Browse by Schools (by year)

2007. Delta T source location for acoustic emission. Mechanical systems and signal processing 21 (3) , pp. 1512-1520. 10.1016/j.ymssp.2006.05.003

Baxter, Matthew Geoffrey 2007. Damage assessment by Acoustic Emission (AE) during landing gear fatigue testing. PhD Thesis, Cardiff University.

Belcher, Raymond allan and Chambers, J. A. 2007. Non-linear crosstalk in personal computer based audio systems. Presented at: 122nd Audio Engineering Society Convention, Vienna, Austria, 5-8 May, 2007.

Bendjamin, J., Haddad, Abderrahmane

, Harid, Noureddine

, Griffiths, Huw and Ainsley, A. 2007. High-magnitude current impulse tests on a 275kV transmission tower base. Presented at: Proceedings of the XVth International Symposium on High Voltage Engineering, Ljubljana, Slovenia, (T2-443)

Benedikt, Johannes

, Qi, Hao and Tasker, Paul J

2007. Novel Nonlinear Model for Rapid Waveform-based Extraction Enabling Accurate High Power PA Design. Presented at: IEEE MTT-S International Microwave Symposium Digest 2007, 10.1109/MWSYM.2007.380246

Benedikt, Johannes

and Tasker, Paul

2007. Characterisation of high power RF transistors: Waveform measurement and engineering. Presented at: Proceedings Workshop on Advances in Active Device Characterisation and Modelling for RF and Microwave, IEEE MTT-S International Microwave Symposium,

Bennett, T. and Jefferson, Anthony Duncan

2007. Development of an experimental method to determine the effects of cross-cracking in concrete. Materials and Structures 40 (5) , pp. 491-505.

Bennett, T. and Jefferson, Anthony Duncan

2007. Experimental test and numerical modelling of hexagonal concrete specimens. Materials and Structures 40 (5) , pp. 491-505. 10.1617/s11527-006-9157-1

Berenguer, Jesús R., Bernechea, Maria

and Lalinde, Elena 2007. C–H and P–C(Ph) activation competitive processes caused by interaction with the solvate [cis-Pt(C6F5)2(thf)2]. Dalton Transactions (23) , pp. 2384-2393. 10.1039/B705041K

Berenguer, Jesús R., Bernechea, Maria

and Lalinde, Elena 2007. Rearrangement or C−H activation processes promoted by reaction with the solvate [cis-Pt(C6F5)2(thf)2]. Organometallics 26 (5) , pp. 1161-1172. 10.1021/om060977y

Bockelmann-Evans, Bettina Nicole

, Schnauder, Ingo, Fenrich, Eva K. and Falconer, Roger Alexander

2007. Development of a catchment-wide nutrient model. Water Management 160 (1) , pp. 35-42. 10.1680/wama.2007.160.1.35

Boddy, S., Rezgui, Yacine

, Cooper, G. and Wetherill, M. 2007. Computer integrated construction: A review and proposals for future directions. Advances in Engineering Software 38 (10) 10.1016/j.advengsoft.2006.10.007

Boddy, S., Rezgui, Yacine

, Wetherill, M. and Cooper, G. 2007. Knowledge informed decision making in the building lifecycle: An application to the design of a water drainage system. Automation in Construction 16 (5) , pp. 596-606. 10.1016/j.autcon.2006.10.001

Bordas, Stephane Pierre Alain

, Conley, J. G., Moran, B., Gray, J. and Nichols, E. 2007. A simulation-based design paradigm for complex cast components. Engineering with Computers 23 (1) , pp. 25-37. 10.1007/s00366-006-0030-1

Bordas, Stephane Pierre Alain

and Duflot, M. 2007. Derivative recovery and a posteriori error estimate for extended finite elements. Computer Methods in Applied Mechanics and Engineering 196 (35-36) , pp. 3381-3399. 10.1016/j.cma.2007.03.011

Bordas, Stephane Pierre Alain

, Hoppe, Ronald H. W. and Petrova, Svetozara I. 2007. Mechanical Failure in Microstructural Heterogeneous Materials. Lecture Notes in Computer Science 4310 , pp. 533-541. 10.1007/978-3-540-70942-8_64

Bordas, Stephane Pierre Alain

, Nguyen, P.V., Dunant, C., Guidoum, A. and Nguyen-Dang, H. 2007. An extended finite element library. International Journal for Numerical Methods in Engineering 71 (6) , pp. 703-732. 10.1002/nme.1966

Borodich, Feodor M.

2007. Scaling transformations in solid mechanics. Presented at: IUTAM Symposium on Scaling in Solid Mechanics, Cardiff, UK, 25-29 June 2007. Published in: Borodich, Feodor M. ed. IUTAM Symposium on Scaling in Solid Mechanics:proceedings of the IUTAM Symposium held in Cardiff, UK, 25-29 June, 2007. Proceedings of the IUTAM Symposium on Scaling in Solid Mechanics. IUTAM Bookseries (10) Springer, pp. 11-26. 10.1007/978-1-4020-9033-2_2

Borodich, Feodor M.

2007. Translation of Historical Paper: Introduction to V A Zhuravlev's 'On the question of theoretical justification of the Amontons-Coulomb law for friction of unlubricated surfaces'. Proceedings of the Institution of Mechanical Engineers Part J Journal of Engineering Tribology 221 (J8) , pp. 893-898. 10.1243/13506501JET176

Borodich, Feodor M

, Korach, C. S. and Keer, L. M. 2007. Modeling the tribochemical aspects of friction and gradual wear of diamond-like carbon films. Journal of Applied Mechanics 74 (1) , pp. 23-30. 10.1115/1.2172267

Bouchard, C., Mantelet, F., Ziakovic, D., Setchi, Rossitza

, Tang, Q. and Aoussat, A. 2007. Building a design ontology based on the conjoint trends analysis. Presented at: I*PROMS*07 Innovative Production Machines and Systems, Cardiff, UK, pp. 593-598.

Bouchard, C., Mougenot, F., Omhover, J. F., Setchi, Rossitza

and Aoussat, A. 2007. Building a domain ontology for designers: Towards a Kansei-based ontology. Presented at: I*PROMS*07 Innovative Production Machines and Systems, Cardiff, UK, pp. 587-592.

Bowen, Philip John

2007. Laminar flame propagation through methane and methane/water mixtures. Presented at: UKELG 39th Meeting: Experimental Studies in Gas Explosions, Kingston University, London, UK, 30 March 2007.

Bowen, Philip John

2007. Science and the Assembly. Presented at: RSC Science and Assembly 2007 meeting, Wales Millennium Centre / Senedd, Cardiff, UK, May 2007.

Bowen, Philip John

2007. Some Advances in Two-Phase Thermofluid Research for Environmental Protection and Pollution Reduction. Presented at: NATO Advanced Research Workshop on Advanced Pollution Reductions, Kiev, Ukraine, 15-19 May 2006. Published in: Syred, Nicholas and Khalatov, A. eds. Advanced Combustion and Aerothermal Technologies: Environmental Protection and Pollution Reductions. NATO Science for Peace and Security Series, Series C: Environmental Security (2007/3) Dordrecht: Springer, pp. 159-178. 10.1007/978-1-4020-6515-6_13

Bowen, Philip John

, Cleary, V M and Witlox, H W M 2007. Flashing liquid jets and two-phase droplet dispersion - I. Experiments for derivation of droplet atomisation correlations. Journal of Hazardous Materials 142 (3) , pp. 786-796. 10.1016/j.jhazmat.2006.06.125

Buettner, F., Spezi, Emiliano

, Paganetti, H. and Seco, J. 2007. Dosimetric uncertainties in IMRT QA in plastic phantoms due to CT calibration. Medical Physics 34 (6) , p. 2442.

Bunnori, N. M., Holford, Karen Margaret

and Lark, Robert John

2007. Acoustic emission monitoring of concrete structures suffering from reinforcement corrosion. Concrete 41 (1) , pp. 25-27.

Butcher, K S A, Fernandes, A J, Chen, P P T, Wintrebert -Fouquet, M, Timmers, H, Shrestha, S K, Hirshy, Hassan

and Perks, Richard Marc

2007. The nature of nitrogen related point defects in common forms of InN. Journal of Applied Physics 101 (12) , 123702. 10.1063/1.2736654

C

Carli, M., Sharif, Khairi, Evans, Henry Peredur

and Snidle, Raymond Walter

2007. Numerical and experimental investigation of thermo-elastohydrodynamic point contacts. Presented at: Proceedings of the Joint European Conference on Tribology (ECOTRIB07), Ljubljana, Slovenia,

Charmeux, Jean-Francois 2007. Capabilities of the Investment Casting process for producing meso/micro metal castings using Rapid Prototyping manufacturing routes. PhD Thesis, Cardiff University.

Charmeux, J.-F., Minev, R., Dimov, S., Brousseau, E.

, Minev, E. and Harrysson, U. 2007. Benchmarking of three processes for producing castings incorporating micro/mesoscale features with a high aspect ratio. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 221 (4) , pp. 577-589. 10.1243/09544054JEM693

Chen, Y. Q. and Kulasegaram, Sivakumar

2007. Numerical modelling of fracture in particulate composite using SPH method. Presented at: International Symposium on Computational Mechanics, Beijing, China,

Cheong Took, Clive. 2007. Blind source separation via independent and sparse component analysis with application to temporomandibular disorder. PhD Thesis, Cardiff University.

Chindris, M., Tomoiaga, B., Taylor, P. and Cipcigan Mirela, Liana

2007. Load flow calculation in radial electric networks with distributed generation under unbalanced and harmonic polluted regime. Presented at: 42nd Universities Power Engineering Conference, Brighton, UK.,

Choi, Heungjae

, Jeong, Yongchae and Kenney, J. Stevenson 2007. Dual-band feedforward linear power amplifier using equal group delay signal canceller. Presented at: 2007 Asia Pacific Microwave Conference, Bangkok, Thailand, 11-14 Dec 2007. 2007 Asia Pacific Microwave Conference. Picastaway, NJ: IEEE, pp. 1-4. 10.1109/APMC.2007.4555143

Choi, Heungjae

, Jeong, Yongchae, Kenney, J. Stevenson and Kim, Chul Dong 2007. Cross post-distortion balanced power amplifier. Presented at: IEEE/MTT-S International Microwave Symposium 2007, Honolulu, USA, 3-8 June 2007. IEEE/MTT-S International Microwave Symposium, 2007. Picastaway, NJ: IEEE, pp. 1115-1118. 10.1109/MWSYM.2007.380289

Cipcigan, Liana M.

, Taylor, P. and Trichakis, P. 2007. The impact of small scale wind generators on LV distribution system voltage. Presented at: 2007 International Conference on Clean Electrical Power, 21-23 May 2007. Clean Electrical Power, 2007. ICCEP '07. International Conference on. IEEE, pp. 9-13. 10.1109/ICCEP.2007.384178

Cipcigan, Liana Mirela

and Taylor, P. C. 2007. Investigation into the reverse power flow requirements of small scale energy zones connection on low voltage network. IET Renewable Power Generation 1 (3) , pp. 160-166. 10.1049/iet-rpg:20070011

Cipcigan Mirela, Liana

and Taylor, P. C. 2007. A generic model of a virtual power station consisting of small scale energy zones. Presented at: CIRED 19th International Conference on Electricity Distribution, Vienna, Austria,

Clarke, Alastair

, Sharif, Khairi, Evans, Henry Peredur

and Snidle, Raymond Walter

2007. Elastohydrodynamic modelling of heat partition in rolling-sliding point contacts. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 221 , pp. 223-235. 10.1243/13506501JET219

Cleall, Peter John

and Ding, D. 2007. Additional modelling of gas migration at Holly Lane, Erdington. [Technical Report]. Newcastle-upon-Tyne: Waterman Environmental.

Cleall, Peter John

, Seetharam, Suresh Channarayapat and Thomas, Hywel Rhys

2007. Inclusion of some aspects of chemical behaviour of unsaturated soil in thermo/hydro/chemical/mechanical models. I: Model development. Journal of Engineering Mechanics 133 (3) , pp. 338-347. 10.1061/(ASCE)0733-9399(2007)133:3(338)

Cleall, Peter John

, Seetheram, Suresh Channarayapat and Thomas, Hywel Rhys

2007. Inclusion of some aspects of chemical behaviour of unsaturated soil in thermo/hydro/chemical/mechanical models. II: Application and transport of soluble salts in compacted bentonite. Journal of Engineering Mechanics 133 (3) , pp. 348-356. 10.1061/(ASCE)0733-9399(2007)133:3(348)

Cobelo, I., Shafiu, A., Jenkins, Nicholas

and Strbac, G. 2007. State estimation of networks with distributed generation. European Transactions on Electric Power 17 (1) , pp. 21-36. 10.1002/etep.110

Collier, R.J., Edgar, D.L., Yip, J., Jastrebski, A.K., Li, D., Elgaid, K.

, McLelland, H., Ferguson, S., Williamson, F., Ross, A., Doherty, F. and Thayne, I.G. 2007. A study of high frequency performance of coplanar waveguide as a function of substrate thickness. Presented at: 30th European Microwave Conference 2000, Paris, France, 2-5 October 2000. 2000 30th European Microwave Conference. IEEE, pp. 1-3. 10.1109/EUMA.2000.338733

Crayford, Andrew Philip

, Kay, Peter John, Bowen, Philip John

, Morris, S. M., Syred, Nicholas and Roberts, P. A. 2007. Burning rate characterisation studies of alternative fuels in cloud chambers, stationary flames and new gas turbine combustion facilities. Presented at: 15th IFRF International Flame Research Foundation Members Conference, Pisa, Italy, 13-15 June 2007.

Cuerden, R., Massie, P., O'Brien, S., Davies, Huw Charles

and Edwards, M. 2007. Accident analysis for specification of Advanced European Full Width (AE-FW) Test (Aprosys Project Deliverable D123A, AP-SP12-0025). [Project Report]. Brussels: EC.

