Browse by Schools (by year)

and Bockelmann-Evans, Bettina Nicole

2014. Comparison of hydro-environmental impacts for ebb-only and two-way generation for a Severn Barrage. Computers & Geosciences 71 , pp. 11-19. 10.1016/j.cageo.2014.05.006

Ahmadian, Reza

, Olbert, Agnieszka I., Hartnett, Michael and Falconer, Roger Alexander

2014. Sea level rise in the Severn Estuary and Bristol Channel and impacts of a Severn Barrage. Computers & Geosciences 66 , pp. 94-105. 10.1016/j.cageo.2013.12.011

Akmar, A. B. Ilyani, Lahmer, T., Bordas, Stephane Pierre Alain

, Beex, L. A. A. and Rabczuk, T. 2014. Uncertainty quantification of dry woven fabrics: A sensitivity analysis on material properties. Composite Structures 116 , pp. 1-17. 10.1016/j.compstruct.2014.04.014

Al Qahtany, Ali, Rezgui, Yacine

and Li, Haijiang

2014. A consensus-based framework for the sustainable urban planning development: 'As an approach for Saudi Arabian cities'. International Journal of Environmental Science and Development 5 (2) , pp. 124-131. 10.7763/IJESD.2014.V5.463

Al-Moadhen, Ahmed, Packianather, Michael Sylvester

, Setchi, Rossi and Qiu, Renxi 2014. Automation in handling uncertainty in semantic-knowledge based robotic task-planning by using markov logic networks. Procedia Computer Science 35 (C) , pp. 1023-1032. 10.1016/j.procs.2014.08.188

Al-Shrafany, Deleen, Rico-Ramirez, Miguel A., Han, Dawei and Bray, Michaela

2014. Comparative assessment of soil moisture estimation from land surface model and satellite remote sensing based on catchment water balance. Meteorological Applications 21 (3) , pp. 521-534. 10.1002/met.1357

Alaei, Parham, Spezi, Emiliano

and Reynolds, Margaret 2014. Dose calculation and treatment plan optimization including imaging dose from kilovoltage cone beam computed tomography. Acta Oncologica 53 (6) , pp. 839-844. 10.3109/0284186X.2013.875626

Albano, M.

, Charalampidis, P., Waters, R. T., Griffiths, H. and Haddad, A.

2014. Silicone rubber insulators for polluted environments part 2: textured insulators. IEEE Transactions on Dielectrics and Electrical Insulation 21 (2) , pp. 749-757. 10.1109/TDEI.2013.004016

Aldossary, Naief, Rezgui, Yacine

and Kwan, Alan Shu Khen

2014. Domestic energy consumption patterns in a hot and arid climate: A multiple-case study analysis. Renewable Energy 62 , pp. 369-378. 10.1016/j.renene.2013.07.042

Aldossary, Naief, Rezgui, Yacine

and Kwan, Alan Shu Khen

2014. Domestic energy consumption patterns in a hot and humid climate: A multiple-case study analysis. Applied Energy 114 , pp. 353-365. 10.1016/j.apenergy.2013.09.061

Amiri, F., Anitescu, C., Arroyo, M., Bordas, Stephane Pierre Alain

and Rabczuk, T. 2014. XLME interpolants, a seamless bridge between XFEM and enriched meshless methods. Computational Mechanics 53 (1) , pp. 45-57. 10.1007/s00466-013-0891-2

Angeloudis, Athanasios

, Kim, Dongjin and Stoesser, Thorsten

2014. Modelling of flow, transport and disinfection kinetics in contact tanks. Proceedings of the ICE - Water Management 167 (9) , pp. 532-546. 10.1680/wama.13.00045

Angeloudis, Athanasios

, Stoesser, Thorsten

2014. Predicting the disinfection efficiency range in chlorine contact tanks through a cfd-based approach. Water Research 60 , pp. 118-129. 10.1016/j.watres.2014.04.037

Anyebe, E. A.

and Zhuang, Q. 2014. Self-catalysed InAs 1-x Sb x nanowires grown directly on bare Si substrates. Materials Research Bulletin 60 , pp. 572-575. 10.1016/j.materresbull.2014.09.028

Anyebe, E. A.

, Zhuang, Q., Kesaria, M.

and Krier, A. 2014. The structural evolution of InN nanorods to microstructures on Si (111) by molecular beam epitaxy. Semiconductor Science and Technology 29 (8) , 085010. 10.1088/0268-1242/29/8/085010

Anyebe, E. A.

, Zhuang, Q., Sanchez, A. M., Lawson, S., Robson, A. J., Ponomarenko, L., Zhukov, A. and Kolosov, O. 2014. Self-catalysed growth of InAs nanowires on bare Si substrates by droplet epitaxy. physica status solidi (RRL) - Rapid Research Letters 8 (7) , pp. 658-662. 10.1002/pssr.201409106

Arastehfar, Soheil, Liu, Ying

and Lu, Wen Feng 2014. A framework for concept validation in product design using digital prototyping. Journal of Industrial and Production Engineering 31 (5) , pp. 286-302. 10.1080/21681015.2014.951407

Ashby, Shane, Thomas, Jason A., Garcia Canadas, Jorge, Gao, Min

, Corps, Jack, Powell, Anthony V., Xu, Hualong, Shen, Wei and Chao, Yimin 2014. FD 176: Bridging Silicon Nanoparticles and Thermoelectrics: Phenylacetylene Functionalization. Faraday Discussions 176 , pp. 349-361. 10.1039/c4fd00109e

Ashton, Thomas E., Laveda, Josefa Vidal, MacLaren, Donald A., Baker, Peter J., Porch, Adrian

, Jones, Martin O. and Corr, Serena A. 2014. Muon studies of Li+ diffusion in LiFePO4 nanoparticles of different polymorphs. Journal of Materials Chemistry A 2 (17) , pp. 6238-6245. 10.1039/c4ta00543k

Bacigalupo, A., Morini, Lorenzo

and Piccolroaz, A. 2014. Effective elastic properties of planar SOFCs: a non-local dynamic homogenization approach. International Journal of Hydrogen Energy 39 (27) , pp. 15017-15030. 10.1016/j.ijhydene.2014.06.104

Baej, Hesham, Valera Medina, Agustin

, Bowen, Philip

, Syred, Nicholas, O'Doherty, Timothy

2014. Impacts on blowoff by a Variety of CRZs using various gases for gas turbines. Energy Procedia 61 , pp. 1606-1609. 10.1016/j.egypro.2014.12.301

Bagdanavicius, Audrius and Jenkins, Nicholas

2014. Exergy and exergoeconomic analysis of a Compressed Air Energy Storage combined with a district energy system. Energy Conversion and Management 77 , pp. 432-440. 10.1016/j.enconman.2013.09.063

Bagni, O., Spezi, Emiliano

, Patterson, N., Filippi, L., D'Arienzo, M., Chiaramida, P. and Scopinaro, F. 2014. A workflow for treatment evaluation of 90Y microspheres SIRT therapy of hepatic lesions based on FDG-PET and Y90-PET. European Journal of Nuclear Medicine and Molecular Imaging 41 , S255-S255.

Baille, Wiebke, Tripathy, Snehasis

and Schanz, Tom 2014. Effective stress in clays of various mineralogy. Vadose Zone Journal 13 (5) 10.2136/vzj2013.06.0112

Banerjee, J. R. and Kennedy, D.

2014. Dynamic stiffness method for inplane free vibration of rotating beams including Coriolis effects. Journal of Sound and Vibration 333 (26) , pp. 7299-7312. 10.1016/j.jsv.2014.08.019

Banitalebi Dehkordi, Maryam

, Frisoli, Antonio, Sotgiu, Edoardo and Loconsole, Claudio 2014. Pedestrian indoor navigation system using inertial measurement unit. International Journal of Sensor Networks and Data Communications 3 (1) , 1000115. 10.4172/2090-4886.1000115

Barannik, A. A., Cherpak, N. T., Kharchenko, M. S., Wu, Yun, Luo, Sheng, He, Yusheng and Porch, Adrian

2014. Unusual microwave response and bulk conductivity of very thin FeSe0.3Te0.7 films as a function of temperature. Low Temperature Physics 40 (6) , p. 492. 10.1063/1.4881178

Baruah, Pranab J., Blainey, Simon, Eyre, Nicholas, Tran, Martino, Chaudry, Modassar

, Qadrdan, Meysam

and Hall, Jim W. 2014. Energy system impacts from heat and transport electrification. Proceedings of the Institution of Civil Engineers - Energy 167 (3) , pp. 139-151. 10.1680/ener.14.00008

Beex, L. A. A.

, Kerfriden, P.

, Rabczuk, T. and Bordas, S. P. A. 2014. Quasicontinuum-based multiscale approaches for plate-like beam lattices experiencing in-plane and out-of-plane deformation. Computer Methods in Applied Mechanics and Engineering 279 , pp. 348-378. 10.1016/j.cma.2014.06.018

Beex, Lars

, Peerlings, R. H. J. and Geers, M. G. D. 2014. A multiscale quasicontinuum method for dissipative lattice models and discrete networks. Journal of the Mechanics and Physics of Solids 64 , pp. 154-169. 10.1016/j.jmps.2013.11.010

Beex, Lars

, Peerlings, R. H. J. and Geers, M. G. D. 2014. A multiscale quasicontinuum method for lattice models with bond failure and fiber sliding. Computer Methods in Applied Mechanics and Engineering 269 , pp. 108-122. 10.1016/j.cma.2013.10.027

Bennett, Daniel, Cuss, R. J., Vardon, P. J., Harrington, J. F. and Thomas, Hywel Rhys

2014. Phenomena exposure from the large scale gas injection test (Lasgit) dataset using a bespoke data analysis toolkit. Geological Society Special Publication 400 (1) , pp. 497-505. 10.1144/SP400.5

Berthon, B., Haggstrom, I., Apte, A., Beattie, B., Kirov, A., Humm, J., Marshall, C., Spezi, Emiliano

, Larsson, A. and Schmidtlein, C. 2014. A fast positron emission tomography simulator for synthetic lesion smulation. European Journal of Nuclear Medicine and Molecular Imaging 41 , S367-S367.

Berthon, B., Marshall, C., Evans, M. and Spezi, Emiliano

2014. Evaluation of advanced automatic PET segmentation methods using nonspherical thin-wall inserts. Medical Physics 41 , 022502. 10.1118/1.4863480

Berthon, B., Marshall, C. and Spezi, Emiliano

2014. A predictive model for optimal segmentation of PET images. European Journal of Nuclear Medicine and Molecular Imaging 41 , S172-S172.

Berthon, B., Rackley, T., Marshall, C., Evans, M., Palaniappan, N., Cole, N., Jayaprakasam, V., Symonds, I., Penketh, L. and Spezi, Emiliano

2014. Intensity modulated radiotherapy treatment of head and neck cancer patients using PET auto-segmentation to delineate primary tumour. European Journal of Nuclear Medicine and Molecular Imaging 41 , S196-S197.

Bomphrey, J. J., Jarvis, D. J. and Gao, Min

2014. The effects upon particle size and morphology of thermoelectric nanopowders prepared by high intensity ultrasonic milling. Materials Research Express 1 (1) , 015502. 10.1088/2053-1591/1/1/015502

Borodich, Feodor M.

, Galanov, Boris A., Keer, Leon M. and Suarez-Alvarez, Maria M. 2014. The JKR-type adhesive contact problems for transversely isotropic elastic solids. Mechanics of Materials 75 , pp. 34-44. 10.1016/j.mechmat.2014.03.011

Borodich, Feodor M.

, Galanov, Boris A. and Suarez-Alvarez, Maria M. 2014. The JKR-type adhesive contact problems for power-law shaped axisymmetric punches. Journal of the Mechanics and Physics of Solids 68 , pp. 14-32. 10.1016/j.jmps.2014.03.003

Borowiec, M., Rysak, A., Betts, D. N., Bowen, C. R., Kim, Alicia

and Litak, G. 2014. Complex response of a bistable laminated plate: multiscale entropy analysis. The European Physical Journal Plus 129 (10) , 211. 10.1140/epjp/i2014-14211-3

Borrell, Amparo, Salvador, María Dolores, Garcia Rocha, Victoria

, Fernández, Adolfo, Gómez, Andrés, López-López, Emilio and Moreno, Rodrigo 2014. ZrTiO4 materials obtained by spark plasma reaction-sintering. Composites: Part B Engineering 56 , pp. 330-335. 10.1016/j.compositesb.2013.08.046

Bortot, Eliana, Denzer, Ralf, Menzel, Andreas and Gei, Massimiliano

2014. Analysis of a viscous soft dielectric elastomer generator operating in an electrical circuit. PAMM 14 (1) , pp. 511-512. 10.1002/pamm.201410243

Bortot, Eliana, Springhetti, Roberta and Gei, Massimiliano

2014. Enhanced soft dielectric composite generators: the role of ceramic fillers. Journal of the European Ceramic Society 34 (11) , pp. 2623-2632. 10.1016/j.jeurceramsoc.2013.12.014

Bosi, F., Piccolroaz, A., Gei, Massimiliano

, Dal Corso, E., Cocquio, A. and Bigoni, D. 2014. Experimental investigation of the elastoplastic response of aluminum silicate spray dried powder during cold compaction. Journal of the European Ceramic Society 34 (11) , pp. 2633-2642. 10.1016/j.jeurceramsoc.2013.11.037

Bowen, C. R., Betts, D. N., Kim, Alicia

and Topolov, V. Yu. 2014. 2–2 composites based on [011]-poled relaxor-ferroelectric single crystals: analysis of the piezoelectric anisotropy and squared figures of merit for energy harvesting applications [Technical Paper]. Microsystem Technologies 20 (4) , pp. 709-717. 10.1007/s00542-013-2012-8

Bowen, C. R., Kim, Alicia

, Weaver, P. M. and Dunn, S. 2014. Piezoelectric and ferroelectric materials and structures for energy harvesting applications. Energy & Environmental Science 7 (1) , pp. 25-44. 10.1039/C3EE42454E

Bowen, C. R., Taylor, J., LeBoulbar, E., Zabek, D.

, Chauhan, A. and Vaish, R. 2014. Pyroelectric materials and devices for energy harvesting applications. Energy and Environmental Science 7 (12) , pp. 3836-3856. 10.1039/C4EE01759E

Bowen, C. R., Watson, M., Betts, D. N., Harris, P., Bertin, M. and Kim, Alicia

2014. Piezoelectric fibres integrated into structural composites. Ferroelectrics 466 (1) , pp. 14-20. 10.1080/00150193.2014.894842

Brammer, James, Falconer, Roger Alexander

, Ellis, Christopher and Ahmadian, Reza

2014. Physical and numerical modelling of the Severn Barrage. Science China Technological Sciences 57 (8) , pp. 1471-1481. 10.1007/s11431-014-5602-5

Brigstocke, G. H. O., Hearnden, A., Holt, Catherine Avril

and Whatling, Gemma Marie

2014. In-vivo confirmation of the use of the dart thrower's motion during activities of daily living. Journal of Hand Surgery: European Volume 39 (4) , pp. 373-378. 10.1177/1753193412460149

Bruder, Brittany, Bomminayuni, Sandeep Kumar, Haas, Kevin and Stoesser, Thorsten

2014. Modeling tidal distortion in the Ogeechee Estuary. Ocean Modelling 82 , pp. 60-69. 10.1016/j.ocemod.2014.08.004

Budarapu, Pattabhi R., Gracie, Robert, Bordas, Stephane Pierre Alain

and Rabczuk, Timon 2014. An adaptive multiscale method for quasi-static crack growth. Computational Mechanics 53 (6) , pp. 1129-1148. 10.1007/s00466-013-0952-6

Cahill, L. M. A., Natarajan, S., Bordas, Stephane Pierre Alain

, O'Higgins, R. M. and McCarthy, C. T. 2014. An experimental/numerical investigation into the main driving force for crack propagation in uni-directional fibre-reinforced composite laminae. Composite Structures 107 , pp. 119-130. 10.1016/j.compstruct.2013.05.039

Camarchia, Vittorio, Chiolerio, Alessandro, Cotto, Marco, Fang, Jie, Ghione, Giovanni, Pandolfi, Paolo, Pirola, Marco, Quaglia, Roberto

and Ramella, Chiara 2014. Demonstration of inkjet-printed silver nanoparticle microstrip lines on alumina for RF power modules. Organic Electronics 15 (1) , pp. 91-98. 10.1016/j.orgel.2013.10.018

Canning, Tim, Powell, Jeff R. and Cripps, Steve C.

2014. Optimal design of broadband microwave baluns using single-layer planar circuit technology. IEEE Transactions on Microwave Theory and Techniques 62 (5) , pp. 1183-1191. 10.1109/TMTT.2014.2311417

Canning, Timothy A. J., Tasker, Paul J.

and Cripps, Steven Charles

2014. Continuous mode power amplifier design using harmonic clipping contours: theory and practice. IEEE Transactions on Microwave Theory and Techniques 62 (1) , pp. 100-110. 10.1109/TMTT.2013.2292675

Cernescu, Anghel

, Remes, Heikki, Lehto, Pauli and Romanoff, Jani 2014. Fatigue crack growth rate in laser-welded web core sandwich panels - fatigue crack propagation in welded base metal. Advanced Materials Research 891-89 , pp. 1212-1216. 10.4028/www.scientific.net/AMR.891-892.1212

Charalampidis, P., Albano, Maurizio

, Griffiths, Huw, Haddad, Abderrahmane

and Waters, Ronald T. 2014. Silicone rubber insulators for polluted environments part 1: enhanced artificial pollution tests. IEEE Transactions on Dielectrics and Electrical Insulation 21 (2) , pp. 740-748. 10.1109/TDEI.2013.004015

Chaudry, Modassar

, Qadrdan, Meysam

and Wu, Jianzhong

2014. Combined gas and electricity network expansion planning. Applied Energy 113 , pp. 1171-1187. 10.1016/j.apenergy.2013.08.071

Chen, Ren-peng, Chen, Jin-miao and Wang, Hanlin 2014. Recent research on the track-subgrade of high-speed railways. Journal of Zhejiang University Science A 15 , pp. 1034-1038. 10.1631/jzus.A1400342

Chen, Lei, Nguyen-Thanh, Nhon, Nguyen-Xuan, Hung, Rabczuk, Timon, Bordas, Stephane

and Limbert, Georges 2014. Explicit finite deformation analysis of isogeometric membranes. Computer Methods in Applied Mechanics and Engineering 277 , pp. 104-130. 10.1016/j.cma.2014.04.015

Chen, Yunmin, Wang, Hanlin, Chen, Renpeng and Chen, Yun 2014. A newly designed TDR probe for soils with high electrical conductivities. Geotechnical Testing Journal 37 (1) , pp. 36-45. 10.1520/GTJ20120227

Cheng, Zhiguang, Norio, Takahashi, Forghani, Behzad, Moses, Anthony John, Anderson, Philip Ian

, Fan, Yana, Liu, Tao, Wang, Xiaoyan, Zhao, Zhigang and Liu, Lanrong 2014. Modeling of magnetic properties of GO electrical steel based on Epstein combination and loss data weighted processing. IEEE Transactions on Magnetics 50 (1) , 6300209. 10.1109/TMAG.2013.2279840

Chiolerio, Alessandro, Camarchia, Vittorio, Quaglia, Roberto

, Pirola, Marco, Pandolfi, Paolo and Pirri, Candido Fabrizio 2014. Hybrid Ag-based inks for nanocomposite inkjet printed lines: RF properties. Journal of Alloys and Compounds 615 (Supp 1) , S501-S504. 10.1016/j.jallcom.2013.12.174

Clark, D.

, Guo, Dongsheng, Lathi, D., Harid, N.

, Griffiths, H., Ainsley, Alan and Haddad, A.

2014. Controlled large-scale tests of practical grounding electrodes--part II: comparison of analytical and numerical predictions with experimental results. IEEE Transactions on Power Delivery 29 (3) , pp. 1240-1248. 10.1109/TPWRD.2014.2298358

Coburn, Broderick H., Wu, Zhang Ming

and Weaver, Paul M. 2014. Buckling analysis of stiffened variable angle tow panels. Composite Structures 111 , pp. 259-270. 10.1016/j.compstruct.2013.12.029

Colquitt, D. J., Brun, M., Gei, M.

