Browse by Schools (by year)

and Boubekeru, A. 2010. Investigation on emitted energy during breakdown in transformer oil under AC voltage. Presented at: 45th International Universities Power Engineering Conference, Cardiff, UK, 31 August - 3 September 2010. 2010 45th International Universities Power Engineering Conference (UPEC 2010). London: Institute of Electrical and Electronics Engineers (IEEE), pp. 628-631.

Abdulgawad, Fathia 2010. Field and laboratory investigations of the adsorption of nitrogen compounds on estuarine based sediments. PhD Thesis, Cardiff University.

Adam, J. M., Brencich, A., Hughes, Timothy Giffin and Jefferson, Anthony Duncan

2010. Micromodelling of eccentrically loaded brickwork:study of masonry wallettes. Engineering Structures 32 (5) , pp. 1244-1251. 10.1016/j.engstruct.2009.12.050

Adhikari, Dia, Hepburn, D. M. and Stewart, B. G. 2010. Analysis of partial discharge characteristics in artificially created voids. Presented at: IEEE International Universities Power Engineering Conference (UPEC), Cardiff, Wales, 31 August - 3 September 2010. Universities Power Engineering Conference (UPEC), 2010 45th International. IEEE, pp. 1-4.

Aghamoradi, F, McGregor, I and Elgaid, K

2010. H-Band elevated CPW band-pass filters on GaAs substrate. Presented at: 40th European Microwave Conference 2010, Paris, France, 28-30 September 2010. Proceedings 40th European Microwave Conference 2010. IEEE, -. 10.23919/EUMC.2010.5616390

Ahmad Akbari, R., Bagri, A. B., Bordas, Stephane Pierre Alain

and Rabczuk, T. 2010. Analysis of thermoelastic waves in a two-dimensional functionally graded materials domain by the Meshless Local Petrov-Galerkin (MLPG) method. Computer Modeling in Engineering and Science 65 (1) , pp. 27-74.

Ahmadi, Seyed Javad, Noorikalkhoran, Omid

and Shirvani-Arani, Simindokht 2010. Synthesis and characterization of new ion-imprinted polymer for separation and preconcentration of uranyl (UO22+) ions. Journal of Hazardous Materials 175 (1-3) , pp. 193-197. 10.1016/j.jhazmat.2009.09.148

Ahmadian, R., Morris, C. and Falconer, Roger Alexander

2010. Hydro-environmental modelling of off-shore and coastally attached impoundments off the North Wales Coast. Presented at: 1st European IAHR Congress, Edinburgh, UK, 4-6 May 2010. Proceedings of the 1st European IAHR Congress. Heriot Watt University Press,

Ahmadian, Reza

and Lin, Binliang

2010. Hydro-environmental modeling of the proposed Severn barrage. Proceedings of the Institution of Civil Engineers Energy 163 (3) , pp. 107-117. 10.1680/ener.2010.163.3.107

Ahmed, Nuredin, Aref, Ibrahim, Rodríguez-Salazar, Fernando and Elgaid, Khaled

2010. Network performance evaluation based on SoC design methodology. Presented at: 7th International Symposium on Communication Systems, Networks & Digital Signal Processing (CSNDSP 2010), 21-23 July 2010. Communication Systems, Networks and Digital Signal Processing, CNSDSP, International Symposium on. IEEE, -.

Akbari Rahimabadi, Ahmad, Bagri, A., Rabczuk, T. and Bordas, Stephane Pierre Alain

2010. MLPG for thermo-mechanical wave propagation in functionally graded materials. Computer Modeling in Engineering and Science 73 (4) , pp. 331-355.

Akmal, M., Lees, Jonathan

, Bensmida, S., Woodington, S., Carrubba, V., Cripps, Stephen Charles

, Morris, K., Beach, M., McGeehan, J. and Tasker, Paul

2010. The effect of baseband impedance termination on the linearity of GaN HEMTs. Presented at: European Microwave Conference 2010, Paris, France, (561636) pp. 1046-1049.

Akmal, M., Lees, Jonathan

, Bensmida, S., Woodlington, S., Benedikt, Johannes

, Morris, K., Beach, M., McGeehan, J. and Tasker, Paul

2010. The impact of baseband electrical memory effects on the dynamic transfer characteristics of microwave power transistors. Presented at: 2010 Workshop on Integrated Nonlinear Microwave and Millimetre-Wave Circuits (INMMIC), Gothenburg, Sweden, (548011) pp. 148-151.

Akmal, Muhammad, Lees, Jonathan

, Carrubba, Vincenzo, Bensmida, S., Woodington, S., Benedikt, Johannes

, Morris, K, Beach, M., McGeehan, J. and Tasker, Paul J.

2010. Minimization of baseband electrical memory effects in GaN HEMTs using active IF load-pull. Presented at: Asia-Pacific Microwave Conference (22nd : 2010), Yokahama-shi, Japan, 7-10 December 2010. 2010 Asia-Pacific Microwave Conference proceedings : APMC 2010 : Dec. 7-10, Yokohama, Japan. Tokyo, Japan: Institute of Electronics, Information and Communication Engineers (IEICE), pp. 5-8.

Al-Enezi, E., Al-Osairi, Y., Bockelmann-Evans, Bettina Nicole

and Falconer, Roger Alexander

2010. Modelling of phosphorous adsorption in estuarin sediments. Presented at: Proceedings of 6th International Symposium on Environmental Hydraulics, Athens, Greece, , vol.2 CRC Press, pp. 759-764.

Al-Hadidi, Ahmed 2010. An exploratory study on adoption and diffusion of m-government services in the Sultanate of Oman. PhD Thesis, Cardiff University.

Al-Hadidi, A. and Rezgui, Yacine

2010. Adoption and Diffusion of m-Government: Challenges and Future Directions for Research. Presented at: Proceedings of the 11th IFIP Working Conference on Virtual Enterprises, Saint-Etienne, France,

Al-Hadidi, A., Rezgui, Yacine

and Hopfe J, Christina 2010. The Economic and Social Impact of Electronic Services on the Public and Private Sectors. Presented at: Literature Review: Proceedings of the 10th European Conference on e-Government, Limerick, Ireland,

Al-Osairi, Y., Falconer, Roger Alexander

and Imberger, J 2010. Three-dimensional modelling hydro-enviromental modelling of the Arabian (or Persian) Gulf. Presented at: Proceedings of 9th International Conference on Hydroinformatics, Tianjin, China, , vol.1 Chemical Industry Press, pp. 132-138.

Alel, A., Kwan, Alan Shu Khen

and Miles, J. C. 2010. Gains and losses of information when collaborating remotely over a network communication in the construction industry. Presented at: 13th International Conference on Computing in Civil and Building Engineering (ICCBE 2010) and 17th International EG-ICE Workshop on Intelligent Computing in Engineering (ICE10), Nottingham, UK, 30 June - 2 July 2010. Published in: Tizani, W. ed. Computing in Civil and Building Engineering, Proceedings of the International Conference. Nottingham: Nottingham University Press, pp. 303-304.

Alghanim, A., Benedikt, Johannes

and Tasker, Paul

2010. Effect of low frequency memory on high power 12W LDMOS transistors intermodulation distortion. Proceedings of the World Academy of Science, Engineering and Technology 63 , pp. 53-57.

Allix, O., Kerfriden, Pierre

and Gosselet, P. 2010. On the control of the load increments for a proper description of multiple delamination in a domain decomposition framework. International Journal for Numerical Methods in Engineering 83 (11) , pp. 1518-1540. 10.1002/nme.2884

Allix, O., Kerfriden, Pierre

and P., Gosselet 2010. A relocalization technique for the multiscale computation of delamination in composite structures. Computer Modeling in Engineering and Science 55 (3) , pp. 271-292.

Almuhaisen, Abdullah, Wright, Peter Thomas, Lees, Jonathan

, Cripps, Stephen Charles

and Benedikt, Johannes

2010. Novel wide band high-efficiency active harmonic injection power amplifier concept. Presented at: IEEE MTT-S International Microwave Symposium, Anaheim, CA, USA, 23-28 May 2010. 2010 IEEE MTT-S International Microwave Symposium Digest (MTT 2010). New York: IEEE, pp. 664-667. 10.1109/MWSYM.2010.5514759

Alonso, M., Kay, Peter John, Bowen, Philip John

, Gilchrist, R. and Sapsford, S. 2010. A laser induced fluorescence technique for quantifying transient liquid fuel films utilising total internal reflection. Experiments in Fluids 48 (1) , pp. 133-142. 10.1007/s00348-009-0720-8

Alyami, M., Grosvenor, Roger Ivor

and Prickett, Paul William

2010. A Microcontroller-based Approach to Monitoring Pneumatic Actuators. International Journal of Production Research 48 (11) , pp. 3193-3205. 10.1080/00207540902812102

Ang, Mei, Pham, Duc Truong, Soroka, Anthony John

and Ng, Kok 2010. PCB assembly optimisation using the Bees Algorithm enhanced with TRIZ operators. Presented at: 36th Annual Conference of the IEEE Industrial Electronics Society, Glendale, AZ, USA, 7-10 November 2010. Proceedings - IECON 2010 - 36th Annual Conference on IEEE Industrial Electronics Society, Glendale, AZ, 7-10 Nov. 2010. Los Alamitos, CA: IEEE, pp. 2708-2713. 10.1109/IECON.2010.5675114

Aref, Ibrahim, Ahmed, Nuredin, Rodríguez-Salazar, Fernando and Elgaid, Khaled

2010. Measuring and optimising convergence and stability in terms of system construction in systemC. Presented at: 2010 17th IEEE International Conference and Workshops on Engineering of Computer Based Systems (ECBS), Oxford, 22-26 March 2010. p. 263. 10.1109/ECBS.2010.36

Aref, Ibrahim, Ahmed, Nuredin, Rodríguez-Salazar, Fernando and Elgaid, Khaled

2010. Modeling of flocking behaviour system in SystemC. Presented at: Sixth Advanced International Conference on Telecommunications, Barcelona, Spain, 9-15 May 2010. 2010 Sixth Advanced International Conference on Telecommunications. IEEE, p. 358. 10.1109/AICT.2010.29

Aref, Ibrahim, Ahmed, Nuredin, Rodriguez-Salazar, Fernando and Elgaid, Khaled

2010. Wireless extension into existing SystemC design methodology. Presented at: 2010 2nd International Conference on Computer Engineering and Technology (ICCET), Chengdu, China, 16-18 April 2010. Computer Engineering and Technology (ICCET). V3-374. 10.1109/ICCET.2010.5485893

Arulampalam, G., Ramtharan, G., Ekanayake, Janaka Bandara

, Tennakoon, A. P., Abeyratna, S. G. and Jenkins, Nicholas

2010. Fault ride through the operation of a DFIG wind farm connected through VSC HVDC. Presented at: 5th International Conference on Industrial and Information Systems (ICIIS), Karnataka Surathkal, India,

Ashley, T., Emeny, M. T., Hayes, D. G., Hilton, K. P., Jefferies, R., Maclean, J. O., Smith, S. J., Tang, A. W-H, Wallis, David J.

and Webber, P. J. 2010. High-performance InSb based quantum well field effect transistors for low-power dissipation applications. Presented at: 2009 IEEE International Electron Devices Meeting (IEDM), Baltimore, MD, USA, 7-9 December 2009. 2009 IEEE International Electron Devices Meeting (IEDM). IEEE, p. 1. 10.1109/IEDM.2009.5424207

Aubrey, Andrew, Hicks, Yulia Alexandrovna

and Chambers, J. 2010. Visual voice activity detection with optical flow. IET Image Processing 4 (6) , pp. 463-472. 10.1049/iet-ipr.2009.0042

Awad, B., Ekanayake, Janaka Bandara

2010. Intelligent load control for frequency regulation in MicroGrids. Intelligent Automation and Soft Computing 16 (2) , pp. 303-318.

Ayre, W.

, Howell, M., Madete, J. K., Jones, D. K. and Holt, Catherine Avril

2010. Quantifying manual and bi-manual tasks using motion capture for brain imaging. Presented at: 9th International Conference on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Azimoh, L., Folly, K., Chowdhury, S. P., Chowdhury, S. and Haddad, Abderrahmane

2010. Investigation of voltage and transient stability of HVAC power link in hybrid network with VSC-HVDC and HVDC link. Presented at: 45th International Universities Power Engineering Conference (UPEC), Cardiff, UK, 31 August - 3 September 2010. 2010 45th International Universities Power Engineering Conference (UPEC 2010). London: Institute of Electrical and Electronics Engineers, pp. 257-262.

B

Babatunde, Akintunde 2010. Engineered Wetlands: Concept, design and development of an alum sludge-based constructed wetland system. VDM Verlag Dr. Müller.

Babatunde, Akintunde and Zhao, Y. Q. 2010. Equilibrium and kinetic analysis of phosphorus adsorption from aqueous solution using waste alum sludge. Journal of Hazardous Materials 184 (1-3) , pp. 746-752. 10.1016/j.jhazmat.2010.08.102

Babatunde, Akintunde and Zhao, Y. Q. 2010. Leachability and leaching patterns from aluminium-based water treatment residual used as media in laboratory-scale engineered wetlands. Environmental Science and Pollution Research 17 (7) , pp. 1314-1322. 10.1007/s11356-010-0311-5

Babatunde, Akintunde and Zhao, Y. Q. 2010. Two strategies for improving animal farm wastewater treatment in reed beds. Environmental Technology 31 (12) , pp. 1343-1348. 10.1080/09593331003720623

Babatunde, Akintunde, Zhao, Y. Q. and Zhao, X. H. 2010. Alum sludge-based constructed wetland system for enhanced removal of P and OM from wastewater: Concept, design and performance analysis. Bioresource Technology 101 (16) , pp. 6576-6579. 10.1016/j.biortech.2010.03.066

Babatunde, Akintunde and Zhao, Yaqian 2010. Five decades of constructed wetland technology: Knowledge overload, wisdom underload and the emergence of 4th generation systems. Presented at: Irish International Conference on Constructed Wetlands for Wastewater Treatment & Environmental Pollution Control, University College Dublin, 1st-2nd October 2010. Published in: Zhao, Yaqian and Babatunde, Akintunde eds. Proceedings of 2nd Irish International Conference on Constructed Wetlands for Wastewater Treatment & Environmental Pollution Control, Dublin, Ireland, 1-2 October 2010. Dublin: University College Dublin, pp. 2-4.

Bag, R., Tripathy, Snehasis

and Thomas, H. R. 2010. Behaviour of compacted MX80 bentonite under thermo-hydraulic gradients. Presented at: Proceedings of 6th International Congress on Environmental Geotechnics (6ICEG), New Delhi, India, Published in: Datta M Ramana G, Srivastava R K ed. pp. 1401-1404.

Bagdanavicius, Audrius 2010. Premixed combustion of alternative fuels under varying conditions of temperature and pressure. PhD Thesis, Cardiff University.

Bagdanavicius, Audrius, Shelil, Nasser, Syred, Nicholas and Griffiths, Anthony John 2010. Premixed swirl combustion and flashback analysis with hydrogen/methane mixtures. Presented at: 47th AIAA Aerospace sciences meeting, Orlando, USA, (AIAA-2)

Bagdanavicius, Audrius, Bowen, Philip John

, Syred, Nicholas, Kay, Peter John, Crayford, Andrew Philip

, Wood, J. and Sims, G. 2010. Burning velocities of alternative gaseous fuels at elevated temperature and pressure. AIAA Journal 48 (2) , pp. 317-329. 10.2514/1.43225

Bagdanavicius, Audrius, Shelil, Nasser, Bowen, Philip John

, Syred, Nicholas and Crayford, Andrew Philip

2010. Investigations of gaseous alternative fuels at atmospheric and elevated temperature and pressure conditions. Presented at: ASME Turbo Expo 2010, Glasgow, UK,

Bagdanavicius, Audrius, Shelil, Nasser, Syred, Nicholas, Griffiths, Anthony John and Bowen, Philip John

2010. Premixed swirl combustion and flashback analysis with hydrogen/methane mixtures. Presented at: 48th AIAA Aerospace Sciences Meeting, Orlando, USA,

Baille, W., Tripathy, Snehasis

and Schanz, T. 2010. Swelling pressures and one-dimensional compressibility behaviour of bentonite at large pressures. Applied Clay Science 48 (3) , pp. 324-333. 10.1016/j.clay.2010.01.002

Baiz, P. M., Natarajan, S., Kerfriden, Pierre

, Bordas, Stephane Pierre Alain

and Rabczuk, T 2010. Linear buckling analysis of cracked isotropic plates using the extended finite element method. Presented at: 18th UK conference on Computational Mechanics (ACMEUK), Southampton, UK,

Balehosur, M.B., Marketos, P. and Moses, Anthony John 2010. Packet to packet variation of flux density in a 3 phase, 3 limb power transformer core. IEEE Transactions on Magnetics 46 (2) , pp. 642-645. 10.1109/TMAG.2009.2033021

Bartlett, Paul Andrew, Lea, S., Meydan, Turgut

, Williams, Paul Ieuan

, Landini, G, Walmsley, A. D. and Moses, Anthony John 2010. Generated vibration modes in ultrasonic dental scaler transducer components. Presented at: 8th European Conference on Sensors and Actuators, Bodrum, Turkey, 4-7 July 2010. 8th European Conference on Sensors and Actuators(Abstract Book). WP.91.

Bedoui, S., Baydi, A. and Haddad, Abderrahmane

2010. Analysis of lightning protection with transmission line arrester using ATP/EMTP: Case of an HV 220kV double circuit line. Presented at: 45th International Universities Power Engineering Conference, Cardiff, UK, 31 August - 3 September 2010. 2010 45th International Universities Power Engineering Conference (UPEC 2010). London: Institute of Electrical and Electronics Engineers (IEEE), pp. 1176-1181.

Beex, Lars

, Peerlings, Ron H. J. and Geers, Marc G. D. 2010. Sampling point selection for energy estimation in the quasicontinuum method. Presented at: 5th International Conference on Multiscale Materials Modeling (MMM 2010), Freiburg, Germany, 4-8 October 2010. Published in: Gumbsch, P. ed. Proceedings of the Fifth International Conference Multiscale Materials Modeling MMM2010. Freiburg: Fraunhofer Verlag, pp. 23-26.

Bell, W., Colley, James, Gwynne, J. R., Glazier, P., Evans, William D.

and Darlington, Sarah E. 2010. ACE ID genotype and leg power in Rugby Union players. Journal of Sports Medicine and Physical Fitness 50 (3) , pp. 350-355.

Bell, W., Evans, W. D.

and Darlington, S. E. 2010. Geometry of the femoral neck and the lumbar spine: the effect of atypical high-impact modalities between playing units in young adult male rugby union football players. International Journal of Body Composition Research 8 , pp. 95-102.

Bennett, Anthony

, Patel, Raj B., Skiba-Szymanska, Joanna, Nicoll, Christine A., Farrer, Ian, Ritchie, David A. and Shields, Andrew J. 2010. Giant Stark effect in the emission of single semiconductor quantum dots. Applied Physics Letters 97 (3) , 031104. 10.1063/1.3460912

Bennett, Anthony

, Pooley, M. A., Stevenson, R. M., Ward, M. B., Patel, R. B., Boyer de la Giroday, A., Sköld, N., Farrer, I., Nicoll, C. A., Ritchie, D. A. and Shields, A. J. 2010. Electric-field-induced coherent coupling of the exciton states in a single quantum dot. Nature Physics 6 (12) , pp. 947-950. 10.1038/nphys1780

Bensmida, S., Morris, K., Akmal, Muhammad, Lees, Jonathan

, Wright, Peter Thomas, Benedikt, Johannes

, McGeehan, J. and Beach, M. 2010. Generic pre-distortion of a Class-J Power amplifier. Presented at: European Microwave Conference 2010, Paris, France, (561648) pp. 1022-1025.

Beynon, M. J., Whatling, Gemma Marie

2010. CaRBS analyses of gait features following lateral and posterior approaches to THA. Presented at: 17th Congress of the European Society of Biomechanics, Edinburgh, UK,

Beynon, M., Whatling, Gemma Marie

, Carley, Albert Frederick, Davies, Philip Rosser

2010. CaRBS analysis of total hip arthroplasty. Presented at: 9th International Conference on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Bhaduri, Debajyoti

and Chattopadhyay, A.K. 2010. Effect of pulsed DC CFUBM sputtered TiN coating on performance of nickel electroplated monolayer cBN wheel in grinding steel. Surface and Coatings Technology 204 , pp. 3818-3832. 10.1016/j.surfcoat.2010.04.063

Bhaduri, Debajyoti

and Chattopadhyay, A.K. 2010. On performance improvement of electroplated monolayer cBN wheel using pulsed DC CFUBM sputtered TiN coating. Presented at: Recent Advances in Manufacturing Technology and Management, RAMTM, Kolkata, India, 19 February 2010. Proceedings of National Conference on Recent Advances in Manufacturing Technology and Management.

Bhaduri, Debajyoti

and Chattopadhyay, A.K. 2010. Study on the role of PVD TiN coating in improving the performance of electroplated monolayer superabrasive wheel. Surface and Coatings Technology 205 , pp. 658-667. 10.1016/j.surfcoat.2010.07.089

Bhaduri, Debajyoti

, Ghosh, A., Gangopadhyay, S. and Paul, S. 2010. Effect of target frequency, bias voltage and bias frequency on microstructure and mechanical properties of pulsed DC CFUBM sputtered TiN coating. Surface and Coatings Technology 204 , pp. 3684-3697. 10.1016/j.surfcoat.2010.04.047

Bhaduri, Debajyoti

, Kumar, R., Jain, A.K. and Chattopadhyay, A.K. 2010. On tribological behaviour and application of TiN and MoS2-Ti composite coating for enhancing performance of monolayer cBN grinding wheel. Wear 268 , pp. 1053-1065. 10.1016/j.wear.2010.01.013

Bhaduri, Debajyoti

, Mitra, S and Saha, J 2010. Study of cutting tool forces and nature of chip in turning of AISI 1040 steel. Journal of Modern Manufacturing Technology 2 (2) , pp. 161-172.
Item availability restricted.

