, Santiago, Chile, September 28-30, 2009, Proceedings, Part I. Lecture Notes in Computer Science , vol.5711 Berlin: Springer Verlag, pp. 293-300. 10.1007/978-3-642-04595-0_36

Siddiqui, Rameez Asif, Grosvenor, Roger Ivor

and Prickett, Paul William

2009. An embedded microcontroller-based milling process management system. Presented at: INDIN 2009, 7th IEEE International Conference on Industrial Informatics, Cardiff, UK, 23-26 June 2009. 7th IEEE International Conference in Industrial Informatics (INDIN 2009) 23-26 2009 June (Cardiff, UK). Piscataway, NJ, USA: IEEE, pp. 744-749.

Siltanen, P., Tenhunen, J., Setchi, Rossitza M.

and Diaz, L. 2009. Modern technical documents for global users - usability vs efficient production. Presented at: 15th International Conference on Concurrent Enterprising, Leiden, The Netherlands,

Thomas, Andrew Jones, Davies, Alan and John, Elwyn Graham 2009. The Qualitative Characteristics of Sustainability and Resilience as required in SME Company Operations. Presented at: 7th International Conference on Manufacturing Research (ICMR09), Coventry, UK, pp. 413-418.

Valentincic, J., Bissacco, G. and Bigot, Samuel

2009. Snapshot of micro EDM technology for industry. Presented at: International Conference on Multi-Material Micro Manufacture (4M2009), Karlsruhe, Germany, pp. 415-418.

Walker, Helen Lisbeth

2009. Sustainable procurement: a literature review. Presented at: 18th IPSERA Conference: Supply Management – Towards an Academic Discipline?, Wiesbaden, Germany, 5–8 April 2009. Proceedings of the 18th IPSERA Conference: Supply Management – Towards an Academic Discipline?, Wiesbaden, Germany, 5–8 April 2009. International Purchasing and Supply Education and Research Association (IPSERA), pp. 742-756.

Walker, Helen Lisbeth

2009. Sustainable procurement: An analysis of constructs in the literature. Presented at: 16th International Annual EurOMA Conference, Gothenburg, Sweden, 14-17 June 2009.

Wells, Peter Erskine

and Faro, Thaisa 2009. Developing away from sustainability? Regional development and globalization in the Brazilian sugarcane ethanol sector. Presented at: Regional Studies Assocation, KU Leuven, Belgium, 6-9 April 2009.

Monograph

Nieuwenhuis, Paul Andre Henri Francois and Wells, Peter Erskine

2009. Car futures - rethinking the automotive industry beyond the American model. [Technical Report]. Trend Tracker. Available at: http://www.trendtracker.co.uk/store/2009/11/car-fu...

This list was generated on Mon Nov 3 17:40:09 2025 GMT.