, Movchan, A. B., Movchan, N. V. and Jones, I. S. 2014. Transformation elastodynamics and cloaking for flexural waves. Journal of the Mechanics and Physics of Solids 72 , pp. 131-143. 10.1016/j.jmps.2014.07.014

Connor, Peter M., Baker, Philip E., Xenias, Dimitrios

, Balta-Ozkan, Nazmiye, Axon, Colin J. and Cipcigan, Liana

2014. Policy and regulation for smart grids in the United Kingdom. Renewable and Sustainable Energy Reviews 40 , pp. 269-286. 10.1016/j.rser.2014.07.065

Courtecuisse, Hadrien, Allard, Jérémie, Kerfriden, Pierre

, Bordas, Stephane

, Cotin, Stéphane and Duriez, Christian 2014. Real-time simulation of contact and cutting of heterogeneous soft-tissues. Medical Image Analysis 18 (2) , pp. 394-410. 10.1016/j.media.2013.11.001

Cowle, Matthew, Babatunde, Akintunde, Rauen, W. B., Bockelmann-Evans, Bettina Nicole

and Barton, A. F. 2014. Biofilm development in water distribution and drainage systems: dynamics and implications for hydraulic efficiency. Environmental Technology Reviews 3 (1) , pp. 31-47. 10.1080/09593330.2014.923517

Crivelli, Davide

, Eaton, Mark

, Pearson, Matthew R.

and Pullin, Rhys

2014. Chebyshev descriptors for SHM with acoustic emission and acousto ultrasonics. International Journal of Structural Integrity 5 (3) , pp. 202-213. 10.1108/IJSI-04-2014-0013

Crivelli, Davide

, Guagliano, Mario and Monici, Alberto 2014. Development of an artificial neural network processing technique for the analysis of damage evolution in pultruded composites with acoustic emission. Composites: Part B Engineering 56 , pp. 948-959. 10.1016/j.compositesb.2013.09.005

D'Arienzo, M., Cozzella, L., Spezi, Emiliano

, Patterson, N., Chiaramida, P., Ruzza, A., Parascandolo, A., Filippi, L. and Bagni, O. 2014. 90Y-PET imaging after liver radioembolization: from PET calibration to absorbed dose determination using a Monte Carlo approach. European Journal of Nuclear Medicine and Molecular Imaging 41 , S331-S331.

Damghani, Mahdi, Kennedy, David

and Featherston, Carol

2014. Global buckling of composite plates containing rectangular delaminations using exact stiffness analysis and smearing method. Computers and Structures 134 , pp. 32-47. 10.1016/j.compstruc.2013.12.005

Davies, Alan, Thomas, A. J. and John, Elwyn Graham 2014. Minimising transportation in manufacturing supply chains. International Journal of Sustainable Engineering 7 (2) , pp. 144-153. 10.1080/19397038.2013.801531

Deeb, R., Kulasegaram, S.

and Karihaloo, B. L.

2014. 3D modelling of the flow of self-compacting concrete with or without steel fibres. Part I: slump flow test. Computational Particle Mechanics 1 (4) , pp. 373-389. 10.1007/s40571-014-0002-y

Deeb, R., Kulasegaram, S.

and Karihaloo, B. L.

2014. 3D modelling of the flow of self-compacting concrete with or without steel fibres. Part II: L-box test and the assessment of fibre reorientation during the flow. Computational Particle Mechanics 1 (4) , pp. 391-408. 10.1007/s40571-014-0003-x

Deeb, Rola, Karihaloo, Bhushan L.

and Kulasegaram, Sivakumar

2014. Reorientation of short steel fibres during the flow of self-compacting concrete mix and determination of the fibre orientation factor. Cement and Concrete Research 56 , pp. 112-120. 10.1016/j.cemconres.2013.10.002

Del Gado, E., Ioannidou, K., Masoero, E., Baronnet, A., Pellenq, R. J. -M., Ulm, F. -J. and Yip, S. 2014. A soft matter in construction - Statistical physics approach to formation and mechanics of C-S-H gels in cement. European Physical Journal - Special Topics 223 (11) , pp. 2285-2295. 10.1140/epjst/e2014-02264-1

Dietrich, Markus, Rauch, Dieter, Porch, Adrian

and Moos, Ralf 2014. A laboratory test setup for in situ measurements of the dielectric properties of catalyst powder samples under reaction conditions by microwave cavity perturbation: set up and initial tests. Sensors 14 (9) , pp. 16856-16868. 10.3390/s140916856

Dominguez-Garcia, Jose Luis, Ugalde Loo, Carlos Ernesto

, Gomis-Bellmunt, Oriol and Bianchi, Fernando D. 2014. Input-output signal selection for damping of power system oscillations using wind power plants. International Journal of Electrical Power and Energy Systems 58 , pp. 75-84. 10.1016/j.ijepes.2014.01.001

Dong, H., Wang, J. and Karihaloo, B. L.

2014. An improved Puck's failure theory for fibre-reinforced composite laminates including the in situ strength effect. Composites Science and Technology 98 , pp. 86-92. 10.1016/j.compscitech.2014.04.009

Drysdale, Brian, Wu, Jianzhong

2014. Flexible demand in the GB domestic electricity sector in 2030. Applied Energy 10.1016/j.apenergy.2014.11.013

Du, Yan-Jun, Jiang, Ning-Jun, Liu, Song-Yu, Jin, Fei

, Singh, Devendra Narain and Puppala, Anand J. 2014. Engineering properties and microstructural characteristics of cement-stabilized zinc-contaminated kaolin. Canadian Geotechnical Journal 51 (3) , pp. 298-302. 10.1139/cgj-2013-0177

Du, Yan-Jun, Wei, Ming-Li, Reddy, Krishna R. and Jin, Fei

2014. Compressibility of cement-stabilized zinc-contaminated high plasticity clay. Natural Hazards 73 (2) , pp. 671-683. 10.1007/s11069-014-1098-3

Du, Yan-Jun, Wei, Ming-Li, Reddy, Krishna R., Jin, Fei

, Wu, Hao-Liang and Liu, Zhi-Bin 2014. New phosphate-based binder for stabilization of soils contaminated with heavy metals: Leaching, strength and microstructure characterization. Journal of Environmental Management 146 , pp. 179-188. 10.1016/j.jenvman.2014.07.035

Du, Yan-Jun, Wei, Ming-Li, Reddy, Krishna R., Liu, Zhao-Peng and Jin, Fei

2014. Effect of acid rain pH on leaching behavior of cement stabilized lead-contaminated soil. Journal of Hazardous Materials 271 , pp. 131-140. 10.1016/j.jhazmat.2014.02.002

Dunning, Peter D., Stanford, Bret K., Kim, Alicia

and Jutte, Christine V. 2014. Aeroelastic tailoring of a plate wing with functionally graded materials. Journal of Fluids and Structures 51 , pp. 292-312. 10.1016/j.jfluidstructs.2014.09.008

El-Mghairbi, A, Griffiths, Huw, Harid, N and Haddad, Abderrahmane

2014. Comparative assessment of enhancements to wind turbine earthing systems. IEEJ Transactions on Power and Energy 134 (7) , pp. 562-567. 10.1541/ieejpes.134.562

Elderrat, Haithem, Davies, Huw Charles

2014. Investigation of the foam filled fluid technology for anti-vibration devices. International Journal of Structural Analysis & Design 1 (3) , pp. 182-187.

Elkaseer, Ahmed

2014. Modeling the surface generation process during AFM probe-based machining: simulation and experimental validation. Surface Topography: Metrology and Properties 2 (2) , 025001. 10.1088/2051-672X/2/2/025001

Esfahanian, Vahid, Baghapour, Behzad, Torabzadeh, Mohammad and Chizari, Hossain

2014. An efficient GPU implementation of cyclic reduction solver for high-order compressible viscous flow simulations. Computers and Fluids 92 , pp. 160-171. 10.1016/j.compfluid.2013.12.011

Esfahanian, Vahid, Dehghan, Ali Akbar, Khoshab, Masih and Chizari, Hossain

2014. Direct numerical simulation of controlled transition scenarios on a flat plate. Modares Mechanical Engineering 15 (3) , pp. 353-364.

Evans, Samuel, Baylis, Sonya, Carabott, Romina, Jones, Michael David

, Kelson, Zoe, Marsh, Nicholas, Payne-James, Jason, Ramadani, Jona, Vanezis, Peter and Kemp, Alison Mary

2014. Guidelines for photography of cutaneous marks and injuries: a multi-professional perspective. Journal of Visual Communication in Medicine 37 (1-2) , pp. 3-12. 10.3109/17453054.2014.911152

Evans, Samuel, Baylis, Sonya, Carabott, Romina, Jones, Michael David

, Lawson, Zoe, Marsh, Nick, Payne-James, Jason, Ramadani, Jona, Vanezis, Peter and Kemp, Alison Mary

2014. Focussing on the future: Survey results on the image capture of patterned cutaneous injuries. Journal of Forensic and Legal Medicine 24 , pp. 7-11. 10.1016/j.jflm.2014.02.007

Fahmy, Ashraf and Abdel Ghany, Abdel Ghany Mohamed 2014. Adaptive functional-based neuro-fuzzy-PID incremental controller structure. Indonesian Journal of Electrical Engineering and Informatics (IJEEI) 2 (1) , Fahmy. 10.11591/ijeei.v2i1.99

Fairley, I., Ahmadian, Reza

, Willis, M R. and Masters, I. 2014. The effects of a Severn Barrage on wave conditions in the Bristol Channel. Renewable Energy 68 , pp. 428-442. 10.1016/j.renene.2014.02.023

Farsadnia, F., Rostami Kamrood, M., Moghaddam Nia, A., Modarres, R., Bray, Michaela

, Han, D. and Sadatinejad, J. 2014. Identification of homogeneous regions for regionalization of watersheds by two-level self-organizing feature maps. Journal of Hydrology 509 , pp. 387-397. 10.1016/j.jhydrol.2013.11.050

Fazeli, Meghdad, Ekanayake, Janaka Bandara

, Holland, Paul M. and Igic, Petar 2014. Exploiting PV inverters to support local voltage-A small-signal model. IEEE Transactions on Energy Conversion Ec 29 (2) , pp. 453-462. 10.1109/TEC.2014.2300012

Ferguson, Thomas Ian, Emery, Sophie, Price-Davies, Rebecca

and Cosslett, Allan George

2014. A review of stability issues associated with vitamins in parenteral nutrition. e-SPEN Journal 9 (2) , e49-e53. 10.1016/j.clnme.2014.01.001

Fernandez-Barciela, M., Pelaez-Perez, A. M., Woodington, S., Alonso, J. I. and Tasker, Paul J.

2014. Stretching the design: extending analytical circuit design from the linear to the nonlinear domain. IEEE Microwave Magazine 15 (6) , pp. 106-120. 10.1109/MMM.2014.2332851

Gao, Min

2014. Principle of determining thermoelectric properties based on I–V curves. Measurement Science and Technology 25 (8) , 085009. 10.1088/0957-0233/25/8/085009

Garcia Canadas, Jorge and Gao, Min

2014. Impedance spectroscopy models for the complete characterization of thermoelectric materials. Journal of Applied Physics 116 (17) , 174510. 10.1063/1.4901213

Garcia Canadas, Jorge and Gao, Min

2014. Low frequency impedance spectroscopy analysis of thermoelectric modules. Journal of Electronic Materials 43 (6) , pp. 2411-2414. 10.1007/s11664-014-3095-4

Garcia Canadas, Jorge and Min, Gao

2014. Multifunctional probes for high-throughput measurement of Seebeck coefficient and electrical conductivity at room temperature. Review of Scientific Instruments 85 , 043906.

Gardner, Diane

, Jefferson, Anthony

, Hoffman, Andrea and Lark, Robert

2014. Simulation of the capillary flow of an autonomic healing agent in discrete cracks in cementitious materials. Cement and Concrete Research 58 , pp. 35-44. 10.1016/j.cemconres.2014.01.005

Gei, Massimiliano

, Colonnelli, Stefania and Springhetti, Roberta 2014. The role of electrostriction on the stability of dielectric elastomer actuators. International Journal of Solids and Structures 51 (3-4) , pp. 848-860. 10.1016/j.ijsolstr.2013.11.011

Giamundo, V., Sarhosis, Vasilis, Lignola, G. P., Sheng, Y. and Manfredi, G. 2014. Evaluation of different computational modelling strategies for the analysis of low strength masonry structures. Engineering Structures 73 , pp. 160-169. 10.1016/j.engstruct.2014.05.007

Gill, R. T., Harbottle, Michael John

, Smith, J. W. N. and Thornton, S. F. 2014. Electrokinetic-enhanced bioremediation of organic contaminants: A review of processes and environmental applications. Chemosphere 107 , pp. 31-42. 10.1016/j.chemosphere.2014.03.019

Gonzalez Estrada, Octavio Andres, Nadal, E., Ródenas, J. J., Kerfriden, Pierre

, Bordas, Stephane Pierre Alain

and Fuenmayor, F. J. 2014. Mesh adaptivity driven by goal-oriented locally equilibrated superconvergent patch recovery. Computational Mechanics 53 (5) , pp. 957-976. 10.1007/s00466-013-0942-8

Grau, Inaki, Papadopoulos, Panagiotis, Skarvelis-Kazakos, Spyros, Cipcigan, Liana Mirela

, Bockelmann-Evans, Bettina Nicole

and Zabala, Eduardo 2014. Management of electric vehicle battery charging in distribution networks with multi-agent systems. Electric Power Systems Research 110 , pp. 172-179. 10.1016/j.epsr.2014.01.014

Green, Robert N., Donaldson, Oliver W., Dafydd, Meilyr, Evans, Samuel Lewin

and Kulkarni, Rohit 2014. Biomechanical study: determining the optimum insertion angle for screw-in suture anchors - is Deadman's Angle correct? Arthroscopy: The Journal of Arthroscopic & Related Surgery 30 (12) , pp. 1535-1539. 10.1016/j.arthro.2014.07.010

Griffiths, Huw, Van De Linde, F., Uliah, N., Haddad, Abderrahmane

and Harid, N. 2014. High frequency and impulse earthing for surge arresters. International conference on lightning protection (ICLP) , pp. 1454-1459. 10.1109/ICLP.2014.6973359

Gu, Kai, Jin, Fei

, Al-Tabbaa, Abir and Shi, Bin 2014. Activation of ground granulated blast furnace slag by using calcined dolomite. Construction and Building Materials 68 , pp. 252-258. 10.1016/j.conbuildmat.2014.06.044

Gu, Kai, Jin, Fei

, Al-Tabbaa, Abir, Shi, Bin and Liu, Jin 2014. Mechanical and hydration properties of ground granulated blastfurnace slag pastes activated with MgO–CaO mixtures. Construction and Building Materials 69 , pp. 101-108. 10.1016/j.conbuildmat.2014.07.032

Gu, Kai, Tang, Chaosheng, Shi, Bin, Hong, Jiaojiao and Jin, Fei

2014. A study of the effect of temperature on the structural strength of a clayey soil using a micropenetrometer. Bulletin of Engineering Geology and the Environment 73 (3) , pp. 747-758. 10.1007/s10064-013-0543-y

Guo, Dongsheng, Clark, David

, Lathi, Deepak Kamlakar, Harid, Noureddine

, Griffiths, Huw, Ainsley, Alan and Haddad, Abderrahmane

2014. Controlled large-scale tests of practical grounding electrodes--part I: test facility and measurement of site parameters. IEEE Transactions on Power Delivery 29 (3) , pp. 1231-1239. 10.1109/TPWRD.2013.2284261

Gupta, Apeksha, Cemesova, Alexandra

, Hopfe, Christina, Rezgui, Yacine

and Sweet, Tracy

2014. A conceptual framework to support solar PV simulation using an open-BIM data exchange standard. Automation in Construction 37 , pp. 166-181. 10.1016/j.autcon.2013.10.005

Gwynne, S., Spezi, Emiliano

, Maggs, R., Jones, G., Rackley, T., Mukherjee, S., Hawkins, M., Radhakrishna, G., Ray, R., Miles, E. and Crosby, T. 2014. Prospective review of outlining in the UK NeoSCOPE esophageal trial. International Journal of Radiation Oncology - Biology - Physics 90 (1) , S733-S733. 10.1016/j.ijrobp.2014.05.2135

Gwynne, S., Spezi, Emiliano

, Maggs, R., Parsons, P., Crosby, T., Adams, R., Mukherjee, S., Nixon, L. S., Ray, R., Miles, E., Sebag-Montefiore, D. and Staffurth, J. 2014. Progress towards prospective real-time review of outlining in GI trials at a UK radiation therapy quality assurance center. International Journal of Radiation Oncology*Biology*Physics 90 (S1) , S734-S735. 10.1016/j.ijrobp.2014.05.2138

Hamzehbahmani, Hamed, Anderson, Philip Ian

, Hall, Jeremy Peter

and Fox, David 2014. Eddy current loss estimation of edge burr-affected magnetic laminations based on equivalent electrical network - Part I: Fundamental concepts and FEM modeling. IEEE Transactions on Power Delivery Pwrd 29 (2) , pp. 642-650. 10.1109/TPWRD.2013.2272663

Hazelwood, Tobias, Jefferson, Anthony Duncan

, Lark, Robert John

and Gardner, Diane Ruth

2014. Long-term stress relaxation behavior of predrawn poly(ethylene terephthalate). Journal of Applied Polymer Science 131 (23) , 41208. 10.1002/app.41208

Hirshy, Hassan

, Scholz, Steffen G., Jourlin, Y., Tonchev, S., Reynaud, S., Boukenter, A. and Parriaux, O. 2014. 2N Period submicron grating at the inner wall of a metal cylinder. Microsystem Technologies 20 (10-11) , pp. 1833-1837. 10.1007/s00542-013-1949-y

Hockley, Frances Anne, Wilson, Catherine

, Graham, Nicola and Cable, Joanne

2014. Combined effects of flow condition and parasitism on shoaling behaviour of female guppies Poecilia reticulata. Behavioral Ecology and Sociobiology 68 (9) , pp. 1513-1520. 10.1007/s00265-014-1760-5

Hockley, Frances Anne, Wilson, Catherine

, Brew, A. and Cable, Joanne

2014. Fish responses to flow velocity and turbulence in relation to size, sex and parasite load. Journal of the Royal Society Interface 11 (91) , 20130814. 10.1098/rsif.2013.0814

Howieson, Alan J., Jones, Michael D. and Theobald, Peter

2014. The change in energy absorbed post removal of metalwork in a simulated paediatric long bone fracture. Journal of Children's Orthopaedics 8 (5) , pp. 443-447. 10.1007/s11832-014-0606-z

Hu, Liguo, Zhou, Han, Zhu, Hanxing

, Fan, Tongxiang and Zhang, Di 2014. Efficient network-matrix architecture for general flow transport inspired by natural pinnate leaves. Soft Matter 10 , pp. 8442-8447. 10.1039/C4SM01413H

Huckle, D., Hall, J., Bowen, Jenna

, Allender, Christopher, Cuenca, Jerome

and Porch, Adrian

2014. Towards an efficient biosensor for the detection of lipopolysaccharide in sepsis using molecularly imprinted polymers. British Journal of Anaesthesia 112 (1) , p. 199. 10.1093/bja/aet373

Irfan, Muhammad

, Koj, Aleksandra

, Sedighi, Majid and Thomas, Hywel

2014. GIS based site ranking using neighbourhood analysis and comparison. ThinkMind , pp. 51-57.

Islam, Nazrul and Brousseau, Emmanuel Bruno Jean Paul

2014. Implementing a multi-staged methodology to micro and nanotechnology: technology maturity assessment and framework. International Journal of Productivity and Performance Management 63 (2) , pp. 170-193. 10.1108/IJPPM-01-2013-0010

Jamali, Hazim U., Sharif, K. J., Evans, H. P.

and Snidle, R. W.