Bhattarai, R., Haddad, Abderrahmane

, Griffiths, Huw and Harid, Noureddine

2010. Voltage uprating of overhead transmission lines. Presented at: 45th International Universities Power Engineering Conference, Cardiff, UK, 31 August - 3 September 2010. 2010 45th International Universities Power Engineering Conference (UPEC 2010). London: Institute of Electrical and Electronics Engineers (IEEE), pp. 348-353.

Bigot, Samuel

, Dimov, Stefan Simeonov and Minev, R. 2010. Function and length scale integration study in emerging MST-based products. Presented at: 5th IPAS Fifth International Precision Assembly Seminar, Chamonix, France,

Bihs, H., Olsen, N. R. B. and Stoesser, Thorsten

2010. Calculation of secondary flow in a straight open channel with RANS and LES. Presented at: 6th International Symposium on Environmental Hydraulics, Athens, Greece, 23-25 June 2010.

Bordas, Stephane Pierre Alain

and Natarajan, S. 2010. On the approximation in the smoothed finite element method (SFEM). International Journal for Numerical Methods in Engineering 81 (5) , pp. 660-670. 10.1002/nme.2713

Bordas, Stephane Pierre Alain

, Rabczuk, T., Hung, N.X., Nguyen, V.P., Natarajan, S., Bog, T., Quan, D.M. and Hiep, N.V. 2010. Strain smoothing in FEM and XFEM. Computers and Structures 88 (23-24) , pp. 1419-1443. 10.1016/j.compstruc.2008.07.006

Bordas, Stephane Pierre Alain

, Rabczuk, T., Rodenas, J. J., Kerfriden, Pierre

, Moumnassi, M. and Belouettar, S. 2010. Recent advances towards reducing the meshing and re-meshing burden in computational sciences. Topping, B. H. V., Adam, J. M. and Pallares, F. J., eds. Computational technology reviews, Vol. 2. Saxe-Coburg Publications, pp. 51-82. (10.4203/ctr.2.3)

Borodich, Feodor M.

2010. Contact problems at nano/microscale and depth sensing indentation techniques. Materials Science Forum 662 , pp. 53-57. 10.4028/www.scientific.net/MSF.662.53

Borodich, Feodor M.

and Feng, Z. 2010. Scaling of mathematical fractals and box-counting quasi-measure. Zeitschrift für Angewandte Mathematik und Physik (ZAMP) 61 (1) , pp. 21-31. 10.1007/s00033-009-0010-6

Borodich, Feodor M

, Gorb, E. V. and Gorb, S. N. 2010. Fracture behaviour of plant epicuticular wax crystals and its role in preventing insect attachment: a theoretical approach. Applied Physics A - Materials Science and Processing 100 (1) , pp. 63-71. 10.1007/s00339-010-5794-x

Bowker, Michael

, Broughton, Melissa Anne, Carley, Albert Frederick, Davies, Philip Rosser

, Morgan, David John

, Crouch, Jonathan James, Lalev, Georgi Maximov, Dimov, Stefan Simeonov and Pham, Duc Truong 2010. Influence of thermal treatment on nanostructured gold model catalysts? Langmuir 26 (21) , pp. 16261-16266. 10.1021/la101372w

Bowker, Michael

, Morgan, David John

, Crouch, Jonathan James, Lalev, Georgi Maximov, Dimov, Stefan Simeonov and Pham, Duc Truong 2010. Effects of the nanostructuring of gold films upon their thermal stability. Acs Nano 4 (4) , pp. 2228-2232. 10.1021/nn901614e

Britton, A. and Setchi, Rossitza

2010. Intuitive interaction with multifunctional smartphone interfaces. Presented at: I*PROMS'10 Innovative Production Machines and Systems, Cardiff, UK,

Brousseau, Emmanuel Bruno Jean Paul

, Barton, R., Dimov, Stefan Simeonov and Bigot, Samuel

2010. A methodology for evaluating the technological maturity of micro and nano fabrication processes. Presented at: Fifth International Precision Assembly Seminar, IPAS 2010, Chamonix, France, pp. 329-336.

Brousseau, Emmanuel Bruno Jean Paul

, Dimov, Stefan Simeonov and Pham, Duc Truong 2010. Some recent advances in multi-material micro- and nano- manufacturing. International Journal of Advanced Manufacturing Technology 47 (1-4) , pp. 161-180. 10.1007/s00170-009-2214-5

Brousseau, Emmanuel Bruno Jean Paul

, Krohs, F., Caillaud, E., Dimov, Stefan Simeonov, Gibaru, O. and Fatikow, S. 2010. Development of a novel process chain based on Atomic Force Microscopy scratching for small and medium series production of polymer nanostructured components. Journal of Manufacturing Science and Engineering 132 (3) , pp. 305-315. 10.1115/1.4001481

Brousseau, Emmanuel Bruno Jean Paul

, Scholz, S. and Rees, A. 2010. Fabrication of 3D structures using Atomic Force Microscopy scratching. Presented at: Sixth International Conference on Multi-Material Micro Manufacture, 4M2010, Oyonnax, France, pp. 65-68.

Brownsword, Mike 2010. A formalised approach to the management of risk: a conceptual framework and an ontology. International Journal of Knowledge and Systems Science 1 (4) , 01-Dec. 10.4018/jkss.2010100101

Buabbas, H., Medjdoub, B. and Rezgui, Yacine

2010. Hidden parts in the history of the school library. Library Review 59 (6) , pp. 401-413. 10.1108/00242531011053922

C

Cahill, L., McCarthy, C., Bordas, Stephane Pierre Alain

, Natarajan, S., Dal Pont, S. and Kerfriden, Pierre

2010. Enriched finite elements (xfem) for multi-crack growth simulations in orthotropic materials. Presented at: 4th European Congress on Computational Mechanics (ECCM IV): Solids, Structures and Coupled Problems in Engineering, Paris, France,

Cahill, L., Naatarajan, S., McCarthy, C. and Bordas, Stephane Pierre Alain

2010. XFEM modelling of delamination in composite materials. Presented at: 18th UK conference on Computational Mechanics (ACMEUK), Southampton, UK,

Caliao, N. D., Ramtharan, G., Ekanayake, Janaka Bandara

2010. Power oscillation damping controller for fully rated converter wind turbines. Presented at: Proceedings of the Universities Power Engineering Conference, Cardiff, UK, (565438)

Cameron, I. D., Robinovitch, S. N., Birge, S., Kannus, P., Khan, K., Lauritzen, J., Howland, J., Evans, Samuel Lewin

, Minns, J., Laing, A C, Cripton, P.A., Derler, S., Plant, D. and Kiel, D.P. 2010. Hip protectors: recommendations for clinical trials - an international consensus statement (part II). Osteoporosis International 21 (1) , 01-10. 10.1007/s00198-009-1055-2

Cannella, S., Ciancimino, E., Canca Ortiz, D. and Setchi, Rossitza

2010. Production inventory and enterprise system implementation: an ex-ante no-cost based evaluation. Lecture Notes in Business Information Processing 47 (Part 8) , pp. 291-303. 10.1007/978-3-642-12814-1_25

Carradore, L., Turri, R., Cipcigan Mirela, Liana

and Papadopoulos, P. 2010. Electric Vehicles as flexible energy storage systems in power distribution networks. Presented at: International Conference on Ecologic Vehicles and Renewable Energies, Monte-Carlo, France,

Carrubba, V., Clarke, A. L., Akmal, M., Lees, Jonathan

, Tasker, Paul

and Cripps, Stephen Charles

2010. The continuous Class-F Mode mode power amplifier. Presented at: European Microwave Conference (EuMC) 2010, Paris, France, (561630) pp. 1674-1677.

Carruthers-Watt, Benjamin Nigel, Xue, Yiqin and Morris, A. J 2010. A vision based system for strip tracking measurement in the finishing train of a hot strip mill. Presented at: IEEE International Conference on Mechatronics and Automation, Xi'an, China, 4-7 August 2010. The 2010 IEEE International Conference on Mechatronics and Automation (August 4-7, 2010, Xi'an, China). Piscataway, NJ: IEEE, pp. 1115-1120. 10.1109/ICMA.2010.5589402

Charalampidis, Panagiotis, Haddad, Abderrahmane

, Waters, Ronald T., Griffiths, Huw, Harid, Noureddine

and Sarkar, P. 2010. Five-electrode inclined plane tests of textured silicone rubber samples. Presented at: 45th International Universities Power Engineering Conference, Cardiff, UK, 31 August-3 September 2010. 2010 45th International Universities Power Engineering Conference (UPEC 2010). Institute of Electrical and Electronics Engineers (IEEE), pp. 311-315.

Charron, C. and Hicks, Yulia Alexandrovna

2010. An evolving MOG for online image sequence segmentation. Presented at: IEEE International Conference on Image processing (ICIP 2010), Hong Kong, China,

Chaudry, Modassar

, Qadrdan, Meysam

2010. Economic impacts of wind generation variability on gas network operation. Presented at: 8th BIEE Academic Conference, Oxford, Oxford, UK, 22-23 September 2010. Proceedings of the 8th British Institute of Energy Economics Academic Conference, September 22-23, 2010 (Oxford, UK). British Institute of Energy Economics,

Che, Bin, Kennedy, David

and Featherston, Carol Ann

2010. Improved exact strip postbuckling analysis for anisotropic plates with fixed, free and straight edges. Presented at: 28th International Congress of the Aeronautical Sciences, Brisbane, Australia, 23 - 28 September 2010. Proceedings of 28th Congress of the Aeronautical Sciences. pp. 1-15.

Chen, Yongping, Pan, Shunqi

, Hewston, Richard, Cluckie, Ian and Wolf, Judith 2010. Ensemble modelling of tides, surge and waves. Presented at: 20th International Offshore and Polar Engineering Conference, Beijing, China, 20-25 June 2101. Published in: Chung, Jin S., Dias, Frederic, Kuo, Jui-Fang and Ma, Qingwei eds. Proceedings of the Twentieth (2010) International Offshore and Polar Engineering Conference, Beijing, China, 20-25 June 2010. , vol.3 Cupertino, CA, USA: International Society of Offshore and Polar Engineers (ISOPE), pp. 828-833.

Chen, Yongping, Pan, Shunqi

, Wolf, Judith and Du, Yanliang 2010. Downscaling effects on modelling waves, tides and storm surge. Proceedings of the International Conference on Coastal Engineering 32 , waves.33.

Chen, Hui, Miles, John Christopher and Kwan, Alan Shu Khen

2010. Two-Human CardiffGA: A new Multiple population genetic algorithm. Presented at: 2nd International Conference on Computer and Automation Engineering, Singapore, 26-28 February 2010. Published in: Mahadeven, V and Zhou, H. H. eds. Proceedings 2nd International Conference on Computer and Automation Engineering (ICCAE 2010), Singapore. , vol.1 Piscataway, NJ: IEEE, pp. 267-271.

Cheung, W., Mahmud, J., Evans, Samuel Lewin

, Wang, B. and Chizari, M. 2010. Evaluating the mechanical properties of tendon graft using digital image correlation (DIC) techniques [Abstract]. Journal of Biomechanics 43 (S1) , S63.

Choi, Heungjae

, Jeong, Yongchae, Kim, Chul Dong and Kenney, J. Stevenson 2010. Efficiency enhancement of feedforward amplifiers by employing a negative group-delay circuit. IEEE Transactions on Microwave Theory and Techniques 58 (5) , pp. 1116-1125. 10.1109/TMTT.2010.2045576

Choi, Heungjae

, Jeong, Yongchae, Kim, Chul Dong and Kenney, James Stevenson 2010. Bandwidth enhancement of an analog feedback amplifier by employing a negative group delay circuit. Progress In Electromagnetics Research 105 , pp. 253-272. 10.2528/PIER10041808

Chukwuchekwa, Nkwachukwu, Moses, Anthony John and Anderson, Philip Ian

2010. Barkhausen Noise in Grain-Oriented 3% Si-Fe AT 50 HZ. Journal of Electrical Engineering 61 (7/s) , pp. 69-72.

Clarke, Alan Leslie, Akmal, Muhammad, Lees, Jonathan

and Benedikt, Johannes

2010. Investigation and analysis into device optimization for attaining efficiencies in-excess of 90% when accounting for higher harmonics. Presented at: IEEE MTT-S International Microwave Symposium, Anaheim, CA, USA, 23-28 May 2010. 2010 IEEE MTT-S International Microwave Symposium Digest (MTT 2010). New York: IEEE, pp. 1114-1117. 10.1109/MWSYM.2010.5517222

Clarke, Alastair

2010. Applications of evolutionary algorithms to the design and set-up of racing cars. Presented at: Seventh International Conference on Engineering Computational Technology, Valencia, Spain, 14-17 September 2010. Published in: Topping, B. H. V., Adam, J. M., Pallarés, F. J., Bru, R. and Romero, M. L. eds. Proceedings of the Seventh International Conference on Engineering Computational Technology. Civil-Comp Proceedings (94) Civil-Comp Press, 10.4203/ccp.94.104

Clarke, Alastair

, Miles, John Christopher and Rezgui, Yacine

2010. Multi-objective decision making for the fire and rescue services – a scoping study. Presented at: 1st Fire Risk Management Conference, Loughborough, UK, 14 April 2010.

Clarke, Alastair

, Miles, John Christopher and Rezgui, Yacine

2010. Strategic fire and rescue service decision making using evolutionary algorithms. Presented at: Seventh International Conference on Engineering Computational Technology, Valencia, Spain, 14-17 September 2010. Published in: Topping, B.H.V., Adam, J. M., Pallarés, F. J., Bru, R. and Romero, M. L. eds. Proceedings of the Seventh International Conference on Engineering Computational Technology. Civil-Comp Proceedings (94) Civil-Comp Press, 10.4203/ccp.94.102

Cleall, Peter John

2010. Ramaswami, Anu and Milford, Jana B. and Small, Mitchell: Integrated environmental modeling: pollutant transport, fate, and risk in the environment [Book Review]. Proceedings of the ICE - Engineering Sustainability 163 (2) , p. 121. 10.1680/ensu.2010.163

Cleall, Peter John

, Thomas, Hywel Rhys

, Li, Y. C., Harris, C. and Kern-Luetschg, M. 2010. Experimental and numerical modelling of soils subjected to seasonal freezing and thawing. Presented at: 6th International Congress on Environmental Geotechnics (6ICEG), New Delhi, India, 8-12 November 2010. Published in: Datta, Manoj ed. Proceedings of the 6th International Congress on Environmental Geotechnics, New Delhi, India. , vol.2 Tata McGraw Hill, pp. 1691-1694.

Crayford, Andrew Philip

, Kay, Peter John, Bowen, Philip John

and Laget, H. 2010. Comparison of Gas-Oil and Bio-Oil Spray Performance for Use in a Gas Turbine. Presented at: ASME American Society of Mechanical Engineers Turbo Expo 2010, Glasgow, UK, (GT2010)

Crespo-Sandova, Milka Jackeline, Haddad, Abderrahmane

, Griffiths, Huw and Coventry, P. F. 2010. Rate of energy absorption as indicator for the tracking/erosion test of silicone rubber. IEEE Transactions on Dielectrics and Electrical Insulation (TDEI) 17 (6) , pp. 1772-1780. 10.1109/TDEI.2010.5658228

Cripps, Stephen Charles

and Porch, Adrian

2010. An active, non-intrusive, high resolution microwave field probe with applications in high power RF device and circuit design. Presented at: 2010 IEEE 11th Annual Wireless and Microwave Technology Conference (WAMICON 2010), Melbourne Beach, USA, (546185)

Crivelli, Davide

2010. Acoustic emission based damage analysis of pultruded glass fiber reinforced materials. Presented at: 9th YSESM, 9th Youth Symposium on Experimental Solid Mechanics, Trieste, Italy, 7-10 July 2010. Published in: Cosmi, Francesca and Iacoviello, Francesco eds. Proceedings of the 9th YSESM "Youth Symposium on Experimental Solid Mechanics". Trieste, Italy: Gruppo Italiano Frattura, pp. 197-200.

Crivelli, Davide

, Guagliano, Mario, Marangoni, Daniele and Monici, Alberto 2010. Fatigue damage analysis of pultruded glass fiber reinforced materials with acoustic emission methods. Presented at: EWGAE 2010, Vienna, Austria, 8-10 September 2010. Proceedings of EWGAE 2010.

Crivelli, Davide

, Tizzoni, Omar, Guagliano, Mario, Cosmi, Francesca and Dreossi, Diego 2010. Microstructural damage assessment of pultruded materials by syncrotrone light tomography. Presented at: 27th Danubia Adria symposium on experimental methods in solid mechanics., Wroclaw, Poland, 22-25 September 2010. Proceedings of the 27th Danubia-Adria Symposium on Advances in Experimental Mechanics.

Cufflin, R. S., Spezi, Emiliano

, Millin, A. E. and Lewis, D. G. 2010. An investigation of the accuracy of Monte Carlo portal dosimetry for verification of IMRT with extended fields. Physics in Medicine and Biology 55 (16) , pp. 4589-4600. 10.1088/0031-9155/55/16/S12

D

Davies, Dyfyr Llywel, Xue, Yiqin, Watton, John and Williams, G. A. 2010. Comparison between experimental and computer modelling results for a pneumatic/hydraulic hybrid cylinder. Presented at: IEEE International Conference on Mechatronics and Automation, Xi'an, China, 4-7 August 2010. International Conference on Mechatronics and Automation (ICMA 2010, Xi'an, China). Piscataway, NJ: Institute of Electrical and Electronics Engineers ( IEEE ), pp. 2004-2008. 10.1109/ICMA.2010.5589197

Davies, Gwyn Robert 2010. SCADA software-based techniques for the management and improvement of industrial efficiency. PhD Thesis, Cardiff University.

Dibley, M., Li, H. and Miles, John Christopher 2010. The application of intelligent agency in a software model for buildings. Presented at: ICCCBE2010 and EG-ICE10, Nottingham, UK,

Dibley, M. J., Li, H.

, Miles, J. C. and Rezgui, Y.

Dibley, Michael, Li, Haijiang

, Miles, John C and Rezgui, Yacine

2010. The application of intelligent agency in a software model for buildings. Presented at: EG-ICE 2010 - 17th International Workshop on Intelligent Computing in Engineering, Nottingham, UK, 30 Jun - 2 Jul 2010. Proceedings of The XVII Workshop for Intelligent Computing in Engineering. Nottingham University Press,

Du, Yanliang, Pan, Shunqi

and Chen, Yongping 2010. Modelling the effect of wave overtopping on nearshore hydrodynamics and morphodynamics around shore-parallel breakwaters. Coastal Engineering 57 (9) , pp. 812-826. 10.1016/j.coastaleng.2010.04.005

E

Ebrahimi, K., Falconer, Roger Alexander

and Lin, BinLiang

2010. Numerical modelling of tidal aquifiers. Presented at: Proceeding of 2nd International Symposium on Environmental Engineering, K.N. Toosi University of Technology Press., Tehran, Iran, pp. 32-37.

El Mghairbi, Ahmed, Harid, Noureddine

, Griffiths, Huw and Haddad, Abderrahmane

2010. A new method to increase the effective length of horizontal earth electrodes. Presented at: 45th International Universities Power Engineering Conference, Cardiff, UK, 31 August - 3 September 2010. 2010 45th International Universities Power Engineering Conference (UPEC 2010). London: Institute of Electrical and Electronics Engineers (IEEE), pp. 802-805.

El-Kaabazi, Nihal Husein and Kennedy, David

2010. Natural frequencies of tapered cylindrical shells by Wittrick-Williams algorithm [Paper 189]. Presented at: 10th International Conference on Computational Structures Technology, Valencia, Spain, 14-17 September 2010. Published in: Topping, B. H. V., Adam, J. M., Pallarés, F. J., Bru, R. and Romero, M. L. eds. Proceedings of the Tenth International Conference on Computational Structures Technology. Civil-Comp Proceedings (93) Stirlingshire, UK: Civil-Comp Press, 10.4203/ccp.93.189

Eldukhri, Eldaw Elzaki and Pham, Duc Truong 2010. Autonomous swing-up control of a three-link robot gymnast. Proceedings of the Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering 224 (7) , pp. 825-832. 10.1243/09596518JSCE948

Elessawi, Elkhadra Abdulmula 2010. Measurement of caesium-137 in the human body using a whole body counter. PhD Thesis, Cardiff University.

Elkaseer, A. M., B., Popov K., Negm, M., Dimov, Stefan Simeonov and R, Minev 2010. Material microstructure effect-based simulation model for the surface generation process in micro-milling. Presented at: 5th International Conference on MicroManufacturing ICOMM/4M 2010, Madison, USA, pp. 19-24.

Elkaseer, Ahmed

, Popov, Krastimir Borisov, Dimov, Stefan Simeonov and Minev, Roussi 2010. Material Microstructure Effect-based Investigation of Tool Wear in Micro-endmilling of Multi-phase Materials. Presented at: 4M2010: 7th International Conference on Multi-Material Micro Manufacture, Oyonnax, France, 17-19 November 2010. Published in: Fillon, B., Khan-Malek, C. and Dimov, Stefan Simeonov eds. Proceedings of the 7th International Conference on Multi-Material Micro Manufacture. Singapore: Research Publishing, pp. 188-191. 10.3850/978-981-08-6555-9_186

Emhemmed, A. S., McGregor, I. and Elgaid, Khaled

2010. Elevated conductor coplanar waveguide-fed three-level proximity-coupled antenna for G-band applications. IET Microwaves, Antennas & Propagation 4 (11) , pp. 1910-1915. 10.1049/iet-map.2009.0616

Espinasse, L., Keer, L., Borodich, Feodor M.