D

Davies, M., Lambotharan, S. and McWhirter, John

2007. Broadband MIMO beamforming using spatial-temporal filters and polynomial matrix decomposition. Presented at: 15th International Conference on Digital Signal Processing (DSP 2007), Cardiff, Wales,

Deshmuskh, R., Moses, Anthony John and Anayi, Fatih Jamel

2007. The chording effect on no-load losses of three-phase induction motor under sinusoidal and PWM voltage supplies. Presented at: Soft Magnetic Materials conference (SMM18), Cardiff, UK, (H-010) p. 287.

Di, Xiaojun, Moses, Anthony John and Anderson, Philip Ian

2007. A novel way of measuring DC magnetic shielding efficiency of grain oriented and non oriented electrical steel. International Journal of Applied Electromagnetics and Mechanics 25 (1-4) , pp. 219-224.

Dimov, S.S., Brousseau, E.B.

and Setchi, R. 2007. A hybrid method for feature recognition in computer-aided design models. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 221 (1) , pp. 79-96. 10.1243/09544054JEM437

Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul

and Setchi, Rossitza

2007. A hybrid method for feature recognition in CAD models. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture , pp. 79-96.

Dmitrieva, I. B., Tikhomolova, K. P., Chukhno, A. S., Prokopovich, Polina

and Starov, V. M. 2007. Investigation of the electrosurface properties of NiO and Fe2O3 in azole solutions. Colloids and Surfaces A: Physicochemical and Engineering Aspects 300 (3) , pp. 315-320. 10.1016/j.colsurfa.2007.01.046

Dorcheh, Saied Ahmad Mortazavi. 2007. Effect of rigid vegetation on the velocity, turbulence, and wave structure in open channel flows. PhD Thesis, Cardiff University.

Duan, H. L. and Karihaloo, Bhushan Lal

2007. Effective conductivities of heterogeneous media containing imperfectly-bonded multiple inclusions. Physical Review B 75 10.1103/PhysRevB.75.064206

Duan, H. L. and Karihaloo, Bhushan Lal

2007. Thermo-elastic problems in heterogeneous materials with imperfect interfaces: Generalized Levin's formula and Hill's connections. Journal of the Mechanics and Physics of Solids 55 (5) , pp. 1036-1052. 10.1016/j.jmps.2006.10.006

Duan, H. L., Karihaloo, Bhushan Lal

and Wang, J. 2007. Scaling laws for properties of materials with imperfect interfaces. Presented at: IUTAM Symposium on Scaling in Solid Mechanics, Cardiff, UK, 25-29 June 2007. Published in: Borodich, Feodor M ed. IUTAM Symposium on Scaling in Solid Mechanics: proceedings of the IUTAM Symposium held in Cardiff, UK, 25-29 June, 2007. Springer, pp. 157-163. 10.1007/978-1-4020-9033-2

Dunand, Cyril, Nguyen, Vinh Phu

, Belgasmia, Mourad, Bordas, Stephane Pierre Alain

, Guidoum, Amor and Nguyen, Hung Dang 2007. New trends in the development of the X-FEM, chapter architecture trade-offs including a mesher in an object-oriented extended finite element code. Hermes, Lavoisier.

E

Eales, R., Setchi, Rossitza

and Bouchard, C. 2007. Semantic-based approach to developing concepts in the automotive industry. Presented at: 3rd I*PROMS Virtual Conference, Cardiff, UK, 2-13 July 2007. Published in: Pham, D. T., Eldukhri, E. E. and Soroka, A. J. eds. Innovative production machines and systems:Third I*PROMS Virtual Conference, 2nd-13th July 2007. Dunbeath: Whittles Publishing, pp. 605-610.

Eaton, Mark

2007. Acoustic Emission (AE) monitoring of buckling and failure in carbon fibre composite structures. PhD Thesis, Cardiff University.

Eaton, Mark Jonathan

, Featherston, Carol Ann

and Pullin, Rhys

2007. Damage in carbon fibre composites: the discrimination of acoustic emission signals using frequency. Journal of Acoustic Emission 25 , pp. 140-148.

Eaton, Mark Jonathan

, Featherston, Carol Ann

and Pullin, Rhys

2007. An investigation of frequency as an acoustic emission signal discriminator in carbon fibre composite materials. Presented at: 6th International Conference on Acoustic Emission, (ICAE6), Lake Tahoe, Nevada, USA, pp. 312-217.

Ebrahimi, K., Falconer, Roger Alexander

and Lin, Binliang

2007. Flow and solute fluxes in integrated wetland and coastal systems. Environmental Modelling and Software 22 (9) , pp. 1337-1348. 10.1016/j.envsoft.2006.09.003

Edgar, D.L., Elgaid, K.

, Williamson, F., Ferguson, S., Ross, A., Doherty, F., Thayne, I.G., Taylor, M.R.S. and Beaumont, S.P. 2007. W-band performance of coplanar waveguide on thinned substrates. Presented at: 29th European Microwave Conference 1999, Munich, Germany, 5-7 October 1999. Proceedings of 29th European Microwave Conference 1999. IEEE, pp. 363-366. 10.1109/EUMA.1999.338569

Edwards, Paul Martin 2007. Intelligent monitoring & management of light sources. PhD Thesis, Cardiff University.

Edwards, Mervyn, Cuerden, Richard and Davies, Huw Charles

2007. Current status of the full width deformable barrier test. Presented at: 20th International Technical Conference on the Enhanced Safety of Vehicles (ESV), Lyon, France, 18-21 June 2007.

Elgaid, K.

, Thayne, I., Whyte, G., Martens, J. and Culver, D. 2007. Parasitic moding influences on coplanar waveguide passive components at G-band frequency. Presented at: 36th European Microwave Conference 2006, Manchester, England, 10-15 September 2006. 2006 European Microwave Conference. IEEE, pp. 486-488. 10.1109/EUMC.2006.281398

Elgaid, Khaled

, Edgar, David L., McCloy, David A. and Thayne, Iain G. 2007. CPW interconnects for MMIC applications on low resistivity CMOS grade silicon using micromachined SU8 negative resist. Presented at: 32nd European Microwave Conference 2002, Milan, Italy, 23-26 September 2002. p. 1. 10.1109/EUMA.2002.339431

Emery, Andrew, Davies, Anthony John, Griffiths, Anthony John and Williams, Keith Philip 2007. Environmental and economic modelling: A case study of municipal solid waste management scenarios in Wales. Resources Conservation and Recycling 49 (3) , pp. 244-263. 10.1016/j.resconrec.2006.03.016

Evans, Samuel Lewin

2007. Fatigue crack propagation under variable amplitude loading in PMMA and bone cement. Journal of Materials Science: Materials in Medicine 18 (9) , pp. 1711-1717. 10.1007/s10856-007-3021-x

Evans, Samuel Lewin

2007. Fatigue of PMMA bone cement (invited keynote presentation). Presented at: 2nd International Conference on Mechanics of Biomaterials and Tissues, Hawaii, USA,

Evans, Samuel Lewin

2007. What activities are important in the fatigue of bone cement? Presented at: 2nd International Conference on Mechanics of Biomaterials and Tissues, Hawaii, USA,

Evans, Samuel Lewin

, Mahmud, J., Ozturk, H., Saidi, K. and Shrive, N.G. 2007. Measuring the mechanical properties of skin using digital image correlation and nonlinear finite element analysis. Presented at: 2nd International Conference on Mechanics of Biomaterials and Tissues, Hawaii, USA,

Evans, Samuel Lewin

, Brousseau, Emmanuel Bruno Jean Paul

, Ozturk, H., Saidi, K. and Shrive, N.G. 2007. Measuring soft tissue properties using digital image correlation and finite element modelling. Presented at: 13th International Conference on Experimental Mechanics, Alexandropolis, Greece,

F

Falconer, Roger Alexander

, Lin, BinLiang

and Liang, D. 2007. Modelling extreme flood events and water quality indicator levels in riverine basin environments. Presented at: Proceedings of 2nd International Conference on Managing Rivers in the 21st Century, Kuching, Malaysia, Kuching, Malaysia, REDAC and USM Press,

Farhat, F. A., Nicolaides, D., Kanellopoulos, A. and Karihaloo, Bhushan Lal

2007. High performance fibre-reinforced cementitious composite (CARDIFRC) - Performance and application to retrofitting. Engineering Fracture Mechanics 74 (1-2) , pp. 151-167. 10.1016/j.engfracmech.2006.01.023

Featherston, Carol Ann

2007. Smart meshing of imperfect structures for the improved prediction of buckling and postbuckling behaviour. Presented at: 13th International Conference on Experimental Mechanics, Alexandroupolis, Greece,

Featherston, Carol Ann

and Watson, A. 2007. Multilevel optimization of composite panels under complex load and boundary conditions. Structural and Multidisciplinary Optimization 36 (1) , pp. 15-27. 10.1007/s00158-007-0181-8

Feng, C., Liang, Jun

and Agelidis, V.G. 2007. Modified phase-shifted PWM control for flying capacitor multilevel converters. IEEE Transactions on Power Electronics 22 (1) , pp. 178-185. 10.1109/TPEL.2006.886600

Ferri, C. and Brousseau, Emmanuel Bruno Jean Paul

2007. Critical analysis of an existing calibration procedure built in a white light interferometer microscope and proposal of an alternative spline-based approach. Presented at: 3rd International Conference on Multi-Material Micro Manufacture, Borovets, Bulgaria, 3-5 October 2007. Published in: Dimov, S., Menz, W. and Toshev, Y. eds. 4m 2007 : third International Conference on Multi-material Micro Manufacture : 3rd-5th October 2007, Borovets, Bulgaria. Dunbeath: Whittles, pp. 169-172.

Foster, J., McWhirter, John

and Chambers, J. A. 2007. An algorithm for computing the QR decomposition of a polynomial matrix. Presented at: 15th International Conference on Digital Signal Processing (DSP 2007), Cardiff, Wales, 1-4 July 2007. Digital Signal Processing, 2007- 15th International Conference (DSP 2007) (Cardiff, UK). IEEE, 71 - 74. 10.1109/ICDSP.2007.4288521

Foster, J., McWhirter, John

and Chambers, J. A. 2007. A polynomial matrix QR decomposition with application to MIMO channel equalisation. Presented at: 41st Asilomar Conference on Circuits, Signals Systems and Computers (invited paper) (ACSSC 2007), Pacific Grove, California, USA,

G

Gaddi, R., Williams, T., Benedikt, Johannes

, Tasker, Paul

, Giacomozzi, F., Margesin, B. and Gnudi, A. 2007. Large-Signal Vectorial Load - Pull Characterization of MEMS RF-Actuation. IEEE Microwave and Wireless Components Letters 17 (12) , pp. 903-905. 10.1109/LMWC.2007.908049

Gao, G., Falconer, Roger Alexander

and Lin, BinLiang

2007. Numerical modelling of sediment effects on fate and transport of faecal bacteria in surface water. Presented at: Proceedings of 32nd IAHR Congress, Venice, Italy, (B2.b) pp. 1-10.

Gardner, Diane Ruth

, Lark, Robert John

and Barr, B. 2007. The effect of conditioning to a predetermined weight loss on the permeability of concrete. Construction and Building Materials 21 (1) , pp. 83-89. 10.1016/j.conbuildmat.2005.07.005

Geyer, R., Davis, J., Ley, J., He, J., Clift, R., Kwan, Alan Shu Khen

, Sansom, M. and Jackson, T. 2007. Time-dependent material flow analysis of iron and steel in the UK: Part 1: Production and consumption trends 1970-2000. Resources, Conservation and Recycling 51 (1) , pp. 101-117. 10.1016/j.resconrec.2006.08.006

Geyer, R., Davis, J., Ley, James D., He, J., Clift, R., Kwan, Alan Shu Khen

, Sansom, M. and Jackson, T. 2007. Time-dependent material flow analysis of iron and steel in the UK: Part 2. Scrap generation and recycling. Resources, Conservation and Recycling 51 (1) , pp. 118-140. 10.1016/j.resconrec.2006.08.007

Ghanbarzadeh, Afshin 2007. the Bees Algorithm: a novel optimisation tool. PhD Thesis, Cardiff University.

Ghodsi, M., Hassani, H., Sanei, S. and Hicks, Yulia Alexandrovna

2007. A new approach in detection of temporomandibular disorder using singular spectrum analysis. Presented at: Proceedings IEEE (ICSPC07), Dubai, UAE,

Ghodsi, M., Sanei, S. and Hicks, Yulia Alexandrovna

2007. Detection of temporomandibular disorder from facial pattern. Presented at: Proceedings of 15th International Conference on Digital Signal Processing (DSP 2007), Cardiff, Uk,

Ghodsi, M., Sanei, S., Hicks, Yulia Alexandrovna

, Lee, T. and S., Dunne 2007. A facial pattern recognition approach for detection of temporomandibular disorders. Presented at: 15th European Signal Processing Conference (EUSIPCO 2007), Poznan, Poland,

Ghomeshi, M., Mortazavi-Dorcheh, S. A. and Falconer, Roger Alexander

2007. Amplitude of wave formation by vortex shedding in open channels. Journal of Applied Sciences 7 (24) , pp. 3927-3934. 10.3923/jas.2007.3927.3934

Glendinning, Mark Charles 2007. Modelling the freezing and thawing behaviour of saturated soils. PhD Thesis, Cardiff University.

Goeritz, R., Masood, A., Castell, O., Barrow, David Anthony

, Allender, C. and Porch, Adrian

2007. Microwave compositional analysis of solvent matrices in microcapillary manifold systems. Presented at: Proc. 11th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2007), Paris, France, pp. 1689-1691.

Goncalves, L. M., Rocha, J. G., Couto, C., Alpium, P., Min, Gao

, Rowe, David Michael and Correia, J. H. 2007. Fabrication of flexible thermoelectric microcoolers using planar thin-film technologies. Journal of Micromechanics and Microengineering 17 (7) , S168–S173. 10.1088/0960-1317/17/7/S14

Griffiths, C. A., Dimov, S. S., Brousseau, E. B.

and Hoyle, R. T. 2007. The effects of tool surface quality in micro injection moulding. Journal of Materials Processing Technology 189 (1-3) , pp. 418-427. 10.1016/j.jmatprotec.2007.02.022

Griffiths, Anthony John and Williams, Keith Philip 2007. Reduction and treatment of waste in power generation. Syred, N. and Khalatov, A., eds. Advanced Combustion and Aerothermal Technologies, NATO Science for Peace and Security Series - C: Environmental Security, Dordrecht: Springer, pp. 259-271.