2014. The transient effects of profile modification on elastohydrodynamic oil films in helical gears. Tribology Transactions 58 (1) , pp. 119-130. 10.1080/10402004.2014.936990

Jefferson, Anthony Duncan

, Tenchev, Rosen, Chitez, Adriana

, Mihai, Iulia Carmen

, Garry, Cole and Lyons, Paul 2014. Finite element crack width computations with a thermo-hygro-mechanical-hydration model for concrete. European Journal of Environmental and Civil Engineering 18 (7) , pp. 793-813. 10.1080/19648189.2014.896755

Jin, Fei

and Al-Tabbaa, Abir 2014. Characterisation of different commercial reactive magnesia. Advances in Cement Research 26 (2) , pp. 101-113. 10.1680/adcr.13.00004

Jin, Fei

and Al-Tabbaa, Abir 2014. Evaluation of novel reactive MgO activated slag binder for the immobilisation of lead and zinc. Chemosphere 117 , pp. 285-294. 10.1016/j.chemosphere.2014.07.027

Jin, Fei

and Al-Tabbaa, Abir 2014. Strength and hydration products of reactive MgO–silica pastes. Cement and Concrete Composites 52 , pp. 27-33. 10.1016/j.cemconcomp.2014.04.003

Jin, Jian, Ji, Ping and Liu, Ying

2014. Prioritising engineering characteristics based on customer online reviews for quality function deployment. Journal of Engineering Design 25 (7-9) , pp. 303-324. 10.1080/09544828.2014.984665

Kadiri, Margaret Osikhofe, Ahmadian, Reza

and Kay, David 2014. An assessment of the impacts of a tidal renewable energy scheme on the eutrophication potential of the Severn estuary, UK. Computers & Geosciences 71 , pp. 3-10. 10.1016/j.cageo.2014.07.018

Kadiri, Margaret Osikhofe, Bockelmann-Evans, Bettina Nicole

and Rauen, William Bonino 2014. Assessing the susceptibility of two UK estuaries to nutrient enrichment. Continental Shelf Research 88 , pp. 151-160. 10.1016/j.csr.2014.08.002

Kara, Sibel, Stoesser, Thorsten

, Sturm, Terry W. and Mulahasan, Saad 2014. Flow dynamics through a submerged bridge opening with overtopping. Journal of Hydraulic Research 53 (2) , pp. 186-195. 10.1080/00221686.2014.967821

Karihaloo, Bhushan Lal

2014. A new philosophy for the design of RC structures based on concepts of fracture mechanics. Procedia Materials Science 3 , pp. 369-377. 10.1016/j.mspro.2014.06.063

Karimian, N., Wilson, J. W., Peyton, A. J., Yin, W., Liu, J.

and Davis, C. L. 2014. Differential permeability behaviour of P9 and T22 power station Steels. Journal of Magnetism and Magnetic Materials 352 (1) , pp. 81-90. 10.1016/j.jmmm.2013.09.059

Keenan, Bethany

, Izatt, Maree T., Askin, Geoffrey N., Labrom, Robert D., Pettet, Graeme J., Pearcy, Mark J. and Adam, Clayton J. 2014. Segmental torso masses in adolescent idiopathic scoliosis. Clinical Biomechanics 29 (7) , pp. 773-779. 10.1016/j.clinbiomech.2014.06.002

Keenan, Bethany

, Izatt, Maree T, Askin, Geoffrey N, Labrom, Robert D, Pearcy, Mark J and Adam, Clayton J 2014. Supine to standing Cobb angle change in idiopathic scoliosis: the effect of endplate pre-selection. Scoliosis 9 10.1186/1748-7161-9-16

Kerfriden, Pierre

, Ródenas, J. J. and Bordas, Stephane Pierre Alain

2014. Certification of projection-based reduced order modelling in computational homogenisation by the constitutive relation error. International Journal for Numerical Methods in Engineering 97 (6) , pp. 395-422. 10.1002/nme.4588

Kiely, Christopher

, He, Qian

, Tiruvalam, Ramchandra, Dimitratos, Nikolaos

, Forde, Michael M., Sankar, Meenakshisundaram

and Hutchings, Graham John

2014. Assessing and controlling the size, morphology and composition of supported bimetallic catalyst nanoparticles. Microscopy and Microanalysis 20 (S3) , pp. 74-75. 10.1017/S1431927614002098

Kundu, A.

, Adhikari, S. and Friswell, M. I. 2014. Stochastic finite elements of discretely parameterized random systems on domains with boundary uncertainty. International Journal for Numerical Methods in Engineering 100 (3) , pp. 183-221. 10.1002/nme.4733

Kundu, Abhishek

and Adhikari, Sondipon 2014. Transient response of structural dynamic systems with parametric uncertainty. Journal of Engineering Mechanics 140 (2) , pp. 315-331. 10.1061/(ASCE)EM.1943-7889.0000643

Kundu, Abhishek

, DiazDelaO, F. A., Adhikari, S. and Friswell, M.I. 2014. A hybrid spectral and metamodeling approach for the stochastic finite element analysis of structural dynamic systems. Computer Methods in Applied Mechanics and Engineering 270 , pp. 201-219. 10.1016/j.cma.2013.11.013

Kwan, Alan

, Hatem, Wadhah Amer and Miles, John 2014. The impact of non-verbal communication on team productivity during design. International Journal of Management (IJM) 5 (12) , pp. 43-68.

Labib, Amr, Kennedy, David

and Featherston, Carol Ann

2014. Free vibration analysis of beams and frames with multiple cracks for damage detection. Journal of Sound and Vibration 333 (20) , pp. 4991-5003. 10.1016/j.jsv.2014.05.015

Lam, M. Y.

and Ghidaoui, M. S. 2014. Fourier analysis of the roll-up and merging of coherent structures in shallow mixing layers. Environmental Fluid Mechanics 14 (5) , pp. 997-1026. 10.1007/s10652-014-9371-2

Lei, Song, Zhang, Wen-Shou, Lin, Jia-Hao, Yue, Qian-Jin, Kennedy, David

and Williams, F. W. 2014. Frequency domain response of a parametrically excited riser under random wave forces. Journal of Sound and Vibration 333 (2) , pp. 485-498. 10.1016/j.jsv.2013.09.025

Lester, Jason F., Evans, Lauren Marie, Yousef, Zaheer R., Penney, A., Brown, Paul and Perks, Richard

2014. A national audit of current cardiac device policies from radiotherapy centres across the UK. Clinical Oncology 26 (1) , pp. 45-50. 10.1016/j.clon.2013.09.004

Lewis, Jonathan, Valera Medina, Agustin

and Morris, Steven

2014. Augmenting the structures in a swirling flame via diffusive injection. Journal of Combustion 2014 , 280501. 10.1155/2014/280501

Li, D. M.

, Liew, K. M. and Cheng, Y. M. 2014. Analyzing elastoplastic large deformation problems with the complex variable element-free Galerkin method. Computational Mechanics 53 (6) , pp. 1149-1162. 10.1007/s00466-013-0954-4

Li, D.M.

, Liew, K.M. and Cheng, Yumin 2014. An improved complex variable element-free Galerkin method for two-dimensional large deformation elastoplasticity problems. Computer Methods in Applied Mechanics and Engineering 269 , pp. 72-86. 10.1016/j.cma.2013.10.018

Li, D.M.

, Zhang, Zan and Liew, K.M. 2014. A numerical framework for two-dimensional large deformation of inhomogeneous swelling of gels using the improved complex variable element-free Galerkin method. Computer Methods in Applied Mechanics and Engineering 274 , pp. 84-102. 10.1016/j.cma.2014.02.008

Li, Luye, Qin, Feiwei, Gao, Shuming and Liu, Ying

2014. An approach for design rationale retrieval using ontology-aided indexing. Journal of Engineering Design 25 (7-9) , pp. 259-279. 10.1080/09544828.2014.969690

Li, Zhaojun, Li, Haijiang

, Wang, Xicheng and Li, Keqiu 2014. A generic cloud platform for engineering optimization based on OpenStack. Advances in engineering software 75 , pp. 42-57. 10.1016/j.advengsoft.2014.05.001

Liang, D., Xia, J., Falconer, Roger Alexander

and Zhang, J. 2014. Study on tidal resonance in Severn Estuary and Bristol Channel. Coastal Engineering Journal 56 (1) , pp. 1-18. 10.1142/S0578563414500028

Liang, Dongfang, Xia, Junqiang, Falconer, Roger Alexander

and Zhang, Jingxin 2014. On the refinement of a boundary-fitted shallow water model. Coastal Engineering Journal 56 (1) , pp. 1-19. 10.1142/S0578563414500016

Lim, Soon Chong Johnson, Wang, Shilong and Liu, Ying

2014. Discovering contextual tags from product review using semantic relatedness. Journal of Industrial and Production Engineering 31 (2) , pp. 108-118. 10.1080/21681015.2014.895966

Lind, Steven J. 2014. On the dynamics of non-spherical magnetic microbubbles. Physics of Fluids 26 (6) , 061901. 10.1063/1.4878338

Liu, J.

, Strangwood, M., Davis, C. L. and Parker, J. 2014. Non-destructive characterisation of N/Al level in P91 steels using electromagnetic sensors. Materials Science and Technology 31 (9) , pp. 1042-1050. 10.1179/1743284714Y.0000000642

Livermore, Luke, Ugalde Loo, Carlos Ernesto

, Mu, Qing, Liang, Jun

, Ekanayake, Janaka

2014. Damping of subsynchronous resonance using a voltage source converter-based high-voltage direct-current link in a series-compensated Great Britain transmission network. IET Generation, Transmission and Distribution 8 (3) , pp. 542-551. 10.1049/iet-gtd.2013.0095

Lok, K. S., Stallard, T. J., Stansby, P. K. and Jenkins, Nicholas

2014. Optimisation of a clutch-rectified power take off system for a heaving wave energy device in irregular waves with experimental comparison. International Journal of Marine Energy 8 , pp. 1-16. 10.1016/j.ijome.2014.09.001

Lydon, Gearoid P., Ingham, Derek B. and Mourshed, Monjur

2014. Ultra clean ventilation system performance relating to airborne infections in operating theatres using CFD modelling. Building Simulation 7 (3) , pp. 277-287. 10.1007/s12273-013-0145-4

Mani, Mahesh Kumar, Viola, Giuseppe, Reece, Mike J., Hall, Jeremy Peter

2014. Fabrication of carbon nanotube reinforced iron based magnetic alloy composites by spark plasma sintering. Journal of Alloys and Compounds 601 , pp. 146-153. 10.1016/j.jallcom.2014.02.169

Mani, Mahesh Kumar, Viola, Giuseppe, Reece, Mike J., Hall, Jeremy Peter

2014. Improvement of interfacial bonding in carbon nanotube reinforced Fe-50Co composites by Ni-P coating: Effect on magnetic and mechanical properties. Materials Science and Engineering: B 188 , pp. 94-101. 10.1016/j.mseb.2014.06.009

Mani, Mahesh Kumar, Viola, Giuseppe, Reece, Mike J., Hall, Jeremy Peter

2014. Mechanical and magnetic characterisation of SiC whisker reinforced Fe-Co alloy composites. Materials Science and Engineering A 592 , pp. 19-27. 10.1016/j.msea.2013.10.099

Marshall, Christopher

, Talboys, Matthew, Bukhari, Syed and Evans, William

2014. Quantification of the activity of tritium produced during the routine synthesis of 18F fluorodeoxyglucose for positron emission tomography. Journal of Radiological Protection 34 (2) , pp. 435-444. 10.1088/0952-4746/34/2/435

Martinez, L., Higuchi, S., MacLachlan, A. J., Stavrinadis, A., Miller, N. C., Diedenhofen, S. L., Bernechea, Maria

, Sweetnam, S., Nelson, J., Haque, S. A., Tajima, K. and Konstantatos, G. 2014. Improved electronic coupling in hybrid organic-inorganic nanocomposites employing thiol-functionalized P3HT and bismuth sulfide nanocrystals. Nanoscale 6 (17) , pp. 10018-10026. 10.1039/C4NR01679C

Masoero, Enrico, Del Gado, Emanuela, Pellenq, Roland J. -M., Yip, Sidney and Ulm, Franz-Josef 2014. Nano-scale mechanics of colloidal C-S-H gels. Soft Matter 10 (3) , pp. 491-499. 10.1039/c3sm51815a

Masoero, Enrico, Thomas, Jeffrey J. and Jennings, Hamlin M. 2014. A reaction zone hypothesis for the effects of particle size and water-to-cement ratio on the early hydration kinetics of C3S. Journal of the American Ceramic Society 97 (3) , pp. 967-975. 10.1111/jace.12713

Mastrocinque, Ernesto, Yuce, Baris

, Lambiase, Alfredo and Packianather, Michael Sylvester

2014. A system of systems approach to supply chain design. Applied Mechanics and Materials 496 , pp. 2807-2814. 10.4028/www.scientific.net/AMM.496-500.2807

Meesapawong, Pawadee, Rezgui, Yacine

and Li, Haijiang

2014. Planning innovation orientation in public research and development organizations: Using a combined Delphi and Analytic Hierarchy Process approach. Technological Forecasting and Social Change 87 , pp. 245-256. 10.1016/j.techfore.2013.12.023

Melikhov, Yevgen

, Hadimani, R. L. and Raghunathan, Arun 2014. Phenomenological modelling of first order phase transitions in magnetic systems. Journal of Applied Physics 115 (18) , 183902. 10.1063/1.4875678

Mierczak, Lukasz P., Melikhov, Yevgen

and Jiles, David C. 2014. Determining residual stress depth profiles using the magnetic Barkhausen effect. IEEE Transactions on Magnetics 50 (10) , pp. 1-5. 10.1109/TMAG.2014.2329455

Morini, L.

, Piccolroaz, A. and Mishuris, G. 2014. Remarks on the energy release rate for an antiplane moving crack in couple stress elasticity. International Journal of Solids and Structures 51 (18) , pp. 3087-3100. 10.1016/j.ijsolstr.2014.05.005

Moumnassi, M., Bordas, Stephane Pierre Alain

, Figueredo, R. and Sansen, P. 2014. Analysis using higher-order XFEM: implicit representation of geometrical features from a given parametric representation. Mechanics & Industry 15 (5) , pp. 443-448. 10.1051/meca/2014033

Mousa, Alkhair A., Pham, Duc Troung and Soe, Shwe 2014. Pre-processing studies for selective laser sintering of glass beads-filled polyamide 12 composites. International Journal of Rapid Manufacturing 4 (1) , pp. 28-48. 10.1504/IJRAPIDM.2014.062036

Mousa, S., Harid, N., Griffiths, Huw and Haddad, Abderrahmane

2014. Experimental investigation of high frequency and transient performance of earth rod systems. Electric Power Systems Research 113 , pp. 196-203. 10.1016/j.epsr.2014.03.024

Mu, Qing, Liang, Jun

, Zhou, Xiaoxin, Li, Yalou and Zhang, Xing 2014. Improved ADC model of voltage-source converters in DC grids. IEEE Transactions on Power Electronics 29 (11) , pp. 5738-5748. 10.1109/TPEL.2014.2301197

Mu, Yunfei, Wu, Jianzhong

, Jia, Hongjie and Wang, Chengshan 2014. A Spatial-Temporal model for grid impact analysis of plug-in electric vehicles. Applied Energy 114 , pp. 456-465. 10.1016/j.apenergy.2013.10.006

Natarajan, S., Ferreira, A. J. M., Bordas, Stephane Pierre Alain

, Carrera, E., Cinefra, M. and Zenkour, A. M. 2014. Analysis of functionally graded material plates using triangular elements with cell-based smoothed discrete shear gap method. Mathematical Problems in Engineering 2014 , -.

Natarajan, S., Kerfriden, Pierre

, Mahapatra, D. Roy and Bordas, Stephane Pierre Alain

2014. Numerical analysis of the inclusion-crack interaction by the extended finite element method. International Journal for Computational Methods in Engineering Science and Mechanics 15 (1) , pp. 26-32. 10.1080/15502287.2013.833999

Newman, Daniel

, Wells, Peter Erskine

, Donovan, Ceri, Nieuwenhuis, Paul Andre Henri Francois and Davies, Huw Charles

2014. Urban, sub-urban or rural: where is the best place for electric vehicles? International Journal of Automotive Technology and Management, 14 (3/4) , pp. 306-323. 10.1504/IJATM.2014.065295

Newman, Daniel

, Wells, Peter Erskine

, Nieuwenhuis, Paul Andre Henri Francois, Donovan, Ceri and Davies, Huw Charles

2014. Learning from electric cars as socio-technical mobility experiments: where next? Transfers 4 (2) , pp. 23-41. 10.3167/TRANS.2014.040203

Nguyan-Xuan, Hung, Hoang, T. and Nguyen, Vinh Phu

2014. An isogeometric analysis for elliptic homogenization problems. Computers & Mathematics with Applications 67 (9) , pp. 1722-1741. 10.1016/j.camwa.2014.01.001

Nguyen-Xuan, H., Tran, Loc V., Thai, Chien H., Kulasegaram, Sivakumar

and Bordas, Stephane Pierre Alain

2014. Isogeometric analysis of functionally graded plates using a refined plate theory. Composites: Part B Engineering 64 , pp. 222-234. 10.1016/j.compositesb.2014.04.001

Nguyen, Vinh Phu

, Kerfriden, Pierre

and Bordas, Stephane Pierre Alain

2014. Two- and three-dimensional isogeometric cohesive elements for composite delamination analysis. Composites Part B: Engineering 60 , pp. 193-212. 10.1016/j.compositesb.2013.12.018

Nguyen, Vinh Phu

, Kerfriden, Pierre

, Bordas, Stephane Pierre Alain

and Rabczuk, Timon 2014. Isogeometric analysis suitable trivariate NURBS representation of composite panels with a new offset algorithm. Computer-Aided Design 55 , pp. 49-63. 10.1016/j.cad.2014.05.004

Nguyen, Vinh Phu

, Kerfriden, Pierre

, Brino, Marco, Bordas, Stephane Pierre Alain

and Bonisoli, Elvio 2014. Nitsche's method for two and three dimensional NURBS patch coupling. Computational Mechanics 53 (6) , pp. 1163-1182. 10.1007/s00466-013-0955-3

Nirmal Peiris, T. A., Wijayantha, Upul and Garcia Canadas, Jorge 2014. Insights into mechanical compression and the enhancement in performance by Mg(OH)2 coating in flexible dye sensitized solar cells. Physical Chemistry Chemical Physics 16 , pp. 2912-2919. 10.1039/c3cp53260g

Nishio Ayre, Wayne

, Denyer, Stephen P. and Evans, Samuel L.

2014. Ageing and moisture uptake in polymethyl methacrylate (PMMA) bone cements. Journal of the Mechanical Behavior of Biomedical Materials 32 , pp. 76-88. 10.1016/j.jmbbm.2013.12.010

Nlebedim, I. C., Melikhov, Yevgen

and Jiles, David C. 2014. Temperature dependence of magnetic properties of heat treated cobalt ferrite. Journal of Applied Physics 115 (4) , 043903. 10.1063/1.4862300

Noori-Kalkhoran, Omid, Minuchehr, Abdolhamid, Rahgoshay, Mohammad and Shirani, Amir Saied 2014. Short-term and long-term analysis of WWER-1000 containment parameters in a large break LOCA. Progress in Nuclear Energy 74 , pp. 201-212. 10.1016/j.pnucene.2014.03.007

Noorikalkhoran, Omid

, Minuchehr, Abdolhamid, Akbari-Jeyhouni, Reza, Shirani, Amir Saied and Rahgoshay, Mohammad 2014. Simulation of rod ejection accident in a WWER-1000 Nuclear Reactor by using PARCS code. Annals of Nuclear Energy 65 , pp. 132-140. 10.1016/j.anucene.2013.11.003

Noorikalkhoran, Omid

, Minuchehr, Abdolhamid, Shirani, Amir saied and Rahgoshay, Mohammad 2014. Full scope thermal-neutronic analysis of LOFA in a WWER-1000 reactor core by coupling PARCS v2.7 and COBRA-EN. Progress in Nuclear Energy 74 , pp. 193-200. 10.1016/j.pnucene.2014.03.006

Noorikalkhoran, Omid

, Rahgoshay, Mohammad, Minuchehr, Abdolhamid and Shirani, Amir Saied 2014. Analysis of thermal–hydraulic parameters of WWER-1000 containment in a large break LOCA. Annals of Nuclear Energy 68 , pp. 101-111. 10.1016/j.anucene.2014.01.009

O'Carroll, Conor, Scholz, Beate, Nogueira, Maria M., Avellis, Gianna, Marin, Laura, Bostenaru Dan, Maria, Chmielowski, Rila, Di Trapani, Antonella and Theodoridou, Magdalini

2014. Virtual mobility can drive equality. Nature 511 (7509) , p. 292. 10.1038/511292b

Omar, F., Brousseau, E.

, Elkaseer, A.

, Kolew, A., Prokopovich, P.

and Dimov, S. 2014. Development and experimental validation of an analytical model to predict the demoulding force in hot embossing. Journal of Micromechanics and Microengineering 24 (5) , -. 10.1088/0960-1317/24/5/055007

Osei-Twumasi, A. and Falconer, Roger Alexander

2014. Diffuse source pollution studies in a physical model of the Severn Estuary, UK. Journal of Water Resource and Protection 6 , pp. 1390-1403.

Owen, Robert J., Grosvenor, Roger Ivor

, Porretta, S. and Prickett, Paul William

2014. A repairable mechanical system reliability assessment methodology applied in a steelmaking context. Quality and Reliability Engineering International 30 (7) , pp. 1093-1107. 10.1002/qre.1526

Özel, Fatih Mehmet, Davies, Huw, Ernst, Christian Simon and Nieuwenhuis, Paul Andre Henri Francois 2014. How to strategically position European SMEs as part of an electric vehicle technology value chain. International Journal of Electric and Hybrid Vehicles 6 (3) , pp. 227-254. 10.1504/IJEHV.2014.065728

Pacella, Manuela

, Axinte, D. A., Butler-Smith, P. W. and Daine, M. 2014. On the topographical/chemical analysis of polycrystalline diamond pulsed laser ablated surfaces. Procedia CIRP 13 , pp. 387-392. 10.1016/j.procir.2014.04.066

Pacella, Manuela

, Butler-Smith, P. W., Axinte, D. A. and Fay, M. W. 2014. FIB/TEM/EELS micro/nanometric investigations of the effects of laser ablation on the diamond/binder structure in polycrystalline diamond composites. Journal of Materials Processing Technology 214 (5) , pp. 1153-1161. 10.1016/j.jmatprotec.2013.10.007

Page, K., Harbottle, M. J.