, Yu, H. and Wang, J. 2010. A note on JKR and DMT theories of contact on a transversely isotropic half-space. Mechanics of Materials 42 (4) , pp. 477-480. 10.1016/j.mechmat.2009.08.008

Evans, Henry Peredur

, Clarke, Alastair

, Sharif, Khairi and Snidle, Raymond Walter

2010. The role of heat partition in elastohydrodynamic lubrication. Tribology Transactions 53 (2) , pp. 179-188. 10.1080/10402000903097452

Evans, Henry Peredur

, Sharif, Khairi, Clarke, Alastair

and Snidle, Raymond Walter

2010. The Role of Heat Partition in Elastohydrodynamic Lubrication. Presented at: 5th China International Symposium on Tribology (CIST2008) and 1st International Tribology Symposium of IFToMM (ITS-IFToMM2008), Beijing, China, 24-27 September 2008. Published in: Luo, J., Meng, Y., Shao, T. and Zhao, Q. eds. Advanced Tribology: Proceedings of CIST2008 & ITS-IFToMM2008. Berlin: Springer, pp. 48-49. 10.1007/978-3-642-03653-8_19

Evans, Henry Peredur

and Snidle, Raymond Walter

2010. Micropitting, micro-EHL and mixed lubrication. Presented at: Wind Turbine Micropitting Workshop, Boulder, CO, USA, 15 - 16 April 2009. Published in: Sheng, Shuangwen ed. Wind Turbine Micropitting Workshop: A Recap. NREL/TP National Renewable Energy Laboratory (NREL), pp. 19-21.

Evans, I., Bowen, Philip John

, Kay, Peter John, King, J., Knight, G. and Schmidt, L. 2010. Characterisation of a bio-ethanol direct injection spray under sub-zero conditions. Presented at: 23rd Annual ILASS-Europe Conference (ILASS2010), Brno, Czech Republic,

Evans, Samuel Lewin

2010. The effect of the soft tissues on bone loading during hip fractures. Presented at: 9th International Symposium Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain, 24-27 February 2010. Published in: Middleton, John ed. 9th International Symposium Computer Methods in Biomechanics and Biomedical Engineering 2010, Valencia, Spain, 24-27 February 2010. Solihull: ARUP,

Evans, Samuel Lewin

2010. Effects of intermittent overloads on fatigue of PMMA bone cement. International Journal of Nano and Biomaterials 3 (1) , pp. 65-77. 10.1504/IJNBM.2010.036108

Evans, Samuel Lewin

2010. Errors and uncertainties in the indentation testing of soft tissues. Presented at: International Conference on the Mechanics of Biomaterials and Tissues, Hawaii, USA, 11-15 December 2011.

Everitt, Holly, Evans, Samuel Lewin

, Bigsby, Rob and Khan, Imran 2010. Acetabular component deformation under rim loading using digital image correlation and finite element methods. Presented at: 7th International Conference on Advances in Experimental Mechanics, Liverpool, UK, 7-9 September 2010. Published in: Mines, R. A. W. and Dulieu-Barton, J. M. eds. Advances in Experimental Mechanics VII. Applied Mechanics and Materials. Applied mechanics and materials , vol.24-25 (24-25) Stafa-Zurich: Trans Tech Publications, pp. 275-280. 10.4028/www.scientific.net/AMM.24-25.275

Ewaze, Mohamed Ashour. 2010. Retrofitting of reinforced concrete beams with CARDIFRC in hot climate. PhD Thesis, Cardiff University.

Eyers, Daniel Roy

and Dotchev, Krassimir 2010. Technology review for mass customisation using rapid manufacturing. Assembly Automation 30 (1) , pp. 39-46. 10.1108/01445151011016055

F

Fabre, Agnes, Barrallier, L., Desvignes, M., Evans, Henry Peredur

and Alanou, M. P. 2010. Microgeometrical influences on micropitting fatigue damage: multiscale analysis. Presented at: 37th Leeds- Lyon Symposium on Tribology, Leeds, UK, 7-10 September 2010.

Fadzli, S. A. and Setchi, Rossitza

2010. A semantic approach to text-based image retrieval using a lexical ontology. Presented at: International conference on Kansei Engineering and Emotion research (KEER2010), Paris, France,

Fadzli, Syed Abdullah and Setchi, Rossitza

2010. Semantic approach to image retrieval using statistical models based on a lexical ontology. Lecture Notes in Computer Science 6279 , pp. 240-250.

Fadzli, Syed Abdullah and Setchi, Rossitza

2010. Semantic approach to image retrieval using statistical models based on a lexical ontology. Lecture Notes in Computer Science 6279 , pp. 240-250.

Faghihirad, S., Lin, BinLiang

and Falconer, Roger Alexander

2010. 3D Layer-integrated modelling of flow and sediment transport through a river regulated reservoir. Presented at: Proceedings of 5th International Conference on Fluvial Hydraulics, Braunschweig, Germany, , vol.2 pp. 1573-1570.

Falconer, Roger Alexander

, Xia, J. and Lin, BinLiang

2010. Severn Barrage and other tidal energy options: Environmental hydraulics studies. Presented at: Proceedings of the 6th International Symposium on Environmental Hydraulics, Athens, Greece, , vol.1 CRC Press, pp. 13-26.

Falconer, Roger Alexander

, Xia, J. and Lin, BinLiang

2010. The Severn Barrage: Modelling Comparisons for Power Generation and Hydrodynamic Impact (keynote lecture). Presented at: Proceedings of 2nd International Conference on Coastal Zone Engineering and Management (Arabian Coast), Muscat, Oman, Sultan Qaboos University Press, pp. 41-50.

Farhat, F. A., Nicolaides, D., Kanellopoulos, A. and Karihaloo, Bhushan Lal

2010. Behavior of RC beams retrofitted with CARDIFRC after thermal cycling. ASCE Journal of Materials in Civil Engineering 22 (1) , pp. 21-28. 10.1061/(ASCE)MT.1943-5533.0000008

Featherston, Carol Ann

, Pullin, Rhys

and Cole, Matthew 2010. Development of a methodology to assess mechanical impulse effects resulting from lightning attachment to lightweight aircraft structure. Presented at: 7th BSSM International Conference on Advances in Experimental Mechanics, Liverpool, UK, 7 - 9 September.

Featherston, Carol Ann

, Pullin, Rhys

and Cole, Matthew 2010. Development of a Methodology to Assess Mechanical Impulse Effects Resulting from Lightning Attachment to Lightweight Aircraft Structures. Applied Mechanics and Materials 24-25 , pp. 129-134. 10.4028/www.scientific.net/AMM.24-25.129

Featherston, Carol Ann

, Mortimer, J., Eaton, Mark Jonathan

, Burguete, R. and R., Johns 2010. The Dynamic Buckling of Stiffened panels - A Study using High Speed Digital Image Correlation. Applied Mechanics and Materials 24 - 2 (Advanc) , pp. 331-336. 10.4028/www.scientific.net/AMM.24-25.331

Fei, M. R., Zhao, Wanqing

, Yang, T. C. and Yang, S. 2010. A new experimental set-up for control study. Transactions of the Institute of Measurement and Control 32 (3) , pp. 319-330. 10.1177/0142331209345174

Ferri, C., Faraway, J. and Brousseau, Emmanuel Bruno Jean Paul

2010. Calibration of a white light interferometer for the measurement of micro-scale dimensions. International Journal of Advanced Manufacturing Technology 47 (1-4) , pp. 125-135. 10.1007/s00170-009-2050-7

FitzPatrick, D. M., Williams, T., Lees, Jonathan

, Cripps, Stephen Charles

and Tasker, Paul

2010. Exploitation of active load-pull and DLUT models in MMIC design. Presented at: IEEE Radio Frequency Integrated Circuits Symposium, Anaheim, CA, USA, 23-25 May 2010. Proceedings of the 2010 IEEE Radio Frequency Integrated Circuits Symposium May 23-25, 2010, Anaheim, California, USA. Piscataway, NJ: IEEE, pp. 487-490. 10.1109/RFIC.2010.5477406

Foster, J. A., McWhirter, John

, Davies, M. R. and Chambers, J. A. 2010. An algorithm for calculating the QR and singular value decompositions of polynomial matrices. IEEE Transactions on Signal Processing 58 (3) , pp. 1263-1274. 10.1109/TSP.2009.2034325

Foster, J. A., McWhirter, John

, Davies, M. R. and Chambers, J. A. 2010. A study of the effects of uncertainties when calculating the singular value decomposition of a polynomial matrix. Presented at: IEEE International Conference on Acoustics, Speech, and Signal Processing, Dallas, Texas, USA, 14-19 March 2010. Acoustics Speech and Signal Processing (ICASSP), 2010 IEEE International Conference (Dallas, USA). Piscataway, NJ: IEEE, pp. 4118-4121. 10.1109/ICASSP.2010.5495728

Foster, J., McWhirter, John

, Davies, M., Lambotharan, S. and Chambers, J. A. 2010. Spatial-temporal mode transmission based upon the QR decomposition of a polynomial channel matrix with uncertainties. Presented at: Proceedings 18th European Signal Processing Conference (EUSIPCO-2010), Aalborg, Denmark,

G

Gallichan, Daniel

, Andersson, Jesper L. R., Jenkinson, Mark, Robson, Matthew D. and Miller, Karla L. 2010. Reducing distortions in diffusion-weighted echo planar imaging with a dual-echo blip-reversed sequence. Magnetic Resonance in Medicine 64 (2) , pp. 382-390. 10.1002/mrm.22318

Gallichan, Daniel

, Scholz, Jan, Bartsch, Andreas, Behrens, Timothy E., Robson, Matthew D. and Miller, Karla L. 2010. Addressing a systematic vibration artifact in diffusion-weighted MRI. Human Brain Mapping 31 (2) , pp. 193-202. 10.1002/hbm.20856

Gangopadhayay, S., Bhaduri, Debajyoti

, Chattopadhyay, A.K. and Paul, S. 2010. On characterization and performance evaluation of TiN-MoSx composite coated drill in dry machining of AISI 1030 steel. Presented at: 3rd international and 24th AIMTDR Conference on Global Trends and Challenges in Design and Manufacturing, Visakhapatnam, India, Proceedings of the 3rd international and 24th AIMTDR Conference on Global Trends and Challenges in Design and Manufacturing. pp. 1125-1130.

Garcia Rocha, Victoria

, Blanco, C., Santamaría, R., Diestre, E.I., Menéndez, R. and Granda, M. 2010. The effect of the substrate on pitch wetting behaviour. Fuel Processing Technology 91 (11) , pp. 1373-1377. 10.1016/j.fuproc.2010.05.007

Garcia Rocha, Victoria

, Menéndez, R., Santamaría, R., Blanco, C. and Granda, M. 2010. Oxidation behaviour of magnesia-carbon materials prepared with petroleum pitch as binder. Journal of Analytical and Applied Pyrolysis 88 (2) , pp. 207-212. 10.1016/j.jaap.2010.04.008

Gei, Massimiliano

2010. Wave propagation in quasiperiodic structures: stop/pass band distribution and prestress effects. International Journal of Solids and Structures 47 (22-23) , pp. 3067-3075. 10.1016/j.ijsolstr.2010.07.008

Gei, Massimiliano

, Bertoldi, Katia, deBotton, G. and Lewinstein, A. 2010. Microscopic and macroscopic instabilities in dielectric composite actuators. Presented at: Actuator 10: International Conference and Exhibition on New Actuators and Drive Systems, Bremen, Germany, 14-16 June 2010. Actuator 10: International Conference and Exhibition on New Actuators and Drive Systems. Proceedings of Actuator 10: International Conference and Exhibition on New Actuators and Drive Systems. pp. 838-841.

Gerber, A., Ekanayake, Janaka Bandara

, Brousseau, Emmanuel Bruno Jean Paul

2010. Statistics of wind farm power output: methods and applications. Proceedings of the Institution of Civil Engineers - Energy 163 (4) , pp. 183-193. 10.1680/ener.2010.163.4.183

Ghaderi, Foad 2010. Signal processing techniques for extracting signals with periodic structure : applications to biomedical signals. PhD Thesis, Cardiff University.

Ghaderi, F., Nazarpour, K., McWhirter, John

and Sanei., S. 2010. Removal of ballistocardiogram artifacts using the cyclostationary source extraction method. IEEE Transactions on Biomedical Engineering 57 (11) , pp. 2667-2676. 10.1109/TBME.2010.2060334

Ghaderi, F., Sanei, S. and J., McWhirter

2010. Blind source extraction of cyclostationary sources with common cyclic frequencies. Presented at: Proceedings of IEEE International Conference on Acoustics, Speech and Signal Processing, ICASSP, Dallas, USA,

Ghaderi, F., Sanei, S. and J., McWhirter

2010. Removal of Ballistocardiogram Artifacts Exploiting Second Order Cyclostationarity. Presented at: Proceedings of IEEE International Workshop on machine learning for signal processing (MLSP), Kittilä, Finland,

Ghaderi, F., Sanei, S. and McWhirter, John

2010. Removal of ballistocardiogram artifacts using the cyclostationary source extraction method. Presented at: Proceedings IEEE International Workshop on Machine Learning for Signal Processing (MLSP), Kittilä, Finland,

Ghaderi, Foad, Nazarpour, Kianoush, McWhirter, John

and Sanei, Saeid 2010. Removal of ballistocardiogram artifacts exploiting second order cyclostationarity. Presented at: 20th IEEE International Workshop on Machine Learning for Signal Processing, Kittilä, Finland, 29 August-1 September 2010. Published in: Kaski, S., Miller, D. J., Oja, E. and Honkela, A. eds. Proceedings of the 2010 IEEE International Workshop on Machine Learning for Signal Processing (MLSP 2010). Los Alamitos, CA: IEEE, pp. 71-76. 10.1109/MLSP.2010.5589220

Ghanbari, A., Karihaloo, Bhushan Lal

and Kulasegaram, Sivakumar

2010. Prediction of the plastic viscosity of self-compacting steel fibre reinforced concrete. Presented at: Proceedings CONMOD2010, Lausanne, Switzerland, pp. 61-64.

Ghandi, E., Rafezy, B. and Howson, William Paul 2010. Coupled flexural-torsional exact dynamic stiffness matrix for an azially loaded thin-walled beam of doubly asymmetric cross section filled with shear sensitive material. Presented at: Proceedings of the International Conference of the Engineering Mechanics Institute, Los Angeles, USA,

Gharibi, Borzo 2010. Adenosine receptor expression and function during mesenchymal stem cell differentiation and osteoblast transdifferentiation. PhD Thesis, Cardiff University.

Gonzalez-Santamaria, Raul, Zou, Qingping, Pan, Shunqi

and Padilla-Hernandez, Roberto 2010. Modelling wave-tide interactions at a wave farm. Proceedings of the International Conference on Coastal Engineering 32 , waves.34.

Griffiths, Anthony John, Williams, Keith Philip and Owen, N. 2010. Engineering value recovery from municipal solid waste. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 224 (3) , pp. 559-570. 10.1243/09544062JMES1857

Griffiths, Christian Andrew, Bigot, Samuel

, Worgull, M., Heckele, M., Nestler, J. and Auerswald, J. 2010. Investigation of polymer inserts as prototyping tooling for micro injection moulding. The International Journal of Advanced Manufacturing Technology 47 (1-4) , pp. 111-123. 10.1007/s00170-009-2038-3

Griffiths, Christian Andrew, Dimov, Stefan Simeonov, Brousseau, Emmanuel Bruno Jean Paul

, Chouquet, C., Gavillet, J. and Bigot, Samuel

2010. Investigation of surface treatment effects in micro-injection-moulding. International Journal of Advanced Manufacturing Technology 47 (1-4) , pp. 99-110. 10.1007/s00170-009-2000-4

Griffiths, Huw, Jones, P., Harid, Noureddine

and Haddad, Abderrahmane

2010. Proposal for measurement of earth impedance using variable frequency injection. IOP Measurement Science and Technology 21 (8) , 085102. 10.1088/0957-0233/21/8/085102

Griffiths, Jeffrey Deacon, Jones, Michael David

, Read, Martyn Sinclair and Williams, Janet Elizabeth 2010. A simulation model of bed-occupancy in a critical care unit. Journal of Simulation 4 (1) , pp. 52-59. 10.1057/jos.2009.22

Groves, R. B., Evans, Samuel Lewin

, Coulman, S. and BircHall, Jeremy Peter 2010. Mechanics of skin penetration by microneedles. Presented at: Proceedings of the 8th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Guagliano, Mario, Crivelli, Davide

, Marangoni, Daniele and Monici, Alberto 2010. Analisi del danneggiamento a fatica di un materiale composito pultruso con la tecnica dell'emissione acustica. Presented at: XXXIX Convegno Nazionale AIAS, Maratea, Italy, 7-9 September 2010. AIAS 2010 Atti del XXXIX Convegno Nazionale. AIAS - Assciazione Italiana Analisi delle Sollecitazioni,

Guo, Dongsheng, Lathi, Deepak, Harid, Noureddine

, Griffiths, Huw, Haddad, Abderrahmane

and Ainsley, A. 2010. Experimental investigation into the performance of large-scale earthing electrodes. Presented at: 2010 International Conference on High Voltage Engineering and Application (ICHVE), New Orleans, LA, USA, 11-14 October 2010. Proceedings of the 2010 International Conference on High Voltage Engineering and Application (ICHVE). Los Alamitos, CA: IEEE, pp. 465-468. 10.1109/ICHVE.2010.5640727

H

Haddad, Abderrahmane

, Griffiths, Huw, Ahmeda, Mohammad and Harid, Noureddine

2010. Experimental investigation of the impulse characteristics of practical ground electrode systems. Presented at: 2010 International Conference on High Voltage Engineering and Application (ICHVE), New Orleans, LA, USA, 11-14 October 2010. Proceedings of the 2010 International Conference on High Voltage Engineering and Application (ICHVE). Piscataway, NJ: IEEE, pp. 469-472. 10.1109/ICHVE.2010.5640724

Haddad, Abderrahmane

, Waters, Ronald T., Griffiths, Huw, Chrzan, Krystian, Harid, Noureddine

, Sarkar, Partha and Charalampidis, Panagiotis 2010. A new approach to anti-fog design for polymeric insulators. IEEE Transactions on Dielectrics and Electrical Insulation (TDEI) 17 (2) , pp. 343-350. 10.1109/TDEI.2010.5448087

Hadimani, R. L., Bartlett, P. A., Melikhov, Y., Snyder, John Evan and Jiles, David 2010. Field and temperature induced colossal strain in Gd5(SixGe1−x)4. Journal of Magnetism and Magnetic Materials 323 (5) , pp. 532-534. 10.1016/j.jmmm.2010.10.004

Hamid, H. A., Harid, Noureddine

and Haddad, Abderrahmane

2010. Transient analysis during switching of mechanically switched capacitor and damping network (MSCDN). Presented at: 45th International Universities Power Engineering Conference, Cardiff, UK, 31 August - 3 September 2010. 2010 45th International Universities Power Engineering Conference (UPEC 2010). London: Institute of Electrical and Electronics Engineers (IEEE), pp. 478-481.

Hashim, Shaiful Jahari 2010. Wideband active envelope load-pull for robust power amplifier and transistor characterisation. PhD Thesis, Cardiff University.

Hashim, Shaiful, Hashmi, Mohammad Shabi, Benedikt, Johannes

2010. Effect of impedance variation around the fundamentals on PA distortions characteristics under wideband multi-tone stimulus. Presented at: IEEE Asia Pacific Conference on Circuits and Systems, Kuala Lumpur, Malaysia, 6-9 December 2010. Published in: Rohani, F. Z., Ahmad, S. A., Che Soh, A., Jaafar, H., Zaini, M. H. M., Sidek, M. H. M. and Shaufiq, M. eds. Proceedings of the 2010 Asia Pacific Conference on Circuit and System, 6th – 9th December 2010, Kuala Lumpur, Malaysia. Los Alamitos, CA: IEEE, pp. 1115-1118. 10.1109/APCCAS.2010.5775081

Hashmi, M. S., Benedikt, Johannes

and Tasker, Paul

2010. Impact of group delay on the load emulation in multi-tone active envelope load-pull system. Australian Journal of Electrical and Electronics Engineering 7 (1) , pp. 83-88.

Hashmi, Mohammad Shabi, Clarke, Alan Leslie, Lees, Jonathan

, Helaoui, M., Tasker, Paul J.

and Ghannouchi, F. M. 2010. Agile harmonic envelope load-pull system enabling reliable and rapid device characterization. Measurement Science and Technology 21 (5) , 055109. 10.1088/0957-0233/21/5/055109

Hashmi, Mohammad Shabi, Clarke, Alan Leslie, Woodington, Simon Philip, Lees, Jonathan

2010. An accurate calibrate-able multiharmonic active load-pull system based on the envelope load-pull concept. IEEE Transactions on Microwave Theory and Techniques 58 (3) , pp. 656-664. 10.1109/TMTT.2010.2040403

Hassan, M. R. A., Azid, I. A., Ramasamy, M., Kadesan, J., Seetharamu, K. N., Kwan, Alan Shu Khen

and Arunasalam, P. 2010. Mass optimization of four bar linkage using genetic algorithms with dual bending and buckling constraints. Structural Engineering and Mechanics 35 (1) , pp. 83-98.