Griffiths, C. A., Bigot, Samuel

, Worgull, M., Heckele, M., Nestler, J. and J., Auerswald 2007. Polymer insert tooling for prototyping of micro fluidic components in micro injection moulding. Presented at: 3rd International Conference on Multi-Material Micro Manufacture, Borovets, Bulgaria, 3-5 October 2007. Published in: Dimov, S., Menz, W. and Toshev, Y. eds. Proceedingsof the 3rd International Conference on Multi-Material Micro Manufacture (4M2007), Borovets, Bulgaria. pp. 305-308.

Guo, D., Hauser-Ehninger, U., Griffiths, Huw, Haddad, Abderrahmane

, Ainsley, A., Ainslie, F. and D., Frame 2007. A technique for the continuous condition monitoring of substation earthing systems. Presented at: Proceedings of the 15th International Symposium on High Voltage Engineering, Ljubljana, Slovenia, (T2-445) pp. 1-6.

Guo, D., Lathi, Deepak, Harid, Noureddine

, Griffiths, Huw, Haddad, A and Ainsley, A. 2007. Large-scale earthing test facilities at Dinorwig power station. Presented at: International Conference on Condition Monitoring and Diagnosis (CMD 2008), Beijing, China, 21-24 April 2008. International Conference on Condition Monitoring and Diagnosis, 2008. CMD 2008. PROCEEDINGS OF 2008 INTERNATIONAL CONFERENCE ON CONDITION MONITORING AND DIAGNOSIS. IEEE, pp. 808-811.

H

Haddad, Abderrahmane

, Chrzan, K., Griffiths, Huw and RT., Waters 2007. A new approach to anti-fog design for polymeric insulators. Presented at: Proceedings of the 15th International Symposium on High Voltage Engineering, Ljubljana, Slovenia, (T2446) pp. 1-6.

Haddad, Abderrahmane

, Griffiths, Huw and RT., Waters 2007. Principles of anti-fog design for polymeric insulators. Presented at: IEEE International Conference on Solid Dielectrics (ISCD '07), Winchester, UK, pp. 302-305.

Hadimani, M., Jiles, David, Melikhov, Yevgen

and Snyder, John Evan 2007. Magnetic refrigeration using Gd5(SixGel-x)4. Presented at: Speaking of Science 2007, Cardiff, UK,

Hadimani, R. L., Jiles, David, Melikhov, Yevgen

and Snyder, John Evan 2007. Determination of the projected second order phase transition temperature of the orthorhombic phase of Gd5(SixGel-x)4. Presented at: 52nd Magnetism and Magentic Materials Conference (MMM), Tampa, USA,

Hadimani, R., Jiles, David, Melikhov, Yevgen

and Snyder, John Evan 2007. Estimation of first order and second order phase transition temperatures in Gd5(SixGel-x)4. Presented at: Soft Magnetic Materials (SMM)18, Cardiff, UK,

Hakimzadeh, H. and Falconer, Roger Alexander

2007. Layer integrated modeling of three dimensional recirculating flows in model tidal basins. Journal of Waterway, Port, Coastal and Ocean Engineering 133 (5) , pp. 324-333. 10.1061/(ASCE)0733-950X(2007)133:5(324)

Hall, Jeremy Peter, Moses, Anthony John and D., Snell 2007. A magnetic method for detection of residual curvature in electrical steel strip. Presented at: The 4th International Conference of Non-Destructive Testing (4th ICNDT), Crete, Greek,

Harbottle, Michael John

and Al-Tabbaa, A. 2007. Uncovering the true impacts of remediation. [Technical Report]. SUBR:IM Bulletin, vol. SUB 02. London: CL:AIRE. Available at: http://www.claire.co.uk/index.php?option=com_phoca...

Harbottle, Michael John

, Al-Tabbaa, A and Evans, C. W. 2007. A comparison of the technical sustainability of in situ stabilisation / solidification with disposal to landfill. Journal of Hazardous Materials 141 (2) , pp. 430-440. 10.1016/j.jhazmat.2006.05.084

Harbottle, Michael John

, Mantle, Michael D., Johns, Michael L., van Herwijnen, Rene, Al-Tabbaa, Abir, Hutchings, Tony R., Moffat, Andy J. and Ouki, Sabeha K. 2007. Magnetic resonance imaging of the effect of zeolite on lithium uptake in poplar. Environmental Science & Technology 41 (10) , pp. 3444-3448. 10.1021/es0623111

Harid, Noureddine

, Griffiths, Huw and Haddad, Abderrahmane

2007. Computation model for ground potential and current distribution in ground impedance measurements at high-voltage towers. Presented at: 42nd Universities Power Engineering Conference, Brighton, UK., 4-6 September 2007. Universities Power Engineering Conference, 2007. UPEC 2007. 42nd International. 2007 42nd International Universities Power Engineering Conference, Vols 1-3. , vol.1-3 IEEE, pp. 806-811.

Harid, Noureddine

, Griffiths, Huw and Haddad, Abderrahmane

2007. Computation model for ground potential and current distribution in ground impedance measurements at high-voltage towers. Presented at: 42nd International Universities Power Engineering Conference IUEPC2007, Brighton, UK, pp. 806-811.

Harid, Noureddine

, Griffiths, Huw, Haddad, Abderrahmane

and A., Ainsley 2007. Factors affecting impedence measurement of transmission line earthing systems. Presented at: Proceedings of the 15th International Symposium on High Voltage Engineering, Ljubljana, Slovenia, (T2-444) pp. 1-6.

Harker, B. J., Dobrosavljevic, Z., Craney, E. P., Miles, S., Belcher, Raymond Allan and Chambers, J. 2007. Dynamic Range Enhancements in Radar Sensors PAPER A23. Presented at: 4th EMRS DTC conference, Edinburgh, July 2007.

Hashmi, M. S., Hashim, S. J., Williams, T., Benedikt, Johannes

and Tasker, Paul

2007. A broadband control electronics for envelope load pull system. Presented at: International Symposium on Signals, Systems and Electronics (ISSSE07), Montreal, Canada, pp. 197-200. 10.1109/ISSSE.2007.4294447

Hauser, H., Melikhov, Yevgen

and Jiles, David 2007. Including effects of microstructure and anisotropy in theoretical models describing hysteresis of ferromagnetic materials. Applied Physics Letters 91 (17) , 172512. 10.1063/1.2802556

Hauser, H., Melikhov, Yevgen

and Jiles, David 2007. The inner demagnetizing factor in hysteresis models. Presented at: 6th International Symposium on Hysteresis Modeling and Micromagnetics (HMM-2007), Naples, Italy,

Haynes, Jonathan Mark 2007. Axial piston pump leakage modelling and measurement. PhD Thesis, Cardiff University.

Hewings, G., Griffiths, Anthony John and Williams, Keith Philip 2007. Calculating airflow requirements for forced aerated composting systems. Presented at: 22nd Solid Waste Technology and Management Conference 2007, Philadelphia, USA, pp. 178-180.

Hewings, Guy 2007. Design and management of composting systems. PhD Thesis, Cardiff University.

Higham, T. F. G., Bronk Ramsey, C. and Nokes, Leonard Derek Martin

2007. AMS radiocarbon dating of bones from St David's Cathedral. Evans, J. Wyn and Wooding, J. M., eds. St David of Wales: Cult, Church and Nation, Studies in Celtic History, vol. 24. Woodbridge, Suffolk: Boydell Press, pp. 282-285.

Hiller, K., Nestler, J., Gessner, T., Gavillet, J., Getin, S., Quesnel, E., Martin, S., Delapierre, G., Soechtig, J., Voirin, G., Buergi, L., Auerswald, J., Knapp, H. F., Stanley, R., Bigot, Samuel

, Dimov, S., Ehrat, M., Lieb, A., Beckers, M. C., Dresse, D. and Victor-Pujebet, E. 2007. Integration aspects of a polymer based SPR biosensor with active micro optical and micro fluidic elements. Presented at: Smart Systems Integration 2007, Paris, France, 27-28 March 2007.

Holford, Karen Margaret

, Pullin, Rhys

and M., Baxter 2007. Current practice and applications of acoustic emission. Presented at: 13th International Conference on Experimental Mechanics (ICEM 13), Alexandroupolis, Greece,

Holt, Catherine Avril

, Whatling, Gemma Marie

, Jones, L. and Evans, Samuel Lewin

2007. The biomechanics of stair climbing for patients with advanced knee osteoarthritis. Presented at: 6th Combined Meeting of the Orthopaedic Research Societies (ORS), Honolulu, Hawaii, (242)

Howson, William Paul and Rafezy, B 2007. Exact dynamic stiffness matrix for a thin-walled beam of doubly asymmetric cross-section filled with shear sensitive material. International Journal for Numerical Methods in Engineering 69 (13) , pp. 2758-2779. 10.1002/nme.1864

Hudson, A. J., Stevenson, R. M., Bennett, Anthony

, Young, R. J., Nicoll, C. A., Atkinson, P., Cooper, K., Ritchie, D. A. and Shields, A. J. 2007. Coherence of an entangled exciton-photon state. Physical Review Letters 99 (26) , 266802. 10.1103/PhysRevLett.99.266802

I

Ivanov, A., Ferri, C., Petrelli, A. and Popov, Krastimir Borisov 2007. Electrode wear ratio and its effects on process modelling and process Capability. Presented at: Proceedings of the 3rd Virtual International Conference on Intelligent Production Machines and Systems (IPROMS2007), Whittles, UK, Published in: Pham Eldukhri,, Duc Truong ed. Elsevier (Oxford),

J

Jefferson, Anthony Duncan

and Bennett, Terry 2007. Micro-mechanical damage and rough crack closure in cementitious composite materials. International jJournal for Numerical and Analytical Methods in Geomechanics 31 (2) , pp. 133-146. 10.1002/nag.551

Jeong, Sigyun, Choi, Heungjae

, Jeong, Yongchae, Kenney, J. Stevenson and Kim, Chuldong 2007. High efficiency distributed amplifier using optimum transmission line. Presented at: 2007 European Microwave Conference, Munich, 9-12 October 2007. 2007 European Microwave Conference. Picastaway: IEEE, pp. 1085-1088. 10.1109/EUMC.2007.4405386

Jeong, Sigyun, Choi, Heungjae

, Jeong, Yongchae, Kenney, J. Stevenson and Kim, Chuldong 2007. High efficiency distributed amplifier using optimum transmission line. Presented at: European Microwave Integrated Circuits Conference (EUMIC), Munich, Germany, 8-10 October 2007. 2007 European Microwave Integrated Circuits Conference. Picastaway, NJ: IEEE, pp. 287-290. 10.1109/EMICC.2007.4412705

Jeong, Sigyun, Choi, Heungjae

, Jeong, Yongchae, Kenney, J. Stevenson and Kim, Chuldong 2007. High efficiency distributed amplifier using optimum transmission line. Presented at: European Conference on Wireless Technologies (ECWT), Munich, Germany, 8-10 October 2007. 2007 European Conference on Wireless Technologies. Picastaway, NJ: IEEE, pp. 367-370. 10.1109/ECWT.2007.4404023

Ji, Ze

2007. Development of tangible acoustic interfaces for human computer interaction. PhD Thesis, Cardiff University.

Jiles, David 2007. Introduction to the principles of materials evaluation. Boca Raton, Florida: Taylor and Francis.

Jiles, David 2007. Magnetic methods for determination of radiation embrittlement, creep and fatigue in ferrous materials. Presented at: 2th Electromagnetic Non-destructive Evaluation Conference (ENDE), Cardiff, UK,

Jiles, David 2007. Nondestructive evaluation of steels using magnetic methods. Presented at: International Symposium on Advances in Stainless Steel, Chennai, India,

Jiles, David and Melikhov, Yevgen

2007. Modeling of non-linear behaviour and hysteresis in magnetic materials. Kronmuller, H. and Parkin, S., eds. Handbook of Magnetism and Advanced Magnetic Materials, Vol. 2. Chichester: John Wiley & Sons Scientific Publishers, pp. 1059-1079.

Jing, Min and Sanei, Saeid 2007. A novel constrained topographic independent component analysis for separation of epileptic seizure signals. Computational Intelligence and Neuroscience 2007 , 21315. 10.1155/2007/21315

John, Elwyn Graham, Davies, Alan, Thomas, A. J. and Worrall, B. 2007. Strategy identification via numerical situation analysis. Presented at: 37th conference on Computers and Industrial Engineering (CIE37), Alexandria, Egypt, pp. 676-670.

John, Gareth, Narracott, Andrew J., Morris, Rhys J.

, Woodcock, John Patrick, Lawford, Patricia V. and Hose, D. Rodney 2007. Influence of intermittent compression cuff design on interface pressure and calf deformation: experimental results. Presented at: 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Lyon, France, 23-26 August 2007. IEEE, pp. 2122-2125. 10.1109/IEMBS.2007.4352741

Jones, M. D., Holt, Catherine Avril

and Whatling, Gemma Marie

2007. Developing a methodology for the analysis of infant spine kinematics for the investigation of the shaken baby syndrome. Presented at: 16th annual meeting of ESMAC (European Society of Movement Analysis for Adults and Children)., Athens, Greece, (P030) Gait & Posture,

Jones, Michael David

and Whatling, Gemma Marie

2007. Developing a methodology for the analysis of infant spine kinematics for the investigation of the Shaken Baby Syndrome [Abstract]. Gait & Posture 26 (S1) , S74. 10.1016/S0966-6362(07)80010-5

K

Karihaloo, Bhushan Lal

and Farhat, F. A. 2007. RC beams retrofitted with CARDIFRC- behaviour after thermal cycling. Presented at: 5th International Symposium on High Performance Fiber Reinforced Cementitious Composites (HPFRCC5), Paris, France, Published in: Reinhardt H W, Naaman A ed. RILEM, pp. 409-418.