, Cleall, P. J.

and Hutchings, T. R. 2014. Heavy metal leaching and environmental risk from the use of compost-like output as an energy crop growth substrate. Science of the Total Environment 487 , pp. 260-271. 10.1016/j.scitotenv.2014.04.021

Pan, Ying, Follett, Elizabeth

, Chamecki, Marcelo and Nepf, Heidi 2014. Strong and weak, unsteady reconfiguration and its impact on turbulence structure within plant canopies. Physics of Fluids 26 , 105102. 10.1063/1.4898395

Pandiyaraj, K. Navaneetha, Deshmukh, R. R., Mahendiran, R., Su, Pi-G, Yassitepe, Emre, Shah, Ismat, Perni, Stefano, Prokopovich, Polina

and Nadagouda, Mallikarjuna N. 2014. Influence of operating parameters on surface properties of RF glow discharge oxygen plasma treated TiO2/PET film for biomedical application. Materials Science and Engineering C 36 , pp. 309-319. 10.1016/j.msec.2013.12.018

Pavlidis, Dimitrios, Xie, Zhihua

, Percival, James R., Gomes, Jefferson L.M.A., Pain, Christopher C. and Matar, Omar K. 2014. Two- and three-phase horizontal slug flow simulations using an interface-capturing compositional approach. International Journal of Multiphase Flow 67 , pp. 85-91. 10.1016/j.ijmultiphaseflow.2014.07.007

Peiris, T. A. Nirmal, Sagu, Jagdeep S., Wijayantha, K. G. Upul and Garcia Canadas, Jorge 2014. Electrochemical determination of the density of states of nanostructured NiO films. ACS Applied Materials & Interfaces 6 (17) , pp. 14988-14993. 10.1021/am502827z

Percival, James R., Pavlidis, Dimitrios, Xie, Zhihua

, Gomes, Jefferson L.M., Sakai, Mikio, Shigeto, Yusuke, Takahashi, Hiroyuki, Matar, Omar K. and Pain, Christopher C. 2014. Control volume finite element modelling of segregation of sand and granular flows in fluidized beds. International Journal of Multiphase Flow 67 , pp. 191-199. 10.1016/j.ijmultiphaseflow.2014.10.002

Perni, Stefano, Hakala, Veera and Prokopovich, Polina

2014. Biogenic synthesis of antimicrobial silver nanoparticles capped with L-cysteine. Colloids and Surfaces A: Physicochemical and Engineering Aspects 460 , pp. 219-224. 10.1016/j.colsurfa.2013.09.034

Petri, Ioan

, Beach, Tom

, Wilson, Ian E. and Li, Haijiang

2014. Engaging construction stakeholders with sustainability through a knowledge harvesting platform. Computers in Industry 65 (3) , pp. 449-469. 10.1016/j.compind.2014.01.008

Petri, Ioan

, Li, Haijiang

, Chunfeng, Yang, Yuce, Baris

and Jayan, Bejay 2014. A modular optimisation model for reducing energy consumption in large scale building facilities. Renewable and Sustainable Energy Reviews 38 , pp. 990-1002. 10.1016/j.rser.2014.07.044

Petri, Ioan

, Punceva, Magdalena, Rana, Omer Farooq

, Theodorakopoulos, Georgios

and Rezgui, Yacine

2014. A broker based consumption mechanism for social clouds. International Journal of Cloud Computing 2 (1) , pp. 45-57.

Petri, Ioan

, Rana, Omer Farooq

, Silaghi, Gheorghe Cosmin and Rezgui, Yacine

2014. Risk assessment in service provider communities. Future Generation Computer Systems 41 , pp. 32-43. 10.1016/j.future.2014.08.013

Pettinato, Cinzia, Spezi, Emiliano

, Nanni, Cristina, Grassetto, Gaia, Monari, Fabio, Allegri, Vincenzo, Civollani, Simona, Cima, Simona, Zagni, Paolo, Mazzarotto, Renzo, Colletti, Patrick M., Rubello, Domenico and Fanti, Stefano 2014. Pretherapeutic dosimetry in patients affected by metastatic thyroid cancer using I-124 PET/CT sequential scans for I-131 treatment planning. Clinical Nuclear Medicine 39 (8) , E367-E374. 10.1097/RLU.0000000000000490

Piazzon, Luca, Giofre, Rocco, Quaglia, Roberto

, Camarchia, Vittorio, Pirola, Marco, Colantonio, Paolo, Giannini, Franco and Ghione, Giovanni 2014. Effect of load modulation on phase distortion in Doherty power amplifiers. IEEE Microwave and Wireless Components Letters 24 (7) , pp. 505-507. 10.1109/LMWC.2014.2316507

Picelli Sanches, Renato, Vicente, W. M. and Pavanello, R. 2014. Bi-directional evolutionary structural optimization for design-dependent fluid pressure loading problems. Engineering Optimization 47 (10) , pp. 1324-1342. 10.1080/0305215X.2014.963069

Pirola, Marco, Quaglia, Roberto

, Ghione, Giovanni, Ciccognani, Walter and Limiti, Ernesto 2014. 13-bit GaAs serial-to-parallel converter with compact layout for core-chip applications. Microelectronics Journal 45 (7) , pp. 864-869. 10.1016/j.mejo.2014.04.036

Porwal, Harshit, Tatarko, Peter, Saggar, Richa, Grasso, Salvatore, Mani, Mahesh Kumar, Dlouhý, Ivo, Dusza, Jan and Reece, Mike J. 2014. Tribological properties of silica-graphene nano-platelet composites. Ceramics International 40 (8) , pp. 12067-12074. 10.1016/j.ceramint.2014.04.046

Preedy, Emily Callard, Brousseau, Emmanuel Bruno Jean Paul

, Evans, Samuel Lewin

, Perni, Stefano and Prokopovich, Polina

2014. Adhesive forces and surface properties of cold gas plasma treated UHMWPE. Colloids and Surfaces A: Physicochemical and Engineering Aspects 460 , pp. 83-89. 10.1016/j.colsurfa.2014.03.052

Pugh, Daniel

, Crayford, Andrew Philip

, O'Doherty, Timothy

and Steer, Julian

2014. Laminar flame speed and markstein length characterisation of steelworks gas blends. Applied Energy 136 , pp. 1026-1034. 10.1016/j.apenergy.2014.04.044

Qadrdan, Meysam

, Wu, Jianzhong

and Ekanayake, Janaka

2014. Operating strategies for a GB integrated gas and electricity network considering the uncertainty in wind power forecasts. IEEE Transactions on Sustainable Energy 5 (1) , pp. 128-138. 10.1109/TSTE.2013.2274818

Qiu, Chunlei

and Wu, Xinhua 2014. High cycle fatigue and fracture behaviour of a hot isostatically pressed nickel-based superalloy. Philosophical Magazine 94 (3) , pp. 242-264. 10.1080/14786435.2013.852287

Quaglia, Roberto

, Camarchia, Vittorio and Pirola, Marco 2014. Dual-band GaN MMIC power amplifier for microwave backhaul applications. IEEE Microwave and Wireless Components Letters 24 (6) , pp. 409-411. 10.1109/LMWC.2014.2313587

Quaglia, Roberto

, Camarchia, Vittorio, Pirola, Marco, Moreno Rubio, Jorge

and Ghione, Giovanni 2014. Linear GaN MMIC combined power amplifiers for 7-GHz microwave backhaul. IEEE Transactions on Microwave Theory and Techniques 62 (11) , pp. 2700-2710. 10.1109/TMTT.2014.2359856

Quaglia, Roberto

, Camarchia, Vittorio, Tao, Jiang, Pirola, Marco, Donati Guerrieri, Simona and Loran, Brian 2014. K-Band GaAs MMIC Doherty power amplifier for microwave radio with optimized driver. IEEE Transactions on Microwave Theory and Techniques 62 (11) , pp. 2518-2525. 10.1109/TMTT.2014.2360395

Quaglia, Roberto

, Giannini, F., Colantonio, P., Piazzon, L., Ghione, G., Camarchia, V., Giofrè, R. and Pirola, M. 2014. Experimental investigation of bias current and load modulation effects in phase distortion of GaN HEMTs. Electronics letters 50 (10) , pp. 773-775. 10.1049/el.2014.0983

Rackley, Tom, Caley, Andrew, Spezi, Emiliano

, Maggs, R., Jones, G., Miles, E., Ray, R., Crosby, T. and Gwynne, S. 2014. Esophageal delineation - lessons learned from pre-accrual benchmark cases in the UK NeoSCOPE esophageal trial. International Journal of Radiation Oncology - Biology - Physics 90 (1) , S10-S10. 10.1016/j.ijrobp.2014.05.088

Ramadan, Yousof, González-Sánchez, M. Isabel, Hawkins, Karl, Rubio-Retama, Jorge, Valero, Edelmira, Perni, Stefano, Prokopovich, Polina

and López-Cabarcos, Enrique 2014. Obtaining new composite biomaterials by means of mineralization of methacrylate hydrogels using the reaction-diffusion method. Materials Science and Engineering C 42 , pp. 696-704. 10.1016/j.msec.2014.06.017

Rath, Arup K., Lasanta, Tania, Bernechea, Maria

, Diedenhofen, Silke L. and Konstantatos, Gerasimos 2014. Determination of carrier lifetime and mobility in colloidal quantum dot films via impedance spectroscopy. Applied Physics Letters 104 (6) , 063504. 10.1063/1.4865089

Rath, Arup. K., Pelayo Garcia de Arquer, F., Stavrinadis, Alexandros, Lasanta, Tania, Bernechea, Maria

, Diedenhofen, Silke L. and Konstantatos, Gerasimos 2014. Remote trap passivation in colloidal quantum dot bulk nano-heterojunctions and its effect in solution-processed solar cells. Advanced Materials 26 (27) , pp. 4741-4747. 10.1002/adma.201400297

Rees, Marc, Wu, Jianzhong

and Abeysekera, Muditha

2014. Carbon constrained design of energy infrastructure for new build schemes. Applied Energy 113 , pp. 1220-1234. 10.1016/j.apenergy.2013.08.059

Ren, Yuheng, Lin, Binliang

, Sun, Jian and Pan, Shunqi

2014. Predicting water age distribution in the Pearl River Estuary using a three-dimensional model. Journal of Marine Systems 139 , pp. 276-287. 10.1016/j.jmarsys.2014.07.005

Rezgui, Yacine

, Marks, Adam, Alhajri, Hamed and Wilson, Ian 2014. Developing an ISDM adoption decision model using delphi and AHP. Arabian Journal for Science and Engineering 39 (4) , pp. 2799-2815. 10.1007/s13369-013-0904-7

Robson, Stephen

, Haddad, Abderrahmane

and Griffiths, Huw 2014. Fault location on branched networks using a multiended approach. IEEE Transactions on Power Delivery 29 (4) , pp. 1955-1963. 10.1109/TPWRD.2014.2302137

Rodger, M. P., Theobald, Peter

and Giddins, G. 2014. Vein grafts to augment flexor tendon repairs: a biomechanical study on strength and gap resistance. Journal of Hand Surgery: European Volume 40 (7) , pp. 695-699. 10.1177/1753193414564902

Rossetto, T., D'Ayala, D., Gori, F., Persio, R., Han, J., Novelli, V.

, Wilkinson, S. M., Alexander, D., Hill, M., Stephens, S., Kontoe, S., Elia, G., Verrucci, E., Vicini, A., Shelley, W. and Foulser-Piggott, R. 2014. The value of multiple earthquake missions: the EEFIT L’Aquila Earthquake experience. Bulletin of Earthquake Engineering 12 (1) , pp. 277-305. 10.1007/s10518-014-9588-y

Rowe, David James, Al-Malki, Sultan, Abduljabar, Ali Amin, Porch, Adrian

, Barrow, David

and Allender, Christopher J. 2014. Improved split-ring resonator for microfluidic sensing. IEEE Transactions on Microwave Theory and Techniques 62 (3) , pp. 689-699. 10.1109/TMTT.2014.2299514

Ru, Jinming, Kong, Bo, Zhu, Hanxing

, Shi, Zhongliang, Zhang, Di and Fan, Tongxiang 2014. Microstructure, capillary performance and gas permeability of biporous copper fabricated by tape casting. Powder Technology 256 , pp. 182-187.

Safarzadeh, O., Zolfaghari, A., Zangian, M. and Noorikalkhoran, Omid

2014. Pattern optimization of PWR reactor using hybrid parallel Artificial Bee Colony. Annals of Nuclear Energy 63 , pp. 295-301. 10.1016/j.anucene.2013.08.011

Santonastaso, Marco, Freakley, Simon J., Miedziak, Peter John, Brett, Gemma Louise, Edwards, Jennifer Kelly

and Hutchings, Graham John

2014. Oxidation of benzyl alcohol using in situ generated hydrogen peroxide. Organic Process Research and Development 18 (11) , pp. 1455-1460. 10.1021/op500195e

Sarathi, R., Harsha, V. Sri, Griffiths, Huw and Haddad, Abderrahmane

2014. Understanding water droplet initiated discharges on epoxy nanocomposites under harmonic AC voltages adopting UHF technique. IEEE Transactions on Dielectrics and Electrical Insulation 21 (2) , pp. 918-925. 10.1109/TDEI.2013.004378

Sarhosis, Vasilis, Oliveira, D. V., Lemos, J. V. and Lourenco, P. B. 2014. The effect of skew angle on the mechanical behaviour of masonry arches. Mechanics Research Communications 61 , pp. 53-59. 10.1016/j.mechrescom.2014.07.008

Sarhosis, Vasilis and Sheng, Y. 2014. Identification of material parameters for low bond strength masonry. Engineering Structures 60 , pp. 100-110. 10.1016/j.engstruct.2013.12.013

Sarhosis, Vasilis, Tsavdaridis, K. D. and Giannopoulos, I. 2014. Discrete element modelling of masonry infilled steel frames with multiple window openings subjected to lateral load variations. The Open Construction and Building Technology Journal 8 , pp. 93-103.

Sataev, M. S., Koshkarbaeva, S. T., Tleuova, A. B., Perni, Stefano, Aidarova, S. B. and Prokopovich, Polina

2014. Novel process for coating textile materials with silver to prepare antimicrobial fabrics. Colloids and Surfaces A: Physicochemical and Engineering Aspects 442 , pp. 146-151. 10.1016/j.colsurfa.2013.02.018

Sawle, Leanne

, Freeman, J., Marsden, J. and Matthews, J. 2014. Examining the test-retest reliability of the multiple single-leg hop-stabilization test and the relationship with leg dominance, age, and training [Abstract]. Journal of Athletic Training 49 (5) , e1. 10.4085/1062-6050-49.5.01

Schultz, Gerrit, Gallichan, Daniel

, Reisert, Marco, Hennig, Juergen and Zaitsev, Maxim 2014. MR image reconstruction from generalized projections. Magnetic Resonance in Medicine 72 (2) , pp. 546-557.

Sedighi, Majid and Thomas, Hywel R.

2014. Micro porosity evolution in compacted swelling clays - A chemical approach. Applied Clay Science 101 , pp. 608-618. 10.1016/j.clay.2014.09.027

Shamim, M. A., Bray, Michaela

, Remesan, R. and Han, D. 2014. A hybrid modelling approach for assessing solar radiation. Theoretical and Applied Climatology , pp. 1-18. 10.1007/s00704-014-1301-1

Shao, Xudong, Pan, Rensheng, Zhao, Hua and Shao, Zixuan 2014. Prestress loss of a new vertical prestressing anchorage system on concrete box-girder webs. Journal of Bridge Engineering 19 (2) , pp. 210-219. 10.1061/(ASCE)BE.1943-5592.0000522

Shi, Nan, Li, Xiaohui, Fan, Tongxiang, Zhou, Han, Zhang, Di and Zhu, Hanxing

2014. Artificial chloroplast: Au/chloroplast-morph-TiO2 with fast electron transfer and enhanced photocatalytic activity. International Journal of Hydrogen Energy 39 (11) , pp. 5617-5624.

Shon, Sudeok, Kwan, Alan Shu Khen

and Lee, Seungjae 2014. Shape control of cable structures considering concurrent/sequence control. Structural Engineering and Mechanics 52 (5) , pp. 919-935. 10.12989/sem.2014.52.5.919

Silani, Mohammad, Talebi, Hossein, Ziaei-Rad, Saeed, Kerfriden, Pierre

, Bordas, Stephane Pierre Alain

and Rabczuk, Timon 2014. Stochastic modelling of clay/epoxy nanocomposites. Composite Structures 118 , pp. 241-249. 10.1016/j.compstruct.2014.07.009

Simonovic, Julijana

2014. Synchronization in chains of material particles with non-linear features. FME Transactions 42 (4) , pp. 341-345. 10.5937/fmet1404341s

Singh, Rohit, Kamal, Tamer, Roulohamin, Nick, Maoharan, Gopikanthan, Ahmed, Bessam and Theobald, Peter

2014. Ankle fractures: a literature review of current treatment methods. Open Journal of Orthopedics 04 (11) , pp. 292-303. 10.4236/ojo.2014.411046

Sivasakthivel, T., Murugesan, K. and Thomas, Hywel Rhys

2014. Optimization of operating parameters of ground source heat pump system for space heating and cooling by Taguchi method and utility concept. Applied Energy 116 , pp. 76-85. 10.1016/j.apenergy.2013.10.065

Skripcak, Tomas, Belka, Claus, Bosch, Walter, Brink, Carsten, Brunner, Thomas, Budach, Volker, Buettner, Daniel, Debus, Juergen, Dekker, Andre, Grau, Cai, Gulliford, Sarah, Hurkmans, Coen, Just, Uwe, Krause, Mechthild, Lambin, Philippe, Langendijk, Johannes A., Lewensohn, Rolf, Luehr, Armin, Maingon, Philippe, Masucci, Michele, Niyazi, Maximilian, Poortmans, Philip, Simon, Monique, Schmidberger, Heinz, Spezi, Emiliano

, Stuschke, Martin, Valentini, Vincenzo, Verheij, Marcel, Whitfield, Gillian, Zackrisson, Bjoern, Zips, Daniel and Baumann, Michael 2014. Creating a data exchange strategy for radiotherapy research: Towards federated databases and anonymised public datasets. Radiotherapy and Oncology 113 (3) , pp. 303-309. 10.1016/j.radonc.2014.10.001

Soe, Shwe, Martindale, Nick, Constantinou, Chris and Robinson, Michael Richard 2014. Mechanical characterisation of Duraform® Flex for FEA hyperelastic material modelling. Polymer Testing 34 , pp. 103-112. 10.1016/j.polymertesting.2014.01.004

Soe, Shwe and Eyers, Daniel Roy

2014. FEA support structure generation for the additive manufacture of CastForm polystyrene patterns. Polymer Testing 33 , pp. 187-197. 10.1016/j.polymertesting.2013.08.009

Soe, Shwe, Eyers, Daniel Roy

, Le, Chi Hieu and Romli, Awanis 2014. Additive tooling for tube hydroforming. Key Engineering Materials 572 , pp. 269-272. 10.4028/www.scientific.net/KEM.572.269

Song, Y.Z, Bowen, C.R., Kim, Hyunsun Alicia

, Nassehi, A, Padget, J.A, Gathercole N, N. and Dent, N. 2014. Non-invasive damage detection in beams using marker extraction and wavelets. Mechanical Systems and Signal Processing 49 (1-2) , pp. 13-23. 10.1016/j.ymssp.2013.12.011

Song, Yi-Zhe, Bowen, Chris R, Kim, Alicia

, Nassehi, Aydin, Padget, Julian and Gathercole, Nick 2014. Virtual visual sensors and their application in structural health monitoring. Structural Health Monitoring 13 (3) , pp. 251-264. 10.1177/1475921714522841

Springhetti, Roberta, Bortot, Eliana, deBotton, Gal and Gei, Massimiliano

2014. Optimal energy-harvesting cycles for load-driven dielectric generators in plane strain. IMA Journal of Applied Mathematics 79 (5) , pp. 929-946. 10.1093/imamat/hxu025

Srivastava, Pallavee, Braganca, Judith M. and Kowshik, Meenal 2014. In vivo synthesis of selenium nanoparticles by Halococcus salifodinae BK18 and their anti-proliferative properties against HeLa cell line. Biotechnology Progress 30 (6) , pp. 1480-1487. 10.1002/btpr.1992

Srivastava, Prashant K., Han, Dawei, Rico-Ramirez, Miguel A., Bray, Michaela

, Islam, Tanvir, Gupta, Manika and Dai, Qiang 2014. Estimation of land surface temperature from atmospherically corrected LANDSAT TM image using 6S and NCEP global reanalysis product. Environmental Earth Sciences 72 (12) , pp. 5183-5196. 10.1007/s12665-014-3388-1

Steer, Julian Mark

, Grainger, C., Griffiths, Anthony John, Griffiths, Martyn, Heinrich, Tobias and Hopkins, Andrew 2014. Characterisation of BOS steelmaking dust and techniques for reducing zinc contamination. Ironmaking and Steelmaking 41 (1) , pp. 61-66. 10.1179/1743281213Y.0000000106

Steer, Julian mark

, Griffiths, Anthony John, Heinrich, Tobias, Thomas, A. and Barnes, C. 2014. Correlation of BOS process variables with dust mass formation and zinc content. Ironmaking and Steelmaking 41 (7) , pp. 554-560. 10.1179/1743281213Y.0000000152

Stoesser, Thorsten

2014. Large-eddy simulation in hydraulics: Quo Vadis? Journal of Hydraulic Research 52 (4) , pp. 441-452. 10.1080/00221686.2014.944227

Stupakov, Oleksandr and Melikhov, Yevgen

2014. Influence of magnetizing and filtering frequencies on Barkhausen noise response. IEEE Transactions on Magnetics 50 (4) , 6100104. 10.1109/TMAG.2013.2291933

Suarez, M., Garcia Rocha, Victoria

, Fernandez, A., Menendez, J.L. and Torrecillas, R. 2014. Synthesis and processing of spinel powders for transparent ceramics. Ceramics International 40 (3) , pp. 4065-4069. 10.1016/j.ceramint.2013.08.060

Sun, Jian, Lin, Binliang

, Li, Kaiming and Jiang, Guoqiang 2014. A modelling study of residence time and exposure time in the Pearl River Estuary, China. Journal of Hydro-environment Research 8 (3) , pp. 281-291. 10.1016/j.jher.2013.06.003

Syred, Nicholas, Giles, Anthony

, Lewis, Jamie Peter, Abdulsada, Mohammed H., Valera Medina, Agustin

, Brousseau, Emmanuel Bruno Jean Paul

and Griffiths, Anthony John 2014. Effect of inlet and outlet configurations on blow-off and flashback with premixed combustion for methane and a high hydrogen content fuel in a generic swirl burner. Applied Energy 116 , pp. 288-296. 10.1016/j.apenergy.2013.11.071

Talebi, Hossein, Silani, Mohammad, Bordas, Stephane Pierre Alain

, Kerfriden, Pierre

and Rabczuk, Timon 2014. A computational library for multiscale modeling of material failure. Computational Mechanics 53 (5) , pp. 1047-1071. 10.1007/s00466-013-0948-2

Thai, Chien H., Ferreira, A. J. M., Bordas, Stephane Pierre Alain

, Rabczuk, T. and Nguyen-Xuan, H. 2014. Isogeometric analysis of laminated composite and sandwich plates using a new inverse trigonometric shear deformation theory. European Journal of Mechanics - A/Solids 43 , pp. 89-108. 10.1016/j.euromechsol.2013.09.001

Thai, Chien H., Kulasegaram, S.