Havell, B., Hicks, Yulia Alexandrovna

, Marshall, D., Rosin, P. and S., Sanei 2010. Comparison of techniques for Audio Driven Facial Animation. Presented at: Proceedings of ACM/SSP Net Symposium on Facial Analysis and Animation, Edinburgh, UK,

He, Yan, Jenkins, Nicholas

and Eltayeb, Mohamed 2010. ICT infrastructure for smart distribution networks. Presented at: 14th IEEE International Symposium on Power Line Communications and Its Applications, Rio de Janeiro, Brazil, 28-30 March 2010. Proceedings of the 2010 IEEE International Symposium on Power Line Communications and Its Applications (ISPLC), Rio de Janeiro, Brazil, 28-31 March 2010. Los Alamitos, CA: IEEE, pp. 319-324. 10.1109/ISPLC.2010.5479911

Hensman, J., Mills, R., Pierce, S. G., Worden, K. and Eaton, Mark Jonathan

2010. Locating acoustic emission sources in complex structures using Gaussian processes. Mechanical Systems and Signal Processing 24 (1) , pp. 211-223. 10.1016/j.ymssp.2009.05.018

Hong, S. H., Kim, S. J., Sturm, T., Stoesser, Thorsten

and Gonzalez, J. 2010. Effect of low tailwater during drought on scour conditions downstream of an ogee spillway. Presented at: Riverflow 2010: 5th International Conference on Fluvial Hydraulics, Braunschweig, Germany, 8-10 September 2010.

Howson, William Paul and Watson, A. 2010. Theory and compact program for the Sturm-Liouville problem on homogeneous trees. Presented at: Proceedings of the 10th International Conference on Computational Structures Technology (CST2010), Valencia, Spain,

Hussin, Mohd Fahmi

and Harid, Noureddine

2010. Monitoring of high voltage distribution line. Presented at: Third UHVnet Colloquium on Technologies for Future High Voltage Infrastructure, Manchester, UK, 19-20 January 2010.

Hussin, Mohd Fahmi

and Harid, Noureddine

2010. Voltage transducer for monitoring of high voltage overhead lines. Presented at: 45th International Universities Power Engineering Conference, Cardiff, UK, 31 August - 3 September 2010. 45th International Universities Power Engineering Conference (UPEC 2010). London: Institute of Electrical and Electronics Engineers (IEEE), pp. 348-353.

Hwang, Chi-Jeon, Lok, L.B., Chong, Harold M H, Holland, Martin, Thayne, Iain G and Elgaid, Khaled

2010. An ultra-low-power MMIC amplifier using 50-nm $\delta$ -doped $\hbox{In}_{0.52}\hbox{Al}_{0.48}\hbox{As/In}_{0.53} \hbox{Ga}_{0.47}\hbox{As}$ metamorphic HEMT. IEEE Electron Device Letters 31 (11) , pp. 1230-1232. 10.1109/LED.2010.2070484

Hwang, Chi-Jeon, Lok, Lai Bun, Thayne, Iain G. and Elgaid, Khaled

2010. W-band microstrip band-pass filter using branch-line coupler with open stubs. Microwave and Optical Technology Letters 52 (6) , pp. 1436-1439. 10.1002/mop.25185

I

Ishak, A., Bray, Michaela

and Han, D. 2010. Downscaling cumulative rainfall for comparison by four cumulus parameterization schemes in the Brue Catchment. Presented at: Role of Hydrology in Managing Consequences of a Changing Global Environment, Newcastle upon Tyne, 19-23 July 2010. Published in: Kirby, Celia ed. Role of hydrology in managing consequences of a changing global environment : BHS Third International Symposium, 19-23 July 2010, Newcastle University, Newcastle upon Tyne. London: British Hydrology Society,

Ishak, Ahmad, Bray, Michaela

and Han, Dong 2010. Assessment of meteorological variables from MM5 for reference evapotranspiration estimation. Presented at: HIC 2010 - The 9th International Conference on Hydroinformatics, Tianjin, China, 7 September 2010.

Ishak, Asnor Muizan, Bray, Michaela

, Remesan, Renji and Han, Dawei 2010. Estimating reference evapotranspiration using numerical weather modelling. Hydrological Processes 24 (24) , pp. 3490-3509. 10.1002/hyp.7770

J

Jaafar, Izan, Griffiths, Anthony John, Hopkins, A., Hutton-Ashkenny, M., Steer, Julian Mark

, Griffiths, Martyn Hywel and Sapsford, Devin James

2010. Chloride roasting for the removal of zinc from steelmaking dusts. Presented at: Processing of Zinc Ores and Concentrates: 2nd International Symposium (Zinc Processing '10), Cape Town, South Africa, 10-13 November 2010.

Jaafar, Izan, Griffiths, Anthony John, Williams, Keith Philip, Hopkins, A., Hutton-Ashkenny, M., Steer, Julian Mark

, Griffiths, Martyn Hywel and Sapsford, Devin James

2010. Chloride roasting for the recovery of zinc from steelmaking dusts. Presented at: 2nd International Symposium on the Processing of Zinc Ores and Concentrates 2010 (Zinc Processing '10), Cape Town, South Africa, 13 November 2010. Proceedings of the 2nd International Symposium on the Processing of Zinc Ores and Concentrates 2010. Red Hook, NY: Curran Associates, pp. 47-63.

Jamal, Mohamad Hidayat, Simmonds, David J., Magar, Vanesa and Pan, Shunqi

2010. Modelling infiltration on gravel beaches with an Xbeach variant. Proceedings of the International Conference on Coastal Engineering 32 , sediment.41.

Jefferson, Anthony Duncan

2010. Finite element material models for concrete. Presented at: Proceedings of the 10th International Conference on Computational Structures Technology (CST2010), Valencia, Spain,

Jefferson, Anthony Duncan

and Bennett, T. 2010. A model for cementitious composite materials based on micro-mechanical solutions and damage-contact theory. Computers & Structures 88 (23-24) , pp. 1361-1366. 10.1016/j.compstruc.2008.09.006

Jefferson, Anthony Duncan

, Joseph, C., Lark, Robert John

, Isaacs, B., Dunn, S. C. and Weager, B. 2010. A new system for crack closure in cementitious materials using shrinkable polymers. Cement and Concrete Research 40 (5) , pp. 795-801. 10.1016/j.cemconres.2010.01.004

Jefferson, Anthony Duncan

and Lyons, P. F. 2010. Comparison of approaches from simulating moisture content changes in concrete. Presented at: Proceedings of Euro-C 2010 Computational modelling of concrete structures, Rohrmoos, Austria,

Jeong, Y., Choi, Heungjae

and Kim, C. D. 2010. Experimental verification for time advancement of negative group delay in RF electronic circuits. Electronics letters 46 (4) , pp. 306-307. 10.1049/el.2010.3147

Jiles, David, Hadimani, R., Melikhov, Yevgen

and Snyder, John Evan 2010. Magnetocrystalline anisotropy in single crystal Gd5Si2.7Gel.3. Presented at: American Physical Society (APS) March Meeting 2010, Portland, OR, USA, 15-19 March 2010.

Jiles, David, Mierczak, Lukasz and Melikhov, Yevgen

2010. Detection of surface condition in ground steel components using magnetic Barkhausen measurements. Presented at: 15th International Workshop on Electromagnetic Nondestructive Evaluation, Szczecin, Poland, 13-16 June 2010.

Jimenez-Alcazar, Rony, Quijada-Escamilla, Farid, Valera Medina, Agustin

, Aboites-Davila, Fernando, Rico-Espino, Jose Guadalupe, Rosello-Perez, Manuel and Feregrino-Vega, Patricia 2010. Cause analysis of the Fire caught in the Thermal Isolation Zone of a Steam Turbine, Case Study [Analisis de causas del incendio en la zona de aislamiento termico de una turbina de vapor, caso de estudi]. Presented at: SOMIM XVI, Nuevo Leon, Mexico, 22-24 September 2010. Memorias del XVI Congreso Internacional Anual de la SOMIM. Sociedad Mexicana de Ingenieria Mecanica,

Joarder, Md Ashikur Rahman, Price, Andrew and Mourshed, Monjur

2010. Access to daylight and outdoor views: A comparative study for therapeutic daylighting design. World Health Design 3 (1) , pp. 62-69.

Johnson Lim, Soon Chong, Liu, Ying

and Lee, Wing Bun 2010. Multi-facet product information search and retrieval using semantically annotated product family ontology. Information Processing & Management 46 (4) , pp. 479-493. 10.1016/j.ipm.2009.09.001

Jones, J. A., Allanson-Bailey, L., Jones, M. D. and Holt, Catherine Avril

2010. An ergometer based study of the role of the upper limbs in the female rowing stroke. Presented at: 8th Conference of the International Sports Engineering Association (ISEA), Vienna, Austria, Published in: Sabo, A., Kafka, P., Litzenberger, S. and Sabo, C. eds. The Engineering of Sport 8 - Engineering Emotion. Procedia Engineering (2/2) Amsterdam: Elsevier, pp. 2555-2561. 10.1016/j.proeng.2010.04.031

Joseph, C., Gardner, Diane Ruth

, Jefferson, Anthony Duncan

, Isaacs, B. and Lark, Robert John

2010. Self healing cementitious materials: A review of recent work. Proceedings of the Institution of Civil Engineers Construction Materials 164 (1) , pp. 29-41. 10.1680/coma.900051

Joseph, C., Jefferson, Anthony Duncan

, Isaacs, B., Lark, Robert John

and Gardner, Diane Ruth

2010. Experimental investigation of adhesive-based self-healing of cementitious materials. Magazine of Concrete Research 62 (11) , pp. 831-843. 10.1680/macr.2010.62.11.831

K

Kamarudin, Muhammad, Albano, Maurizio

, Harid, Noureddine

and Coventry, P. 2010. A survey on the potential of CF31 gas as an alternative for SF6 in high voltage applications. Presented at: 45th International Universities Power Engineering Conference, Cardiff, UK, 31 August - 3 September 2010. 2010 45th International Universities Power Engineering Conference (UPEC 2010). London: Institute of Electrical and Electronics Engineers (IEEE), pp. 159-163.

Karihaloo, Bhushan Lal

2010. Simple mechanics models can explain complex phenomena even at the nano scale. Presented at: IUTAM International Union of Theoretical and Applied Mechanics Symposium on Surface Effects in the Mechanics of Nanomaterials and Heterostructures, Beijing, China,

Karihaloo, Bhushan Lal

, Kulasegaram, Sivakumar

and Ghanbari, A. 2010. Modelling the flow of self-compacting concrete. Presented at: Proceedings of the 4th European Congress on Computational Mechanics (ECCM2010)CDROM, Paris, France, (59)

Karihaloo, Bhushan Lal

and Xiao, Q. Z. 2010. Accurate simulation of mixed-mode cohesive crack propagation in plain and fibre-reinforced concrete using XFEM. Presented at: Proceedings of the 18th European Conference on Fracture Fracture of Materials and Structures from Micro to Macro Scale,, Dresden, Germany,

Karihaloo, Bhushan Lal

and Xiao, Q. Z. 2010. Accurate simulation of mixed-mode cohesive crack propagation in plain and fibre-reinforced concrete using XFEM. Presented at: 18th European Conference on Fracture, Dresden, Germany, 30 August-3 September 2010. Published in: Mechtcherin, V. and Kaliske, M. eds. Fracture and damage of advanced fibre-reinforced cement-based materials: proceedings of a Symposium on Fracture and Damage of Advanced Fibre-reinforced Cement-based Materials organized within the European Conference on Fracture, ECF 18, 30th August - 3rd. Freiburg: Aedificatio Publishers, pp. 129-146.

Karihaloo, Bhushan Lal

and Xiao, Q. Z. 2010. Asymptotic fields ahead of mixed mode frictional cohesive cracks. Zeitschrift fur Angewandte Mathematik und Mechanik (ZAMM) 90 (9) , pp. 710-720. 10.1002/zamm.200900386

Kay, Peter John, Bowen, Philip John

and Witlox, H. W. M. 2010. Sub-cooled and flashing liquid jets and droplet dispersion, II. Scaled Experiments and derivation of droplet atomisation correlations. Journal of Loss Prevention in the Process Industries 23 (6) , pp. 849-856. 10.1016/j.jlp.2010.07.006

Kennedy, D.

and Featherston, C. A.

2010. Exact strip analysis and optimum design of aerospace structures. Aeronautical Journal 114 (1158) , pp. 505-512. 10.1017/S0001924000003997

Kennedy, David

, Park, Brett and Unsworth, M. D. 2010. Towards global layup optimization of composite panels with initial buckling constraints. Presented at: 8th ASMO UK Conference on Engineering Design Optimization, London, 8-9 July 2010. Published in: Duddeck, F., Querin, O. M., Sienz, J., Toropov, V. V. and Shaheed, M. H. eds. Proceedings of the 8th ASMO UK / ISSMO conference on Engineering Design Optimization. University of Leeds: ASMO-UK, pp. 221-231.

Kerfriden, Pierre

, Adhikari, S. and Bordas, Stephane Pierre Alain

2010. Bridging model order reduction and domain decomposition: some new developments. Presented at: 9th World Congress on Computational Mechanics (WCCM/APCOM 2010), Sydney Australia,

Kerfriden, Pierre

, Allix, O. and Gosselet, P. 2010. Importance and control of the time discretization for delamination prediction. Presented at: 4th European Congress on Computational Mechanics (ECCM IV): Solids, Structures and Coupled Problems in Engineering, Paris, France,

Kerfriden, Pierre

, Gosselet, P., Adhikari, S., Bordas, Stephane Pierre Alain

and Passieux, J. C. 2010. POD-based model order reduction for the simulation of strong nonlinear evolutions in structures: Application to damage propagation. IOP Conference Series: Materials Science and Engineering 10 (1) , 012165. 10.1088/1757-899X/10/1/012165

Khurana, A., Byrne, Carlton Barrie Baylis, Evans, Samuel Lewin

, Tanaka, H. and Haraharan, K. 2010. Comparison of transverse wires and half pins in Taylor Spatial Frame: A biomechanical study. Journal of Orthopaedic Surgery and Research 5 (1) , 23. 10.1186/1749-799X-5-23

Kim, Dongjin, Kim, Doo-Il, Kim, Jae-Hong and Stoesser, Thorsten

2010. Large Eddy Simulation of flow and tracer transport in multichamber ozone contactors. Journal of Environmental Engineering 136 (1) , pp. 22-31. 10.1061/(ASCE)EE.1943-7870.0000118

Kim, S. J. and Stoesser, Thorsten

2010. The effect of drag coefficient on 3D numerical modeling of open-channel flow with emergent vegetation. Presented at: 8th International Symposium on Ecohydraulics, Seoul, South Korea, 12-16 September 2010.

King, R. and Ekanayake, Janaka Bandara

2010. Harmonic modelling of offshore wind farms. Presented at: IEEE PES General Meeting : Power Systems Engineering in Challenging Times, Minneapolis, USA, 10.1109/PES.2010.5589657

Koc, Ebubekir 2010. Bees Algorithm: Theory, improvements and applications. PhD Thesis, Cardiff University.

Konstantinov, D., Marsh, Richard

, Bowen, Philip John

and Crayford, Andrew Philip

2010. Effervescent Atomisation for Industrial Energy - Technology Review. Journal of Atomisation and Sprays 20 (6) , pp. 525-552. 10.1615/AtomizSpr.v20.i6

Krivoruchko, V., Marchenko, M. and Melikhov, Yevgen

2010. Griffiths phase, metal-insulator transition, and magnetoresistance of doped manganites. Physical Review B: Condensed Matter and Materials Physics 82 (6) , 064419. 10.1103/PhysRevB.82.064419

Kulasegaram, Sivakumar

and Chen, Yang 2010. Modelling particulate composite using SPH Method. Presented at: 4th European Conference on Computational Mechanics (ECCM 2010), Paris, France, 16-21 May 2010.

Kulesegaram, S., Karihaloo, Bhushan Lal

and Ghanbari, A. 2010. Modelling the flow of self-compacting concrete. Presented at: Proceedings 5th SPHERIC Smoothed Particle Hydrodynamics European Research Interest Community workshop, Manchester, UK, pp. 69-75.

Kumar, J. L. G., Zhao, Y. Q., Zhao, X. H. and Babatunde, Akintunde 2010. Organics removal in tidal flow constructed wetland treating high strength animal farm wastewater: Determination of first-order rate constant. Presented at: 3rd International Perspective on Current & Future State of Water Resources & the Environment, Chennai, India, 5-7 January 2010.

Kutrowski, T., Anderson, Philip Ian

and Moses, Anthony John 2010. A model to predict amplitude and phase errors in current transformers. Presented at: 11th Joint MMM-INTERMAG IEEE International Magnetics Conference, Washington, USA, (HD-12)

L

Lam, M. Y.

, Liu, H. W. and Ghidaoui, M. S. 2010. Investigation of temporal mixing layer in shallow water with BGK algorithm. Journal of Hydro-environment Research 4 (2) , pp. 123-129. 10.1016/j.jher.2010.04.007

Lam, Man-yue

, Liu, Hong-wei and Ghidaoui, Mohamed 2010. The sensitivity of shallow mixing layers to upstream perturbations and its implication to numerical code validation. Journal of Hydrodynamics 22 (S1) , pp. 639-645. 10.1016/S1001-6058(10)60011-X

Landham, Priyan Rajakone, Nokes, Leonard Derek Martin

, Byrne, Carlton Barrie Baylis, Dowson, D., Dent, Claire and Theobald, Peter

2010. Friction as a potential cause of paratenonitis [Abstract]. Journal of Bone and Joint Surgery 92-B (I 59)

Le, C. V., Nguyen-Xuan, H., Askes, H., Bordas, Stephane Pierre Alain

, Rabczuk, T. and Nuguyen-Vinh, H. 2010. A cell-based smooth finite element method for kinematic limit analysis. International Journal for Numerical Methods in Engineering 83 (12) , pp. 1651-1674. 10.1002/nme.2897

Lee, Ji Young 2010. Multi-objective optimisation using the Bees Algorithm. PhD Thesis, Cardiff University.

Lees, Jonathan

, Akmal, M., Bensmida, S., Benedikt, Johannes

, Morris, K., Beach, M., McGeehan, J. and Tasker, Paul

2010. Waveform engineering applied to linear-efficient PA design. Presented at: 2010 IEEE 11th Annual Wireless and Microwave Technology Conference (WAMICON 2010), Melbourne Beach, USA, 12-13 April, 2010. (546184) 10.1109/WAMICON.2010.5461847

Lewis, S., Haynes, V., Wheeler-Jones, R., Sly, J., Perks, Richard Marc

and Piccirillo, L. 2010. Surface characterization of poly(methylmethacrylate) based nanocomposite thin films containing Al2O3 and TiO2 nanoparticles. Thin Solid Films 518 (10) , pp. 2683-2687. 10.1016/j.tsf.2009.09.005

Li, H. J., Rezgui, Yacine

, Miles, John Christopher and Wilson., I. 2010. Low carbon ontology development using information retrieval techniques. Presented at: 8th European Conference on Product and Process Modelling, Cork, Ireland,

Li, Haijiang

, Rezgui, Yacine

, Miles, John Chrisopher and Wilson, I. 2010. Low carbon ontology development using information retrieval techniques. Presented at: European Conference on Product and Process Modelling 2010, Cork, Republic of IReland, 14-16 September 2010. Published in: Menzel, Karsten and Scherer, Raimar J. eds. eWork and eBusiness in architecture, engineering and construction. London: Taylor and Francis, pp. 215-221. 10.1201/b10527-37

Li, J., Evans, Samuel Lewin

, Blain, E., Piccinelli, S., Holt, Catherine Avril

, Dini, D. and Accardi, M. 2010. Experimental methods for validating articular cartilage swelling models. Presented at: British Orthopaedic Research Society Annual Meeting, Cardiff, UK, 12-13 July 2010. Proceedings of the British Orthopaedic Research Society Conference (Cardiff, UK).

Li, J., Piccinelli, S., Holt, Catherine Avril

, Blain, E., Dini, D. and Accardi, M. 2010. Numerical modeling of articular cartilage mechanical behaviour. Presented at: 9th International Conference on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Li, Y. and Cleall, Peter John

2010. Analytical Solutions for Contaminant Diffusion in Double-layered Porous Media. ASCE Journal of Geotechnical and Geoenvironmental Engineering 136 (11) , pp. 1542-1554. 10.1061/(ASCE)GT.1943-5606.0000365

Li, Yu-Chao, Chen, Yun-Min, Zhan, Tony L.T., Ling, Dao-Sheng and Cleall, Peter John

2010. An efficient approach for locating the critical slip surface in slope stability analyses using a real-coded genetic algorithm. Canadian Geotechnical Journal 47 (7) , pp. 806-820. 10.1139/T09-124

Liang, D., Wang, X., Falconer, Roger Alexander

and Bockelmann-Evans, Bettina Nicole

2010. A shock-capturing model for contaminant advection and diffusion. Presented at: 9th International Conference on Hydroinformatics, Tianjin, China, 7-11 September 2010. Proceedings of 9th International Conference on Hydroinformatics, Tianjin, China. , vol.1 Beijing: Chemical Industry Press, pp. 77-84.