Karihaloo, Bhushan Lal

and Xiao, Q. Z. 2007. Accurate simulation of frictionless and frictional cohesive crack growth in quasi-brittle materials using XFEM. Presented at: Proceedings of the conference on Fracture Mechanics of Concrete Structures (FRAMCOS6), Catania, Italy, Published in: Carpinteri A Ferro G,, Gambarova P ed. , vol.1 Taylor and Francis, pp. 99-110.

Karihaloo, Bhushan Lal

and Xiao, Q. Z. 2007. Asymptotic fields at the tip of a cohesive crack. Presented at: Proceedings ICF International Congress on Fracture Interquadrennial Conference on Fracture Mechanics in Design of Fracture Resistant Materials and Structures, Moscow, Russia, Published in: V, Goldstein R ed. Make Press,

Karihaloo, Bhushan Lal

and Xiao, Q. Z. 2007. The role of asymptotic crack top fields in linear and cohesive materials. JP Journal of Solids and Structures 1 (2) , pp. 93-124.

Karihaloo, Bhushan Lal

and Xiao, Q 2007. Implementation of hybrid crack element on a general finite element mesh and in combination with XFEM. Computer Methods in Applied Mechanics and Engineering 196 (13-16) , pp. 1864-1873. 10.1016/j.cma.2006.09.022

Kashefipour, S. M., Tavakoki, A. A. and Falconer, Roger Alexander

2007. Water quality modelling by numerical solution of ADE using an integrated model. Asian Journal of Water, Environment and Pollution 4 (2) , pp. 11-15.

Kennedy, David

, Fischer, M. and Featherston, Carol Ann

2007. Recent developments in exact strip analysis and optimum design of aerospace structures. Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science 221 (4) , pp. 399-413. 10.1243/0954406JMES432

Kerfriden, Pierre

, Allix, O. and Gosselet, P. 2007. Adaptation d'une strategie de calcul multiechelle pour les calculs de delaminage dans le composites stratifies. Presented at: 18eme Congres Francais de Mecanique (CFM 2007), Grenoble, France,

Kettle, J., Lalev, G., Dimov, Stefan Simeonov and Perks, Richard Marc

2007. Fabrication of lenses for AlGaInP LEDs using step and flash imprint lithography. Presented at: Proceedings of the 7th IEEE International Conference on Nanotechnology, Hong Kong, pp. 49-52. 10.1109/NANO.2007.4601138

Kettle, J., Perks, Richard Marc

, Lalev, G. and Dimov, Stefan Simeonov 2007. Electroluminescence response of plasmonic AlGaInP light emitting diodes. Presented at: Proceedings of the 7th IEEE International Conference on Nanotechnology, Hong Kong, pp. 678-680. 10.1109/NANO.2007.4601280

Khan, W. S., Jones, R. K., Nokes, Leonard Derek Martin

and Johnson, D. S. 2007. How to best immobilise extensor mechanism injuries of the knee: A gait analysis study. Presented at: 53rd Annual Meeting of the Orthopaedic Research Society, San Diego, USA, (139)

Khan, W. S., Nokes, Leonard Derek Martin

, Jones, R. and Johnson, D. S. 2007. The Relationship of the Angle of Immobilisation of the Knee to the Force Applied to the Extensor Mechanism When Partially Weight Bearing. Journal of Bone and Joint Surgery 89-B (7) , pp. 911-914. 10.1302/0301-620X.89B7.18452

Kondoh, J., Shafiu, A., Wu, Jianzhong

and Jenkins, Nicholas

2007. Load management on small-scale customers. Presented at: Technical Meeting on Metabolism Society and Environmental Systems,

Krieble, K., Devlin, M., ST., Aldini, Lee, S. J. and Snyder, John Evan 2007. Investigation of Ga substitution in Cobalt-Ferrite (CoGaxFe2-xO4) using Mossbauer spectroscopy. Presented at: Proceedings of the 52nd Conference on Magnetism and Magnetic Materials, Tampa, FL,

Kuball, M., Riedel, G. J., Pomeroy, J. W., Sarua, A., Uren, M. J., Martin, T., Hilton, K. P., Maclean, J. O. and Wallis, David

2007. Time-resolved temperature measurement of AlGaN/GaN electronic devices using micro-raman spectroscopy. IEEE Electron Device Letters 28 (2) , pp. 86-89. 10.1109/LED.2006.889215

L

Lagos, Nikolaos 2007. Knowledge-based product support systems. PhD Thesis, Cardiff University.

Lagos, N. and Setchi, Rossitza

2007. A manufacturing ontology for e-learning. Presented at: I*PROMS*07 Innovative Production Machines and Systems, Cardiff, UK, 2-13 July 2007. Proceedings of the I*PROMS*07, 2-13 July 2007, Cardiff, UK. Whittles, pp. 552-557.

Lear, G., Harbottle, Michael John

, Sills, G. C., Knowles, C. J., Semple, K. T. and Thompson, I. P. 2007. Impact of electrokinetic remediation on microbial communities within PCP contaminated soil. Environmental Pollution 146 (1) , pp. 139-146. 10.1016/j.envpol.2006.06.037

Lee, S. J., Song, S. H. and Jiles, David 2007. Magneto-optic properties of Co1+GexFe2-2xO4. Presented at: American Physical Society March Meeting, Denver, USA, March 5-9, 2007.

Lee, S. J., Lo, C. C. H., Matlage, P. N., Song, S. N., Melikhov, Yevgen

, Snyder, John Evan and Jiles, David 2007. Magnetic and magnetoelastic properties of Cr-substituted cobalt ferrite. Journal of Applied Physics 102 (7) , 073910. 10.1063/1.2794711

Lee, S. J., Song, S. H., Lo, C. C. H., Aldini, S. T. and Jiles, David 2007. Magneto-optic properties of CoFe2-xGaxO4. Journal of Applied Physics 101 (9) , pp. 502-503. 10.1063/1.2693953

Leicht, J., Moses, Anthony John and Zurek, S. 2007. Hysteresis loss component under non-sinusoidal flux waveform in electrical steels. Presented at: Soft Magnetic Materials Conference (SMM18), Cardiff, UK, (C-003) p. 234.

Li, Ming, Fernando, Premanandan T., Pan, Shunqi

, O'Connor, B. A. and Chen, Daoyi 2007. Development of a quasi-3d numerical model for sediment transport prediction in the coastal region. Journal of Hydro-environment Research 1 (2) , pp. 143-156. 10.1016/j.jher.2007.09.001

Liang, D., Falconer, Roger Alexander

, Jiang, C. and Wang, X. 2007. Numerical simulation of flood flows due to levee breaches. Presented at: 32nd IAHR The International Association for Hydro-Environment Engineering and Research Congress, Venice, Italy, Proceedings of the 32nd IAHR The International Association for Hydro-Environment Engineering and Research Congress, Venice , Italy.

Liang, D., Lin, BinLiang

2007. A boundary-fitted numerical model for flood routing with shock capturing. Journal of Hydrology 332 (03-Apr) , pp. 477-486.

Liang, D., Lin, BinLiang

2007. Linking one- and two-dimensional models for free surface flows. Proceedings of the Institution of Civil Engineers Water Management 160 (3) , pp. 145-151.

Liang, D., Lin, BinLiang

2007. Simulation of rapidly varying flow using an efficient TVD-MacCormack scheme. International Journal of Numerical Methods in Fluids 53 (5) , pp. 811-826.

Liang, D., Lin, BinLiang

2007. Two dimensional flood routing in an urban environment. Presented at: 3rd National Conference on Hydraulics and Hydroinformatics, Nanjing, China, Proceedings of 3rd National Conference on Hydraulics and Hydroinformatics, Nanjing, China. Hohai University Press, pp. 550-556.

Liang, Dongfang, Falconer, Roger Alexander

and Lin, BinLiang

2007. Coupling surface and subsurface flows in a depth averaged flood wave model. Journal of Hydrology 337 (1-2) , pp. 147-158. 10.1016/j.jhydrol.2007.01.045

Liang, Jun

and Feng, C. M. 2007. Stability improvement of micro-grids with coordinate control of fuel cell and ultracapacitor. Presented at: IEEE 38th Power Electronics Specialist Conference (PESC07), Orlando, U.S.A,

Lin, Jian-guo, Xie, Zhihua

and Zhou, Jun-tao 2007. Three-point explicit compact difference scheme with arbitrary order of accuracy and its application in CFD. Applied Mathematics and Mechanics 28 (7) , pp. 943-953. 10.1007/s10483-007-0711-x

Lin, Jianguo, Xie, Zhihua

and Zhou, Juntao 2007. High-order compact difference scheme for the regularized long wave equation. Communications in Numerical Methods in Engineering 23 (2) , pp. 135-156. 10.1002/cnm.892

Lin, Jianguo, Xie, Zhihua

and Zhou, Juntao 2007. High-order compact scheme and its stability analysis for the pollutant diffusion equation. Chinese Journal of Computational Mechanics 26 , pp. 790-794.

Liu, Huimin. 2007. Knowledge-based inventive conceptual design. PhD Thesis, Cardiff University.

Liu, Helen, Holt, Catherine Avril

, Packianather, Michael Sylvester

2007. Accuracy and repeatability of an optical motion analysis system for measuring small deformations of biological tissues. Journal of Biomechanics 40 (1) , pp. 210-214. 10.1016/j.jbiomech.2005.11.007

Liu, Jun

, Liu, Changqing and Conway, Paul P. 2007. Crystallographic features of copper column growth by reversible pulse current electrodeposition. Presented at: IEEE 57th Electronic Components and Technology Conference (ECTC 2007), Reno, NV, USA, 29 May - 1 June 2007. 2007 Proceedings 57th Electronic Components and Technology Conference. IEEE, pp. 892-897. 10.1109/ECTC.2007.373904

Liu, W., Weiss, S., McWhirter, John

and Proudler, I. K. 2007. Frequency invariant beamforming for two-dimensional and three-dimensional arrays. Journal of Signal Processing 87 (11) , pp. 2535-2543. 10.1016/j.sigpro.2007.03.018

Liu, Ying

and Loh, Han Tong 2007. Corpus building for corporate knowledge discovery and management: A case study of manufacturing. Knowledge-Based Intelligent Information and Engineering Systems, Vol. 4692. Springer, pp. 542-550. (10.1007/978-3-540-74819-9_67)

Liu, Ying

and Loh, Han Tong 2007. A simple probability based term weighting scheme for automated text classification. Presented at: 20th International Conference on Industrial, Engineering and Other Applications of Applied Intelligent Systems (IEA/AIE 2007), Kyoto, Japan, 26-29 June 2007. Published in: Okuno, Hiroshi G. and Ali, Moonis eds. New Trends in Applied Artificial Intelligence: 20th International Conference on Industrial, Engineering and Other Applications of Applied Intelligent Systems, IEA/AIE 2007, Kyoto, Japan, June 26-29, 2007. Proceedings. Lecture Notes in Computer Science (4570) Berlin Heidelberg: Springer, pp. 33-43. 10.1007/978-3-540-73325-6_4

Liu, Ying

, Loh, Han Tong, Kamal, Youcef-Toumi and Tor, Shu Beng 2007. Handling of imbalanced data in text classification: category-based term weights. Kao, Anne and Poteet, Stephen R., eds. Natural Language Processing and Text Mining, London: Springer, pp. 171-192. (10.1007/978-1-84628-754-1_10)

Lo, C. C. H., Snyder, John Evan, Ring, A. P., Melikhov, Yevgen

, Matlage, P. and Jiles, David 2007. Improvement of magnetomechanical properties of cobalt ferrite for stress sensor applications. Presented at: Review of Progress in Quantitative NDE Nondestructive Evaluation, Portland, OR, USA, 30 July-4 August 2006. Review of Progress in Quantitative NDE Nondestructive Evaluation. AIP Conference Proceedings (894) American Institute of Physics, pp. 942-948. 10.1063/1.2718069

Lodhi, T., McLelland, H., Elgaid, K.

, Ferguson, S., Edgar, D. L. and Thayne, I. G. 2007. InP-based W-band coplanar waveguide couplers. Presented at: 29th European Microwave Conference 1999, Munich, Germany, 5-7 October 1999. 1999 29th European Microwave Conference. IEEE, pp. 250-253. 10.1109/EUMA.1999.338320

Loudyi, D., Falconer, Roger Alexander

and Lin, BinLiang

2007. Mathematical development and verification of a non-orthogonal finite volume model for groundwater applications. Advances in Water Resources 38 (1) , pp. 29-42. 10.1016/j.advwatres.2006.02.010

M

Malki, R. A., Wilson, Catherine

and Aberle, J. 2007. The effects of saltmarsh plants on drag forces and shear stresses. Presented at: 32nd IAHR Congress Conference Proceedings, Venice, Italy.,

Mann, David G., Bayer, Misha M., Droop, Stephen J. M., Hicks, Yulia Alexandrovna

, Marshall, Andrew David

, Martin, Ralph Robert and Rosin, Paul L.

2007. New methods for preparing, imaging and typifying desmids (Chlorophyta, Zygnematophyceae), including extended depth of focus and 3-D reconstruction. Phycologia 46 (1) , pp. 29-45. 10.2216/04-60.1

Mansergh, Fiona Catherine, Wells, Timothy

, Elford, Carole, Evans, Samuel Lewin

, Evans, Martin John, Perry, Mark J. and Evans, Bronwen Alice James

2007. Osteopenia in Sparc (osteonectin) deficient mice: characterization of phenotypic determinants of femoral strength and changes in gene expression. Physiological genomics 32 (1) , pp. 64-73. 10.1152/physiolgenomics.00151.2007

Marketos, P., Zurek, S. and Moses, Anthony John 2007. Calculation of the mean path length of the Epstein frame under non-sinusoidal excitations using the two Epstein method. Presented at: Soft Magnetic Materials conference (SMM18), Cardiff, UK, p. 35.

Marketos, P., Zurek, S. and Moses, Anthony John 2007. A method for defining the mean path length of the Epstein frame. IEEE Transactions on Magnetics 43 (6) , pp. 2755-2757. 10.1109/TMAG.2007.894124

Marsh, R., Hewlett, S., Griffiths, Anthony John and Williams, Keith Philip 2007. Advanced thermal treatment for solid waste - A waste manager's guide. Presented at: Proceedings of the 22nd International Conference on Solid Waste Technology and Management, Philadelphia, USA., pp. 548-557.