, Tran, Loc V. and Nguyen-Xuan, H. 2014. Generalized shear deformation theory for functionally graded isotropic and sandwich plates based on isogeometric approach. Computers and Structures 141 , pp. 94-112. 10.1016/j.compstruc.2014.04.003

Thomas, Evan L. H., Mandal, Soumen

and Williams, Oliver Aneurin

2014. Silica based polishing of {100} and {111} single crystal diamond. Science and Technology of Advanced Materials 15 (3) , pp. 1-7. 10.1088/1468-6996/15/3/035013

Thomas, Andrew J., Ringwald, Kath, Parfitt, Scott, Davies, Alan and John, Elwyn Graham 2014. An empirical analysis of Lean six sigma implementation in SMEs - a migratory perspective. International Journal of Quality and Reliability Management 31 (8) , pp. 888-905.

Thomas, Hywel R.

, Vardon, Philip J. and Cleall, Peter J.

2014. Three-dimensional behaviour of a prototype radioactive waste repository in fractured granitic rock. Canadian Geotechnical Journal 51 (3) , pp. 246-259. 10.1139/cgj-2013-0094

Todorov, Diman and Setchi, Rossitza

2014. Time-efficient estimation of conditional mutual information for variable selection in classification. Computational Statistics and Data Analysis 72 , pp. 105-127. 10.1016/j.csda.2013.10.026

Tripathy, Snehasis

, Bag, Ramakrishna and Thomas, Hywel R.

2014. Effect of Stern-layer on the compressibility behaviour of bentonites. Acta Geotechnica 9 (6) , pp. 1097-1109. 10.1007/s11440-013-0222-y

Tripathy, Snehasis

, Bag, Ramakrishna and Thomas, Hywel Rhys

2014. Effects of post-compaction residual lateral stress and electrolyte concentration on swelling pressures of a compacted bentonite. Geotechnical and Geological Engineering 32 (4) , pp. 749-763. 10.1007/s10706-014-9754-7

Tripathy, Snehasis

, Tadza, Mohd Yuhyi M. and Thomas, Hywel Rhys

2014. Soil-water characteristic curves of clays. Canadian Geotechnical Journal 51 (8) , pp. 869-883. 10.1139/cgj-2013-0089

Ulmeanu, Magdalena, Petkov, Petko Vladev

, Hirshy, Hassan

2014. Formation of ordered arrays of Si and GaAs nanostructures by single-shot laser irradiation in near-field at the solid/liquid interface. Materials Research Express 1 (1) , 015030. 10.1088/2053-1591/1/1/015030

Vai, Alex T., Kuznetsov, Vladimir L., Jain, Himanshu, Slocombe, Daniel Rhys

, Rashidi, Nazanin, Pepper, Michael and Edwards, Peter P. 2014. The Transition to the metallic state in polycrystalline n-type doped ZnO thin films. Zeitschrift für anorganische und allgemeine Chemie (Journal of Inorganic and General Chemistry) 640 (6) , pp. 1054-1062. 10.1002/zaac.201400042

Vardon, Philip James, Nicholson, Duncan, Chen, Qing, Masum, Shakil Al

and Thomas, Hywel Rhys

2014. Simulation of repository gas migration in a bentonite buffer. Proceedings of the Institution of Civil Engineers Engineering and Computational Mechanics 167 (1) , pp. 13-22. 10.1680/eacm.12.00018

Vazquez, Marisol, Evans, Bronwen A. J.

, Riccardi, Daniela

, Evans, Sam L.

, Ralphs, Jim R.

, Dillingham, Christopher Mark and Mason, Deborah J.

2014. A new method to investigate how mechanical loading of osteocytes controls osteoblasts. Frontiers in Endocrinology 5 , 208. 10.3389/fendo.2014.00208

Vigueras Zuniga, Marco Osvaldo, Valera Medina, Agustin

, Syred, Nicholas and Bowen, Philip John

2014. High momentum flow region and central recirculation zone interaction in swirling flows. Ingnieria Mecanica Tecnologia y Desarollo 4 (6) , pp. 195-204.

Vigueras-Zuniga, Marco Osvaldo, Valera Medina, Agustin

, Syred, Nicholas and De La Rosa Urbalejo, Daniel 2014. Flashback avoidance in swirling flow burners. Ingenieria, Investigacion y Tecnoloigia 15 (4) , pp. 603-614. 10.1016/S1405-7743(14)70658-4

Villatoro, M., Silva, R., Méndez, F.J., Zanuttigh, B., Pan, Shunqi

, Trifonova, E., Losada, I.J., Izaguirre, C., Simmonds, D., Reeve, D.E., Mendoza, E., Martinelli, L., Formentin, S.M., Galiatsatou, P. and Eftimova, P. 2014. An approach to assess flooding and erosion risk for open beaches in a changing climate. Coastal Engineering 87 , pp. 50-76. 10.1016/j.coastaleng.2013.11.009

Wang, Bin, Li, Haijiang

, Bradley, Alex

and Ong, Hoang 2014. BIM based virtual environment for fire emergency evacuation. The Scientific World Journal 2014 , 589016. 10.1155/2014/589016

Wang, Dan, Ge, Shaoyun, Jia, Hongjie, Wang, Chengshan, Zhou, Yue

, Lu, Ning and Kong, Xiangyu 2014. A demand response and battery storage coordination algorithm for providing microgrid tie-line smoothing services. IEEE Transactions on Sustainable Energy 5 (2) , pp. 476-486. 10.1109/TSTE.2013.2293772

Ward, M. B., Dean, M. C., Stevenson, R. M., Bennett, A. J.

, Ellis, D. J. P., Cooper, K., Farrer, I., Nicoll, C. A., Ritchie, D. A. and Shields, A. J. 2014. Coherent dynamics of a telecom-wavelength entangled photon source. Nature Communications 5 , 3316. 10.1038/ncomms4316

Weber, Hans, Haas, Martin, Kokorin, Denis, Gallichan, Daniel

, Hennig, Juergen and Zaitsev, Maxim 2014. Local shape adaptation for curved slice selection. Magnetic Resonance in Medicine 72 (1) , pp. 112-123. 10.1002/mrm.24906

Weber, Hans, Schultz, Gerrit, Gallichan, Daniel

, Hennig, Juergen and Zaitsev, Maxim 2014. Local field of view imaging for alias-free undersampling with nonlinear spatial encoding magnetic fields. Magnetic Resonance in Medicine 71 (3) , pp. 1002-1014.

Whitby, Benjamin and Ugalde Loo, Carlos Ernesto

2014. Performance of pitch and stall regulated tidal stream turbines. IEEE Transactions on Sustainable Energy 5 (1) , pp. 64-72. 10.1109/TSTE.2013.2272653

Williams, Eleri, Brousseau, Emmanuel Bruno Jean Paul

and Rees, Andrew 2014. Nanosecond Yb fibre laser milling of aluminium: effect of process parameters on the achievable surface finish and machining efficiency. International Journal of Advanced Manufacturing Technology 74 (5-8) , pp. 769-780. 10.1007/s00170-014-6038-6

Williams, Jonathan, Theobald, Peter

and Jones, Michael David

2014. Does the presence of a vertical barrier influence sagittal spinal curvature or range of motion in young females? Journal of Back and Musculoskeletal Rehabilitation 27 (1) , pp. 71-75. 10.3233/BMR-130421

Wilson, J. W., Karimian, N., Liu, J.

, Yin, W., Davis, C. L. and Peyton, A. J. 2014. Measurement of the magnetic properties of P9 and T22 steel taken from service in power station. Journal of Magnetism and Magnetic Materials 360 , pp. 52-58. 10.1016/j.jmmm.2014.01.057

Witschey, Walter R. T., Littin, Sebastian, Cocosco, Chris A., Gallichan, Daniel

, Schultz, Gerrit, Weber, Hans, Welz, Anna, Hennig, Juergen and Zaitsev, Maxim 2014. Stages: Sub-Fourier dynamic shim updating using nonlinear magnetic field phase preparation. Magnetic Resonance in Medicine 71 (1) , pp. 57-66. 10.1002/mrm.24625

Wong, Johnny, Wang, Xianyin, Li, Heng, Chan, Greg and Li, Haijiang

2014. A review of cloud-based BIM technology in the construction sector. The Journal of Information Technology in Construction 19 , pp. 281-291.

Wright, Jonathan A., Brownlee, Alexander E. I., Mourshed, Monjur

and Wang, Mengchao 2014. Multi-objective optimization of cellular fenestration by an evolutionary algorithm. Journal of Building Performance Simulation 7 (1) , pp. 33-51. 10.1080/19401493.2012.762808

Xia, Junqiang, Falconer, Roger A.

, Wang, Yejiang and Xiao, Xuanwei 2014. New criterion for the stability of a human body in floodwaters. Journal of Hydraulic Research 52 (1) , pp. 93-104. 10.1080/00221686.2013.875073

Xia, Junqiang, Falconer, Roger Alexander

, Xiao, Xuanwei and Wang, Yejiang 2014. Criterion of vehicle stability in floodwaters based on theoretical and experimental studies. Natural Hazards 70 (2) , pp. 1619-1630. 10.1007/s11069-013-0889-2

Xie, Zhihua

2014. Numerical modelling of wind effects on breaking solitary waves. European Journal of Mechanics - B/Fluids 43 , pp. 135-147. 10.1016/j.euromechflu.2013.08.001

Xie, Zhihua

, Lin, Binliang

2014. Turbulence characteristics in free-surface flow over two-dimensional dunes. Journal of Hydro-Environment Research 8 (3) , pp. 200-209. 10.1016/j.jher.2014.01.002

Xie, Zhihua

, Pavlidis, Dimitrios, Percival, James R., Gomes, Jefferson L.M.A., Pain, Christopher C. and Matar, Omar K. 2014. Adaptive unstructured mesh modelling of multiphase flows. International Journal of Multiphase Flow 67 , pp. 104-110. 10.1016/j.ijmultiphaseflow.2014.08.002

Yang, Dongmin, Sarhosis, Vasilis and Sheng, Yong 2014. Thermal-mechanical modelling around the cavities of underground coal gasification. Journal of the Energy Institute 87 (4) , pp. 321-329. 10.1016/j.joei.2014.03.029

Yang, Chunfeng, Li, Haijiang

, Petri, Ioan

, Yuce, Baris

, Chen, Biaosong and Jayan, Bejay 2014. High throughput computing based distributed genetic algorithm for building energy consumption optimization. Energy and Buildings 76 , pp. 92-101. 10.1016/j.enbuild.2014.02.053

Yin, Shuohui, Hale, Jack S., Yu, Tiantang, Quoc Bui, Tinh and Bordas, Stephane Pierre Alain

2014. Isogeometric locking-free plate element: A simple first order shear deformation theory for functionally graded plates. Steel && Composite Structures 118 , pp. 121-138. 10.1016/j.compstruct.2014.07.028

Yokoi, Kensuke

2014. A density-scaled continuum surface force model within a balanced force formulation. Journal of Computational Physics 278 , pp. 221-228. 10.1016/j.jcp.2014.08.034

You, Jong-Burn, Lee, Wook-Jae

, Won, Dongshik and Yu, Kyoungsik 2014. Multiband perfect absorbers using metal-dielectric films with optically dense medium for angle and polarization insensitive operation. Optics Express 22 (7) , pp. 8339-8348. 10.1364/OE.22.008339

Yuan, S., Ye, K., Xiao, C., Kennedy, David

and Williams, F. W. 2014. Solution of regular second- and fourth-order Sturm-Liouville problems by exact dynamic stiffness method analogy. Journal of Engineering Mathematics 86 (1) , pp. 157-173. 10.1007/s10665-013-9646-5

Yuce, Baris

, Li, Haijiang

, Petri, Ioan

, Jayan, Bejay and Yang, Chunfeng 2014. Utilizing artificial neural network to predict energy consumption and thermal comfort level: an indoor swimming pool case study. Energy and Buildings 80 , pp. 45-56. 10.1016/j.enbuild.2014.04.052

Yuce, Baris

, Mastrocinque, Ernesto, Lambiase, Alfredo, Packianather, Michael S.

and Truong Pham, Duc 2014. A multi-objective supply chain optimisation using enhanced Bees Algorithm with adaptive neighbourhood search and site abandonment strategy. Swarm and Evolutionary Computation 18 , pp. 71-82. 10.1016/j.swevo.2014.04.002

Yuce, Baris

, Mastrocinque, Ernesto, Packianather, Michael Sylvester

, Pham, Duc, Lambiase, Alfredo and Fruggiero, Fabio 2014. Neural network design and feature selection using principal component analysis and Taguchi method for identifying wood veneer defects. Production & Manufacturing Research: An Open Access Journal 2 (1) , pp. 291-308. 10.1080/21693277.2014.892442

Zaraki, Abolfazl

, Mazzei, Daniele, Giuliani, Manuel and De Rossi, Danilo 2014. Designing and evaluating a social gaze-control system for a humanoid robot. IEEE Transactions on Human-Machine Systems 44 (2) , pp. 157-168. 10.1109/THMS.2014.2303083

Zarli, A., Rezgui, Yacine

, Belziti, D. and Duce, E. 2014. Water analytics and intelligent sensing for demand optimised management: The WISDOM vision and approach. Procedia Engineering 89 , pp. 1050-1057. 10.1016/j.proeng.2014.11.224

Zhang, Lin, Chen, Shenliang, Pan, Shunqi

, Yi, Liang and Jiang, Chao 2014. Sediment variability and transport in the littoral area of the abandoned Yellow River Delta, northern Jiangsu. Journal of Geographical Sciences 24 (4) , pp. 717-730. 10.1007/s11442-014-1115-1

Zhou, Juntao, Pan, Shunqi

and Falconer, Roger A.

2014. Optimization modelling of the impacts of a Severn Barrage for a two-way generation scheme using a Continental Shelf model. Renewable Energy 72 , pp. 415-427. 10.1016/j.renene.2014.07.036

Zhou, Juntao, Pan, Shunqi

2014. Effects of open boundary location on the far-field hydrodynamics of a Severn Barrage. Ocean Modelling 73 , pp. 19-29. 10.1016/j.ocemod.2013.10.006

Zhou, Juntao, Falconer, Roger Alexander

and Lin, Binliang

2014. Refinements to the EFDC model for predicting the hydro-environmental impacts of a barrage across the Severn Estuary. Renewable Energy 62 , pp. 490-505. 10.1016/j.renene.2013.08.012

Zhou, L., Liu, J.

, Hao, X. J., Strangwod, M., Peyton, A. J. and Davis, C. L. 2014. Quantification of the phase fraction in steel using an electromagnetic sensor. NDT and E International 67 , pp. 31-35. 10.1016/j.ndteint.2014.06.007

Zhu, D.Y., Zhang, Y.H., Kennedy, David

and Williams, F.W. 2014. Stochastic vibration of the vehicle-bridge system subject to non-uniform ground motions. Vehicle System Dynamics 52 (3) , pp. 410-428. 10.1080/00423114.2014.886707

Zhu, H. X.

, Zhang, H. C., You, J. F., Kennedy, D.

, Wang, Z. B., Fan, T. X. and Zhang, D. 2014. The elastic and geometrical properties of micro- and nano-structured hierarchical random irregular honeycombs. Journal of Materials Science 49 (16) , pp. 5690-5702. 10.1007/s10853-014-8288-y

Zhu, Hanxing

, Balint, Daniel and Guo, Zaoyang 2014. Theoretical analysis and computational simulation of advanced structured materials. Advances in Condensed Matter Physics 2014 , 367916. 10.1155/2014/367916

Zhu, Hanxing

, Zhang, P., Balint, D., Thorpe, S. M., Elliott, J. A., Windle, A. H. and Lin, J. 2014. The effects of regularity on the geometrical properties of Voronoi tessellations. Physica A: Statistical Mechanics and its Applications 406 , pp. 42-58. 10.1016/j.physa.2014.03.012

Zhuang, Qian D, Anyebe, Ezekiel A

, Sanchez, Ana M, Rajpalke, Mohana K, Veal, Tim D, Zhukov, Alexander, Robinson, Benjamin J, Anderson, Frazer, Kolosov, Oleg and Fal?ko, Vladimir 2014. Graphitic platform for self-catalysed InAs nanowires growth by molecular beam epitaxy. Nanoscale Research Letters 9 (1) , 321. 10.1186/1556-276X-9-321

Book

Bordas, Stephane Pierre Alain

, ed. 2014. Advances in applied mechanics. Elsevier.

Rabczuk, Timon, Bordas, Stephane Pierre Alain

and Zi, Goangseup, eds. 2014. Computational methods for fracture: volume 14 [Guest Edition of journal]. Hindawi Publishing Corporation.

Setchi, Rossitza M.

, Howlett, R. J., Naim, Mohamed Mohamed

and Seinz, H. 2014. KES transactions on sustainable design and manufacturing. vol. 1. London: Future Technology Press.

Book Section

Amabile, Alessia, Balzano, Brunella

, Caruso, Marco and Tarantino, Alessandro 2014. A conceptual model for water-limited evapotranspiration taking into account root depth, root density, and vulnerability to xylem cavitation. Khalili, Nasser, Russell, Adrian and Khoshghalb, Arman, eds. Unsaturated Soils: Research & Applications, CRC Press,

Balzano, Brunella

, Amabile, Alessia, Caruso, Marco and Tarantino, Alessandro 2014. A numerical study of hydrological effects of vegetation on slope stability. Khalili, Nasser, Russell, Adrian and Khoshghalb, Arman, eds. Unsaturated Soils: Research & Applications, CRC Press, pp. 1249-1256.

Borodich, Feodor M.

2014. The Hertz-type and adhesive contact problems for depth-sensing indentation. Bordas, Stephane P. A., ed. Advances in Applied Mechanics, Vol. 47. Academic Press, Inc., pp. 225-366. (10.1016/B978-0-12-800130-1.00003-5)

Cleall, Peter John

, Munoz Criollo, Jose and Rees, Stephen William

2014. Assessment and representation of thermal surface fluxes in soils. Oka, Fusao, Murakami, Akira, Uzuoka, Ryosuke and Kimoto, Sayuri, eds. Computer Methods and Recent Advances in Geomechanics, CRC Press, pp. 1321-1326. (10.1201/b17435-233)

Gao, Min

2014. Improving thermoelectric cooling by light emission. Amaldi, Andrea and Tang, Francis, eds. Proceedings of the 11th European Conference on Thermoelectrics, Springer, p. 183. (10.1007/978-3-319-07332-3_21)

Howell, Shaun Kevin, Rezgui, Yacine

and Li, Haijiang

2014. Can the human body help us deliver adaptable and resilient buildings? Mahdavi, Ardeshir, Martens, Bob and Scherer, Raimar, eds. eWork and eBusiness in Architecture, Engineering and Construction: ECPPM 2014, CRC Press, pp. 643-648.