Liang, D., Wang, Xiangwei, Falconer, Roger Alexander

and Bockelmann-Evans, Bettina Nicole

2010. Solving the depth-integrated solute transport equation with a TVD-MacCormack scheme. Environmental Modelling & Software 25 (12) , pp. 1619-1629. 10.1016/j.envsoft.2010.06.008

Liang, Yan, Lu, Wen Feng, Liu, Ying

and Johnson Lim, Soon Chong 2010. Interactive interface design for design rationale search and retrieval. Presented at: ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, Montreal, Quebec, Canada, 15 - 18 August 2010. ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. , vol.5 ASME, pp. 73-83. 10.1115/DETC2010-28392

Lim, Soon Chong Johnson, Loh, Han Tong and Liu, Ying

2010. User interface design for interactive product family analysis and variants derivation. Presented at: 36th Design Automation Conference, Montreal, Quebec, Canada, 15–18 August 2010. Proceedings of the ASME 2010 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. , vol.1 The American Society of Mechanical Engineers, pp. 869-878. 10.1115/DETC2010-28390

Lin, BinLiang

and Syed, M. 2010. Combining deterministic and data-driven models for predicting bathing water quality. Presented at: 9th International Conference on Hydroinformatics, Tianjin, China, 7-11 September 2010. Proceedings of 9th International Conference on Hydroinformatics, Tianjin, China. , vol.3 Chemical Industry Press, pp. 1934-1940.

Lind, Steven and Phillips, Timothy Nigel

2010. The effect of viscoelasticity on a rising gas bubble. Journal of non-Newtonian fluid mechanics 165 (15-16) , pp. 852-865. 10.1016/j.jnnfm.2010.04.002

Lind, Steven and Phillips, Timothy Nigel

2010. Spherical bubble collapse in viscoelastic fluids. Journal of non-Newtonian fluid mechanics 165 (1-2) , pp. 56-64. 10.1016/j.jnnfm.2009.09.002

Liu, Hongwei, Lam, Man Yue

and Ghidaoui, Mohamed S. 2010. A numerical study of temporal shallow mixing layers using BGK-based schemes. Computers and Mathematics with Applications 59 (7) , pp. 2393-2402. 10.1016/j.camwa.2009.08.046

Liu, Y., Chen, Y. and Kulasegaram, Sivakumar

2010. Projection method with self-adaptive time steps for LES of ignition and extinction in non-premixed jet flames. International Journal for Numerical Methods in Biomedical Engineering 26 (9) , pp. 1203-1218. 10.1002/cnm.1210

Liu, Ying

, Liang, Yan, Kwong, Chun Kit and Lee, Wing Bun 2010. A new design rationale representation model for rationale mining. Journal of Computing and Information Science in Engineering 10 (3) , 031009. 10.1115/1.3470018

Liu, Ying

, Liang, Yan and Lim, Soon Chong Johnson 2010. Designing graphical interfaces for design rationale search & retrieval. Presented at: CHI 2010, Atlanta, GA, 14 - 15 April 2010. Extended Abstracts on Human Factors in Computing Systems. pp. 4087-4092. 10.1145/1753846.1754107

Lo, Jen-Lung 2010. Progressive transmission of medical images. PhD Thesis, Cardiff University.

Lok, L.B., Hwang, C.-J., Thayne, I.G. and Elgaid, K.

2010. Demonstration of a W-band microstrip parallel coupled-line bandpass filter in GaAs technology. Presented at: IET Seminar on Passive RF and Microwave Components, Birmingham, UK, 21-21 Feb 2012. Passive RF and Microwave Components. IEEE, p. 37. 10.1049/ic.2010.0174

Long, D. B., Guo, Z. Y., Liu, X., Bordas, Stephane Pierre Alain

and Zhang, L. M. 2010. An element nodal force-based large increment method for elastoplacisity. Presented at: 2nd International Symposium on Computational Mechanics (ISCM II), in conjunction with 12th International Conference on the Enhancement and Promotion of Computational Methods In Engineering and Science (EPMESC XII), Macau, China, 30 November-3 December 2009. Published in: Lu, Jane Wei-Zhen ed. Proceedings of 2nd International Symposium on Computational Mechanics (ISCM II), in conjunction with 12th International Conference on the Enhancement and Promotion of Computational Methods In Engineering and Science (EPMESC XII) , Macau, China. AIP conference proceedings , vol.2 (1233) Melville, NY: American Institute of Physics, pp. 1401-1405.

Loukakos, Panagiotis and Setchi, Rossitza

2010. Application of ontology engineering in customs domain. Lecture Notes in Computer Science 6276 , pp. 481-490. 10.1007/978-3-642-15387-7_52

Lovern, Barry 2010. Functional analysis of the shoulder complex in healthy and pathological subjects using three-dimensional motion analysis techniques. PhD Thesis, Cardiff University.

Lovern, B., Stroud, L. A., Ferran, N .A., Evans, Samuel Lewin

, Evans, R. O. and Holt, Catherine Avril

2010. Motion analysis of the glenohumeral joint during activities of daily living. International Journal of Computer Methods in Biomechanics and Biomedical Engineering 13 (6) , pp. 803-809. 10.1080/10255841003630637

Lu, Y. T., Zhu, Hanxing X.

, Richmond, Stephen

and Middleton, John 2010. A visco-hyperelastic model for skeletal muscle tissue under high strain rates. Journal of Biomechanics 43 (13) , pp. 2629-2632. 10.1016/j.jbiomech.2010.05.030

Lu, Y. T., Zhu, Hanxing

and Richmond, S. 2010. A visco-hyperelastic constitutive model for skeletal muscle tissue. Presented at: 17th Congress of European Society of Biomechanics, Edinburgh, UK, 5-8 July 2010.

Lu, Y. T., Zhu, Hanxing

, Richmond, Stephen

and Middleton, John 2010. Modelling the fibre orientation arrangement of skeletal muscle using FEM-NURBS method. Presented at: 9th International Symposium Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain, 24-27 February 2010. Published in: Middleton, John ed. Proceedings of the 9th Intl Symposium of Computer Methods in Biomechanics and Biomedical Engineering (CMBBE2010) Valencia, Spain 24 – 27 Feb 2010. Solihull: Arup,

M

Ma, F., Jiang, C., Rauen, William Bonino and Lin, BinLiang

2010. Modelling sediment transport processes in a macro-tidal estuary. Science in China: Series E: Technological Sciences 52 (11) , pp. 3368-3375. 10.1007/s11431-009-0351-6

Madete, J. K., Fuller, A., Klein, A., Trueman, R., Dunnett, Stephen Bruce

, Rosser, Anne Elizabeth

2010. Postural adjustments of an animal model of Parkinson's disease during over-ground locomotion. Presented at: 9th International Conference on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Madete, J., Fuller, A., Klein, A., Trueman, R., Dunnett, Stephen Bruce

, Rosser, Anne Elizabeth

2010. Quantification of rat locomotion along beams of varying widths. Presented at: 9th International Conference on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Madete, June Kazira, Klein, Alexander, Fuller, A., Trueman, Rebecca, Rosser, Anne Elizabeth

, Dunnett, Stephen Bruce

2010. Challenges facing quantification of rat locomotion along beams of varying widths. Proceedings of the Institution of Mechanical Engineers Part H-Journal of Engineering in Medicine 224 (11) , pp. 1257-1265. 10.1243/09544119JEIM779

Mahdi, Talib

, Francis, R. W., Thomas, H. R. and Zheng, G. 2010. Remediation options for contaminated canal sediments. Presented at: 6th International Congress on Environmental Geotechnics, Delhi, India, 8-12 November 2010.

Mahmud, J., Holt, Catherine Avril

and Evans, Samuel Lewin

2010. An innovative application of a small-scale motion analysis technique to quantify human skin deformation in vivo. Journal of Biomechanics 43 (5) , pp. 1002-1006. 10.1016/jbiomech.2009.11.009

Mahmud, J., Holt, Catherine Avril

and Evans, Samuel Lewin

2010. Measuring skin strain distribution in vivo using motion capture and finite elements. Presented at: 9th International Conference on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Malki, R. and Wilson, Catherine

2010. A Comparison between the Turbulence Structure within a Vegetation Canopy and a Uniform Cylinder Model with Increasing Reynolds Number. Presented at: Proceedings of the International Symposium on Eco-Hydraulics, Seoul, Korea,

Mani, M., Roberts, M., Curtis, E., Goodwin, N., Zatman, T., Wilkes, Antony Robert and Holt, Catherine Avril

2010. Motion analysis - a new technology in airway assessment. Anaesthesia 65 (1) , pp. 98-99. 10.1111/j.1365-2044.2009.06184_6.x

Manzoor, Umar, Nefti, Samia and Rezgui, Yacine

2010. Autonomous malicious activity inspector - AMAI. Presented at: NLDB 2010: International Conference on Application of Natural Language to Information Systems, Cardiff, UK, 23-25 June 2010. Natural Language Processing and Information Systems. Lecture Notes in Computer Science. Lecture Notes in Computer Science (6177) Berlin: Springer Verlag, pp. 204-215. 10.1007/978-3-642-13881-2_21

Marketos, P., Moses, Anthony and Hall, J. 2010. Effect of DC offset voltage on AC magnetisation of transformer core steel. Journal of Electrical Engineering 61 (7S) , pp. 123-125.

Marketos, Philip, Moses, Anthony John and Hall, Jeremy Peter

2010. Effect of DC voltage on AC magnetisation of transformer core steel. Journal of Electrical Engineering 61 (7/s) , pp. 123-125.

Marketos, Philip, Moses, Anthony John and Hall, Jeremy Peter

2010. Effect of DC voltage on AC magnetization of transformer core steel. Presented at: Magnetic Measurements 2010, Prague, Czechoslavakia, 12-15 September 2010. Magnetic Measurements 2010: Book of Abstracts. Prague: Czech Technical University in Prague, pp. 57-58.

Marks, A. and Rezgui, Yacine

2010. IT leadership in Higher Education: The CIO candidate. IEEE IT Professional 13 (3) , pp. 52-56. 10.1109/MITP.2010.102

Marks, A. and Rezgui, Yacine

2010. Security Awareness in Virtual Communities: The Case of Non-collocated Academic Research Collaborations. Presented at: Proceedings of the 11th IFIP Working Conference on Virtual Enterprises, Saint-Etienne, France,

Martin, J. C., Akande, K. and Falconer, Roger Alexander

2010. Innovations from the Halcrow-Cardiff University strategic collaboration. Engineering, Construction and Architectural Management 17 (1) , pp. 46-64. 10.1108/09699981011011311

Martin, Philip Stephen, Theobald, Peter

, Kemp, Alison Mary

and Jones, Michael David

2010. Development of a 9 month old model for the computational simulation of traumatic injuries to infants. Presented at: 17th Congress of the European Society of Biomechanics (ESB2010), Edinburgh, UK, 5-8 July 2010.

Mashad Nemati, Hossein, Clarke, Alan Leslie, Cripps, Stephen Charles

, Fager, Christian, Grahn, Jan and Zirath, Herbert 2010. Evaluation of a GaN HEMT transistor for load- and supply-modulation applications using intrinsic waveform measurements. Presented at: IEEE MTT 2010 International Microwave Symposium, Anaheim, CA, USA, 23-28 May 2010. 2010 IEEE MTT-S International Microwave Symposium Digest (MTT 2010). Piscataway, NJ: IEEE, pp. 509-512. 10.1109/MWSYM.2010.5517696

Masoero, E., Wittel, F. K., Herrmann, H. J. and Chiaia, B. M. 2010. Progressive collapse mechanisms of brittle and ductile framed structures. Journal of Engineering Mechanics 136 (8) , pp. 987-995. 10.1061/(ASCE)EM.1943-7889.0000143

Mason, D. J., Whatling, Gemma Marie

, Kotwal, R. S., Brakspear, K., Roberts, H., Wilson, Christopher, Williams, R., Sultan, J. and Holt, Catherine Avril

2010. Can joint realignment surgery reveal mechanically regulated signals that influence pain and pathology in humans? [Abstract]. Journal of Biomechanics 43 (S1) , S51. 10.1016/S0021-9290(10)70107-X

Mason, Deborah Jane

, Whatling, Gemma Marie

, Kotwal, Rahul S., Karen, Brakspear, Helen, Roberts, Chris, Wilson, Rhys, Williams, J, Sultan and Holt, Catherine Avril

2010. Can joint realignment surgery reveal mechanically regulated signals that influence pain and pathology in humans? Presented at: Annual Meeting of the European Research Society (EORS), Davos, Switzerland, 30 June - 2 July 2010.

Masood, Adnan, Porch, Adrian

and Barrow, David Anthony

2010. Microwave resonators for highly sensitive compositional analysis: applications for solvents in microcapillary systems. Lap Lambert Academic Publishing.

Masum, Shakil Al

, Vardon, Philip James, Thomas, Hywel Rhys

, Chen, Q. and Nicholson, D. 2010. Initial investigation of gas pressure development at post closure stage of an underground disposal facility. Presented at: 6th International Congress of Environmental Geotechnics, New Delhi, India, 8-12 November 2010. Proceedings of 6th International Congress of Environmental Geotechnics (6ICEG). New Delhi, India: McGraw Hill, pp. 1735-1738.

Mazurek, Rafal, Marketos, P., Moses, Anthony John and Vincent, J. N. 2010. Effect of artificial burrs on the power loss of a three phase transformer core. IEEE Transactions on Magnetics 46 (2) , pp. 638-641. 10.1109/TMAG.2009.2032094

Mazurek, Rafal, Marketos, Philip, Moses, Anthony John and Belgand, T. 2010. Development of sensors for measurement of localised flux density in transformer cores. Presented at: 8th European Conference on Sensors and Actuators, Bodrum, Turkey, 4-7 July 2010. 8th European Conference on Sensors and Actuators (Abstract Book). Turkey: Uludag University,

McGenn, W., Powell, J., Uren, M., Benedikt, Johannes

and Tasker, Paul

2010. RF waveform method for the determination of the safe operating area of GaN HFET's for amplifiers subjected to high output VSWR. Presented at: European Microwave Week 2010: Connecting the World, (EuMIC 2010), Paris, France, (561371) pp. 282-285.

McGregor, I. and Elgaid, K.

2010. Low-power GaAs comparator and monostable. Electronics Letters 46 (17) , pp. 1214-1215. 10.1049/el.2010.1357

McGregor, Ian, Aghamoradi, Fatemeh and Elgaid, Khaled

2010. An approximate analytical model for the quasi-static parameters of elevated CPW lines. IEEE Transactions on Microwave Theory and Techniques 58 (12) , pp. 3809-3814. 10.1109/TMTT.2010.2086552

McGregor, Ian, Lok, Lai Bun, Hwang, Chi-Jeon, Oxland, Richard, Whyte, Griogair, Thayne, Iain G. and Elgaid, Khaled

2010. Low complexity, low power, 10 GHz super-regenerative transceiver. Presented at: APMC 2009: Asia Pacific Microwave Conference, Singapore, Singapore, 7-10 December 2009. 2009 Asia Pacific Microwave Conference. IEEE, pp. 587-590. 10.1109/APMC.2009.5384157

McLeod, Robert S., Hopfe, Christina J. and Rezgui, Yacine

2010. PassivHaus and PHPP - Do continental design criteria work in a Welsh climatic context? Presented at: BauSim 2010 3rd IBPSA Germany-Austrian Conference, Vienna, Austria, 22-24 September 2010. Published in: Mahdavi, Ardeshir and Martens, B. eds. Building performance simulation in a changing environment :[abstracts of the Third German-Austrian IBPSA Conference, Vienna University of Technology, September 22-24, 2010]. Vienna: Vienna University of Technology,

McNab, Jennifer A., Gallichan, Daniel

and Miller, Karla L. 2010. 3D steady-state diffusion-weighted imaging with trajectory using radially batched internal navigator echoes (TURBINE). Magnetic Resonance in Medicine 63 (1) , pp. 235-242. 10.1002/mrm.22183

McWhirter, John

2010. An algorithm for polynomial matrix SVD based on generalised Kogbetliantz transformations. Presented at: Proceedings of the 2010 European Signal Processing Conference (EUSIPCO 2010), Aalborg, Denmark,

Meesapawong, P., Rezgui, Yacine

and Li, H. 2010. Perceiving the societal value as the core of innovation management in public research and development organizations. Presented at: 5th IEEE International Conference on Management of Innovation and Technoloy (ICMIT2010), Singapore / Singapore,

Meesapawong, Pawadee, Rezgui, Yacine

and Li, Haijiang

2010. Perceiving societal value as the core of innovation management in public research and development organizations. Presented at: 5th IEEE International Conference on Management of Innovation and Technology, Singapore, 2-5 June 2010. The 5th IEEE International Conference on Management of Innovation and Technology. Piscataway, N.J.: IEEE, pp. 312-317. 10.1109/ICMIT.2010.5492708978-1-4244-6565-1

Melikhov, Yevgen

, Krivoruchko, V. N. and Jiles, David 2010. Thermodynamic aspects of hysteresis for half-metallic ferromagnets. Presented at: Joint European Magnetic Symposia (JEMS) 2010, Krakow, Poland, 23–28 August 2010.

Melikhov, Yevgen

, Mierczak, Lukasz and Jiles, David 2010. A new method for evaluation of mechanical stress and depth profiling using the reciprocal amplitude of magnetic Barkhausen noise. Presented at: Universal Network for Magnetic NDE, Prague, Czech Republic, 16-17 September 2010.

Melikhov, Yevgen

and Raghunathan, A. 2010. Description of inverted Hysteresis Loops. Presented at: Condensed Matter and Materials Physics (CMMP10), Warwick University, Warwick, UK, 14-16 December 2010.

Menk, A. and Bordas, Stephane Pierre Alain

2010. Numerically determined enrichment functions for the extended finite element method and applications to bi-material anisotropic fracture and polycrystals. International Journal for Numerical Methods in Engineering 83 (7) , pp. 805-828. 10.1002/nme.2858

Metcalfe, A., Stewart, C., Postans, N., Dodds, A., Smith, H., Holt, Catherine Avril

and Roberts, A. 2010. Biomechanics of the unaffected joints in patients with knee osteoarthritis. Presented at: Proceedings of the British Orthopaedic Research Society, Cardiff, UK,

Metcalfe, A., Stewart, C., Postans, N., Smith, H., Dodds, A., Barlow, D., Holt, Catherine Avril

and Roberts, A. 2010. Biomechanics of the unaffected knee and hips in patients with knee osteoarthritis. Presented at: Proceedings of the 2nd Joint ESMAC/GCMAS Annual Conference, Miami, USA,

Mierczak, Lukasz, Melikhov, Yevgen

and Jiles, David 2010. A new way of determining residual stress in steels using the magnetic Barkhausen effect. Presented at: Progress in Quantitative Nondestructive Evaluation (QNDE), San Diego, CA, USA, 18-23 July 2010.

Mihai, I. C. and Jefferson, Anthony Duncan

2010. The simulation of microcracking and micro-contact in a constitutive model for concrete. Presented at: Proceedings of Euro-C 2003 Computational Modelling of Concrete Structures, Rohrmoos, Austria,

Miles, John Christopher 2010. Genetic algorithms for design. Waszczyszyn, Zenon, ed. Advances of Soft Computing in Engineering, CISM courses and lectures, vol. 512. New York: Springer, pp. 1-56. (10.1007/978-3-211-99768-0_1)

Min, Gao

2010. Optimal Electrical Conductivity for Maximum Thermoelectric Figure of Merit. Journal of Electronic Materials 39 (11) , pp. 2459-2461. 10.1007/s11664-010-1364-4

Min, Gao

2010. Thermoelectric energy harvesting. Beeby, Stephen and White, Neil, eds. Energy Harvesting for Autonomous Systems, Artech House Series: Smart Materials, Structures, and Systems, Norwood, MA: Artech House, pp. 135-157.

Min, Gao

2010. ZT Measurement under large temperature differences. Journal of Electronic Materials 39 (9) , pp. 1782-1785. 10.1007/s11664-010-1136-1

Minev, Ekaterin, Popov, Krastimir Borisov and Minev, Roussi 2010. Grid method for improving the accuracy of layer based RP parts. Presented at: Proceedings of 11th National Conference on Rapid Design, Prototyping and Manufacturing, Lancaster, UK, pp. 27-31.

Minev, R., Ilieva, M., Kettle, J., Lalev, G., Dimov, Stefan Simeonov, Tzaneva, D., Dermendjiev, I. and Shishkov, R. 2010. Deposition and focused ion beam milling of anticorrosive CrC coatings on tool steel substrates. International Journal of Advanced Manufacturing Technology 47 (1-4) , pp. 29-35. 10.1007/s00170-009-2078-8

Minev, Ekaterin, Popov, Krastimir Borisov, Minev, Roussi, Dimov, Stefan Simeonov, Gagov, V. and Packianather, Michael Sylvester

2010. Utilizing a Grid method for Accuracy Study of Micro SLA parts. Presented at: 7th International Conference on Multi-Material Micro Manufacture,, Bourg en Bresse and Oyonnax, France, 17-19 November 2010. Published in: Fillon, B., Khan-Malek, C. and Dimov, Stefan Simeonov eds. Proceedings of the 6th International Conference on Multi-Material Micro Manufacture. Singapore: Research Publishing, pp. 257-260. 10.3850/978-981-08-6555-9_154

Minev, R., Vella, P., Brousseau, Emmanuel Bruno Jean Paul

, Dimov, Stefan Simeonov, Minev, Ekaterin and Matthews, C. 2010. Methodology for capability maturity assessment of MNT chains. Presented at: 6th International Conference on Multi-Material Micro Manufacture (4M2010), Oyonnax, France, pp. 249-252.

Minev, R., Vella, P., Brousseau, Emmanuel Bruno Jean Paul

, Dimov, Stefan Simeonov, Scholz, S. and Matthews, C. 2010. Capability maturity study of the horizontal and vertical integration of structuring, patterning and characterisation MNTs. Presented at: 6th International Conference on Multi-Material Micro Manufacture (4M2010), Oyonnax, France, pp. 253-256.