Marsh, R., Hewlett, S., Griffiths, Anthony John and Williams, Keith Philip 2007. Energy from waste in the United Kingdom - Current and future scenarios. Presented at: Proceedings of the 22nd International Conference on Solid Waste Technology and Management, Philadelphia, USA, pp. 517-526.

Marsh, R., Rahman, A., Griffiths, Anthony John and Williams, Keith Philip 2007. Characterisation of ash fusion properties from biomass-derived solid fuels. Presented at: COMBURA 2007, An International Flame Research Foundation Conference, Nieuwegein, The Netherlands,

Marsh, R., Williams, Keith Philip, Griffiths, Anthony and Wilcox, S. 2007. Physical and thermal properties of extruded refuse derived fuel. Fuel Processing Technology 88 (7) , pp. 701-706.

Mbanaso, U., Cooper, G., Rezgui, Yacine

, Boddy, S. and Wetherill, M. 2007. Secure dynamic web services composition in the context of construction e-purchasing. Presented at: Proceedings of the 24th W78 Conference, & 14th EG-ICE Workshop, & 5th ITC@EDU workshop, Maribor, Slovenia,

McGovern, Peter 2007. Characterisation of gallium nitride HFETs using non-linear measurement systems. PhD Thesis, Cardiff University.

McKenzie-Kerr, Alastair 2007. Strategy selection in mental arithmetic problem solving : a case for adaptive, not automatic selection. PhD Thesis, Cardiff University.

McWhirter, John

, Baxter, P. D., Cooper, T, Redif, S and Foster, J 2007. An EVD algorithm for para-Hermitian polynomial matrices. IEEE Transactions on Signal Processing 55 (5) , pp. 2158-2169. 10.1109/TSP.2007.893222

Melikhov, Yevgen

, Jiles, David, Lo, C. C. H. and Kinser, E. 2007. Characterisation of case depth in surface-hardened steel components by Presiach model formalism. Presented at: 12th Electromagnetic Non-destructive Evaluation Conference (ENDE), Cardiff, UK,

Melikhov, Yevgen

, Krivoruchko, V.N., Revenko, Y.F., Jiles, David and Varyukhin, V.N 2007. Preisach modelling of magneto-resisitive hysteresis loops of half-metals. Presented at: Soft Magnetic Materials (SMM18), Cardiff, Wales,UK,

Melikhov, Yevgen

, Krivoruchko, V.N., YF., Revenko, Varyukhin, V.N. and Jiles, David 2007. Preisach modeling of magentoresistive hysteresis of half-metallic ferromagnets. Presented at: 52nd Magnetism and Magentic Materials Conference (MMM), Tampa, Florida, USA,

Melikhov, Yevgen

, Ranvah, N., Song, S. H., Jiles, David, Snyder, John Evan, Moses, Anthony John and Williams, P. I. 2007. Temperature dependence of magentic anisotropy of Ga-substituted cobalt ferrite. Presented at: 52nd Magnetism and Magentic Materials Conference, Tampa, USA, (BH-13)

Mellin, R. and Setchi, Rossitza

2007. Mass customisation in the automotive industry. Presented at: 5th International Conference 21st Century Challenges in Higher Education and Research, Sozopol, Bulgaria, pp. 240-244.

Miles, John Christopher, Kwan, Alan Shu Khen

, Wang, A. and Zhang, Y. 2007. Searching for good topological solutions using evolutionary algorithms. B, Topping, ed. Civil Engineering Computations: Tools and Techniques, Stirling: Saxe-Coburg Publications, pp. 149-172.

Min, Gao

and Rowe, David Michael 2007. Conversion efficiency of thermoelectric combustion system. IEEE Transactions on Energy Conversion 22 (2) , pp. 528-534. 10.1109/TEC.2006.877375

Min, Gao

and Rowe, David Michael 2007. Ring-structured thermoelectric module. Semiconductor Science and Technology 22 (8) , pp. 880-883. 10.1088/0268-1242/22/8/009

Min, Gao

and Rowe, David 2007. Conditions for observing the thermo-electric-photo cooling effect. IET Science, Measurement & Technology 1 (6) , pp. 329-332. 10.1049/iet-smt:20050091

Mohd Din, Shamzani Affendy Bin. 2007. Collection and physical characterization of airborne particulates. PhD Thesis, Cardiff University.

Moses, Anthony John 2007. Advanced soft magnetic materials for power applications. Kronmuller, H. and Parkin, S., eds. Handbook of Magnetism and Advanced Magnetic Materials, Vol. 4 (1). Hoboken, N. J.: Wiley, pp. 1926-1942. (10.1002/9780470022184.hmm430)

Moses, Anthony John and Jiles, David 2007. Origin, measurement and application of Barkhausen effect in magnetic steels. Takahashi, S. and Kikuchi, H., eds. Electromagnetic Non-Destructive Evaluation (X), Studies in Applied Electromagnetics and Mechanics, vol. 28. IOS Press, pp. 4-8.

Moses, Anthony John, Marketos, P. and Zurek, S. 2007. Effect of DC voltage on AC magnetisation of transformer core steel. Presented at: Proceedings of 13th International Symposium on Applied Electromagnetics and Mechanics (ISEM 2007), Lansing, USA, p. 221.

Moses, Anthony John, Patel, H. V. and Williams, P. I. 2007. Challenges in quantifying Barkhausen noise in electrical steels. Takahashi, S. and Kikuchi, H., eds. Electromagnetic Non-Destructive Evaluation (X), Studies in Applied Electromagnetics and Mechanics, vol. 28. IOS Press, pp. 178-185.

Moses, Anthony John, Di, X., Anderson, Philip Ian

, Beckley, P. and Stanbury, Hugh John 2007. Low frequency magnetic shielding: Present and future measurement. Przegald Elektrotechniczny 83 (4) , pp. 83-87.

N

Narracott, Andrew J., John, Gareth W., Hose, D. Rodney, Morris, Rhys J.

, Woodcock, John P. and Lawford, Patricia V. 2007. Influence of intermittent compression cuff design on calf deformation: computational results. Presented at: 29th Annual International Conference of the IEEE Engineering in Medicine and Biology Society, Lyon, France, 23-26 August 2007. IEEE, pp. 6334-6338. 10.1109/IEMBS.2007.4353804

Nestler, J., Morschhauser, A., Hiller, K., Bigot, Samuel

, Auerswald, J., Gavillet, J., Otto, T. and Gessner, T. 2007. Electrochemical microfluidic pumps based on super absorbing polymers. Presented at: 11th International Conference on Proceedings - Miniaturized Systems for Chemistry and Life Sciences Paris (uTAS2007), Paris, France, pp. 1504-1506.

Nestler, J., Morschhauser, A., Hiller, K., Otto, T., Bigot, Samuel

and Gessner, T. 2007. Polymer Lab-on-Chip systems with integrated electrochemical pumps. Presented at: Proceedings of International Conference on Multi-Material Micro Manufacture (4M2007), Borovets, Bulgaria, pp. 319-322.

Nicholas, M. K. D., Waters, M. G. J., Holford, Karen Margaret

and Adusei, G. 2007. Analysis of rhelogical properties of bone cement. Journal of Materials Science: Materials in Medicine 18 (7) , pp. 1407-1412. 10.1007/s10856-007-0125-2

Nicholas, Myfanwy K. 2007. Development of experimental rubber toughened bone cements. PhD Thesis, Cardiff University.

O

Ortega, P., RT., Waters, Haddad, Abderrahmane

, Hameed, R. and Davies, A.J. 2007. Impulse breakdown voltages of air gaps: A new approach to atmospheric correction factors. Presented at: 28th International Conference on Phenomena in Ionized Gases (ICPIG2007), Prague, Czech Republic, (3P10-1)

Ortega, P., Waters, R. T., Haddad, Abderrahmane

, Hameed, R. and Davies, A. J. 2007. Impulse breakdown voltages of air gaps: A new approach to atmospheric correction factors applicable to international standards. IEEE Transactions on Dielectrics and Electrical Insulation (TDEI) 14 (6) , pp. 1498-1508. 10.1109/TDEI.2007.4401234

Ouki, S. K., van Herwijnen, R., Harbottle, Michael John

, Hutchings, T. R., Al-Tabbaa, A., Johns, M. L. and Moffat, A. J. 2007. Novel special-purpose composts for sustainable remediation. Dixon, T., Raco, M., Catney, P. and Lerner, D. N., eds. Sustainable Brownfield Regeneration: Liveable Places from Problem Spaces, Oxford: Wiley- Blackwell, 177 -202.

Owen, N., Griffiths, Anthony John and Williams, Keith Philip 2007. Dirty materials recycling facilities(MRFs) and their role in assisting a UK local authority to divert waste away from landfill. Presented at: 22nd Solid Waste Technology and Management Conference 2007, Philadelphia, USA, pp. 417-424.

Owen, N., Griffiths, Anthony John and Williams, Keith Philip 2007. Waste compositional analysis - An integral requirement for changes to waste management practices and monitoring those changes. Presented at: 22nd Solid Waste Technology and Management Conference 2007, Philadelphia, USA, Philadelphia, USA, pp. 13-24.

P

Packianather, Michael Sylvester

, Dimov, Stefan Simeonov, Griffiths, Christian Andrew and Sha, Baichuan 2007. Investigation of micro-injection moulding: factors affecting the replication quality. Journal of Materials Processing Technology 183 (2-3) , 284 - 296. 10.1016/j.jmatprotec.2006.10.019

Pan, Shunqi

, Ali, K. and Fajrin, J. 2007. Bridge scour caused by a flood wave. Presented at: 32nd Congress of IAHR, the International Association of Hydraulic Engineering & Research: Harmonizing the Demands of Art and Nature in Hydraulics, Venice, Italy, 1-6 July 2007. Published in: Di Silvio, G. and Lanzoni, S. eds. 2007 IAHR Congress Proceedings, Venice, Italy, July 1-6, 2007. IAHR,

Pan, Shunqi

, MacDonald, N., Williams, J., O'Connor, B. A., Nicholson, J. and Davies, A. M. 2007. Modelling the hydrodynamics of offshore sandbanks. Continental Shelf Research 27 (9) , pp. 1264-1286. 10.1016/j.csr.2007.01.007

Panda, A. K., Mohanta, O., Mitra, A., Jiles, David, Lo, C. C. and Melikhov, Yevgen

2007. Soft magnetic properties of a high temperature CoFeSiBNb nanocrystalline alloy. Journal of Magnetism and Magnetic Materials 316 (2) , e886-e889. 10.1016/j.jmmm.2007.03.129

Park, Sangkeun, Choi, Heungjae

and Jeong, Yongchae 2007. Microwave group delay time adjuster using parallel resonator. IEEE Microwave and Wireless Components Letters 17 (2) , pp. 109-111. 10.1109/LMWC.2006.890331

Patel, H. V., Moses, Anthony John and Williams, P. I. 2007. The dependence of AC Barkhausen noise on data acquisition parameters. Przegald Elektrotechniczny 83 (4) , pp. 99-100.

Pellegrino, Cristina 2007. Decision support system for Brownfield Site Sustainable Regeneration. PhD Thesis, Cardiff University.

Perks, Richard Marc

, Kettle, J, Morgan, David Vernon and Porch, Adrian

2007. Monte Carlo simulation of indium tin oxide current spreading layers in light emitting diodes. Thin Solid Films 515 (24) , pp. 8660-8663. 10.1016/j.tsf.2007.04.006

Pettit, C., Azapagic, A., Tiwary, A., Sinnett, D., Hutchings, T., Peachey, C., DeMunck, C., Chung, W., Sharifi, V., Swithenbank, J., Chalabi, Z., Fletcher, T., Vardoulakis, S., Grundy, C., Leonardi, G., Thomas, H. R., Cleall, Peter John

, Jones, M. and Jefferis, S. 2007. More sustainable management of pollution: iIntegrated approach, models and tools. Presented at: International Conference on Whole Life Urban Sustainability and its Assessment, Glasgow, UK, Published in: M. Horner A. Price,, C. Hardcastle ed.

Pfutzner, H., Kaniusas, E., Kosel, J., Mehnen, L., Meydan, Turgut

, Borza, F., Vazquez, M., Rohn, M., Merlo, A. M. and Marquardt, B. 2007. First magnetic materials with sensitivity for the physical quantity curvature. Journal of Materials Processing Technology 181 (1-3) , pp. 186-189. 10.1016/j.jmatprotec.2006.03.026

Pham, Duc Truong and Soroka, Anthony John

2007. Automation of fault information management for customised products. Presented at: ICMA 2007: International Conference on Manufacturing Automation, Singapore, 28-30 May 2007. Proceedings of ICMA 2007: International Conference on Manufacturing Automation, Singapore, 28-30 May 2007. ICMA, pp. 295-309.

Pham, Duc Truong and Soroka, Anthony John

2007. An immune-network inspired rule generation algorithm (RULES-IS). Presented at: I*PROMS 2007 Innovative Production Machines and Systems, online, 1-14 July 2007.

Pham, Duc Truong and Soroka, Anthony John

2007. Managing fault information for customised products. Presented at: I*PROMS 2007 Innovative Production Machines and Systems, online, 1-14 July 2007.

Pham, Duc Truong, Soroka, Anthony John

, Koc, E., Ghanbarzadeh, A. and Otri, S. 2007. Some applications of the bees algorithm in engineering design and manufacture. Presented at: ICMA 2007: International Conference on Manufacturing Automation, Singapore, 28-30 May 2007. Proceedings of ICMA 2007: International Conference on Manufacturing Automation, Singapore, 28-30 May 2007. ICMA, pp. 782-794.

Pham, Duc Truong, Soroka, Anthony John

, Ghanbarzadeh, A., Koc, E. and Otri, S. 2007. Using the bees algorithm to train neural networks for wood defect identification. Presented at: 40th CIRP International Seminar on Manufacturing Systems, Liverpool, UK, 30 May – 1 June 2007.