Jefferson, Anthony Duncan

, Mihai, Iulia Carmen

and Lyons, Paul 2014. An approach to modelling smoothed crack closure and aggregate interlock in the finite element analysis of concrete structures. Bícanić, Nenad, Mang, Herbert, Meschke, Günther and de Borst, René, eds. Computational Modelling of Concrete Structures, CRC Press, pp. 219-223.

Kara, S., Mulahasan, S., Stoesser, Thorsten

and Sturm, T. W. 2014. Water surface response to flow through bridge openings. Schleiss, Anton J., De Cesare, Giovanni, Franca, Mario J. and Pfister, Michael, eds. River Flow 2014, CRC Press, pp. 693-699.

Liang, Jun

and Feng, Chunmei 2014. AC and DC generators to improve the integration of offshore wind farms into electricity transmission and distribution networks. Bessede, Jean-Luc, ed. Eco-friendly innovations in electricity transmission and distribution networks, Woodhead Publishing, pp. 263-291.

Saeed, N. M. and Kwan, Alan

2014. Concepts for morphing aerofoil sections using pantographic structures. De Temmerman, N. and Brebbia, C. A., eds. Mobile and Rapidly Assembled Structures, Vol. IV. Southampton: WIT Press, pp. 279-289.

Yuce, Baris

, Mastrocinque, Ernesto, Packianather, Michael Sylvester

, Lambiase, Alfredo and Pham, Duc Truong 2014. The Bees Algorithm and its applications. Vasant, Pandian, ed. Handbook of Research on Artificial Intelligence Techniques and Algorithms, IGI Global, (10.4018/978-1-4666-7258-1.ch004)

Conference or Workshop Item

A Mokhti, Zulhazmi Bin, Tasker, Paul J.

2014. Correlation analysis between a VNA-based passive load pull system and an oscilloscope-based active load pull system: a case study. Presented at: 83rd ARFTG Microwave Measurement Conference 2014, Tampa, USA, 6 June 2014. 83rd ARFTG Microwave Measurement Conference (ARFTG), 2014. pp. 1-4. 10.1109/ARFTG.2014.6899535

A Mokhti, Zulhazmi Bin, Tasker, Paul J.

2014. Using waveform engineering to optimize class-F power amplifier performance in an envelope tracking architecture. Presented at: 44th European Microwave Conference (EuMC) 2014, Rome, Italy, 6-9 October 2014. 44th European Microwave Conference (EuMC 2014). IEEE, pp. 1301-1304. 10.1109/EuMC.2014.6986682

Abduljabar, Ali, Porch, Adrian

and Barrow, David

2014. Real-time measurements of size, speed, and dielectric property of liquid segments using a microwave microfluidic sensor. Presented at: 2014 IEEE MTT-S International Microwave Symposium (IMS2014), Tampa, FL, USA, 1-6 June 2014. 2014 IEEE MTT-S International Microwave Symposium (IMS2014). 2014 IEEE MTT-S INTERNATIONAL MICROWAVE SYMPOSIUM (IMS). IEEE, pp. 1-4.

Abeysekera, Muditha

, Rees, Marc and Wu, Zianzhong

2014. Simulation and analysis of gas networks with decentralized fuel injection. Presented at: International Conference on Applied Energy, ICAE 2014, Taipei, Taiwan, 30 May -2 June 2014.

Adhikari, Dia, Wu, Jianzhong

and O'Malley, George 2014. Real time closed-loop test rig for decentralized control of smart distribution networks. Presented at: International Conference on Applied Energy, ICAE 2014, Taipei, Taiwan, 30 May -2 June 2014.

Ahmadian, Reza

and Bray, Samuel 2014. Sensitivity study of modelling of Severn Barrage performance. Presented at: 1st International Conference on Renewable Energies Offshore, Lisbon, Portugal, 24-26 November 2014.

Al-Azzawi, Ahmad

, McCrory, John, Kawashita, Luiz

, Featherston, Carol

and Holford, Karen

2014. Delamination characteristics of splices and doublers in glare laminates during buckling. Presented at: 11th World Congress on Computational Mechanics (WCCM XI), Barcelona,Spain, 25 July 2014. S65-S65.

Al-Hamood, Amjad, Clarke, Alastair

and Evans, Henry Peredur

2014. Experimental determination of heat partition in elastohydrodynamic contacts. Presented at: 41st Leeds-Lyon Symposium on Tribology - Integrated Tribology, Leeds, England, 2-5 September 2014.

Al-Jumaili, Safaa Kh., Eaton, Mark Jonathan

, McCrory, John and Pullin, Rhys

2014. Damage characterisation in composite materials under buckling test using acoustic emission waveform clustering technique. Presented at: The 53rd Annual Conference of The British Institute of Non-Destructive Testing, Manchester, UK, 9-11 September 2014.

Al-Jumaili, Safaa Khairry, Eaton, Mark

and Pullin, Rhys

2014. A Parameter Correction Technique (PCT) for acoustic emission characterisation in large-scale composites. Presented at: 31st European Conference on Acoustic Emission Testing (EWGAE), Dresden, Germany, 3-5 September 2014. pp. 1-8.

Al-Saadi, Ahmed, Setchi, Rossitza

, Hicks, Yulia Alexandrovna

and Allen, Stuart Michael

2014. Multi-rate medium access protocol based on reinforcement learning. Presented at: 2014 IEEE International Conference on Systems, Man and Cybernetics (SMC), San Diego, CA, 5-8 October 2014. Systems, Man and Cybernetics (SMC), 2014 IEEE International Conference on. IEEE, pp. 2875-2880. 10.1109/SMC.2014.6974366

Albano, Maurizio

, Haddad, A., Griffiths, H., Waters, R. T., Hicks, Y. A. and Sarathi, R. 2014. Dry-band and discharge activity characterization using visual and IR data analysis. Presented at: 2014 International Conference on High Voltage Engineering and Application (ICHVE), Poznan, Poland, 8 - 11 September 2014. 2014 International Conference on High Voltage Engineering and Application (ICHVE). IEEE, pp. 1-4. 10.1109/ICHVE.2014.7035414

Aldossary, Naief, Rezgui, Yacine

and Kwan, Alan Shu Ken

2014. Energy consumption patterns for domestic buildings in hot climates using Saudi Arabia as case study field: multiple case study analyses. Presented at: 2014 International Conference on Computing in Civil and Building Engineering, Orlando, Florida, 23-25 June 2014. Published in: Flood, Ian and Issa, Raymond Issa eds. Computing in Building and Civil Engineering (2014). American Society of Civil Engineers, pp. 1986-1993. 10.1061/9780784413616.246

Aldoumani, Anoor, Williams, Tudor, Lees, Jonathan

and Tasker, Paul J.

2014. Enhanced vector calibration of load-pull measurement systems. Presented at: 83rd ARFTG Microwave Measurement Conference 2014, Tampa, FL, USA, 6 June 2014. ARFTG Microwave Measurement Conference (ARFTG), 2014 83rd. IEEE, pp. 1-4. 10.1109/ARFTG.2014.6899508

Aldoumani, Noor, Kutrowski, Tomasz, Barnes, John, Meydan, Turgut

and Erichsen, Jonathan Thor

2014. Instrumentation to investigate the magnetoreception of homing pigeons by using applied magnetic fields. Presented at: 2014 IEEE Conference on Sensors, Valencia, Spain, 2-5 November 2014. SENSORS, 2014 IEEE. IEEE, pp. 1547-1550. 10.1109/ICSENS.2014.6985311

Alreshidi, Eissa

, Mourshed, Monjur

and Rezgui, Yacine

2014. Exploring the need for a BIM governance model: UK construction practitioners' perceptions. Presented at: 2014 International Conference on Computing in Civil and Building Engineering, Orlando, Florida, 23-25 June 2014. Published in: Issa, Raymond Issa and Flood, Ian eds. Computing in Civil and Building Engineering. Reston, VA.: American Society of Civil Engineers, pp. 151-158. 10.1061/9780784413616.020

Alreshidi, Eissa

and Mourshed, Monjur

2014. Requirements for developing BIM governance model: Practitioners’ perception. Presented at: 7th Saudi Students Conference in the UK, Edinburgh International Conference Centre (EICC) Edinburgh, 1-2 February 2014. 7th Saudi Students Conference in the UK. Edinburgh International Conference Centre (EICC) Edinburgh: Saudi Students Conference in the UK (SSC),

Alyami, Saleh H., Rezgui, Yacine

and Kwan, Alan Shu Ken

2014. The process of adapting a sustainable building assessment method worldwide: SEAM, a case study. Presented at: 2014 International Conference on Computing in Civil and Building Engineering, Orlando, Florida, 23-25 June 2014. Published in: Flood, Ian and Raymond, Issa Issa eds. Computing in Civil and Building Engineering (2014). American Society of Civil Engineers, pp. 1978-1985. 10.1061/9780784413616.245

Angeloudis, Athanasios

, Ahmadian, Reza

and Bockelmann-Evans, Bettina Nicole

2014. Numerical modelling of a tidal lagoon along the North Wales coast. Presented at: 1st International Conference on Renewable Energies Offshore, Lisbon, Portugal, 24-26 November 2014.

Angeloudis, Athanasios

, Stoesser, Thorsten

2014. Disinfection kinetics in CFD modelling of solute transport in contact tanks. Presented at: 3rd European IAHR Congress, Porto, Portugal, 14-16 April 2014.

Asikhia, Obokhai Kess, Setchi, Rossitza

, Hicks, Yulia Alexandrovna

and Walters, Andrew 2014. Exploring sustainable design using image schemas. Presented at: International Conference on Sustainable Design and Manufacturing SDM'14,, Cardiff, UK, 28-30 April 2014. Sustainable Design and Manufacturing Conference (SDM-14). pp. 67-78.

Baej, Hesham, Valera Medina, Agustin

, Bowen, Philip

, Syred, Nicholas, O'Doherty, Timothy

2014. Impacts on blowoff by a variety of CRZs using various gases for gas turbines. Presented at: ICAE 2014 (International Conference on Applied Energy), Taipei, Taiwan, 30-2 June 2014.

Balasubramaniam, Senthooran, Liang, Jun

and Ugalde Loo, Carlos

2014. An IGBT based series power flow controller for multi-terminal HVDC transmission. Presented at: 49th International Universities' Power Engineering Conference (UPEC), Cluj-Napoca, Romania, 2 - 5 September 2014.

Belcher, Allan 2014. What are the limits to increasing the dynamic range of RF ADCS? Presented at: ARMMS Conference 2014, Bedfordshire, England, UK, 17-18 November 2014. ARMMS Conference Digest.

Bennasar, Mohamed, Setchi, Rossitza

, Hicks, Yulia

and Bayer, Antony James

2014. Cascade classification for diagnosing dementia. Presented at: 2014 IEEE International Conference on Systems, Man and Cybernetics (SMC), San Diego, CA, USA, 5-8 October 2014. 2014 IEEE International Conference on Systems, Man and Cybernetics (SMC). pp. 2535-2540. 10.1109/SMC.2014.6974308

Betts, David N., Bowen, Christopher R., Inman, Daniel J., Weaver, Paul M. and Kim, Alicia

2014. Investigation of geometries of bistable piezoelectric-laminate plates for vibration-based energy harvesting. Presented at: SPIE Conference on Smart Structures and Materials, San Diego, CA, USA, 10-13 March 2014. Published in: Liao, Wei-Hsin ed. Proceedings of SPIE - The International Society for Optical Engineering. ACTIVE AND PASSIVE SMART STRUCTURES AND INTEGRATED SYSTEMS 2014. , vol.9057 SPIE, 10.1117/12.2044771

Bigot, Samuel

, Lacan, Franck Andre

, Hirshy, Hassan

, Petkov, Petko Vladev

, Babenko, M., Castro, G. G., Sweeney, J., Ugail, H. and Whiteside, B. 2014. Micro and nano structuring of sapphire for Micro Injection process investigation. Presented at: 9th International Conference on Micromanufacturing, Singapore, China, 25-28 March 2014. 9th International Conference on MicroManufacturing.

Bigot, Samuel

, Pernot, Jean-Philippe, D’Urso, Gianluca, Merla, Christina, Peyroutet, Jeremy and Surleraux, Anthony 2014. Estimating the exchanged energy distribution in micro-EDM. Presented at: 9th International Conference on MicroManufacturing, Singapore, China, 25-28 March 2014.

Bomminayuni, S. and Stoesser, Thorsten

2014. Dispersion of a passive scalar in turbulent open channel flow. Presented at: 7th International Conference on Fluvial Hydraulics (River Flow), Lausanne, Switzerland, 3-5 September 2014. Published in: Schleiss, Anton, De Cesare, Giovanni, Franca, Mário J. and Pfister, Michael eds. River flow 2014 : proceedings of the international conference on fluvial hydraulics. Boca Raton: CRC Press, pp. 147-154. 10.1201/b17133-25

Bowen, C. R., Kim, Alicia

and Salo, A. I. T. 2014. Active composites based on bistable laminates. Presented at: ICMAT2013 - 7th International Conference on Materials for Advanced Technologies, Suntec City, Singapore, 30 June – 5 July 2013. Published in: Ezhilvalavan, S. ed. International Conference on Materials for Advanced Technologies (ICMAT2013), Symposium W – Advanced Structural and Functional Materials for Protection. INTERNATIONAL CONFERENCE ON MATERIALS FOR ADVANCED TECHNOLOGIES (ICMAT2013), SYMPOSIUM W - ADVANCED STRUCTURAL AND FUNCTIONAL MATERIALS FOR PROTECTION. Procedia Engineering , vol.75 (75) Elsevier, pp. 140-144.

Braiwish, N. Y., Anayi, F. J., Fahmy, Ashraf and Eldukhri, E. E. 2014. Design optimisation of Permanent Magnet Synchronous Motor for electric vehicles traction using the Bees Algorithm. Presented at: 49th International Universities Power Engineering Conference (UPEC), Cluj-Napoca, Romania, 2-5 September 2014. Power Engineering Conference (UPEC), 2014 49th International Universities. IEEE, pp. 1-5. 10.1109/UPEC.2014.6934742

Bray, Samuel, Ahmadian, Reza

2014. Refinements to turbine representation in modelling the Severn Barrage. Presented at: 3rd European IAHR Congress, Porto, Portugal, 14-16 April 2014.

Burnap, Peter

, Rana, Omer Farooq

, Pauran, Nargis and Bowen, Philip John

2014. Towards real-time probabilistic risk assessment by sensing disruptive events from streamed news feeds. Presented at: 8th IEEE International Conference on Complex, Intelligent and Software Intensive Systems (CISIS 2014), Birmingham City University, Birmingham, UK., 2-4 July 2014. -.

Camarchia, V., Guerrieri, S. Donati, Ghione, G., Pirola, M., Quaglia, R., Moreno Rubio, J. J.

, Loran, B., Palomba, F. and Sivverini, G. 2014. A K-band GaAs MMIC Doherty power amplifier for point-to-point microwave backhaul applications. Presented at: 2014 International Workshop on Integrated Nonlinear Microwave and Millimetre-wave Circuits (INMMiC), Leuven, Belgium, 2-4 April 2014. 2014 International Workshop on Integrated Nonlinear Microwave and Millimetre-wave Circuits (INMMiC). IEEE, p. 1. 10.1109/INMMIC.2014.6815084

Cancar, Leandro, Sanz, David, Hernández, Juan David, del Cerro, Jaime and Barrientos, Antonio 2014. Precision humidity and temperature measuring in farming using newer ground mobile robots. Presented at: ROBOT2013: First Iberian Robotics Conference, Madrid, Spain, 28-29 November 2013. Published in: Armada, Manuel A., Sanfeliu, Alberto and Ferre, Manuel eds. ROBOT2013: First Iberian Robotics Conference. Advances in Robotics, Vol. 1. Advances in Intelligent Systems and Computing Springer, Cham, pp. 443-456. 10.1007/978-3-319-03413-3_32

Cheah, Marc, Liang, Jun

2014. Permanent magnet synchronous generator for wind turbines: modelling, control and inertial frequency response. Presented at: UPEC 2014: International Universities' Power Engineering Conference, Cluj-Napoca, Romania, 2-5 September 2014.

Chen, L., Widger, Phillip

, Elnaddab, K. H., Albano, Maurizio

, Griffiths, Huw and Haddad, Abderrahmane

2014. CF3I gas and its mixtures: potential for electrical insulation. Presented at: Cigre Session 45, Paris, 24-29 August 2014.

Choi, Heungjae

, Cuenca, Jerome A.

, Attard, Gary and Porch, Adrian

2014. A novel concentration detection method of hydrogen peroxide using microwave cavity perturbation technique. Presented at: 44th European Microwave Conference (EuMC) 2014, Rome, Italy, 6-9 October 2014. 44th European Microwave Conference (EuMC 2014). Picastaway, NJ: IEEE, pp. 632-635. 10.1109/EuMC.2014.6986513

Choi, Heungjae

, Cuenca, Jerome

, Hartley, Jon and Porch, Adrian

2014. Observation of change in microwave properties during solid to liquid phase transformation of gallium. Presented at: 2014 International Symposium on Information Technology Convergence (ISITC 2014), Jeonju, Republic of Korea, 30-31 October 2014.

Clark, David

, Mousa, Salah, Griffiths, Huw, Harid, Noureddine

and Haddad, Abderrahmane

2014. Lightning performance analysis of different length rod ground electrodes. Presented at: GROUND2014: International Conference on Grounding and Earthing & 6th International Conference on Lightning Physics and Effects, Manaus, Brazil, 12-16 May 2014.

Clarke, Alastair

, Jamali, Hazim, Weeks, Ingram, Sharif, Khairi, Evans, Henry Peredur

and Snidle, Raymond Walter

2014. The influence of macro and micro geometry on the generation of adverse contact conditions associated with micropitting in gear tooth contacts. Presented at: Gears 2014 technical awareness seminar, Newcastle, England, 20 November 2014.

Clarke, Alastair

, Weeks, Ingram, Evans, Henry Peredur

and Snidle, Raymond

2014. An investigation into mixed lubrication conditions using electrical contact resistance techniques. Presented at: 41st Leeds-Lyon Symposium on Tribology - Integrated Tribology, Leeds, UK, 2 - 5 September 2014.

Coburn, Broderick H., Wu, Zhangming

and Weaver, Paul 2014. Local buckling of blade stiffened variable angle tow panels. Presented at: 55th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, National Harbor, ML, USA, 13-17 January 2014. 10.2514/6.2014-0167

Cockerill, Aaron, Clarke, Alastair

, Bradshaw, Tim, Cole, Phillip and Pullin, Rhys

2014. Damage assessment of rolling element bearings using acoustic emission. Presented at: 16th International Workshop on Experimental Mechanics, Cambridge, UK, 7 - 11 July 2014.

Corr, J., Thompson, K., Weiss, S., McWhirter, John

and Proudler, I. K. 2014. Causality constrained multiple shift sequential matrix diagonalisation for parahermitian matrices. Presented at: 2014 Signal Processing Conference (EUSIPCO), Lisbon, Portugal, 1 - 5 September 2014. 2014 Proceedings of the 22nd European Signal Processing Conference (EUSIPCO). Signal Processing Conference (EUSIPCO), 2014 Proceedings of the 22nd European. IEEE, pp. 1277-1281.

Corr, J., Thompson, K., Weiss, S., McWhirter, John

and Proudler, I. K. 2014. Cyclic-by-row approximation of iterative polynomial EVD Algorithms. Presented at: 2014 Sensor Signal Processing for Defence (SSPD), Edinburgh, UK, 8-9 September 2014. Sensor Signal Processing for Defence (SSPD), 2014. 2014 Sensor Signal Processing for Defence. IEEE, 10.1109/SSPD.2014.6943330

Corr, J, Thompson, K, Weiss, S, McWhirter, John

and Proudler, Ian K. 2014. Maximum energy sequential matrix diagonalisation for parahermitian matrices. Presented at: 2014 Asilomar Conference on Signals, Systems, and Computers,, Pacific Grove, CA, USA, 2-5 November 2014. Proceesings of 2014 Asilomar Conference on Signals, Systems, and Computers,. Proceedings of 2014 Asilomar Conference on Signals, Systems, and Computers,. IEEE,

Corr, Jamie, Thompson, Keith, Weiss, Stephan, McWhirter, John

, Redif, Soydan and Proudler, Ian K. 2014. Multiple shift, maximum element sequential matrix diagonalisation for parahermitian matrices. Presented at: 2014 IEEE Workshop on Statistical Signal Processing (SSP), Gold Coast, Australia, June 29 -July 2 2014. Statistical Signal Processing (SSP), 2014 IEEE Workshop on. Proc IEEE 8th Sensor Array and Multichannel Signal Processing Workshop. IEEE, pp. 312-315. 10.1109/SSP.2014.6884638

Crivelli, Davide

and Guagliano, Mario 2014. Effetto del pre-stress sul comportamento a fatica di elementi intagliati in acciaio inossidabile. Presented at: Atti del 43 Convegno Nazionale AIAS, Bologna, Italy, 9-12 September 2014. AIAS - Assciazione Italiana Analisi delle Sollecitazioni,

Cuenca, Jerome

, Thomas, Evan, Williams, Oliver Aneurin

, Mandal, Soumen

and Porch, Adrian

2014. Broadband microwave measurements of nanodiamond. Presented at: Microwave Conference (APMC), 2014 Asia-Pacific, Sendai, Japan, 4-7 Nov 2014. Microwave Conference (APMC), 2014 Asia-Pacific. pp. 1-3.