Moerman, K. M., Sprengers, A. M. J., Nederveen, A. J., Holt, Catherine Avril

, Lally, C. and Simms, C. K. 2010. Non-invasive imaging and inverse finite element analysis for the determination of the mechanical properties of soft tissue. Presented at: 9th International Conference on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Mohseni, Hamid Reza, Ghaderi, Foad, Wilding, Edward Lewis

and Sanei, Saeid 2010. Variational Bayes for Spatiotemporal Identification of Event-Related Potential Subcomponents. IEEE Transactions on Biomedical Engineering 57 (10) , pp. 2413-2428. 10.1109/TBME.2010.2050318

Morozov, Dmitry, Mauskopf, Philip

, Barry, Peter, Brien, Thomas, Prest, Martin and Whall, Terry 2010. High sensitive superconductor-semiconductor-superconductor THz detector. Presented at: 35th International Conference on Infrared, Millimeter, and Terahertz Waves, Rome, Italy, 5-10 September 2010. 35th International Conference on Infrared, Millimeter and Terahertz Waves. IEEE, 10.1109/ICIMW.2010.5612401

Morris, Rhys J.

and Woodcock, John Patrick 2010. Intermittent pneumatic compression or graduated compression stockings for deep vein thrombosis prophylaxis? Annals of Surgery 251 (3) , pp. 393-396. 10.1097/SLA.0b013e3181b5d61c

Moses, Anthony John, Anderson, Philip Ian

, Phophongviwat, Teeraphon

and Tabrizi, Shervin 2010. Contribution of magnetostriction to transformer noise. Presented at: 45th International Universities Power Engineering Conference (UPEC), Cardiff, UK, 31 August - 3 September 2010. 2010 45th International Universities Power Engineering Conference (UPEC 2010). London: Institute of Electrical and Electronics Engineers (IEEE), pp. 956-960.

Muralidhara, S., Raghu Prasad, B. K., Eskandari, H. and Karihaloo, Bhushan Lal

2010. Fracture process zone size and true fracture energy of plain concrete from acoustic emission catalogue. Construction and Building Materials 24 (4) , pp. 479-486. 10.1016/j.conbuildmat.2009.10.014

Murdoch, M., Jonas, P. J. C., Falconer, Roger Alexander

and Lin, BinLiang

2010. A modelling assessment of contaminant distributions in the Severn Estuary. Marine Pollution Bulletin 61 (1-3) , pp. 124-131. 10.1016/j.marpolbul.2009.12.019

N

Nadal, E., Bordas, Stephane Pierre Alain

, Rodenas, J. J., Tarancon, J. E. and Tur, M. 2010. Accurate stress recovery for the two dimension fixed grid finite element method. Presented at: 10th International Conference on Computational Structures Technology, Valencia, Spain, 14-17 September 2010. Published in: Topping, B. H. V., Adam, J. M., Pallarés, F. J., Bru, R. and Romero, M. L. eds. Proceedings of the Tenth International Conference on Computational Structures Technology, Stirlingshire, UK. Civil-Comp Proceedings (93) Stirling: Civil-Comp Press, 10.4203/ccp.93.256

Natarajan, S., Mahapatra, D. R., Kerfriden, Pierre

and Bordas, Stephane Pierre Alain

2010. Numerical Methods for nonlocal elasticity and gradient elasticity. Presented at: European Conference on Computational Mechanics (ECCM-2010), Paris, France,

Natarajan, S., Mahaptra, D. R. and Bordas, Stephane Pierre Alain

2010. Integrating strong and weak discontinuities without integration subcells and example applications in an XFEM/GFEM framework. International Journal for Numerical Methods in Engineering 83 (3) , pp. 269-294. 10.1002/nme.2798

Natarajan, S., N-X., Hung, Kerfriden, Pierre

, Mahapatra, D.R., Askes, H., Rabczuk, T. and Bordas, Stephane Pierre Alain

2010. Non-local elasticity: towards CO continuity requirements for gradient type : Partition of unity (XFEM) enrichment for strong and weak discontinuities. Presented at: 9th World Congress on Computational Mechanics (WCCM/APCOM 2010), Sydney, Australia,

Natarajan, S., Nguyen Xuan, H., Kerfriden, Pierre

, Mahapatra, D. R., Askes, H., Rabczuk, T. and Bordas, Stephane Pierre Alain

2010. Smoothed finite elements and partition of unity finite elements for nonlocal integral and nonlocal gradient elasticity. Presented at: World Congress on Computational Mechanics (WCCM/APCOM 2010), Sydney, Australia,

Natarajan, Sundararajan, Bordas, Stephane Pierre Alain

and Mahapatra, D. Roy 2010. On numerical integration of discontinuous approximations in partition of unity finite elements. Presented at: IUTAM Symposium on Multi-Functional Material Structures and Systems, Bangalore, India, 10-12 December 2008. Published in: Dattaguru, B., Gopalakrishnan, S. and Aatre, V. K. eds. IUTAM Symposium on Multi-Functional Material Structures and Systems. IUTAM Bookseries (19) Dortrecht: Springer, pp. 297-306. 10.1007/978-90-481-3771-8_30

Naylon, Alexander Jack, Gooding, S., John, C., Morgan, Alex John

, Squires, O., Lees, Jonathan

, Barrow, David Anthony

and Porch, Adrian

2010. Efficient Microwave heating and dielectric characterization of microfluidic systems. Presented at: Proceedings of MicroTAS 2010, Groningen, The Netherlands, pp. 2092-2094.

Nestler, J., Morschhauser, A., Hiller, K., Otto, T., Bigot, Samuel

, Auerswald, J., Knapp, H.F., Gavillet, J. and Gessner, T. 2010. Polymer Lab-on-Chip systems with integrated electrochemical pumps suitable for large scale fabrication. The International Journal of Advanced Manufacturing Technology 47 (1-4) , pp. 137-145. 10.1007/s00170-009-1948-4

Nguyen Thanh, N., Nguyen Xuan, H., Bordas, Stephane Pierre Alain

and Rabczuk, T. 2010. Isogeometric finite element analysis using polynomial splines over hierarchical T-meshes. Presented at: World Congress in Computational Mechanics (WCCM2010), Sydney, Australia, 19–23 July 2010. Published in: Khalili, N., Valliappan, S., Li, Q. and Russell, A. eds. Proceedings: 9th World Congress on Computational Mechanics and 4th Asian Pacific Congress on Computational Mechanics. IOP Conference Series: Materials Science and Engineering (10) Institute of Physics, 10.1088/1757-899X/10/1/012238

Nguyen-Thanh, N., Rabczuk, T., Nguyen-Xuan, H. and Bordas, Stephane Pierre Alain

2010. An alternative alpha finite element method (A alpha FEM) for free and forced structural vibration using triangular meshes. Journal of Computational and Applied Mathematics 233 (9) , pp. 2112-2135. 10.1016/j.cam.2009.08.117

Nguyen-Xuan, H., Rabczuk, T., Nguyen-Thanh, N., Nguyen-Thoi, T. and Bordas, Stephane Pierre Alain

2010. A node-based smoothed finite element method with stabilized discrete shear gap technique for analysis of Reissner-Mindlin plates. Computational Mechanics 46 (5) , pp. 679-701. 10.1007/s00466-010-0509-x

Nguyen, Vinh Phu

, Lloberas-Valls, Oriol, Stroeven, Martijn and Sluys, Johannes Lambertus 2010. On the existence of representative volumes for softening quasi-brittle materials - A failure zone averaging scheme. Computer Methods in Applied Mechanics and Engineering 199 (45-48) , pp. 3028-3038. 10.1016/j.cma.2010.06.018

Nicolaides, D., Kanellopoulos, A. D. and Karihaloo, Bhushan Lal

2010. Fatigue life and self-induced volumetric changes of CARDIFRC. Magazine of Concrete Research 62 (9) , pp. 679-683. 10.1680/macr.9.00149

Nlebedim, Cajetan Ikenna, Ranvah, Naresh, Williams, Paul Ieuan

, Melikhov, Yevgen

, Snyder, John Evan, Moses, Anthony John and Jiles, David 2010. Effect of heat treatment on the magnetic and magnetoelastic properties of cobalt ferrite. Journal of Magnetism and Magnetic Materials 322 (14) , pp. 1929-1933. 10.1016/j.jmmm.2010.01.009

Nlebedim, I. C., Ranvah, N., Melikhov, Yevgen

, Williams, Paul Ieuan, Snyder, John Evan, Moses, Anthony John and Jiles, David 2010. Effect of temperature variation on the magnetostrictive properties of coAlxFe2-xO4. Presented at: 11th Joint MMM-INTERMAG Conference, Washington, USA, (BT-09)

Nlebedim, Cajetan Ikenna 2010. Investigation of the structure, magnetic and magnetoelastic properties of cobalt ferrite and its derivatives. PhD Thesis, Cardiff University.

Nlebedim, I. C., Snyder, John Evan, Moses, Anthony John and Jiles, David 2010. Dependence of the magnetic and magnetoelastic properties of cobalt ferrite on processing parameters. Journal of Magnetism and Magnetic Materials 322 (24) , pp. 3938-3942. 10.1016/j.jmmm.2010.08.026

O

O'Doherty, Timothy

, Mason-Jones, Allan

, O'Doherty, Daphne Maria, Evans, Paul Stephen

, Wooldridge, Christopher Frederick and Fryett, Ian Alastair 2010. Considerations of a horizontal axis tidal turbine. Proceedings of the ICE - Energy 163 (3) , pp. 119-130. 10.1680/ener.2010.163.3.119

O'Malley, George, Wu, Jianzhong

2010. Technical requirements of smart electric power distribution networks in the UK. Presented at: 2010 45th International Universities Power Engineering Conference (UPEC) 2010, Cardiff, Wales, UK, 31 August - 3 September 2010. Proccedings of 45th International Universities Power Engineering Conference (UPEC) 2010. Los Alamitos, CA: IEEE,

Osaji, Emeka Efe, Price, Andrew D. F. and Mourshed, Monjur

2010. Special Issue: The role of building performance simulation in the optimization of healthcare building design [Editorial]. Journal of Building Performance Simulation 3 (3) , p. 169. 10.1080/19401493.2010.511049

Osei-Twumasi, Anthony 2010. Integrated modelling studies of solute transport in river basin systems. PhD Thesis, Cardiff University.

Ozturk, H., B., Nair P., T., Bah M., Evans, Samuel Lewin

, Jones, A. M. H. and Browne, M. 2010. Computational and experimental assessment of primary stability of a cementless total hip replacement: The effect of the stem positioning. Presented at: Proceedings of the 9th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

P

Packianather, Michael Sylvester

, Pham, Duc Truong, Charles, E. Y. A., Martina, R., Teti, R., D'Addona, D. and Iodice, G. 2010. Spiking neural network with delay-adaption learning model for decision support in treating dental malocclusions. VIMation Journal 2010 (1) , pp. 48-57.

Page, Katherine 2010. The use of recycled organic waste as soil amendment for growing short rotation coppice. Presented at: 16th European Biosolids and Organic Resources Conference and Exhibition, Leeds, UK, 14-16 November 2011. Published in: Horan, N. J. ed. 16th European Biosolids and Organic Resources Conference Proceedings. Wakefield: Aqua Enviro Technology Transfer,

Palau-Salvador, Guillermo, Stoesser, Thorsten

, Fröhlich, Jochen, Kappler, Michael and Rodi, Wolfgang 2010. Large Eddy Simulations and Experiments of Flow Around Finite-Height Cylinders. Flow, Turbulence and Combustion 84 (2) , pp. 239-275. 10.1007/s10494-009-9232-0

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Awad, B., Cipcigan, Liana Mirela

2010. Impact of residential charging of electric vehicles on distribution networks, a probabilistic approach. Presented at: Proceedings of the Universities Power Engineering Conference (UPEC2010), Cardiff, UK, (564984)

Papadopoulos, P., Skarvelis-Kazakos, S., Grau, I., Cipcigan, Liana Mirela

and Jenkins, N. 2010. Predicting Electric Vehicle impacts on residential distribution networks with Distributed Generation. Presented at: Vehicle Power and Propulsion Conference (VPPC), 2010, Lille, France, 1-3 September 2010. Vehicle Power and Propulsion Conference (VPPC), 2010. IEEE, pp. 1-5. 10.1109/VPPC.2010.5729009

Papadopoulos, P., Umenei, A. E., Grau, I., Williams, R., Cipcigan Mirela, Liana

and Melikhov, Yevgen

2010. Effectiveness of a new inductive fault current limiter model in MV networks. Presented at: 45th International Universities Power Engineering Conference (UPEC 2010), Cardiff, UK,

Patel, Raj B., Bennett, Anthony

, Farrer, Ian, Nicoll, Christine A., Ritchie, David A. and Shields, Andrew J. 2010. Two-photon interference of the emission from electrically tunable remote quantum dots. Nature Photonics 4 (9) , pp. 632-635. 10.1038/nphoton.2010.161

Pelaez, Ana, Rodriguez-Testera, A,, Mojon, O., Fernandez-Barciela, M., Tasker, Paul J.

and Alonso, J. I. 2010. Utilization and validation of HBT nonlinear frequency domain behavioral models in the design and simulation of oscillator circuits. Presented at: 2010 European Microwave Conference (EuMC), Paris, France, 28-30 September 2010. Proceedings of the 2010 European Microwave Conference (EuMC). Los Alamitos, CA: IEEE, pp. 481-484.

Perni, Stefano, Prokopovich, Polina

, Parkin, Ivan P., Wilson, Michael and Pratten, Jonathan 2010. Prevention of biofilm accumulation on a light-activated antimicrobial catheter material. Journal of Materials Chemistry 20 (39) , pp. 8668-8673. 10.1039/C0JM01891K

Persson, C., Evans, Samuel Lewin

, Marsh, Rainy, Summers, J. L. and Hall, R. M. 2010. Poisson's ratio and strain rate dependency of the constitutive behavior of spinal dura mater. Annals of Biomedical Engineering 38 (3) , pp. 975-983. 10.1007/s10439-010-9924-6

Pham, Duc Truong and Soroka, Anthony John

2010. Pheromone marking as method for implementing memory in the Bees Algorithm. Presented at: IPROMS 2010: Sixth Virtual International Conference, 15-26 November 2010.

Pham, Duc Truong, Eldbib, Khaled, Bigot, Samuel

and Packianather, Michael Sylvester

2010. A data ordering method for the RULES family of algorithms. Presented at: I*PROMS 2009 Conference :Innovative Production Machines and Systems, Cardiff, UK, July 6-17 2009. Published in: Pham, Duc Truong, Eldukhri, E. E. and Soroka, A. J. eds. Innovative production machines and systems: fifth I*PROMS Virtual Conference, 6-17th July 2009. Dunbeath: Whittles, pp. 200-205.

Pirouti, Marouf, Wu, J., Ekanayake, Janaka Bandara

2010. Dynamic modelling and control of a direct-combustion biomass CHP unit. Presented at: 45th International Universities Power Engineering Conference (UPEC), Cardiff, Wales, (564924)

Popov, Krastimir Borisov, Dimov, Stefan Simeonov, Ivanov, Atanas, Pham, Duc Truong and Gandarias, Endika 2010. New tool-workpiece setting up technology for micro-milling. International Journal of Advanced Manufacturing Technology 47 (1-4) , pp. 21-27. 10.1007/s00170-009-2055-2

Porch, Adrian

, Masood, A., Naylon, Alexander Jack, Sulaimalebbe, A. and Barrow, David Anthony

2010. Sapphire dielectric resonator for microfluidic compositional analysis. Presented at: Proceedings of MicroTAS 2010, Groningen, The Netherlands, pp. 2011-2013.

Porch, Adrian

, Odili, D. and Childs, P. A. 2010. Microwave characteristics of nanotube powders. Presented at: 34th Workshop on Compound Semiconductors and Integrated Circuits, Darmstadt, Germany, 17-19 May 2010. Proceedings of 34th Workshop on Compound Semiconductors and Integrated Circuits, Darmstadt. pp. 185-186.

Price, A. K., Hopfe, Christina J. and McLeod, Robert S. 2010. An investigation into the achievable energy savings provided by low energy lighting systems and the corresponding levels of visual comfort. Presented at: BauSim 2010 3rd IBPSA Germany-Austrian Conference, Vienna, Austria, 22-24 September 2010. Published in: Mahdavi, Ardeshir and Martens, B. eds. Building performance simulation in a changing environment :[abstracts of the Third German-Austrian IBPSA Conference, Vienna University of Technology, September 22-24, 2010]. Vienna: Vienna University of Technology,

Prickett, Paul William

, Grosvenor, Roger Ivor

and Alyami, M. 2010. Microcontroller-based monitoring of pneumatic systems. Presented at: 5th International Federation of Automatic control (IFAC) Symposium on Mechatronic Systems, Cambridge, USA, pp. 614-619. 10.3182/20100913-3-US-2015.00008

Prokopovich, Polina

and Perni, S. 2010. Prediction of the frictional behavior of mammalian tissues against biomaterials. Acta Biomaterialia 6 (10) , pp. 4052-4059. 10.1016/j.actbio.2010.05.007

Prokopovich, Polina

, Perni, S., Piccirillo, C., Pratten, J., Parkin, I. P. and Wilson, M. 2010. Frictional Properties of Light-activated Silicone and Polyurethane against blood vessels. Journal of Materials Science: Materials in Medicine 21 (2) , pp. 815-821. 10.1007/s10856-009-3882-2

Prokopovich, Polina

and Perni, Stefano 2010. Multiasperity contact adhesion model for universal asperity height and radius of curvature distributions. Langmuir 26 (22) , pp. 17028-17036. 10.1021/la102208y

Prokopovich, Polina

, Theodossiades, S., Rahnejat, H. and Hodson, D. 2010. Friction in ultra-thin conjunction of valve seals of pressurised metered dose inhalers. Wear 268 (5-6) , pp. 845-852. 10.1016/j.wear.2009.12.003

Prokopovich, Polina

, Theodossiades, Stephanos, Rahnejat, Homer and Hodson, D. 2010. Nano- and component level friction of rubber seals in dispensing devices. Presented at: ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, San Diego, CA, USA, 30 August-2 September 2009. ASME Power Transmission and Gearing Conference; 3rd International Conference on Micro- and Nanosystems; 11th International Conference on Advanced Vehicle and Tire Technologies. DETC2009: PROCEEDINGS OF THE ASME INTERNATIONAL DESIGN ENGINEERING TECHNICAL CONFERENCES/COMPUTERS AND INFORMATION IN ENGINEERING CONFERENCE. ASME Conference Proceedings (6) New York: ASME, pp. 339-344. 10.1115/DETC2009-86035

Pullin, Rhys

, Clarke, Alastair

and McCory, J. P. 2010. Detection of cracking in gear teeth using Acoustic Emission. Applied Mechanics and Materials 24-25 , pp. 45-50. 10.4028/www.scientific.net/AMM.24-25.45

Pullin, Rhys

, Clarke, Alastair

and McCrory, John 2010. Detection of cracking in gear teeth using acoustic emission. Presented at: 7th BSSM International Conference on Advances in Experimental Mechanics, Liverpool, UK, 7-9 September 2010.

Pullin, Rhys

, Hensman, J. J., Holford, Karen Margaret

, Worden, K. and Evans, Samuel Lewin

2010. Validation of acoustic emission (AE) crack detection in aerospace grade steels using Digital Image Correlation (DIC). Presented at: 7th BSSM International Conference on Advances in Experimental Mechanics, Liverpool, UK, 7 - 9 September 2010. Published in: Mines, R. A. W. and Dulieu-Barton, J. M. eds. Advances in Experimental Mechanics. Applied Mechanics and Materials (24-25) Zurich: Trans Tech Publications, pp. 221-226. 10.4028/www.scientific.net/AMM.24-25.221

Q

Qadrdan, Meysam

, Chaudry, Modassar

, Ekanayake, Janaka

2010. Impact of wind variability on GB gas and electricity supply. Presented at: IEEE International Conference on Sustainable Energy Technologies (ICSET), Kandy, Sri Lanka, 6-9 December 2010. Sustainable Energy Technologies (ICSET), 2010 IEEE International Conference. Piscataway: IEEE, pp. 1-6. 10.1109/ICSET.2010.5684953

Qadrdan, Meysam

, Chaudry, Modassar

, Jenkins, Nicholas

and Ekanayake, Janaka Bandara

2010. Impact of a large penetration of wind generation on the GB gas network. Energy Policy 38 (10) , pp. 5684-5695. 10.1016/j.enpol.2010.05.016

Qu, S., Kennedy, David

and Featherston, Carol Ann

2010. Multilevel postbuckling design of aircraft wing using VICONOPT MLO. Presented at: Proceedings of 3rd International Conference on Modelling, Simulation and Optimization, Beijing, China, pp. 111-114.

Qureshi, Asma, Theobald, Peter

, Paul, K. and Jones, Michael David

2010. Biomechanical investigation into the torsional failure of paediatric long bone. Presented at: 17th Congress of the European Society of Biomechanics (ESB2010), Edinburgh, UK, 5-8 July 2010.

Qureshi, Asma, Theobald, Peter

, Paul, K and Jones, M. D. 2010. The influence of strain rate on the angle of spiral fracture in paediatirc long bone [Abstract]. European Journal of Trauma and Emergency Surgery 36 (S1) , p. 141.