Pham, D. T., Ji, Ze, Yang, Ming, Wang, Zuobin and Al-Kutubi, Mostafa 2007. A novel human-computer interface based on passive acoustic localisation. Human-Computer Interaction. Interaction Platforms and Techniques 4551 , pp. 901-909. 10.1007/978-3-540-73107-8_99

Pham, Duc Truong, Awadalla, Medhat Hussein and Eldukhri, Eldaw Elzaki 2007. Adaptive and cooperative mobile robots. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering 221 (3) , pp. 279-293. 10.1243/09596518JSCE299

Pham, Duc Truong, Darwish, Ahmed Haj, Eldukhri, Eldaw Elzaki and Otri, Sameh 2007. Using the Bees Algorithm to tune a fuzzy logic controller for a robot gymnast. Presented at: I*PROMS 2007 Innovative Production Machines and Systems, online, 1-14 July 2007.

Pham, Duc Truong, Gourashi, Nasir Salah and Eldukhri, Eldaw Elzaki 2007. Automated configuration of gripper systems for assembly tasks. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 221 (11) , pp. 1643-1649. 10.1243/09544054JEM878SC

Pham, D.T., Al-Kutubi, M, Yang, M, Wang, Z and Ji, Z

2007. Pattern matching for tangible acoustic interfaces. Intelligent Production Machines and Systems, p. 556. (10.1016/B978-008045157-2/50097-3)

Pham, D.T., Ji, Ze

, Peyroutet, O., Yang, M., Wang, Z. and Al-kutubi, M. 2007. Localisation of impacts on solid objects using the wavelet transform and maximum likelihood estimation. Presented at: 2nd I*PROMS Virtual International Conference, Internet, 3-14 July 2006. Published in: Pham, D.T. ed. Intelligent Production Machines and Systems - 2nd I*PROMS Virtual International Conference. Elsevier, pp. 541-547. 10.1016/B978-008045157-2/50095-X

Pham, Duc Truong, Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul

, Bigot, Samuel

, Dobrev, T., Ferri, C., Gandarias, Endika, Hoyle, R. T., Griffiths, C. A., Kettle, J., Lalev, G. M., Li, W., Matthews, C. W., Minev, Roussi, Petkov, Petko Vladev

, Packianather, Michael Sylvester

, Petrelli, A., Popov, Krastimir Borisov, Rees, A., Sha, B., Thomas, A. and Zhao, H. 2007. Recent advances in micro and nano manufacturing. Presented at: Proceedings of 4th International Conference on Digital Enterprise Technology (DET2007), Bath, UK, pp. 24-33.

Pham, Duc Truong, Fahmy, Ashraf and Eldukhri, Eldaw Elzaki 2007. Inductive fuzzy neural network for multi-input multi-output dynamic systems modelling. Presented at: I*PROMS 2007 Innovative Production Machines and Systems, online, 1-14 July 2007.

Pham, Duc Truong, Ivanov, Atanas, Bigot, Samuel

, Popov, Krastimir Borisov and Dimov, Stefan Simeonov 2007. An investigation of tube and rod electrode wear in micro EDM drilling. International Journal of Advanced Manufacturing Technology 33 (1-2) , pp. 103-109. 10.1007/s00170-006-0639-7

Pham, Duc Truong, Ivanov, Atanas, Bigot, Samuel

, Popov, Krastimir Borisov and Dimov, Stefan Simeonov 2007. A study of micro-electro discharge machining electrode wear. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 221 (5) , pp. 605-612. 10.1243/0954406JMES413

Phway, T. P. P. and Moses, Anthony John 2007. Magnetisation-induced mechanical resonance in electrical steel. Journal of Magnetism and Magnetic Materials 316 (2) , pp. 468-471. 10.1016/j.jmmm.2007.03.130

Phway, T. P. P. and Moses, Anthony John 2007. Magnetostriction trends in non-oriented 6.5 % Si-Fe. Presented at: Soft Magnetic Materials conference (SMM18), Cardiff, UK, (C-004) p. 235.

Phway, Thant Phyu Phyu 2007. Magnetostrictively induced mechanical resonance of electrical steel strips. PhD Thesis, Cardiff University.

Popov, Krastimir Borisov, Dimov, Stefan Simeonov, Ivanov, Atanas, Pham, Duc Truong and Gandarias, Endika 2007. New Technology for setting up The Working Coordinate system in micromilling. Presented at: 4M 2007: 3rd International Conference on Multi-Material Micro Manufacture, Borovets, Bulgaria, 3-5 October 2007. Published in: Dimov, Stefan Simeonov, Menz, Wolfgang and Toshev, Yuli eds. Proceedings of the 3rd International Conference on Multi-Material Micro Manufacture. Caithness, Scotland: Whittles Publishing, pp. 127-130.

Popov, Krastimir Borisov, Dimov, Stefan Simeonov, Pham, Duc Truong and Ivanov, Atanas 2007. Micro-milling: solutions for improving process reliability. Presented at: 5th International Conference on Manufacturing Research (ICMR07), Leicester, UK, pp. 70-76.

Porch, Adrian

and Morgan, David Vernon 2007. Modeling of barrier tunneling in hetorojunction devices. Presented at: Proceedings 31st Workshop on Compound Semiconductor Devices and Ics ( WOCSDICE 2007), Venice, Italy, pp. 145-148.

Prickett, Paul William

and Grosvenor, Roger Ivor

2007. A microcontroller-based milling process monitoring and management system. Proceedings of the Institution of Mechanical Engineers Part B Journal of Engineering Manufacture 221 (2) , pp. 357-362. 10.1243/09544054JEM556SC

Pullin, Rhys

, Baxter, M., Eaton, Mark Jonathan

2007. Novel acoustic emission source detection. Journal of Acoustic Emission 25 , pp. 215-223.

Pullin, Rhys

, Baxter, M., Eaton, Mark Jonathan

2007. Novel acoustic emission source detection. Presented at: 5th International Conference on Acoustic Emission, Lake Tahoe, USA,

Pullin, Rhys

, Hensman, J. J., Holford, Karen Margaret

, Worden, K. and Evans, Samuel Lewin

2007. Principal component analysis of acoustic emission signals from a landing gear component. Key Engineering Materials 347 , pp. 139-144.

Pullin, Rhys

2007. Confidence of detection of fracture signals using acoustic emission. Presented at: 5th International Conference on Advances in Experimental Mechanics, Manchester, Manchester, UK,

Pullin, Rhys

2007. Confidence of detection of fractures using acoustic emission signals. Applied Mechanics and Materials 07-08 , pp. 147-152. 10.4028/www.scientific.net/AMM.7-8.147

Pullin, Rhys

, Evans, Samuel Lewin

, Baxter, M. and Hensman, J. J 2007. Advanced location and characterisation of damage in complex metallic structures using acoustic emission. Presented at: 13th International Conference on Experimental Mechanics (ICEM07), Alexandroupolis, Greece,

Pullin, Rhys

, Theobald, P., Holford, Karen Margaret

2007. A Numerical Determination of Acoustic Emission Sensor Response in Plates Using Dispersion Curves. Key Engineering Materials 347 , pp. 381-386. 10.4028/www.scientific.net/KEM.347.381

Pullin, Rhys

, Theobald, Peter

2007. Numerical determination of acoustic emission sensor response in plates using dispersion curves. Presented at: 7th International Conference on Damage Assessment of Structures (DAMAS 2007), Turin, Italy,

Q

Qiao, H., Evans, Henry Peredur

and Snidle, Raymond Walter

2007. Comparison of fatigue model results for rough surface elastohydrodynamic lubrication. Presented at: 34th Leeds-Lyon Symposium on Tribology, Lyon, France,

Qin, Yong 2007. Dynamic modelling of combustion processes. PhD Thesis, Cardiff University.

R

Rabczuk, T., Bordas, Stephane Pierre Alain

and Zi, G. 2007. A three-dimensional meshfree method for continuous multiple-crack initiation, propagation and junction in statics and dynamics. Computational Mechanics 40 (3) , pp. 473-495. 10.1007/s00466-006-0122-1

Rafezy, B. and Howson, William Paul 2007. An overview of locating shear centres of irregular buildings. Presented at: 3rd National Congress on Civil Engineering, Tabriz, Iran, (2250A)

Rafezy, B., Zare, A. and Howson, William Paul 2007. Coupled lateral-torsional vibration of proportional asymmetric, three dimensional frame structures. International Journal of Solids and Structures 44 (1) , pp. 128-144. 10.1016/j.ijsolstr.2006.04.019

Ragusa, C., Zurek, S., Appino, C. and Moses, Anthony John 2007. An intercomparison of rotational loss measurement in non-oriented Fe-Si alloys. Presented at: Soft Magnetic Materials conference (SMM18), Cardiff, UK, (C-010)

Ramtharan, G., Ekanayake, Janaka Bandara

and Jenkins, Nicholas

2007. Frequency support from doubly fed induction generator wind turbines. IET Renewable Power Generation 1 (1) , pp. 3-9. 10.1049/iet-rpg:20060019

Ramtharan, G., Jenkins, Nicholas

and Anaya-Lara, O. 2007. Modelling and control of synchronous generators for wide-range variable-speed wind turbines. Wind Energy 10 (3) , pp. 231-246. 10.1002/we.219

Ranvah, N., Melikhov, Yevgen

, Snyder, John Evan, Jiles, David, Moses, Anthony John and Williams, Paul Ieuan

2007. Temperature dependence of magnetic properties of gallium-substituted cobalt ferrite. Presented at: Soft Magnetic Materials (SMM182007), Cardiff, UK, (G-003)

Rashedin, Razib 2007. A novel miniature matrix array transducer system for loudspeakers. PhD Thesis, Cardiff University.

Rauen, William Bonino, Lin, BinLiang

2007. Contaminated sediment transport experiments in an idealised estuary model. Presented at: Proceedings of 5th International Symposium on Environmental Hydraulics, Tempe, USA,

Rauen, William Bonino, Lin, BinLiang

, Falconer, Roger Alexander

and Teixeira, Edmilson C. 2007. CFD and experimental model studies for water disinfection tanks with low Reynolds number flows. Chemical Engineering Journal 137 (3) , pp. 550-560. 10.1016/j.cej.2007.05.011

Rees-Gralton, Thomas Michael 2007. Development of a prediction tool for utility boiler performance. PhD Thesis, Cardiff University.

Rees, Stephen William

, Zhou, Z and Thomas, Hywel Rhys

2007. Ground heat transfer: a numerical simulation of a full-scale experiment. Building and Environment 42 (3) , pp. 1478-1488. 10.1016/j.buildenv.2005.12.022

Rezgui, Yacine

2007. Exploring virtual team-working effectiveness in the construction sector. Interacting with Computers 19 (1) , pp. 96-112. 10.1016/j.intcom.2006.07.002

Rezgui, Yacine

2007. Knowledge systems and value creation: An action research investigation. Industrial Management and Data Systems 107 (2) , pp. 166-182. 10.1108/02635570710723796

Rezgui, Yacine

2007. Role-based service-oriented implementation of a virtual enterprise: A case study in the construction sector. Computers in Industry 58 (1) , pp. 74-86. 10.1016/j.compind.2006.04.009

Rezgui, Yacine

2007. Text based domain ontology building using Tf-idf and metric clusters techniques. Knowledge Engineering Review 22 (4) , pp. 379-403. 10.1017/S0269888907001130

Rezgui, Yacine

and Medjdoub, B. 2007. A service infrastructure to support ubiquitous engineering practices. Presented at: IFIP TC 5 Working Group 5.5 Eighth IFIP Working Conference on Virtual Enterprises, Guimarães, Portugal, 10-12 September 2007. Published in: Camarninha-Matos, L. C., Afsarmanesh, H., Novais, P. and Amalide, C. eds. Establishing the foundation of collaborative networks. New York, NY: Springer, pp. 627-636.

Rezgui, Yacine

and Medjdoub, B. 2007. A service infrastructure to support ubiquitous engineering practices. Presented at: Proceedings of the 8th IFIP Working Conference on Virtual Enterprises, Guimaraes, Portugal,

Rezgui, Yacine

and Nefti-Meziani, S. 2007. Ontology-based dynamic composition of services using semantic relatedness and categorisation techniques, ICEIS. Presented at: 9th International Conference on Enterprise Information Systems (ICEIS 2007), Funchal, Portugal,

Ring, A. P., Lograsso, T., Schlagel, D., Snyder, John Evan and Jiles, David 2007. Irreversible field induced magnetostriction at temperatures above and below the order-disorder transition in single crystal Tb2Si2.2Ge1.8. Presented at: 10th Joint MMM-INTERMAG Conference, Baltimore, USA,

Rivet, B., Aubrey, Andrew, Girin, L., Hicks, Yulia Alexandrovna

, Jutten, C. and Chambers, J. 2007. Development and comparison of two approaches for visual speech analysis with application to voice activity detection. Presented at: International Conference on Auditory Visual Speech Processing (AVSP), Hilvarenbeek, The Netherlands,

Rodriquez-Repiso, L., Setchi, Rossitza

and Salmeron, J. L. 2007. Modelling IT projects success. Technovation 27 (10) , pp. 582-594. 10.1016/j.technovation.2006.12.006

Rodriquez-Repiso, L., Setchi, Rossitza

and Salmeron, J. L. 2007. Modelling IT projects success with fuzzy cognitive maps. Expert Systems with Applications 32 (2) , pp. 543-559. 10.1016/j.eswa.2006.01.032

Roff, C., Sheikh, A., Benedikt, Johannes

, Tasker, Paul J.

, Hilton, K. P., Maclean, J. O., Hayes, D. G., Uren, Michael John and Martin, T. 2007. Optimising GaN/AIGaN HFET designs for high efficiency. Presented at: 2nd European Microwave Integrated Circuits Conference (EuMIC 2007), Munich, Germany, pp. 165-168. 10.1109/EMICC.2007.4412674

Roff, Chris, McGovern, Peter, Benedikt, Johannes

, Tasker, Paul

, Balmer, R.S., Wallis, D.J., Hilton, K.P., Maclean, J.O., Hayes, D.G., Uren, M.J. and Martin, T. 2007. Detailed analysis of DC-RF dispersion in AlGaN/GaN HFETs using waveform measurements. Presented at: 1st European Microwave Integrated Circuits Conference, Manchester, UK, 10-13 Sept 2006. 2006 European Microwave Integrated Circuits Conference. IEEE, p. 43. 10.1109/EMICC.2006.282745

Roff, Christopher, Benedikt, Johannes

and Tasker, Paul J.