Cuenca, Jerome

, Choi, Heungjae

, Hartley, Jon and Porch, Adrian

2014. Microwave detection of photodielectric effects in antimony tin oxide. Presented at: 2014 International Symposium on Information Technology Convergence (ISITC 2014), Jeonju, Republic of Korea, 30-31 October 2014.

Cuenca, Jerome

, Klein, Sylke, Ruger, Reinhold and Porch, Adrian

2014. Microwave complex permeability of magnetite using non-demagnetising and demagnetising cavity modes. Presented at: Microwave Conference (EuMC), 2014 44th European, Rome, Italy, 6-9 Oct 2014. Microwave Conference (EuMC), 2014 44th European. pp. 128-131. 10.1109/EuMC.2014.6986386

Davies, Huw Charles

, Bestebreurtje, E., Faye, I. and Weken, H. 2014. Establishing the transferability of best practice in EV policy across European borders. Presented at: European Electric Vehicle Congress, Brussels, Belgium, 2 - 5 December 2014.

Davies, Huw Charles

, Wells, Peter Erskine

, Nieuwenhuis, Paul Andre Henri Francois, Newman, Daniel

, Chase, A. and Alberts, G. 2014. Aligning industrial, transport and environmental policies for EVs in the low carbon vehicle ecosystem: The example of the UK. Presented at: European Electric Vehicle Congress, Brussels, Belgium, 2 - 5 December 2014.

De Marco, Matteo, Xydas, Erotokritos, Marmaras, Charalampos, Cipcigan, Liana Mirela

, Repetto, Maurizio and Fantino, Maurizio 2014. Technical impacts of electric vehicles charging in an Italian distribution network. Presented at: CIRED Workshop Challenges of Implementing Active Distribution System Management, Rome, Italy, 11-12 June.

Deeb, Rola, Kulasegaram, Sivakumar

and Karihaloo, Bhushan

2014. 3D modelling of the flow of self-compacting concrete with or without steel fibres. Presented at: Symposium on Design, Performance and Use of on Self-Consolidating Concrete, Xiamen, China, 5-8 June 2014. Published in: Shi, C., Ou, Z. and Khayat, K. H, eds. Proc 3rd Symposium on Design, Performance and Use of on Self-Consolidating Concrete (SCC2014). RILEM Publ S.A.R.L. France, p. 31.

Dopico-Gonzalez, Carolina, Whatling, Gemma Marie

and Holt, Catherine Avril

2014. Stress and strain patterns of the proximal tibia in a finite element knee model with varying healthy and osteoarthritic bone stiffness. Presented at: British Orthopaedic Research Society Annual Conference, Bath, UK, 23-24 June 2014.

Du, Dajun, Shang, Lili and Zhao, Wanqing

2014. An online recursive identification method over networks with random packet losses. Presented at: International Conference of Life System Modeling and Simulation (LSMS 2014) and International Conference on Intelligent Computing for Sustainable Energy and Environment (ICSEE 2014), Shanghai, China, 20-23 September 2014. Published in: Fei, Minrui, Peng, Chen, Su, Zhou, Song, Yang and Han, Qinglong eds. Computational Intelligence, Networked Systems and Their Applications. Communications in Computer and Information Science , vol.462 Springer, pp. 449-458. 10.1007/978-3-662-45261-5_47

Duan, Kewei, Padget, Julian and Kim, Alicia

2014. A light-weight framework for bridge-building from desktop to cloud. Presented at: 11th International Conference on Service-Oriented Computing (ICSOC 2013), Berlin, Germany, 2-5 December 2013. Published in: Lomuscio, Alessio R., Nepal, Surya, Patrizi, Fabio, Benatallah, Boualem and Brandić, Ivona eds. Service-Oriented Computing – ICSOC 2013 Workshops. SERVICE-ORIENTED COMPUTING - ICSOC 2013 WORKSHOPS. Lecture Notes in Computer Science , vol.8377 (8377) Springer International Publishing, pp. 308-323. 10.1007/978-3-319-06859-6_28

Elderrat, Haithem, Davies, Huw Charles

2014. Investigation of the foam filled fluid technology for anti-vibration devices. Presented at: Proceedings of the International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2014, London, UK, 1-2 June 2014. Published in: Kumar, Rakesh ed. Proceedings of the International Conference on Proceedings on Advances in Civil, Structural and Mechanical Engineering - CSM 2014. Proceedings of the International Conference on Advances in Civil, Structural and Mechanical Engineering. Santa Barbara, CA: Institute of Research Engineers and Doctors,

Elzowawi, Alseddig, Haddad, Abderrahmane

and Griffiths, Huw 2014. Visualization of electric discharge in porous materials. Presented at: ICHVE conference, Poznan, Poland, 8-11 September 2014.

Etumi, A. A., Anayi, F. J., Fahmy, Ashraf and Eldukhri, E. E. 2014. Auto-cross correlation coefficients used for detecting an internal fault in three phase transformer. Presented at: IEEE 16th International Conference on Harmonics and Quality of Power (ICHQP), Bucharest, Romania, 25-28 May 2014. Harmonics and Quality of Power (ICHQP), 2014 IEEE 16th International Conference on. IEEE, pp. 370-374. 10.1109/ICHQP.2014.6842784

Etumi, A.A.A., Eldukhri, E.E., Anayi, F.J. and Fahmy, Ashraf 2014. New algorithm based on auto-correlation and cross-correlation scheme to detect the internal fault in single phase transformer. Presented at: 12th IET International Conference on Developments in Power System Protection (DPSP 2014), Copenhagen, Denmark, 31 March - 3 April 2014. Developments in Power System Protection (DPSP 2014), 12th IET International Conference on. IEEE, pp. 1-5. 10.1049/cp.2014.0151

Falconer, Roger Alexander

, Huang, Guoxian and Lin, Binliang

2014. Integrated water modelling and management for bathing water compliance. Presented at: Drainage Services Department International Conference 2014, Hong Kong, 12-14 November 2014.

Frost, Carwyn

, Morris, Ceri E., Mason-Jones, Allan

, O'Doherty, Daphne Maria and O'Doherty, Timothy

2014. The effect of tidal flow directionality on tidal turbine performance characteristics. Presented at: 3rd Oxford Tidal Energy Workshop (OTE 2014), Oxford, UK, 7-8 April 2014. Published in: Willden, R. H. J. and Nishino, T. eds. Proceedings of the 3rd Oxford Tidal Energy Workshop. Oxford: University of Oxford, pp. 45-46.

Gay, Russell, Evans, Henry Peredur

, Snidle, Raymond Walter

, Clarke, Alastair

, Bell, Andrew and Colton, Michael 2014. Modelling the wear behaviour of a self-lubricating composite bearing. Presented at: 69th STLE Annual Meeting and Exhibition, Florida, USA, 18-22 May 2014.

Giamundo, Vincenzo, Sarhosis, Vasilis, Lignola, Gian Piero and Cosenza, Edoardo 2014. Discrete element modelling of the archaeological colonnade in Pompeii. Presented at: 9th International Masonry Conference, Guimaraes, Portugal, 7-9 July 2014. Published in: Lourenço, Paulo B., Haseltine, Barry A. and Vasconcelos, Graça eds. Proceedings of the 9th International Masonry Conference. International Masonry Society,

Giles, Anthony

, Mouzakitis, Kyriakos, Kay, Peter, Bowen, Philip John

and Yokoi, Kensuke

2014. Explosive area classification for involatile liquid fuels: a replacement to flashpoint categorisation. Presented at: 26th European Conference Liquid Atomization & Spray Systems, Bremen, Germany, 8-10 September 2014.

Gill, R. T., Harbottle, Michael

, Smith, J. W. N. and Thornton, S. F. 2014. Influence of 2D physical heterogeneity on the electromigration of nitrate. Presented at: 13th Symposium on Electrokinetic Remediation, Malaga, Spain, 7-10 September 2014. Published in: Maroto, J. M. R, García-Delgado, R., García-Herruzo, F., Gómez-Lahoz, C., Vereda-Alonso, C. and Villén-Guzmán, M. eds. Proceedings of the 13th Symposium on Electrokinetic Remediation. pp. 61-63.

Grosvenor, Roger Ivor

and Prickett, Paul William

2014. Fast and robust milling cutter tool breakage detection within a distributed microcontroller-based condition monitoring system. Presented at: The 27th International Congress of Condition Monitoring and Diagnostic Engineering Management, Brisbane, Australia, 16-18 September 2014. Proceedings of Condition Monitoring and Diagnostic Engineering Management. pp. 1-8.

Grosvenor, Roger Ivor

and Prickett, Paul William

2014. The monitoring and validation of scale model tidal steam turbines. Presented at: The 27th International Congress of Condition Monitoring and Diagnostic Engineering Management, Brisbane, Australia, 16-18 September 2014. Proceedings of Condition Monitoring and Diagnostic Engineering Management. pp. 1-8.

Grosvenor, Roger Ivor

, Prickett, Paul William

, Frost, Carwyn

and Allmark, Matthew James

2014. Performance and condition monitoring of tidal stream turbines. Presented at: Second European Conference of the Prognostics and Health Management Society 2014, Nantes, France, 8-10 July 2014. Published in: Bregon, Anibal and Daigle, Matthew J. eds. European Conference of Prognostics and Health Management Society 2014. , vol.1 PHM Society, pp. 543-551.

Gu, Kai, Jin, Fei

, Al-Tabbaa, Abir and Shi, Bin 2014. Initial investigation of soil stabilization with calcined dolomite-GGBS blends. Presented at: Geo-Shanghai 2014 International Conference, Shanghai, China, 26-28 May 2014. Published in: Han, Jie, Puppala, Anand J., Shen, Shui-Long, Oztoprak, Sadik and Huang, Jie eds. Ground Improvement and Geosynthetics. Geo-Shanghai 2014 , vol.GSP 23 pp. 148-157. 10.1061/9780784413401.015

Haas, Christian, Petri, Ioan

and Rana, Omer Farooq

2014. Improving resource matchmaking through feedback integration. Presented at: 2014 14th IEEE/ACM International Symposium on Cluster, Cloud and Grid Computing (CCGrid), Chicago, IL, USA, 26-29 May 2014. Cluster, Cloud and Grid Computing (CCGrid), 2014 14th IEEE/ACM International Symposium on. IEEE, pp. 906-914. 10.1109/CCGrid.2014.28

Harbottle, Michael John

, Lam, Minh-Tri, Botusharova, Stefani and Gardner, Diane Ruth

2014. Self-healing soil: Biomimetic engineering of geotechnical structures to respond to damage. Presented at: 7th International Congress on Environmental Geotechnics, Melbourne, Australia, 9-14 November 2014. Published in: Bouazza, Abdelmalek, Yuen, Sam and Brown, Bruce eds. Proceedings of the 7th International Congress on Environmental Geotechnics. Engineers Australia, pp. 1121-1128.

Harid, N., Clark, David

, Mousa, S., Griffiths, H. and Haddad, A. 2014. Impulse characterization of ground electrodes. Presented at: 2014 International Conference of Lightning Protection (ICLP), Shanghai, 11-18 October. 2014. 2014 International Conference of Lightning Protection (ICLP). IEEE, pp. 1418-1423. 10.1109/ICLP.2014.6973353

Harid, Noureddine

, Clark, David

, Mousa, Salah, Griffiths, Huw and Haddad, Abderrahmane

2014. Impulse characterization of ground electrodes. Presented at: 32nd International Conference on Lightning Protection (ICLP), Shanghai, China, 13-17 October 2014.

Hartley, Jon, Lees, Jonathan

, Cuenca, Jerome

and Choi, Heungjae

2014. Assessment of machine oil quality by microwave cavity perturbation method. Presented at: 2014 International Symposium on Information Technology Convergence (ISITC 2014), Jeonju, Republic of Korea, 30-31 October 2014.

Hassan, Asghar, Firrincieli, A., Marmaras, Charalampos, Cipcigan, Liana Mirela

and Pastorelli, M.A. 2014. Integration of electric vehicles in a microgrid with distributed generation. Presented at: Power Engineering Conference (UPEC), 2014 49th International Universities, Cluj-Napoca, Romania, 2-5 September 2014. Proceedings of the Power Engineering Conference (UPEC), 2014. IEEE, 10.1109/UPEC.2014.6934641

Holt, Catherine Avril

, Whatling, Gemma Marie

, Bonnet, Cleo, Brakspear, K., Wilson, C, Williams, R. and Mason, Deborah Jayne

2014. Correlating biomechanics and biological signals in subjects undergoing high tibial osteotomy. Presented at: Othopaedic Research Society, New Orleans, LA, USA, 15-18th March 2014.

Howell, Shaun Kevin, Rezgui, Yacine

and Yuce, Baris

2014. Knowledge-based holistic energy management of public buildings. Presented at: 2014 International Conference on Computing in Civil and Building Engineering, Orlando, FL, USA, 23-25 June 2014. Published in: Issa, Raymond Issa ed. Computing in Civil and Building Engineering. Amercian Society of Civil Engineers, pp. 1667-1674. 10.1061/9780784413616.207

Huang, Guoxian, Falconer, Roger Alexander

and Lin, Binliang 2014. Numerical modeling of faecal bacteria transport processes in unsteady sediment-laden flows. Presented at: 11th International Conference on Hydroinformatics, New York, USA, 17-21 August 2014. Proceedings of 11th International Conference on Hydroinformatics. R25 New York, NY: City University of New York (CUNY), [n/a].

Huang, Guoxian, Lin, Binliang

, Zhou, Juntao and Falconer, Roger Alexander

2014. A new spatial interpolation method based on crosssections sampling. Presented at: 11th International Conference on Hydroinformatics, New York, NY, 17-21 August 2014. Proceedings of 11th International Conference on Hydroinformatics. R49 New York, USA: City University of New York (CUNY),

Ismail, Hafizul

, Eldukhri, Eldaw Elzaki and Packianather, Michael Sylvester

2014. Invasive weed optimization of swing-up control parameters for robot gymnast. Presented at: 2014 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM), Besançon, France, 8-11 July 2014. 2014 IEEE/ASME International Conference on Advanced Intelligent Mechatronics (AIM). 2014 IEEE/ASME INTERNATIONAL CONFERENCE ON ADVANCED INTELLIGENT MECHATRONICS (AIM). Hoboken, NJ: IEEE, pp. 88-93. 10.1109/AIM.2014.6878052

Jamali, H. U., Sharif, Khairi, Evans, Henry Peredur

and Snidle, Raymond Walter

2014. Transient EHL analysis of helical gears. Presented at: International Gear Conference 2014, Lyon Villeurbanne, France, 26-28 August 2014. International Gear Conference 2014 - Conference Proceedings. Cambridge: Woodhead Publishing, pp. 721-730.

Jameel, Atheel, Bowen, Philip John

and Yokoi, Kensuke

2014. Numerical study of liquid jets. Presented at: 26th European Conference Liquid Atomization & Spray Systems, Bremen, Germany, 8-10 September 2014. pp. 158-169.

Jiang, Yan, McMeekin, Scott, Reid, Alistair

, Nekahi, Azam, Judd, Martin and Wilson, Alan 2014. Theoretical model of applying radiometry to monitor insulator contamination. Presented at: . International Conference on Condition Monitoring and Diagnostics, Jeju, Korea, 21-23 September 2014.

Kadiri, Margaret Osikhofe, Bockelmann-Evans, Bettina Nicole

, Zhou, Juntao and Falconer, Roger Alexander

2014. Water quality impacts of a tidal barrage in the Severn Estuary, UK. Presented at: 10th International Symposium on Ecohydraulics, Trodheim, Norway, June 23-27.

Kaloskampis, Ioannis

and Hicks, Yulia Alexandrovna

2014. Estimating adaptive coefficients of evolving GMMs for online video segmentation. Presented at: 6th International Symposium on Communications, Control and Signal Processing, Athens, Greece, 21-23 May 2014. 2014 6th International Symposium on Communications, Control and Signal Processing (ISCCSP). Picastaway, NY: IEEE, pp. 513-516. 10.1109/ISCCSP.2014.6877925

Kara, M. C. and Stoesser, Thorsten

2014. A strong FSI coupling scheme to investigate the onset of resonance of cylinders in tandem arrangement. Presented at: OMAE 2014, San Francisco, CA, 8-13 June 2014. ASME proceedings of the 33rd international conference on ocean, offshore and Arctic engineering. , vol.2 American Society of Mechanical Engineers, V002T08A056. 10.1115/OMAE2014-23972

Kara, S., Mulahasan, Saad, Stoesser, Thorsten

and Sturm, T. W. 2014. Water surface response to flow through bridge openings. Presented at: Proceedings 7th International Conference on Fluvial Hydraulics (River Flow), Lausanne, Switzerland, 3-5 September 2014. 10.1201/b17133-95

Karihaloo, Bhushan Lal

2014. A new failure theory for laminated composites including the in situ strength effect. Presented at: Int Conf ECCM16, New York, June 2014. Int Conf ECCM16.

Karihaloo, Bhushan

2014. A new philosophy for the design of RC structures based on concepts of fracture mechanics. Presented at: 2nd Int Conf on Concrete and Reinforced Concrete – Glance at the Future (RCC2014), Moscow, Russia, May 2014. Published in: Gusev, B. V., Zvezdov, A. I., Tamrazyan, A. G. and Falikman, V. R. eds. A New Philosophy for the Design of RC Structures Based on Concepts of Fracture Mechanics. , vol.7 Moscow State Civil Engineering University Press, pp. 159-175.

Kennedy, David

, Wei, S. and Alcazar Arevalo, F.J. 2014. Two layer model of functionally graded plate with varying Poisson's ratio. Presented at: CST2014: The Twelfth International Conference on Computational Structures Technology, Naples, Italy, 2-5 September 2014. Published in: Topping, B. H. V. and Ivanyi, P. eds. CCP: 106 Proceedings Of The Twelfth International Conference On Computational Structures Technology. , vol.106 p. 34. 10.4203/ccp.106.34

Kerfriden, Pierre

, Paladim, Daniel Alves and Bordas, Stephane Pierre Alain

2014. Homogenisation methods with guaranteed accuracy: quantifying the scale separability. Presented at: 5th International Conference on Computational Methods (ICCM2014), Cambridge, UK, 28-30 July 2014.

Kerfriden, Pierre

, Renas, J.J. and Bordas, Stephane Pierre Alain

2014. An error bounding technique for the certification of Galerkin-POD surrogates. Presented at: 11th Colloque National en Calcul des Structures CSMA 2013, Giens, France, 22 May 2013.

Koh, M., Bell, James Joseph

, Williams, D., Patterson, A., Lees, Jonathan

, Root, D. E. and Tasker, Paul J.

2014. Frequency scalable large signal transistor behavioral model based on admittance domain formulation. Presented at: International Microwave Symposium, Tampa, Florida, 1-6 June 2014. 2014 IEEE MTT-S International Microwave Symposium (IMS). Picastaway, NJ: IEEE, pp. 1-3. 10.1109/MWSYM.2014.6848287

Krzma, A. S., Albano, Maurizio

and Haddad, A. 2014. Comparative performance of 11kV silicone rubber polymeric insulators under Rotating Wheel Dip Test. Presented at: 49th International Universities Power Engineering Conference (UPEC), Cluj-Napoca, Romania, 2-5 September 2014. 49th International Universities Power Engineering Conference (UPEC). IEEE, pp. 1-5. 10.1109/UPEC.2014.6934790

Kulasegaram, Sivakumar

, Deeb, Rola and Karihaloo, Bhushan

2014. Reorientation of fibres during the flow of fibre-reinforced self-compacting concrete and determination of fibre orientation factor. Presented at: EURO-C 2014 Conference, St. Anton am Arlberg; Austria, 24th - 27th March 2014.

Kulasegaram, Sivakumar

, Karihaloo, Bhushan Lal

and Deeb, Rola 2014. Reorientation of fibres during the flow of fibre- reinforced self-compacting concrete and determination of fibre orientation factor. Presented at: European Conference on Computational Modelling of Concrete Structures (EUROC 2014), St. Anton am Arlberg, Austria, 24-27 March 2014. Published in: Bicanic, N., Mang, H., Meschke, G. and de Borst, R. eds. Computational Modelling of Concrete Structures: proceedings of EURO-C 2014. , vol.2 Boca Raton: CRC Press, pp. 593-602.