R

Rabczuk, T., Bordas, Stephane Pierre Alain

and Askes, H. 2010. Meshfree methods for dynamic fracture. Computational Technology Reviews 1 , pp. 157-185. 10.4203/ctr.1.6

Rabczuk, T., Nguyen Thanh, N., Nguyen Xuan, H., Nguyen-Thoi, T. and Bordas, Stephane Pierre Alain

2010. Isogeometric finite element analysis using polynomial splines over hierarchical T-meshes. Presented at: IV European Conference on Computational Mechanics (ECCM 2010), Paris, France, 16-21 May 2010.

Rabczuk, T., Zi, G., Bordas, Stephane Pierre Alain

and Nguyen-Xuan, H. 2010. A simple and robust three-dimensional cracking-particle method without enrichment. Computer Methods in Applied Mechanics and Engineering 199 (37-40) , pp. 2437-2455. 10.1016/j.cma.2010.03.031

Raghunathan, Arun 2010. Growth, characterisation and modelling of novel magnetic thin films for engineering applications. PhD Thesis, Cardiff University.

Raghunathan, Arun Kumar, Melikhov, Yevgen

, Snyder, John Evan and Jiles, David 2010. Theoretical model of temperature eependence of hysteresis based on mean field theory. IEEE Transactions on Magnetics 46 (6) , pp. 1507-1510.

Raghunathan, Arun Kumar, Nlebedim, Ikenna, Jiles, David and Snyder, John Evan 2010. Growth of crystalline cobalt ferrite thin films at lower temperatures using pulsed-laser deposition technique. Journal of Applied Physics 107 (9) , 09A516. 10.1063/1.3357315

Raghunathan, Arun, Melikhov, Yevgen

, Snyder, John Evan and Jiles, David 2010. Theoretical Model of Temperature Dependence of Hysteresis Based on Mean Field Theory. IEEE Transactions on Magnetics 46 (6) , pp. 1507-1510. 10.1109/TMAG.2010.2045351

Ramaswamya, R., Evans, Samuel Lewin

and Kosashvili, Y. 2010. Holding power of variable pitch screws in osteoporotic, osteopenic and normal bone: Are all screws created equal? Injury 41 (2) , pp. 179-183. 10.1016/j.injury.2009.08.015

Ranvah, Naresh 2010. Investigation of chemically substituted cobalt ferrite for high magnetostriction based sensor and actuator applications. PhD Thesis, Cardiff University.

Redif, S., McWhirter, John

and Weiss, S. 2010. Orthonormal subband coder design using polynomial eigenvalue decomposition. Presented at: European Signal Processing Conference (EUSIPCO-2010), Aalborg, Denmark,

Rezgui, Yacine

, Hopfe, Christina J. and Vorakulpipat, C. 2010. Generations of knowledge management in the architecture, engineering and construction industry: An evolutionary perspective. Advanced Engineering Informatics 24 (2) , pp. 219-228. 10.1016/j.aei.2009.12.001

Rezgui, Yacine

, Wilson, Ian E. and Li, Haijiang

2010. Promoting sustainability awareness through energy engaged virtual communities of construction stakeholders. Presented at: 11th IFIP WG 5.5 Working Conference on Virtual Enterprises, PRO-VE, St. Etienne, France, 11-13 October 2010. Published in: Camarinha-Matos, Luis, Boucher, Xavier and Afsarmanesh, Hamideh eds. Collaborative Networks for a Sustainable World. IFIP Advances in Information and Communication Technology (336) Berlin: Springer-Verlag, pp. 142-148. 10.1007/978-3-642-15961-9_16

Rezgui, Yacine

, Wilson, Ian Eric and Li, H. 2010. Promoting sustainability awareness thought energy engaged virtual communities of construction stakeholders. Presented at: 11th IFIP Working Conference on Virtual Enterprises (PRO-VE 2010), St. Etienne, France,

Rezgui, Yacine

, Wilson, Ian Eric, Miles, John Christopher and Hopfe, Christina J. 2010. Federating information portals through an ontology-centred approach: A feasibility study. Advanced Engineering Informatics 24 (3) , pp. 340-354. 10.1016/j.aei.2010.02.001

Roberts, G. L., Yewlett, A., Ball, S., Whatling, Gemma Marie

2010. What is the optimum method for applying a cervical spine collar? (Abstract). Journal of Biomechanics. 43 (S1) , S49-S50.

Roberts, M., Curtis, E., Mani, M., Goodwin, N., Wilkes, A. R., Zatman, T. and Holt, Catherine Avril

2010. Mouth opening and jaw protrusion measured using three-dimensional motion analysis (Abstract). Anaesthesia 65 (4) , pp. 428-429. 10.1111/j.1365-2044.2010.6280.x

Roberts, M., Curtis, E., Mani, M., Goodwin, Naomi, Wilkes, Antony Robert, Zatman, Tahsin and Holt, Catherine Avril

2010. Hyoid movements measured using three-dimensional motion analysis (Abstract). British Journal of Anaesthesia 104 (4) , pp. 522-523. 10.1093/bja/aep362

Robinson, Ben, Amirabdollahian, Farshid, Ji, Ze

and Dautenhahn, Kerstin 2010. Tactile interaction with a humanoid robot for children with autism: A case study analysis involving user requirements and results of an initial implementation. Presented at: 19th International Symposium in Robot and Human Interactive Communication, Viareggio, 13-15 September 2010. 19th International Symposium in Robot and Human Interactive Communication. p. 704. 10.1109/ROMAN.2010.5598641

Robson, Stephen

, Griffiths, Huw and Haddad, Abderrahmane

2010. Narrowband power line communications: channel characteristics and modulation. Presented at: 4th International Universities Power Engineering Conference, Cardiff, UK, 31 August - 3 September 2010. 2010 45th International Universities Power Engineering Conference (UPEC 2010). London: Institute of Electrical and Electronics Engineers (IEEE), pp. 1310-1315.

Robson, Stephen

and Griffiths, Huw 2010. Simulation of power line communication using ATP-EMTP and MATLAB. Presented at: IEEE PES Conference on Innovative Smart Grid Technologies Europe, Gothenburg, Sweden, 11-13 October 2010. IEEE PES Conference on Innovative Smart Grid Technologies Europe (ISGT Europe 2010). Piscataway, N.J: Institute of Electrical and Electronics Engineers, pp. 92-99. 10.1109/ISGTEUROPE.2010.5638862

Roccabianca, S., Gei, Massimiliano

and Bigoni, D. 2010. Plane strain bifurcations of elastic layered structures subject to finite bending: theory versus experiments. Ima Journal of Applied Mathematics 75 (4) , pp. 525-548. 10.1093/imamat/hxq020

Rodenas, J. J., Gonzalez Estrada, Octavio Andres, Diez, P. and Fuenmayor, F. J. 2010. Accurate recovery-based upper error bounds for the extended finite element framework. Computer Methods in Applied Mechanics and Engineering 199 (37-40) , pp. 2607-2621. 10.1016/j.cma.2010.04.010

Rodriguez-Testera, A., Mojon, O., Fernandez-Barciela, M., Sanchez, E. and Tasker, Paul J.

2010. Nonlinear HBT table-based model including low-frequency noise effects. Electronics letters 46 (9) , pp. 635-636. 10.1049/el.2010.2883

Rogers, Daniel J.

, Divan, Deepak M. and Green, Tim C. 2010. Modelling and optimal switching pattern generation for AC to AC power converters. Presented at: 2010 IEEE Power & Energy Society General Meeting, Minneapolis, MN, USA, 25-29 July 2010. 2010 IEEE Power and Energy Society General Meeting, Minneapolis, MN, 25-29 July 2010. Piscataway, NJ: IEEE, 10.1109/PES.2010.5590043

Rogers, Daniel J.

and Green, Tim C. 2010. A hybrid diverter design for distribution level on-load tap changers. Presented at: 2010 IEEE Energy Conversion Congress and Exposition (ECCE, Atlanta, GA, USA, 12-16 September 2010. Energy Conversion Congress and Exposition (ECCE), 2010 IEEE. IEEE, pp. 1493-1500. 10.1109/ECCE.2010.5618245

Rogers, Daniel J.

and Green, Tim C. 2010. Zero-current zero-voltage switching for on-load tap-changers. Presented at: Power Electronics, Machines and Drives (PEMD), Brighton, UK, 19-21 April 2010. 5th IET Conference on Power Electronics, Machines and Drives. IEEE, 10.1049/cp.2010.0039

Rowe, David James, Naylon, Alexander Jack, Porch, Adrian

, Barrow, David Anthony

and Allender, Christopher John 2010. Microwave resonant sensor for real-time continuous-flow measurements of microfluidic systems. Presented at: 14th International Conference on Miniaturized Systems for Chemistry and Life Sciences 2010 : (MicroTAS 2010), Groningen, The Netherlands, 3-7 October 2010. Published in: Verpoorte, Sabeth ed. 14th International Conference on Miniaturized Systems for Chemistry and Life Sciences 2010 : (MicroTAS 2010) : Groningen, The Netherlands, 3-7 October 2010. San Diego, CA: Chemical and Biological Microsystems Society, pp. 1004-1006.

S

Saini, Randeep, Woodington, Simon P., Lees, Jonathan

2010. An intelligence driven active loadpull system. Presented at: 75th ARFTG Microwave Measurement Conference: Measurement of Modulated Signals for Communications, Anaheim, USA, (549632)

Sanei, Saeid and Makkiabadi, B. 2010. Tensor factorization with application to convolutive blind source separation of speech. Wang, Wenwu, ed. Machine Audition: Principles, Algorithms and Systems, Hershey, PA: Information Science Reference,, pp. 186-206.

Sarhosis, Vasilis, Garrity, S. W. and Sheng, Y. 2010. Computational modelling of clay brickwork walls containing openings. Presented at: 8th International Masonry Conference 2010, Dresden, Germany, 4-7 July 2010. Proceedings of the 8th International Masonry Conference 2010. UK: International Masonry Society,

Sarkar, Partha, Haddad, Abderrahmane

, Waters, Ronald T., Griffiths, Huw, Harid, Noureddine

and Charalampidis, Panagiotis 2010. Inclined-plane tests of textured silicone rubber samples. Presented at: International Conference on High Voltage Engineering and Application, New Orleans, LA, USA, 11-14 October 2010. 2010 International Conference on High Voltage Engineering and Application (ICHVE 2010). New York: IEEE, pp. 532-535. 10.1109/ICHVE.2010.5640708

Sawle, Leanne

, Mathews, M., Freeman, J. and Marsden, J. 2010. Developing a dynamic elastomeric fabric orthosis to aid return to sport after lumbopelvic injury. British Journal of Sports Medicine 44 (14) , i2. 10.1136/bjsm.2010.078972.5

Sawle, Leanne

, Mathews, M., Freeman, J. and Marsden, J. 2010. Evaluation of customised dynamic elastomeric fabric orthoses for aiding return to sport after lumbopelvic injury. British Journal of Sports Medicine 44 (14) , i2. 10.1136/bjsm.2010.078972.6

Sedighi, Majid, Thomas, Hywel

, Vardon, Philip James and Seetharam, S. C. 2010. Advances in modelling the non-isothermal behaviour of multicomponent chemicals in unsaturated soils. Presented at: 6th International Congress on Environmental Geotechnics (6ICEG), New Delhi, India, 8-12 November 2010. Proceedings of the 6th International Congress of Environmental Geotechnics (6ICEG),. Tata McGraw Hill Education, pp. 1619-1622.

Setchi, Rossitza

and Bouchard, C. 2010. In search of design inspiration: a semantic-based approach. Journal of Computing and Information Science in Engineering 10 (3) , 031006. 10.1115/1.3482061

Sevcenco, Yura Alexander

, Crayford, Andrew Philip

, Marsh, Richard

, Bowen, Philip John

, Miller, Michael N. and Johnson, Mark P. 2010. Evaluation of a particulate sampling methodology from a gas turbine exhaust using real-time size and number analysis at simulated aircraft conditions. Presented at: ASME Turbo Expo 2010: Power for Land, Sea, and Air, Glasgow, UK, 14-18 June 2010. ASME Turbo Expo 2010: Power for Land, Sea, and Air Volume 2: Combustion, Fuels and Emissions, Parts A and B. Proceedings Of The Asme Turbo Expo 2010, Vol 2, Pts A And B. ASME, pp. 1113-1124. 10.1115/GT2010-23415

Sheikh, Aamir Salim 2010. High power waveform engineering. PhD Thesis, Cardiff University.

Shi, Lei and Setchi, Rossitza

2010. An ontology based approach to measuring the semantic similarity between information objects in personal information collections. Presented at: KES 2010: Knowledge-Based and Intelligent Information and Engineering Systems, Cardiff, UK, 8-10 September 2010. Published in: Setchi, Rossitza M.

and Jordanov, Ivan eds. Knowledge-Based and Intelligent Information and Engineering Systems:14th International Conference, KES 2010, Cardiff, UK, September 8-10, 2010, Proceedings, Part I. Lecture Notes in Computer Science. Lecture Notes in Computer Science, Vol. 6276 , vol.6276 Springer Verlag, pp. 617-626. 10.1007/978-3-642-15387-7_65

Shikder, Shariful H., Mourshed, Monjur

and Price, Andrew D. F. 2010. Luminaire position optimisation using radiance based simulation: A test case of a senior living room. Presented at: The International Conference on Computing in Civil and Building Engineering (ICCCBE), Nottingham, UK, 30 June - 2 July 2010. Published in: Tizani, W ed. Proceedings of the International Conference on Computing in Civil and Building Engineering. Nottingham: Nottingham University Press, pp. 379-387.

Shikder, Shariful H., Mourshed, Monjur

and Price, Andrew D. F. 2010. Optimisation of a daylight-window: Hospital patient room as a test case. Presented at: The International Conference on Computing in Civil and Building Engineering (ICCCBE), Nottingham, UK, 30 June - 2 July 2010. Published in: Tizani, W. ed. Proceedings of the International Conference on Computing in Civil and Building Engineering. Nottingham: Nottingham University Press, pp. 387-394.

Shikder, Shariful, Price, Andrew and Mourshed, Monjur

2010. Interactive constraint-based space layout planning. Presented at: CIB World Building Congress, Salford, 10-13 May 2010. Published in: Barrett, P. ed. Proceedings of CIB World Building Congress 2010: Building a Better World. Salford, UK: Conseil International du Bâtiment (CIB),

Shikder, Shariful, Price, Andrew and Mourshed, Monjur

2010. A systematic review on the therapeutic lighting design for the elderly. Presented at: CIB World Building Congress, Salford, UK, 10th-13th May 2010. Published in: Barrett, P. ed. Proceedings of CIB World Building Congress 2010: Building a Better World. Salford, UK: Conseil International du Bâtiment (CIB),

Siddiqui, Raees Ahmed, Grosvenor, Roger Ivor

and Prickett, Paul William

2010. An overview of a microcontroller based approach to intelligent machine tool monitoring. Lecture Notes in Computer Science 6277 , pp. 371-380. 10.1007/978-3-642-15390-7_38

Siddiqui, Rameez Asif, Grosvenor, Roger Ivor

and Prickett, Paul William

2010. An Overview of a Microcontroller based approach to Intelligent Machine Tool Monitoring. Presented at: 14th International Conference on Knowledge-Based and Intelligent Information and Engineering Systems (KES 2010), Cardiff, UK, pp. 371-380.

Simpson, Robert Napier and Trevelyan, Jon 2010. An enriched dual Boundary Element Method for fracture mechanics. IOP Conference Series: Materials Science and Engineering 10 , 012047. 10.1088/1757-899X/10/1/012047

Singh, Rao Martand, Thomas, Hywel Rhys

and Cleall, Peter John

2010. Heat and mass migration in MX-80 Bentonite subject to thermo-hydraulic gradient. Presented at: 6th International Congress on Environmental Geotechnics (6ICEG), New Delhi, India, 8-12 November 2010. Published in: Datta, Manoj ed. Proceedings of the 6th International Congress on Environmental Geotechnics (6ICEG) November 8 - 12 2010 (New Delhi, India). , vol.2 McGraw Hill, pp. 1646-1649.

Skarvelis-Kazakos, Spyros, Papadopoulos, Panagiotis, Grau, Inaki, Gerber, A., Cipcigan, Liana Mirela

, Jenkins, Nicholas

and Carradore, L. 2010. Carbon optimized virtual power plant with electric vehicles. Presented at: 45th Universities Power Engineering Conference (UPEC), Cardiff, UK,

Snidle, Raymond Walter

and Evans, Henry Peredur

2010. Mixed lubrication and prediction of surface fatigue in gear tooth contacts. Presented at: International Conference on Gears, Garching, Germany, 4-6 Ocober 2010. Proceedings of International Conference on Gears (October 2010, Dusseldorf, Germany). VDI-Berichte (2108) Düsseldorf: VDI-Verlag, pp. 215-224.

Soe, Shwe 2010. Improving dimensional accuracy in the production of a CastForm™ polystyrene pattern for investment casting. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 224 (11) , pp. 1663-1670. 10.1243/09544054JEM1566

Somkun, S., Klimczyk, Piotr, Moses, Anthony John and Anderson, Philip Ian

2010. Comparison of AC magnetostriction of non-oriented electrical steels measured in Epstein and disc samples. Presented at: Magnetic Measurements 2010, Prague, Czechoslavakia, 12-15 September 2010. Magnetic Measurements 2010: Book of Abstracts. Prague: Czech Technical University in Prague, pp. 28-29.

Somkun, S., Moses, Anthony John, Anderson, Philip Ian

and Klimczyk, P. 2010. Magnetorestriction anisotropy and rotational magnetorestriction of a non-oriented electrical steel. IEEE Transactions on Magnetics 46 (2) , pp. 302-305. 10.1109/TMAG.2009.2033123

Somkun, S., Moses, Anthony John, Anderson, Philip

and Klimczyk, Piotr 2010. Quantification of magnetostriction for analysis of vibration of electrical machine stator cores. Presented at: 45th International Universities Power Engineering Conference UPEC 2010, Cardiff, UK, 31 August - 3 September 2010. 45th International Universities Power Engineering Conference UPEC 2010. London: IEEE, pp. 91-96.

Somkun, Sakda

2010. Magnetostriction and magnetic anisotropy in non-oriented electrical steels and stator core laminations. PhD Thesis, Cardiff University.

Somkun, Sakda

, Klimczyk, Piotr, Moses, Anthony John and Anderson, Philip Ian

2010. Comparisons of AC magnetostriction of non-oriented electrical steels measured in Epstein and disc samples. Journal of Electrical Engineering 61 (7/s) , pp. 89-92.

Soroka, Anthony John

2010. Agent-based System for knowledge acquisition and management within a networked enterprise. Benyoucef, Lyes and Grabot, Bernard, eds. Artificial Intelligence Techniques for Networked Manufacturing Enterprises Management, Springer Series in Advanced Manufacturing, Dordrecht: Springer, pp. 43-86.

Stoesser, Thorsten

2010. Physically realistic roughness closure scheme to simulate turbulent channel flow over rough beds within the framework of LES. Journal of Hydraulic Engineering 136 (10) , pp. 812-819. 10.1061/(ASCE)HY.1943-7900.0000236

Stoesser, Thorsten

, Kara, Sibel, McVicar, B. and Best, J. 2010. Turbulent flow over a mildly sloped pool-riffle sequence. Presented at: Riverflow 2010: 5th International Conference on Fluvial Hydraulics, Braunschweig, Germany, 8-10 September 2010.

Stoesser, Thorsten

, Kim, S. J. and Diplas, P. 2010. Turbulent Flow through Idealized Emergent Vegetation. Journal of Hydraulic Engineering 136 (12) , pp. 1003-1017. 10.1061/(ASCE)HY.1943-7900.0000153

Stoesser, Thorsten

, Ruether, Nils and Olsen, Nils Reidar Boe 2010. Calculation of primary and secondary flow and boundary shear stresses in a meandering channel. Advances in Water Resources 33 (2) , pp. 158-170. 10.1016/j.advwatres.2009.11.001

Stokes, O. D., Theobald, Peter

, Pugh, Neil D.

and Nokes, Leonard Derek Martin

2010. Panoramic ultrasound to measure in vivo teno Achilles strain. Foot and Ankle International 31 (10) , pp. 905-909. 10.3113/FAI.2010.0905

Stoutenburg, E. D., Jenkins, Nicholas

and Jacobsen, M. Z. 2010. Power output variations of co-located offshore wind turbines and wave energy converters in California. Renewable Energy 35 (12) , pp. 2781-2791. 10.1016/j.renene.2010.04.033

Stroud, Lindsay Ann, Lovern, B. J., Ferran, N., Evans, R., Evans, Samuel Lewin

2010. Quantifying glenohumeral joint translation in multidirectional instability patients and healthy volunteers. Presented at: Proceedings of the European Society of Biomechanics 17th Congress, Edinburgh, UK,

Stroud, Lindsay Ann, Lovern, B., Evans, R., Evans, Samuel Lewin

2010. Estimating the glenohumeral joint centre of rotation: regression equations versus helical axis. Presented at: 9th International Conference on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Stroud, Lindsay Ann, Lovern, B., Evans, Samuel Lewin

2010. Investigating the use of digital image correlation to quantify scapula function. Presented at: 9th International Conference on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Stupakov, O., Wood, R., Melikhov, Yevgen

and Jiles, David 2010. Measurement of electrical steels with direct field determination. IEEE Transactions on Magnetics 46 (2) , pp. 298-301. 10.1109/TMAG.2009.2032861

Suarez Alvarez, Maria Del Mar 2010. Design and analysis of clustering algorithms for numerical, categorical and mixed data. PhD Thesis, Cardiff University.