2007. Design Approach for Realization of Very High Efficiency Power Amplifiers. Presented at: IEEE MTT-S International Microwave Symposium Digest 2007, 10.1109/MWSYM.2007.380310

S

Sagarduy, J. and Moses, Anthony John 2007. Impact of sideband harmonic pattern on losses in laminated non-oriented steel. Presented at: Soft Magnetic Materials conference (SMM18), Cardiff, UK, (C-006) p. 237.

Sagarduy, J., Moses, Anthony John and Anayi, Fatih Jamel

2007. Effect of AC-AC conversion topology on separation of losses in Si-Fe steel. Presented at: 10th Joint MMM/Intermag conference, Baltimore, USA, (DP-07)

Sahran, Shahnorbanun 2007. Application of spiking neural networks and the bees algorithm to control chart pattern recognition. PhD Thesis, Cardiff University.

Sanei, Saeid and Chambers, J. 2007. EEG signal processing. Chichester: Wiley-Blackwell.

Sapsford, Devin James

, Barnes, A., Dey, M. and Williams, Keith Philip 2007. Low footprint mine water treatment: Field demonstration and application. Presented at: Proceedings of the International Mine Water Association Symposium 2007, Cagliari, Italy,

Sapsford, Devin James

, Barnes, A., Dey, M., Williams, Keith Philip and Younger, P. 2007. Low footprint mine water treatment: field demonstration and application. Mine Water and the Environment, Journal of International Mine Water Association 26 (4) , pp. 243-250. 10.1007/s10230-007-0012-6

Sarua, Andrei, Ji, Hangfeng, Hilton, K. P., Wallis, David

, Uren, Michael J., Martin, T and Kuball, Martin 2007. Thermal boundary resistance between GaN and substrate in AlGaN/GaN electronic devices. IEEE Transactions of Electron Devices 54 (12) , pp. 3152-3158. 10.1109/TED.2007.908874

Schnauder, I., Bockelmann-Evans, Bettina Nicole

and Lin, BinLiang

2007. Modelling faecal bacteria pathways in receiving waters. Proceedings of the ICE - Maritime Engineering 160 (4) , pp. 143-153. 10.1680/maen.2007.160.4.143

Seetharam, S. C., Thomas, H. R. and Cleall, Peter John

2007. Coupled thermo/hydro/chemical/mechanical model for unsaturated soils- numerical algorithm. International Journal for Numerical Methods in Engineering 70 (12) , pp. 1480-1511. 10.1002/nme.1934

Seo, T. S., Pham, Duc Truong and Popov, Krastimir Borisov 2007. A semantic data model for electrical discharge machining. Presented at: Proceedings of the 3rd Virtual International Conference on Intelligent Production Machines and Systems (IPROMS2007), Whittles, UK, Published in: Pham, Duc Truong, Eldukhri, Eldaw Elzaki and Soroka, A. J. eds. Elsevier (Oxford), pp. 371-376.

Seo, Sujin, Ryu, Namsik, Choi, Heungjae

and Jeong, Yongchae 2007. Novel high-Q inductor using active inductor structure and feedback parallel resonance circuit. Presented at: 2007 IEEE Radio Frequency Integrated Circuits (RFIC) Symposium, Honolulu, Hawaii, 467-470. 2007 IEEE Radio Frequency Integrated Circuits (RFIC) Symposium. Picastaway: IEEE, pp. 467-470. 10.1109/RFIC.2007.380925

Setchi, Rossitza M.

2007. Personalisation in professional e-learning and performance support. Presented at: 5th International Conference 21st Century Challenges in Higher Education and Research, Sozopol, Bulgaria,

Setchi, Rossitza M.

and Lagos, N. 2007. Knowledge in product and performance support. Presented at: 2nd International Conference on Knowledge Science, Engineering and Management (KSEM '2007), Melbourne, Australia, pp. 460-471.

Setchi, Rossitza M.

and Lagos, N. 2007. Multimodal reasoning in a knowledge framework for product support. Presented at: 19th International Conference on Computer, Information and Systems Science and Engineering, Bangkok, Thailand, pp. 147-153.

Setchi, Rossitza M.

, Lagos, N. and Froud, D. 2007. Computational imagination: research agenda. Presented at: 20th Australian Joint Conference on Artificial Intelligence (AI '07), Gold Coast, Australia, pp. 387-393.

Setchi, Rossitza M.

, Lagos, N. and Huneiti, A. 2007. Semantic modelling of product manuals. Presented at: 11th International Conference on Knowledge-Based and Intelligent Information and Engineering Systems (KES 2007), Vietri sur Mare, Italy, pp. 1162-1169.

Setchi, Rossitza M.

and Tang, Q. 2007. Concept indexing using ontology and supervised machine learning. Presented at: 19th International Conference on Computer, Information and Systems Science and Engineering, Bangkok, Thailand, pp. 221-226.

Setchi, Rossitza M.

and Tang, Q. 2007. Semantic-based representation of content using concept indexing. Presented at: Innovative Production Machines and Systems (*I'PROMS*07), Cardiff, UK, pp. 611-618.

Setchi, Rossitza

and Lagos, N. 2007. Knowledge in product and performance support. Zhang, Z. and Siekmann, J., eds. Knowledge Science, Engineering and Management, Lecture Notes in Computer Science, vol. 4798. Berlin: Springer, pp. 460-471. (10.1007/978-3-540-76719-0_45)

Setchi, Rossitza

and Lagos, N. 2007. Multimodal reasoning in a knowledge framework for product support. World Academy of Science, Engineering and Technology 19 , pp. 147-153.

Setchi, Rossitza

, Lagos, N. and Froud, D. 2007. Computational imagination: research agenda. Orgun, M. A. and Thornton, J., eds. Advances in Artificial Intelligence, Lecture Notes in Computer Science, vol. 4830. Berlin: Springer, pp. 387-393. (10.1007/978-3-540-76928-6_40)

Setchi, Rossitza

, Lagos, N. and Huneiti, A. 2007. Semantic modelling of product manuals. Apolloni, B., ed. Knowledge-Based and Intelligent Information and Engineering Systems, Lecture Notes in Computer Science, vol. 4693. Berlin: Springer, pp. 1162-1169. (10.1007/978-3-540-74827-4_145)

Setchi, Rossitza

and Tang, Q. 2007. Concept indexing using ontology and supervised machine learning. World Academy of Science, Engineering and Technology 25 , pp. 221-226.

Sha, Baichuan, Dimov, Stefan Simeonov, Griffiths, Christian Andrew and Packianather, Michael Sylvester

2007. Micro-injection moulding: factors affecting the achievable aspect ratios. International Journal of Advanced Manufacturing Technology 33 (1-2) , 147 - 156. 10.1007/s00170-006-0579-2

Shaw, D., Miles, John Christopher and A., Gray W. 2007. Conceptual design of geodesic-like domes using computational geometry. Architectural Engineering and Design Management 3 (4) , pp. 238-248.

Sheikh, A., Tasker, Paul J.

, Lees, Jonathan

and Benedikt, Johannes

2007. The impact of system impedance on the characterisation of high power devices. Presented at: 37th European Microwave Conference (EuMC), Munich, Germany, pp. 949-952. 10.1109/EUMC.2007.4405315

Siddiqui, R. A., Amer, W., Ahsan, Q., Grosvenor, Roger Ivor

and Prickett, Paul William

2007. Multi-band infinite impulse response filtering using microcontrollers for e-monitoring applications. Journal of Microprocessors and Microsystems 31 (6) , pp. 370-380. 10.1016/j.micpro.2007.02.007

Singh, Rao Martand 2007. Experimental and numerical investigation of heat and mass movement in unsaturated clays. PhD Thesis, Cardiff University.

Snidle, Raymond Walter

, Dhulipalla, A. K., Evans, Henry Peredur

and Cooper, C. V. 2007. Scuffing performance of a hard coating under EHL conditions at sliding speeds up to 16 m/s and contact pressures up to 2.0 Gpa. Presented at: 2007 ASME International Design Engineering Technical Conferences and Computer and Information in Engineering Conference, Las Vegas, USA,

Song, G., Lin, J., Zhao, Y., Howson, William Paul and Williams, Frederic Ward 2007. Robust H ∞ control for aseismic structures with uncertainties in model parameters. Earthquake Engineering and Engineering Vibration 6 (4) , pp. 409-416. 10.1007/s11803-007-0782-7

Song, S. H., Lo, C. C. H., Lee, S. J., Aldini, S. T., Snyder, John Evan and Jiles, David 2007. Magnetic and magnetoelastic properties of Ga-substituted cobalt ferrite. Presented at: 10th Joint MMM-INTERMAG Conference on Magnetism and Magnetic Materials, Baltimore, USA,

Song, S. H., Ranvah, N., Melikhov, Yevgen

, Snyder, John Evan and Jiles, David 2007. Variation of Magnetoelastic Properties of CoGaxFe2-xO4 with Temperature. Presented at: 52nd Magnetism and Magentic Materials Conference (MMM07), Tampa, USA,

Spezi, Emiliano

2007. Status of MCTP in Europe. Radiotherapy and Oncology 84 , S6-S7.

Spezi, Emiliano

, Angelini, Anna Lisa and Ferri, Andrea 2007. Monte Carlo simulation of the SIEMENS IGRT carbon fibre tabletop. Journal of Physics: Conference Series 74 , U145-U150. 10.1088/1742-6596/74/1/021017

Spezi, Emiliano

and Ferri, Andrea 2007. Dosimetric characteristics of the siemens IGRT carbon fiber tabletop. Medical Dosimetry 32 (4) , pp. 295-298.

Spezi, Emiliano

, Palleri, F., Angelini, A. L., Ferri, A. and Baruffaldi, F. 2007. Characterization of materials for prosthetic implants using the BEAMnrc Monte Carlo code. Journal of Physics: Conference Series 74 , U141-U144. 10.1088/1742-6596/74/1/021016

Stannard, N., Bumby, J. R., Taylor, P. and Cipcigan, Liana Mirela

2007. AC and DC aggregation effects of small-scale wind generators. IET Renewable Power Generation 1 (2) , pp. 123-130.

Stapleton, C. M., Wyer, M. D., Kay, D., Bradford, M., Humphrey, N., Wilkinson, J., Lin, BinLiang

, Yang, L., Falconer, Roger Alexander

, Watkins, J., Francis, C. A., Crowther, J., Paul, N. D., Jones, K. and McDonald, A. T. 2007. Fate and transport of particles in estuaries: Volume I: summary and conclusions. [Technical Report]. Bristol, UK: Environment Agency. Available at: http://a0768b4a8a31e106d8b0-50dc802554eb38a24458b9...

Stapleton, C. M., Wyer, M. D., Kay, D., Bradford, M., Humphrey, N., Wilkinson, J., Lin, BinLiang

, Yang, L., Falconer, Roger Alexander

, Watkins, J., Francis, C. A., Crowther, J., Paul, N. D., Jones, K. and McDonald, A. T. 2007. Fate and transport of particles in estuaries: Volume II: Estimation of enterococci inputs to the Severn estuary from point and diffuse sources. [Technical Report]. Bristol, UK: Environment Agency. Available at: http://a0768b4a8a31e106d8b0-50dc802554eb38a24458b9...

Stapleton, C. M., Wyer, M. D., Kay, D., Bradford, M., Humphrey, N., Wilkinson, J., Lin, BinLiang

, Yang, L., Falconer, Roger Alexander

, Watkins, J., Francis, C. A., Crowther, J., Paul, N. D., Jones, K. and McDonald, A. T. 2007. Fate and transport of particles in estuaries: Volume III: Laboratory experiments, enterococci decay rates and association with sediments. [Technical Report]. Bristol, UK: Environment Agency. Available at: http://a0768b4a8a31e106d8b0-50dc802554eb38a24458b9...

Stapleton, C. M., Wyer, M. D., Kay, D., Bradford, M., Humphrey, N., Wilkinson, J., Lin, BinLiang

, Yang, L., Falconer, Roger Alexander

, Watkins, J., Francis, C. A., Crowther, J., Paul, N. D., Jones, K. and McDonald, A. T. 2007. Fate and transport of particles in estuaries: Volume IV: Numerical modelling for bathing water enterococci estimation in the Severn estuary. [Technical Report]. Bristol, UK: Environment Agency. Available at: http://a0768b4a8a31e106d8b0-50dc802554eb38a24458b9...

Syed, Mofazzal Haider 2007. Data driven modelling for environmental water management. PhD Thesis, Cardiff University.

Syred, Nicholas, Kurniawan, K., Griffiths, Anthony John, Gralton, T. and Ray, R. 2007. Development of fragmentation models for solid fuel combustion and gasification as subroutines for inclusion in CFD codes. Fuel 86 (14) , pp. 2221-2231. 10.1016/j.fuel.2007.05.060

Syred, Nicholas, Bowen, Philip John

and Roberts, P. 2007. Efficient generation of swirling flow. Presented at: International Flame Research Foundation/American‐Japanese Flame Research Committees (AFRC) International Symposium, Waikoloa Beach, Hawaii, 21-24 October 2007.

T

Tasker, L. H., Sparey-Taylor, G. J. and Nokes, Leonard Derek Martin

2007. Applications of nanotechnology in orthopaedics. Clinical orthopaedics and related research 456 , pp. 243-249. 10.1097/BLO.0b013e31803125f4

Tasker, Paul J.

and Benedikt, Johannes

2007. Waveform measurement and characterisation: The multi-tone characterisation challenge. Presented at: Proceedings of Workshop on RF power transistor and amplifier characterisation techniques, IEEE 2007 Radio and Wireless Symposium, Long Beach, USA,

Taylor, Mark Raymond, Miles, John Christopher, Bouchlaghem, Dino and Anumba, Chimay 2007. User interfaces for complex engineering software: application of virtual reality. Journal of Computing in Civil Engineering 21 (1) , pp. 59-62. 10.1061/(ASCE)0887-3801(2007)21:1(59)

Teo, F. Y., Falconer, Roger Alexander

and Lin, BinLiang

2007. Tsunami Currents in an idealised estuary with mangroves. Presented at: Proceeding of 2nd international conference on managing rivers in the 21st century, Kuching Sarawak, Malaysia, pp. 218-226.