Sulaymon, A. H., Wilson, Catherine

and Alwared, A. I. 2010. Experimental Determination of the Virtual Mass Coefficient for Two Spheres Accelerating in a Power Law Fluid. ASME Journal of Fluids Engineering 132 (12) , 121204. 10.1115/1.4003001

Sun, W., Xu, W. T., Lin, J. H., Kennedy, David

and Williams, Frederick Ward 2010. Ride-comfort-oriented suspension optimization using the pseudo-excitation method. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 224 (11) , pp. 1357-1367. 10.1243/09544070JAUTO1417

Sun, Qiang, Wu, Jianzhong

, Zhang, Yibin, Jenkins, Nicholas

and Ekanayake, Janaka Bandara

2010. Comparison of the development of Smart Grids in China and the United Kingdom. Presented at: IEEE PES Conference on Innovative Smart Grid Technologies Europe, Göteborg, Sweden, 11-13 October 2010. IEEE PES Conference on Innovative Smart Grid Technologies Europe, October 11-13, 2010, Gothenburg, Sweden. Los Alamitos, CA: IEEE, 10.1109/ISGTEUROPE.2010.5638885

Suvio, Piia, Sapsford, Devin James

, Griffiths, Anthony John, Williams, Keith Philip, Davies, J. D. and Maynard, S. 2010. High-density sludge process applied to metal-containing effluent. Presented at: Tenth International Conference on Modelling, Monitoring and Management of Water Pollution, Bucharest, Romania, 9-11 June 2010. Published in: Brebbia, C. A. and Marinov, A. M. eds. Water Pollution X. WIT Transactions on Ecology and the Environment (135) Southampton: WIT Press, pp. 289-299.

T

Tang, H. W., Lei, Y., Lin, BinLiang

, Zhou, Y. L. and Gu, Z. H. 2010. Artificial intelligence model for water resources management. Proceedings of the ICE - Water Management 163 (4) , pp. 175-187. 10.1680/wama.2010.163.4.175

Tayton, E., Evans, Samuel Lewin

and O'Doherty, Daphne Maria 2010. Mapping the strain distribution on the proximal femur with titanium and flexible-stemmed implants using digital image correlation. Journal of Bone and Joint Surgery - British Volume 92-B (8) , pp. 1176-1181. 10.1302/0301-620X.92B8.23553

Teo, Fang Yenn 2010. Study of the hydrodynamic processes of rivers and floodplains with obstructions. PhD Thesis, Cardiff University.

Theobald, Peter

, Swaminathan, Ramesh, Qureshi, Asma and Jones, Michael David

2010. The biomechanical consequence of removing the periosteum from paediatric bone exposed to spiral fracture. Presented at: 17th Congress of the European Society of Biomechanics (ESB2010), Edinburgh, UK, 5-8 July 2010.

Theobald, Peter

, Whitelegg, L., Nokes, Leonard Derek Martin

and Jones, Michael David

2010. The predicted risk of head injury from fall related impacts on to third-generation artificial turf and grass soccer surfaces: A comparative biomechanical analysis. Sports Biomechanics 9 (1) , pp. 29-37. 10.1080/14763141003690245

Theobald, Peter

, Whitelegg, L., Nokes, Leonard Derek Martin

and Jones, Michael David

2010. Using head injury criterion (HIC) to assess the risk of concussion following head impact. Presented at: 17th Congress of the European Society of Biomechanics (ESB2010), Edinburgh, UK, 5-8 July 2010.

Thomas, Juliette M., Beevers, D. J., Dowson, D., Jones, Michael David

, King, Pauline and Theobald, Peter

2010. The lubrication of synthetic tissue grafts and healthy tendon. Presented at: 17th Congress of the European Society of Biomechanics (ESB2010), Edinburgh, UK, 5-8 July 2010.

Thomas, Hywel Rhys

, Seetharam, Suresh Channarayapatna and Vardon, Philip James 2010. On the inclusion of some biological impacts and influences in coupled transport phenomena in unsaturated soil. Geotechnical and Geological Engineering 29 (2) , pp. 181-191. 10.1007/s10706-010-9316-6

Tighilt, F., Bayadi, A. and Haddad, Abderrahmane

2010. Voltage distribution on ZnO polymeric arrester under pollution conditions. Presented at: 45th International Universities Power Engineering Conference, Cardiff, UK, 31 August - 3 September 2010. 2010 45th International Universities' Power Engineering Conference (UPEC 2010). London: Institute of Electrical and Electronics Engineers (IEEE), pp. 623-627.

Tripathy, Snehasis

, Bag, Ramakrishna and Thomas, Hywel Rhys

2010. Desorption and consolidation behaviour of initially saturated clays. Presented at: Proceedings of 5th International Conference on Unsaturated Soils, Barcelona, Spain, Published in: E., Alonso E. and Gens, A. eds. Taylor & Francis, pp. 381-386.

Tripathy, Snehasis

and Mishra, A. K. 2010. On the use of Skempton's compression index equation. Geotechnical and Geological Engineering 29 (1) , pp. 129-135. 10.1007/s10706-010-9359-8

Turner, S., Moses, Anthony John, Hall, Jeremy Peter

and Jenkins, K. 2010. The effect of precipitate size on magnetic domain behaviour in grain-oreinted electrical steels. Presented at: 11th Joint MMM-INTERMAG Conference, Atlanta, USA, (BX-06)

Turner, Steven, Moses, Anthony John, Hall, Jeremy Peter

and Jenkins, Keith 2010. The effect of precipitate size on magnetic domain behavior in grain-oriented electrical steels. Journal of Applied Physics 107 (9) , 09A307. 10.1063/1.3334201

U

Ugalde Loo, Carlos Ernesto

, Acha, Enrique and Licéaga-Castro, Eduardo 2010. Comparison between series and shunt FACTS controllers using individual channel analysis and design. Presented at: 45th Universities Power Engineering Conference, Cardiff, UK, 31 August -3 September 2010. Proceedings of the 45th International Universities Power Engineering Conference (UPEC 2010), Cardiff, UK, 31 August-3 September 2010. London: Institute of Electrical and Electronics Engineers, pp. 1230-1236.

Ugalde Loo, Carlos Ernesto

, Acha, Enrique and Liceaga-Castro, Eduardo 2010. Fundamental analysis of the electromechanical oscillation damping control loop of the static VAr compensator using Individual Channel Analysis and Design. IEEE Transactions on Power Delivery 25 (4) , pp. 3053-3069. 10.1109/TPWRD.2010.2046341

Ugalde Loo, Carlos Ernesto

, Acha, Enrique, Licéaga-Castro, Eduardo and Vanfretti, Luigi 2010. Fundamental analysis of the synchronous generator – TCSC system using the ICAD framework. Presented at: 16th Power Systems Computation Conference (PSCC 2008), Glasgow, UK, Proccedings of the 16th Power Systems Computation Conference 2008 (PSCC 2008 GLASGOW), Glasgow, UK, 14-18 July 2008. , vol.1 New York: Curran Associates, pp. 711-717.

Ugalde Loo, Carlos Ernesto

, Acha, Enrique, Liceaga-Castro, Eduardo and Vanfretti, Luigi 2010. Individual channel analysis of the thyristor-controlled series compensator performance. International Journal of Emerging Electric Power Systems 11 (2) , 4. 10.2202/1553-779X.2190

Ugalde Loo, Carlos Ernesto

and Ekanayake, Janaka Bandara

2010. State-space modelling of variable-speed wind turbines: A systematic approach. Presented at: IEEE International Conference on Sustainable Energy Technologies, Kandy, Sri Lanka, 6-9 December 2010. Proceedings of the 2010 IEEE International Conference on Sustainable Energy Technologies (ICSET 2010), Kandy, Sri Lanka, 6-9 December 2010. Piscataway, NJ: IEEE, pp. 333-338. 10.1109/ICSET.2010.5684454

Umenei, Aghuinyue Esaindang. 2010. Development and application of magnetic modelling to the design of power devices. PhD Thesis, Cardiff University.

V

Valera Medina, Agustin

, Abdulsada, Mohammed H., Syred, Nicholas and Griffiths, Anthony John 2010. Studies of large coherent structures and their effects on swirl combustion. Presented at: 48th AIAA Aerospace Sciences Meeting, Orlando, FL, 4-7 January 2010. 48th AIAA Aerospace Sciences Meeting Including the New Horizons Forum and Aerospace Exposition. AIAA (2) American Institute of Aeronautics and Astronautics,

Valera Medina, Agustin

, Aboites-Dávila, Fernando, Jauregui-Correa, J. C, Syred, Nicholas and Griffiths, Anthony John 2010. Flashback Analysis in Swirlers using different geometries [Analisis del reflujo de flama en arremolinadores usando dIferentes geometrias]. Presented at: SOMIM XIV, Nuevo Leon, Mexico, 22-24 September 2010. Memorias del XVI Congreso Internacional Anual de la SOMIM. Sociedad Mexicana de Ingenieria Mecanica,

Vardon, Philip James and Thomas, Hywel Rhys

2010. Recent developments modelling THCM behaviour of geoenvironmental problems. Presented at: GeoShanghai 2010, Shanghai, China, 3-5 June 2010. Published in: He, Q. and Shen, J. S.-L. eds. Geoenvironmental Engineering and Geotechnics. Geotechnical Special Publication (204) Reston, VA: American Society of Civil Engineers, pp. 153-158. 10.1061/41105(378)22

Velkova, V., Lalev, G., Hirshy, Hassan

, Scholz, Steffen Gerhard, Hiitola-Keinänen, J., Gold, H., Haase, A., Hast, J., Stadlober, B. and Dimov, Stefan Simeonov 2010. Design and validation of a novel master-making process chain for organic and large area electronics on flexible substrates. Microelectronic Engineering 87 (11) , pp. 2139-2145. 10.1016/j.mee.2010.01.015

Vella, P. C., Brousseau, Emmanuel Bruno Jean Paul

, Minev, R. and Dimov, Stefan Simeonov 2010. A methodology for technology maturity assessment of micro and nano manufacturing processes and process chains. Presented at: 5th International Conference on Micro Manufacturing (ICOMM/4M2010), Madison, USA, pp. 327-334.

Venkatesan, S., Bhattarai, R., Osborne, M., Haddad, Abderrahmane

, Griffiths, Huw and Harid, Noureddine

2010. A case study on voltage uprating of overhead lines - air clearance requirements. Presented at: 45th International Universities Power Engineering Conference, Cardiff, UK, 31 August- 3 September 2010. 2010 45th International Universities Power Engineering Conference (UPEC 2010). London: Institute of Electrical and Electronic Engineers (IEEE), pp. 343-347.

Vidya Sagar, R., Raghu Prasad, B. K. and Karihaloo, Bhushan Lal

2010. Verification of the applicability of lattice model to concrete fracture by AE study. International Journal of Fracture 161 , pp. 121-129. 10.1007/s10704-009-9431-7

W

Wang, S., Liu, G. R., Hoang, Khac Chi and Guo, Y. 2010. Identifiable range of osseointegration of dental implants through resonance frequency analysis. Medical Engineering & Physics 32 (10) , pp. 1094-1106. 10.1016/j.medengphy.2010.07.015

Wang, X., Bockelmann-Evans, Bettina Nicole

and Falconer, Roger Alexander

2010. Numerical simulation of water quality and sediment transport in river Loughor estuary. Presented at: Proceedings of 9th International Conference on Hydroinformatics (HIC 2010), Tianjin, China, , vol.1 pp. 336-343.

Waters, Ronald T., Haddad, Abderrahmane

, Griffiths, Huw, Harid, Noureddine

and Sarkar, Partha 2010. Partial-arc and spark models of the flashover of lightly polluted insulators. IEEE Transactions on Dielectrics and Electrical Insulation (TDEI) 17 (2) , pp. 417-424. 10.1109/TDEI.2010.5448096

Watling, D., Whatling, Gemma Marie

2010. Assessment of hip, knee and ankle biomechanics during stair ascent and descent. Presented at: 9th International Conference on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Watling, Daniel, Whatling, Gemma Marie

Watling, Daniel, Whatling, Gemma Marie

and Evans, Samuel Lewin

2010. Comparison of objective classification and subjective waveform analysis for the knee during level gait. Presented at: 9th International Conference on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Wells, Peter Neil Temple

2010. Special issue on ultrasonic imaging and therapy[Guest Editorial]. Proceedings of the Institution of Mechanical Engineers. Part H Journal of Engineering in Medicine 224 (2) , i-ii. 10.1177/095441191022400201

Whatling, Gemma Marie

2010. Introducing a new staircase design to quantify healthy knee function during stair ascent and descent. Computer Methods in Biomechanics and Biomedical Engineering 13 (3) , pp. 371-378. 10.1080/10255840903251296

Whatling, Gemma Marie

2010. Are there differences in knee joint kinematics and kinetics for different stair gait cycles? Presented at: 17th Congress of the European Society of Biomechanics (ESB2010), Edinburgh, UK, 5-8 July 2010.

Whatling, Gemma Marie

2010. Does the choice of stair gait cycle affect resulting knee joint kinematics and moments? Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine 224 (9) , pp. 1085-1093. 10.1243/09544119JEIM724

Whatling, Gemma Marie

, Lovern, B., Wilson, C. and Holt, Catherine Avril

2010. Objective classificaiton of osteoarthritic, non-pathological and total knee replacement function using stair-gait functional variables. Presented at: 9th International Conference on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Whatling, Gemma Marie

, Philippe, Young, Scott, Banks, Evans, J., Wilson, Chris and Holt, Catherine Avril

2010. Comparison of knee joint kinematics using motion analysis and image registration. Presented at: 17th Congress of the European Society of Biomechanics, Edinburgh, 5-8 July 2010.

Whatling, Gemma Marie

, Wilson, C. and Holt, Catherine Avril

2010. Assessing total knee replacements and natural knee kinematics in-vivo using dynamic fluoroscopy and 3D model based matching. Presented at: Proceedings. British Orthopaedic Research Society, Cardiff, UK,

Whatling, Gemma Marie

, Wilson, C. and Holt, Catherine Avril

2010. Kinematic assessment of total knee replacements and natural knees using dynamic fluoroscopy and 3D model registration. Presented at: 9th International Conference on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain,

Whatling, Gemma Marie

, Wilson, C. and Holt, Catherine Avril

2010. Using objective classification and stair-gait to characterise knee osteoarthritis and monitor functional recovery following a total knee replacement. Presented at: Proceedings. British Orthopaedic Research Society, Cardiff, UK,

Whatling, Gemma Marie

, Wilson, Christopher and Holt, Catherine Avril

2010. Assessing total knee replacements and natural knee kinematics in-vivo using dynamic fluoroscopy and 3D model based matching. Presented at: British Orthopaedic Research Society Annual Meeting, Cardiff, 12-13 July 2010.

Whatling, Gemma Marie

, Wilson, Christopher and Holt, Catherine Avril

2010. Kinematic assessment of total knee replacements and natural knees using dynamic fluoroscopy and 3D model registration. Presented at: 9th International Symposium on Computer Methods in Biomechanics and Biomedical Engineering, Valencia, Spain, 24-27 February 2010.

Whitehouse, M. R. and Evans, Samuel Lewin

2010. Bone cement: An overview. International Journal of Nano and Biomaterials 3 (1) , pp. 4-19. 10.1504/IJNBM.2010.036104

Williams, Frederic Ward and Kennedy, David

2010. Historic, Recent and Ongoing Applications of the Wittrick-Williams Algorithm. Computational Technology Reviews 2 , pp. 223-246. 10.4203/ctr.2.10

Willis, Miles, Masters, Ian, Thomas, Sara, Gallie, Rebecca, Loman, Jo, Cook, Andy, Ahmadian, Reza

, Lin, BinLiang

, Gao, Guanghai, Cross, Mark, Croft, Nick, Williams, Alison, Muhasilovic, Medzid, Horsfall, Ian, Fidler, Rob, Wooldridge, Christopher Frederick, Fryett, Ian Alastair, Evans, Paul Stephen

, O'Doherty, Timothy

, O'Doherty, Daphne Maria and Mason-Jones, Allan

2010. Tidal turbine deployment in the Bristol Channel: a case study. Proceedings of the Institution of Civil Engineers - Energy 163 (3) , pp. 93-105. 10.1680/ener.2010.163.3.93

Wilson, Catherine

, Xavier, P. A., Schoneboom, T., Lammeranner, W., Rauch, H-P., Aberle, J., Weissteiner, C. and Thomas, H. 2010. The Hydrodynamic Drag of Full Scale Trees. Presented at: 5th International Conference on Fluvial Hydraulics (RiverFlow 2010), Braunschweig, Germany,

Witlox, Henk W. M., Harper, Mike, Oke, Adeyemi, Bowen, Philip John

, Kay, Peter John and

2010. Sub-cooled and flashing liquid jets and droplet dispersion I. Overview and model implementation/validation. Journal of Loss Prevention in the Process Industries 23 (6) , pp. 831-842. 10.1016/j.jlp.2010.07.004

Woodington, Simon Philip, Saini, Randeep, Williams, D., Lees, Jonathan

2010. Behavioral model analysis of active harmonic load-pull measurements. Presented at: IEEE MTT-S International Microwave Symposium, Anaheim, CA, USA, 23-28 May 2010. Microwave Symposium Digest (MTT), 2010 IEEE MTT-S International. New York: IEEE, pp. 1688-1691. 10.1109/MWSYM.2010.5517261

Wright, Patricia, Soroka, Anthony John

and Belt, Steven 2010. Audio changes how older people follow animated instructions [Abstract]. Gerontechnology 9 (2) , p. 340. 10.4017/gt.2010.09.02.191.00

Wright, Patricia, Soroka, Anthony John

, Belt, Steven, Pham, Duc Truong, Dimov, Stefan, De Roure, David and Petrie, Helen 2010. Using audio to support animated route information in a hospital touch-screen kiosk. Computers in Human Behavior 26 (4) , pp. 753-759. 10.1016/j.chb.2010.01.012

Wright, Peter 2010. Development of novel design methodologies for the efficiency enhancement of RF power amplifiers in wireless communications. PhD Thesis, Cardiff University.

Wu, Lufang 2010. Serviceability assessments of masonry arch bridges. PhD Thesis, Cardiff University.

Wu, Zhang Ming

, Wright, Mike T. and Ma, Xianghong 2010. The experimental evaluation of the dynamics of fluid-loaded microplates. Journal of Micromechanics and Microengineering 20 (7) , 075034. 10.1088/0960-1317/20/7/075034

X

Xavier, P. A., Wilson, Catherine

, Aberle, J., Rauch, H. P., Schoneboom, T., Lammeranner, W., Weissteiner, C. and Thomas, H. 2010. Drag Force of Flexible Submerged Trees. Presented at: Proceedings of the EU Hydralab Conference, Hannover, Germany,

Xia, J., Falconer, Roger Alexander

, Lin, BinLiang

and Wang, G. 2010. Numerical assessment of people and vehicle safety in flash floods. Presented at: 1st European IAHR Congress, Edinburgh, UK, 4-6 May 2010. Published in: Arthur, S. ed. Proceedings of 1st European IAHR Congress. Edinburgh: Heriot Watt University Press, pp. 1-6.

Xia, Junqiang, Falconer, Roger Alexander

and Lin, BinLiang

2010. Hydrodynamic impact of a tidal barrage in the Severn Estuary, UK. Renewable Energy 35 (7) , pp. 1455-1468. 10.1016/j.renene.2009.12.009

Xia, Junqiang, Falconer, Roger Alexander

and Lin, BinLiang

2010. Impact of different operating modes for a Severn Barrage on the tidal power and flood inundation in the Severn Estuary, UK. Applied Energy 87 (7) , pp. 2374-2391. 10.1016/j.apenergy.2009.11.024

Xia, Junqiang, Falconer, Roger Alexander

and Lin, BinLiang

2010. Impact of different tidal renewable energy projects on the hydrodynamic processes in the Severn Estuary, UK. Ocean Modelling 32 (1-2) , pp. 86-104. 10.1016/j.ocemod.2009.11.002

Xia, Junqiang, Falconer, Roger Alexander

and Lin, BinLiang

2010. Numerical model assessment of tidal stream energy resources in the Severn Estuary, UK. Proceedings of the Institution of Mechanical Engineers, Part A: Power and Energy 224 (7) , pp. 969-983. 10.1243/09576509JPE938

Xia, Junqiang, Falconer, Roger Alexander

and Lin, BinLiang

2010. The Severn Barrage: impact of future coastal flood risk in the estuary. Presented at: Proceedings of 1st European IAHR Congress, Edinburgh, UK, Heriot Watt University Press, pp. 1-6.

Xia, Junqiang, Falconer, Roger Alexander

, Lin, BinLiang

and Tan, Guangming 2010. Modelling flood routing on initially dry beds with the refined treatment of wetting and drying. International Journal of River Basin Management 8 (3-4) , pp. 225-243. 10.1080/15715124.2010.502121

Xia, Junqiang and Lin, BinLiang

2010. Severn Barrage and other tidal energy options: Environmental hydraulics studies. Presented at: Proceedings of 6th International Symposium on Environmental Hydraulics, Athens, Greece, , vol.1 pp. 13-26.

Xia, Junqiang, Lin, BinLiang

and Wang, G. 2010. Modelling dam-break flows over mobile beds using a 2D coupled approach. Advances in Water Resources 33 (2) , pp. 171-183. 10.1016/j.advwatres.2009.11.004

Xiao, Q. Z. and Karihaloo, Bhushan Lal

2010. Two-scale asymptotic homogeniSation-based finite element analysis of composite materials. Aliabadi, F. M. H. and Galvenetto, U., eds. Multiscale Modeling in Solid Mechanics: Computational Approaches, Computational and Experimental Methods in Structures, vol. 3. London: Imperial College Press, pp. 43-100.

Xiao, Zhaoxia, Wu, Jianzhong