Thayne, Iain, Elgaid, Khaled

, Moran, David, Cao, Xin, Boyd, Euan, McLelland, Helen, Holland, Martin, Thoms, Stephen and Stanley, Colin 2007. 50 nm metamorphic GaAs and InP HEMTs. Thin Solid Films 515 (10) , pp. 4373-4377. 10.1016/j.tsf.2006.07.104

Theobald, Peter

, Byrne, Carlton Barrie Baylis, Oldfield, S. F., Dowson, Duncan, Benjamin, Michael, Dent, Claire, Pugh, Neil D.

and Nokes, Leonard Derek Martin

2007. The Potential Frictional Significance of Kagers Fat Pad. Presented at: 53rd Annual Meeting of the Orthopaedic Research Society, San Diego, USA,

Theobald, Peter

, Byrne, Carlton Barrie Baylis, Oldfield, Sarah Frances, Dowson, Duncan, Benjamin, M., Dent, Colin Michael, Pugh, Neil D.

and Nokes, Leonard Derek Martin

2007. Lubrication regime of the contact between fat and bone in bovine tissue. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of engineering in medicine 221 (4) , pp. 351-356. 10.1243/09544119JEIM176

Thomas, Christian 2007. Numerical simulations of disturbance development in rotating boundary-layers. PhD Thesis, Cardiff University.

Tripathy, Snehasis

and Schanz, T 2007. Compressibilty behaviour of clays at large pressures. Canadian Geotechnical Journal 44 (3) , pp. 355-362. 10.1139/T06-123

U

Ugalde Loo, Carlos Ernesto

, Vanfretti, Luigi, Liceaga-Castro, Eduardo and Acha, Enrique 2007. Synchronous generators modeling and control using the framework of individual channel analysis and design: Part 1. International Journal of Emerging Electric Power Systems 8 (5) 10.2202/1553-779X.1638

Ullah, Niamat, Griffiths, Huw, Harid, Noureddine

, Haddad, Abderrahmane

Ullah, Niamat, Griffiths, Huw, Harid, Noureddine

, Haddad, Abderrahmane

and Ainsley, A. 2007. Current distribution on tower lines under fault and surge conditions. Presented at: 42nd International Universities Power Engineering Conference (IUEPC2007), Brighton, UK, 42nd International Universities Power Engineering Conference. 2007 42nd International Universities Power Engineering Conference, Vols 1-3. , vol.1-3 IEEE, pp. 812-817.

V

Vanderstraeten, Barbara, Chin, Pik Wai, Fix, Michael, Leal, Antonio, Mora, Grisel, Reynaert, Nick, Seco, Joao, Soukup, Martin, Spezi, Emiliano

, De Neve, Wilfried and Thierens, Hubert 2007. Conversion of CT numbers into tissue parameters for Monte Carlo dose calculations: a multi-centre study. Physics in Medicine and Biology 52 (3) , pp. 539-562. 10.1088/0031-9155/52/3/001

Vieyra, Malini, Meydan, Turgut

and Borza, Firuta 2007. X-Ray diffraction analysis and magnetic behaviour of amorphous Fe15Co17Ni58B10 nanowires obtained by electrochemical deposition. Journal of Applied Physics 101 (9) , 09N102. 10.1063/1.2711700

Vorakulpipat, C. and Rezgui, Yacine

2007. Value Creation: The Next Generation of Knowledge Management. Presented at: Proceedings of the Information Resources Management Association International Conference (IRMA 2007), Vancouver, Canada,

W

Wang, J., Karihaloo, Bhushan Lal

and Duan, H. L. 2007. Nano-mechanics or how to extend continuum mechanics to nanoscale. Bulletin of the Polish Academy of Sciences 55 (2) , pp. 133-140.

Wang, Xiaolin, Bockelmann-Evans, Bettina Nicole

and Liang, Dongfang 2007. Examination of FST-hemispheres for evaluating boundary shear stress in streams. Journal of River Basin Management 5 (2) , pp. 155-163.

Ward, M. B., Farrow, T., See, P., Yuan, Z. L., Karimov, O. Z., Bennett, Anthony

, Shields, A. J., Atkinson, P., Cooper, K. and Ritchie, D. A. 2007. Electrically driven telecommunication wavelength single-photon source. Applied Physics Letters 90 (6) , 063512. 10.1063/1.2472172

Watson, A., Featherston, Carol Ann

and Kennedy, David

2007. Optimization of postbuckled stiffened panels with multiple stiffener sizes. Presented at: 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Honolulu, USA, (AIAA-2) pp. 1-8.

Watton, John 2007. Modelling, monitoring and diagnostic techniques for fluid power systems. London: Springer.

Wells, Catherine Elizabeth 2007. Abdominal Aortic Aneurysm detection by common femoral artery Doppler ultrasound waveform analysis. PhD Thesis, Cardiff University.

Wells, Peter Neil Temple

2007. Lord Rayleigh: John William Strutt, Third Baron Rayleigh. IEEE Transactions on Ultrasonics, Ferroelectrics and Frequency Control 54 (3) , pp. 591-596. 10.1109/TUFFC.2007.281

Wetherill, M., Rezgui, Yacine

, Boddy, S. and Cooper, G. 2007. Intra and inter-organisational knowledge services to promote informed sustainability practices. Journal of Computing in Civil Engineering 21 (2) , pp. 78-89. 10.1061/(ASCE)0887-3801(2007)21:2(78)

Whatling, Gemma Marie

, Jones, L., Dabke, H., Alderman, P. H. and Roberts, P. 2007. Objective functional assessment of THA following two common surgical approaches. Presented at: Proceedings of the IMechE, Engineers & Surgeons: Joined at the Hip, London, UK,

Whatling, Gemma Marie

, Jones, L., Holt, Catherine Avril

, Dabke, H. V. and Roberts, P. 2007. Comparing postoperative function following two approaches to total hip arthroplasty using a novel objective analysis tool [Abstract]. Gait & Posture 26 (S1) , S70. 10.1016/S0966-6362(07)80010-5

Whatling, Gemma Marie

, Jones, L., Holt, Catherine Avril

, Dabke, H., Alderman, P. M. and Roberts, P. 2007. Comparing postoperative function following two approaches to total hip arthroplasty using a novel objective analysis tool. Presented at: 16th Annual Meeting of ESMAC, Athens, Greece, , vol.26 (P030)

Whatling, Gemma Marie

, Jones, L., Holt, Catherine Avril

2007. A study of stair climbing for patients with advanced knee osteoarthritis [Abstract]. Gait & Posture 26 (S1) , S117. 10.1016/S0966-6362(07)80010-5

Whatling, Gemma Marie

, Jones, L., Holt, Catherine Avril

2007. A study of stair climbing for patients with advanced knee osteoarthritis. Presented at: 16th Annual Meeting of ESMAC, Athens, Greece, , vol.26 Gait & Posture,

Wheeler, H. J., Nokes, Leonard Derek Martin

and Powell, T. 2007. A review of high frequency oscillation ventilation in the neonate. Journal of Medical Engineering and Technology 31 (5) , pp. 367-374.

Williams, Frederic Ward, Watson, A., Howson, William Paul and Jones, A. J. 2007. Exact solutions for Sturm-Liouville problems on trees via novel substitute systems and the Wittrick-Williams algorithm. Proceedings of the Royal Society A Mathematical, Physical and Engineering Sciences 463 (2088) , pp. 3195-3224. 10.1098/rspa.2007.1905

Williams, Tudor Vyvyan 2007. Large-signal multi-tone time domain waveform measurement system with broadband active load impedance control. PhD Thesis, Cardiff University.

Wilson, Catherine

2007. Flow resistance models for flexible submerged vegetation. Journal of Hydrology 342 (3-4) , pp. 213-222. 10.1016/j.jhydrol.2007.04.022

Wilson, Catherine

, Guymer, I., Boxall, J. B. and Olsen, N. R. B. 2007. Three-dimensional numerical simulation of solute transport in a meandering self-formed river channel. IAHR Journal of Hydraulic Research 45 (5) , pp. 610-616.

Witlox, Henk, Harper, Mike, Bowen, Philip John

and Cleary, Vincent 2007. Flashing liquid jets and two-phase droplet dispersion: II. Comparison and validation of droplet size and rainout formulations. Journal of Hazardous Materials 142 (3) , pp. 797-809. 10.1016/j.jhazmat.2006.06.126

Woolam, T. C., Griffiths, Anthony John and Williams, Keith Philip 2007. The difficulties surrounding local authorities kitchen waste collection. International Journal of Sustainable Development and Planning 2 (1) , pp. 88-98. 10.2495/SDP-V2-N1-88-98

Worn, M. and Jones, Michael David

2007. Rib fractures in infancy: establishing the mechanisms of cause from the injuries. Medicine, Science and the Law 47 (3) , pp. 200-212. 10.1258/rsmmsl.47.3.200

Worrall, B., Thomas, Andrew Jones, Davies, Alan, John, Elwyn Graham, Itani, Z. and Lewis, G. 2007. Business model changes in relation to strategic developments at Wiltan Ltd: 'Long and Lean' to 'Short and Agile'. Presented at: 37th Conference on Computers and Industrial Engineering, Alexandria, Egypt, pp. 1403-1414.

Wu, Jianzhong

, Ekanyane, J. and Jenkins, Nicholas

2007. Implications for the UK of CVPP and TVPP. [Project Report].

Wu, Jianzhong

and Jenkins, Nicholas

2007. State-of-the-art of the service restoration problem. [Project Report].

Wu, Jianzhong

and Yu, Y. 2007. Self-adaptive load estimation method for distribution networks. Proceedings of the CSU-EPSA 19 (1) , pp. 25-30.

X

Xavier, P. and Wilson, Catherine

2007. Double-averaging flow characteristics around cylinders: The effect of selective sampling. Presented at: 32nd IAHR Congress Conference Proceedings, Venice, Italy,

Xia, Y. Q., Liu, G. P., Shi, P., Chen, J., Rees, D. and Liang, Jun

2007. Sliding mode control of uncertain linear discrete time systems with input delay. Control Theory and Applications, IET 1 (4) , pp. 1169-1175. 10.1049/iet-cta:20060479

Xiao, Q. Z. and Karihaloo, Bhushan Lal

2007. An overview of a hybrid crack element and determination of its complete displacement field. Engineering Fracture Mechanics 74 (7) , pp. 1107-1117. 10.1016/j.engfracmech.2006.12.022

Xiao, Q. Z., Karihaloo, Bhushan Lal

and Liu, X. Y. 2007. Incremental-secant modulus iteration scheme and stress recovery for simulating cracking process in quasi-brittle materials. International Journal for Numerical Methods in Engineering 69 , pp. 2606-2635. 10.1002/nme.1866

Y

Yang, Y., Zhao, Y. Q., Babatunde, Akintunde and Kearney, P. 2007. Co-conditioning of digested excess activated sludge with alum sludge: Benefit of phosphorus reduction in reject water. Proceedings of the Water Environment Federation, Nurtrient Removal 2007 2007 , pp. 64-80. 10.2175/193864707787976669

Yang, Y., Zhao, Y. Q., Babatunde, Akintunde and Kearney, P. 2007. Co-conditioning of the anaerobic digested sludge of a municipal wastewater treatment plant with alum sludge: Benefit of phosphorus reduction in reject water. Water Environment Research 79 (13) , pp. 2468-2476. 10.2175/106143007X184753

Yao, X. G., Moses, Anthony John, Sagarduy, J. and Anayi, Fatih Jamel

2007. Influence of switching frequency on eddy-current losses in a three-limb transformer core subjected to PWM voltage excitation. Presented at: International Conference on Power Engineering, Energy and Electrical Drives (POWERENG 2007), Setubal, Portugal, pp. 324-329.

Yao, X., Moses, Anthony John and Anayi, Fatih Jamel

2007. Normal flux distribution in a three-phase transformer core under sinusoidal and PWM excitation. IEEE Transactions on Magnetics 43 (6) , pp. 2660-2662. 10.1109/TMAG.2007.893782

Yi, Lan 2007. Decision support system for the environmental impact of e-business. PhD Thesis, Cardiff University.

Yi, X., Duan, H. L., Karihaloo, Bhushan Lal

and Wang, J. 2007. Eshelby formalism for multi-shell nano-inhomogeneities. Archive of Mechanics 59 (3) , pp. 259-281.

Yokoi, Kensuke

2007. Efficient implementation of THINC scheme: a simple and practical smoothed VOF algorithm. Journal of Computational Physics 226 (2) , pp. 1895-2002. 10.1016/j.jcp.2007.06.020

Yu, Qiang 2007. Frequency synchronization techniques in wireless communication. PhD Thesis, Cardiff University.

Yu, Yi-xin, Wang, Dong-tao, Wang, Cheng-shan, Jia, Hong-jie, Wu, Jianzhong

, Wei, Wei, Seng, Yuan, Wang, Shou-xiang, Wang, Fei, Fu, Chuan, Feng, Zhao-fei, Zhang, Jing-yu and Wang, Ying-hu 2007. Framework of security region based probabilistic security assessment for power transmission system. Journal of Tianjin University 40 (6) , pp. 699-703.

Yuan, S., Ye, K., Xiao, C., Williams, Frederic Ward and Kennedy, David

2007. Exact dynamic stiffness method for frames with non-uniform Timoshenko beam vibrations and Bernoulli-Euler column buckling. Journal of Sound and Vibration 303 , pp. 526-537. 10.1016/j.jsv.2007.01.036

Yuan, Dekui 2007. Development of an integrated hydro-environmental model and its application to a macro-tidal estuary. PhD Thesis, Cardiff University.

Yuan, D., Lin, BinLiang