Kutrowski, Tomasz, Meydan, Turgut

, Barnes, John, Aldoumani, Noor and Erichsen, Jonathan Thor

2014. Instrumentation for monitoring animal movements. Presented at: 2014 IEEE Conference on Sensors, Valencia, Spain, 2-5 November 2014. SENSORS, 2014 IEEE. IEEE, pp. 1295-1299. 10.1109/ICSENS.2014.6985248

Lewis, Jonathan, Morris, Steven

, Valera Medina, Agustin

, Bockelmann-Evans, Bettina Nicole

, Bowen, Philip

and Baej, Hesham 2014. The use of CO2 to improve stability and emissions of IGCC combustors. Presented at: ASME Turbo Expo 2014, Dusseldorf, Germany, 16-19 June 2014. Proceedings of the ASME Turbo Expo 2014: Turbine Technical Conference and Exposition. , vol.4A ASME - The American Society of Mechanical Engineers, GT2014-25446. 10.1115/GT2014-25446

Li, Jin

and Barrow, David

2014. Microfluidic encapsulation of droplet assemblies. Presented at: 18th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2014), Cardiff, 26-30 October 2014.

Li, Jin

and Barrow, David

2014. Rapid and precision mass replication of inertial fusion energy targets with multiphase microfluidics. Presented at: The 18th International Conference on Miniaturized Systems for Chemistry and Life Sciences (MicroTAS 2014), Cardiff, 26 - 30 October 2014. 18th International Conference on Miniaturized Systems for Chemistry and Life Sciences. USA: Chemical and Biological Microsystems Society, pp. 1253-1255.
Item availability restricted.

Liu, Xuezhi, Jenkins, Nicholas

, Wu, Jianzhong

and Bagdanavicius, Audrius 2014. Combined analysis of electricity and heat networks. Presented at: The 6th International Conference on Applied Energy, ICAE2014, Taipei, Taiwan, 30 May-2 June 2014.

Loudyi, D., Falconer, Roger Alexander

and Lin, Binliang

2014. MODFLOW: An insight of thirty years development of a standard numerical code for groundwater simulations. Presented at: 11th Annual Conference on Hydroinformatics, New York, NY, 17-21 August 2014. Proceedings of 11th International Conference on Hydroinformatics. R17 New York, NY: City University of New York (CUNY),

Lyu, Ying, Liang, Jun

, Yan, Jianfeng, Yu, Zhihong, Sun, Shuming and Lu, Guangming 2014. On-line probabilistic dynamic security assessment considering large scale wind power penetration. Presented at: 2014 International Conference on Power System Technology (POWERCON 2014), Chengdu, China, 20-22 October 2014. Power System Technology (POWERCON), 2014 International Conference on. 2014 INTERNATIONAL CONFERENCE ON POWER SYSTEM TECHNOLOGY (POWERCON). New York, NY: IEEE, pp. 2635-2641. 10.1109/POWERCON.2014.6993602

M, Bermudez, Ahmadian, Reza

, L, Cea and J, Puertas 2014. Sensitivity of an Escherichia Coli Transport Model to the decay rate in a coastal basin. Presented at: 3rd IAHR Europe Congress, Porto, Portugal, 14 - 16 April 2014.

Marks, Ryan

, Clarke, Alastair

, Featherston, Carol Ann

and Kawashita, Luiz

2014. Optimisation of acoustic emission sensor positioning on aerospace structures using 3D scanning laser vibrometry. Presented at: 16th International Conference on Experimental Mechanics, Cambridge, UK, 7 - 11 July 2014.

Marmaras, Charalampos, Corsaro, M., Xydas, Erotokritos, Cipcigan, Liana Mirela

and Pastorelli, M. A. 2014. Vehicle-to-building control approach for EV charging. Presented at: Power Engineering Conference (UPEC), 2014 49th International Universities, Cluj-Napoca, Romania, 2-5 September 2014. Proceedings of the Power Engineering Conference (UPEC), 2014. IEEE, 10.1109/UPEC.2014.6934639

Marmaras, Charalampos, Xydas, Erotokritos, Cipcigan, Liana Mirela

and Rana, Omer Farooq

2014. An integrated approach for simulating EVs in transport and electric power networks. Presented at: 2014 International Conference on Connected Vehicles and Expo (ICCVE), Vienna, Austria, 3-7 November 2014. Connected Vehicles and Expo (ICCVE), 2014 International Conference on. pp. 185-190. 10.1109/ICCVE.2014.7297539

Marsh, Jacqueline, Soroka, Anthony John

, Davies, Paul, Lynch, Jane

and Eyers, Daniel Roy

2014. Challenges to sustainable manufacturing resource planning implementation in SMEs: An exploratory study. Presented at: Sustainable Design and Manufacturing 2014, Cardiff, UK, 28-30 April 2014.

Masoero, E., Jennings, H. M., Ulm, F-J., Del Gado, E., Manzano, H., Pellenq, R. J-M., Yip, S., Bicanic, N, Mang, H, Meschke, G and DeBorst, R 2014. Modelling cement at fundamental scales: from atoms to engineering strength and durability. Presented at: EURO-C 2014 Conference, St. Anton am Arlberg; Austria, 24th - 27th March 2014. Published in: Bicanic, Nenad, Mang, Herbert, Meschke, Gunther and de Borst, Rene eds. Computational Modelling of Concrete Structures, Volume 1. , vol.1 CRC Press, pp. 139-148.

Mazzei, Daniele, Cominelli, Lorenzo, Lazzeri, Nicole, Zaraki, Abolfazl

and De Rossi, Danilo 2014. I-CLIPS brain: A hybrid cognitive system for social robots. Presented at: Living Machines: Conference on Biomimetic and Biohybrid Systems, 30 Jul - 1 Aug 2014. Biomimetic and Biohybrid Systems. Lecture Notes in Computer Science. Lecture Notes in Computer Science , vol.8608 Cham: Springer Verlag, pp. 213-224. 10.1007/978-3-319-09435-9_19

McCrory, John, Al-Jumaili, Safaa Khairry, Pearson, Matthew

, Eaton, Mark Jonathan

and Pullin, Rhys

2014. Automated corrected MAR calculation for characterisation of AE signals. Presented at: 31st European Conference on Acoustic Emission Testing (EWGAE), Dresden, Germany, 3-5 September 2014.

Meng, Fan-Lin and Zeng, Xiao-Jun 2014. An optimal real-time pricing for demand-side management: A Stackelberg game and genetic algorithm approach. Presented at: 2014 International Joint Conference on Neural Networks (IJCNN), Beijing, China, 6-11 July 2014. 2014 International Joint Conference on Neural Networks (IJCNN). IEEE, pp. 1703-1710. 10.1109/IJCNN.2014.6889608

Metcalfe, Andrew John, Madete, June, Williams, David, Whatling, Gemma Marie

, Kempshall, Peter, Lyons, K., Forster, M. and Holt, Catherine Avril

2014. The relationship between joint alignment and biomechanics in total knee arthroplasty: an in-vivo analysis. Presented at: British Association of Knee Surgery, Norwich, UK, 8-9th April 2014.

Mihai, Iulia Carmen

, Jefferson, Anthony Duncan

and Lyons, Paul 2014. Constitutive modelling of fibre reinforced cementitious composites based on micromechanics. Presented at: EURO-C 2014 Conference, St. Anton am Arlberg; Austria, 24th - 27th March 2014. Computational Modelling of Concrete Structures. , vol.1 Taylor and Francis,

Miranda Gonzalez, Alfredo and Valera Medina, Agustin

2014. Shale gas exploitation in Mexico: some technical challenges. Presented at: Latin American Congress of Turbomachinery, Queretaro, Mexico, 1-4 September 2014.

Mohammed Ameen, Raed Fawzi, Li, Haijiang

and Mourshed, Monjur

2014. Sustainability assessment methods of urban design: a review. Presented at: The 21st International Workshop: Intelligent Computing in Engineering 2014 (EG-ICE 2014), Cardiff, Wales, 16-18 July 2014. Published in: Li, Haijiang, De Wilde, Pieter and Rafiq, Yaqub eds. The 21st International Workshop on Intelligent Computing in Engineering 2014 - July 16th-18th, 2014 Cardiff. Cardiff: Cardiff University,

Mohd Anuar, Fatahiyah, Setchi, Rossitza

and Lai, Yukun

2014. Trademark retrieval based on phonetic similarity. Presented at: 2014 IEEE International Conference on Systems, Man and Cybernetics (SMC), San Diego, CA, 5-8 October, 2015. 2014 IEEE International Conference on Systems, Man and Cybernetics (SMC). IEEE, pp. 1642-1647. 10.1109/SMC.2014.6974151

Mokhti, Z. A., Tasker, Paul J.

2014. Analyzing the improvement in efficiency through the integration of class-F power amplifiers compared to class-AB in an envelope tracking architecture. Presented at: 26th International Teletraffic Congress (ITC), Karlskrona, Sweden, 9-11 September 2014. Teletraffic Congress (ITC), 2014 26th International. pp. 1-4. 10.1109/ITC.2014.6932967

Mokhti, Z. A., Tasker, Paul J.

2014. Using waveform engineering to optimize Class-F power amplifier performance in an envelope tracking architecture. Presented at: 9th European Microwave Integrated Circuit Conference (EuMIC), Rome, Italy, 6-7 Octpber 2014. European Microwave Integrated Circuit Conference (EuMIC), 2014 9th. IEEE, pp. 357-360. 10.1109/EuMIC.2014.6997866

Morris, Ashley

, Halpern, Marc, Prickett, Paul William

and Setchi, Rossitza M.

2014. Product change management: assessing the challenges to maintaining design integrity throughout the product lifecycle. Presented at: SDM'14: International Conference on Sustainable Design and Manufacturing, Cardiff, Wales, UK, 28-30 April 2014. Published in: Setchi, Rossitza M.

, Howlett, R. J., Naim, Mohamed Mohamed

and Seinz, H. eds. KES Transactions on Sustainable Design and Manufacturing. , vol.1 Hove, East Sussex: Future Technology Press, pp. 188-200.

Mugwar, Ahmed and Harbottle, Michael John

2014. Biomineralisation of metals in soil – effect of metal toxicity and precipitation as a protective mechanism. Presented at: 7th International Congress on Environmental Geotechnics, Melbourne, Australia, 9-14 November 2014. Published in: Bouazza, Abdelmalek, Yuen, Sam and Brown, Bruce eds. Proceedings of the 7th International Congress on Environmental Geotechnics. Engineers Australia, pp. 1136-1142.

Mukhtar, Nur Farah Hafizah, Brousseau, Emmanuel Bruno Jean Paul

and Prickett, Paul William

2014. Study of silicon tip wear during AFM probe-based machining of single crystal copper. Presented at: Ninth International Conference on MicroManufacturing (ICOMM 2014), Nanyang Technological University (NTU) and National University of Singapore (NUS), Singapore, 25-28 March 2014.

Noyvirt, Alexandre, Setchi, Rossitza

and Albert, Bruno 2014. GLAICP: a global-local optimization algorithm for robust human pose tracking from depth data. Presented at: IEEE International Conference on Systems, Man, and Cybernetics (SMC), San Diego, CA, 5-8 October 2014. 2014 IEEE International Conference on Systems, Man, and Cybernetics (SMC). 2014 IEEE INTERNATIONAL CONFERENCE ON SYSTEMS, MAN AND CYBERNETICS (SMC). Hoboken, NJ: IEEE, pp. 2541-2546. 10.1109/SMC.2014.6974309

Ogboi, Friday Lawrence, Tasker, Paul J.

, Akmal, M., Lees, Jonathan

, Benedikt, Johannes

, Bensmida, S., Morris, K., Beach, M. and McGeehan, J. 2014. High bandwidth investigations of a baseband linearization approach formulated in the envelope domain under modulated stimulus. Presented at: European Microwave Conference (EuMC) 2014, Rome, Italy, 6-9 October 2014. European Microwave Conference (EuMC). , vol.44 IEEE, pp. 1305-1308. 10.1109/EuMC.2014.6986683

Ogboi, Friday Lawrence, Tasker, Paul J.

, Akmal, Muhammad, Lees, Jonathan

, Benedikt, Johannes

, Bensmida, S., Morris, K., Beach, M. and McGeehan, J. 2014. Investigation of various envelope complexity linearity under modulated stimulus using a new envelope formulation approach. Presented at: 83rd ARFTG Microwave Measurement Conference 2014, Tampa, USA, 1 - 6 June 2014. Compound Semiconductor Integrated Circuit Symposium (CSICs), 2014 IEEE. IEEE, pp. 1-4. 10.1109/CSICS.2014.6978563

Ogboi, Friday Lawrence, Tasker, Paul J.

, Mohkti, Z., Lees, Jonathan

, Benedikt, Johannes

, Bensmida, S., Morris, K., Beach, M. and McGeehan, J. 2014. Sensitivity of AM/AM linearizer to AM/PM distortion in devices. Presented at: 83rd ARFTG Microwave Measurement Conference 2014, Tampa, FL, USA, 6 June 2014. ARFTG Microwave Measurement Conference (ARFTG), 2014 83rd. IEEE, pp. 1-4. 10.1109/ARFTG.2014.6899507

Ozel, Fatih and Davies, Huw Charles

2014. Development of an ANFIS based policy intervention evaluation framework for electric vehicle technology. Presented at: European Electric Vehicle Congress, Brussels, 2 -5 December 2014.

Packianather, Michael Sylvester

, Yuce, Baris

, Mastrocinque, Ernesto, Fruggiero, Fabio, Pham, Duc and Lambiase, Alfredo 2014. Novel Genetic Bees Algorithm applied to single machine scheduling problem. Presented at: World Automation Congress (WAC) 2014, Waikoloa, Hawaii, USA, 3-7 August 2014. World Automation Congress (WAC), 2014. IEEE, pp. 906-911. 10.1109/WAC.2014.6936194

Pearson, Matthew R.

, Eaton, Mark Jonathan

, Featherston, Carol Ann

and Holford, Karen Margaret

2014. Airborne acoustic damage location for structural health monitoring applications. Presented at: ICEM 16 - 16th International Conference on Experimental Mechanics, Cambridge, England, 7-11 July 2014.

Penchev, P., Bhaduri, Debajyoti

, Dimov, S. and Soo, S.L. 2014. Novel manufacturing platform for scale up production of miniaturized parts. Presented at: IWMF, 9th International Workshop on Microfactories, Honolulu, 5-8 October 2014.

Peng, Sun, Hicks, Yulia

and Setchi, Rossitza

2014. Joint EEG-fMRI model for EEG source separation. Presented at: 2014 IEEE International Conference on Systems, Man and Cybernetics (SMC), San Diego, CA, 5-8 October 2014. 2014 IEEE International Conference on Systems, Man and Cybernetics (SMC). IEEE, pp. 2234-2239. 10.1109/SMC.2014.6974257

Petri, Ioan

, Beach, Thomas

, Zou, Mengsong, Montes, Javier Diaz, Rana, Omer Farooq

and Parashar, Manish 2014. Exploring models and mechanisms for exchanging resources in a federated cloud. Presented at: IEEE International Conference on Cloud Engineering (IC2E), Boston, MA, USA, 11-14 March 2014. Cloud Engineering (IC2E), 2014 IEEE International Conference on. IEEE, pp. 215-224. 10.1109/IC2E.2014.9

Petri, Ioan

, Rana, Omer

, Li, Haijiang

, Beach, Thomas

, Zou, Mengsong, Diaz-Montes, Javier and Parashar, Manish 2014. Cloud supported building data analytics. Presented at: 2014 14th IEEE/ACM International Symposium on Cluster, Cloud and Grid Computing (CCGrid), Chicago, IL, USA, 26-29 May 2014. Cluster, Cloud and Grid Computing (CCGrid), 2014 14th IEEE/ACM International Symposium on. 2014 14th IEEE/ACM International Symposium on Cluster, Cloud and Grid Computing. IEEE, pp. 641-650.

Porch, Adrian

2014. Towards an efficient biosensor for the detection of lipopolysaccharide in sepsis using molecularly imprinted polymers. Presented at: Winter Meeting of the Anaesthetic ResearchSociety, Royal College Anaesthetists, London, October 2013.

Pugh, Daniel

, Crayford, Andrew Philip

, O'Doherty, Timothy

2014. Variation in laminar burning velocity and Markstein length with water addition for industrially produced syngases. Presented at: urbo Expo 2014: Turbine Technical Conference and Exposition, Dusseldorf, Germany, 16-20 June 2014. ASME Turbo Expo 2014: Turbine Technical Conference and Exposition: Volume 4A: Combustion, Fuels and Emissions. ASME, V04AT04A030. 10.1115/GT2014-25455

Qadrdan, Meysam

2014. Combined gas and electricity infrastructure. Presented at: Energy Infrastructure symposium, London, 18 December.

Qadrdan, Meysam

2014. Options for addressing the balancing challenges: Integrated analysis of gas and electricity networks. Presented at: IEEE ISGT 2014, Istanbul, Turkey, 12-15 October 2014.

Qadrdan, Meysam

and Strbac, Goran 2014. Flexibility of integrated gas and electricity networks. Presented at: WholeSEM Annual Conference, London, 8-9 June 2014.

Raghuyal, Syrish, Steer, Julian Mark

, Griffiths, Anthony John and Hopkins, Andrew 2014. Characterisation of Chromium-Copper- Arsenic (CCA) treated wood waste from a steel-making environment. Presented at: 6th International Conference on Waste Management and the Environment - Waste Management 2012, WM 2012, New Forest, UK, 6 July 2012.

Raju, Gangadharan, Wu, Zhangming

and Weaver, Paul 2014. On further developments of feasible region of lamination parameters for symmetric composite laminates. Presented at: 55th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, National Harbor, ML, USA, 13-17 January 2014. 10.2514/6.2014-1374

Robson, Stephen

, Haddad, Abderrahmane

and Griffiths, Huw 2014. An integrated device for optimised power line communication and measurement on smart grids. Presented at: T&D conference and exposition, Chicago, Il, 14-17 April 2014. T&D Conference and Exposition, 2014 IEEE PES. IEEE, pp. 505-509. 10.1109/TDC.2014.6863309

Romli, Awanis, Prickett, Paul William

, Setchi, Rossitza

and Soe, Shwe 2014. Sensitivity analysis of an eco-design house of quality model. Presented at: SDM'14: International Conference on Sustainable Design and Manufacturing, Cardiff, Wales, UK, 28-30 April 2014. pp. 488-499.

Sedighi, Majid, Bennett, Daniel, Masum, Shakil Al

, Thomas, Hywel

, Erik, Johansson and Topias, Siren 2014. Temperature data analysis from fields scale thermal monitoring. Presented at: 22nd UK national conference of the Association for Computational Mechanics in Engineering, Exeter, UK, 2-4 April 2014.

Sedighi, Majid, Masum, Shakil Al

, Thomas, Hywel

and Bennett, Daniel 2014. Rock thermal behaviour - Analysis of data from a monitoring programme. Presented at: Third international conference on computational methods for thermal problems, Lake Bled, Slovenia, 2-4 June 2014.

Setchi, Rossitza

and Hicks, Yulia Alexandrovna

2014. Multi-rate medium access protocol based on enforcement learning. Presented at: IEEE international Conference on Systems, Man and Cybernetics, San Diego, CA, USA, 5-8 October 2014.

Setchi, Rossitza

, Noyvirt, Alexandre and Albert, Bruno 2014. A global-local optimisation algorithm for robust human pose tracking from depth data. Presented at: 2014 IEEE International Conference on Systems, Man and Cybernetics (SMC), San Diego, CA, 5-8 October 2015. Proceedings of the 2014 IEEE International Conference on Systems, Man, and Cybernetics; SMC. IEEE, pp. 2571-2576.

Setchi, Rossitza

, Noyvirt, Alexandre and Albert, Bruno 2014. A portable medical system for the early diagnosis and treatment of traumatic brain injury. Presented at: 2014 IEEE International Conference on Systems, Man and Cybernetics (SMC), San Diego, CA, 5-8 October 2014. 2014 IEEE International Conference on Systems, Man and Cybernetics (SMC). IEEE, pp. 2529-2534. 10.1109/SMC.2014.6974307

Sheeran, Liba

, Sparkes, Valerie

, Whatling, Gemma

and Holt, Cathy 2014. The Cardiff classifier: Objective classification method to subgroup and predict recovery of chronic low back pain. Presented at: Physiotherapy Research Society Conference, Norwich, U.K., April 2014. -.

Shen, Boyang, Wang, Sheng

, Fu, Lin and Liang, Jun 2014. Design and comparison of feasible control systems for VSC-HVDC transmission system. Presented at: 2014 2nd International Conference on Artificial Intelligence, Modelling and Simulation (AIMS),, Madrid, 18 -20 November 2014. Artificial Intelligence, Modelling and Simulation (AIMS). IEEE, pp. 234-239. 10.1109/AIMS.2014.18

Short, Jamie, Grosvenor, Roger Ivor

and Prickett, Paul William

2014. The development of a process charge expert system for a Basic Oxygen Steelmaking plant. Presented at: 18th International Conference on Knowledge-Based and Intelligent Information & Engineering Systems, Gdynia, Poland, 15-17 September 2014.

Shrama, Kadhum, Clarke, Alastair

2014. Detection of cracking in mild steel fatigue specimens using acoustic emission and digital image correlation. Presented at: 32st Conference of the European Working Group on Acoustic Emission, Dresden, Germany, 3 -5 September 2014. Proceedings of 31st Conference of the European Working Group on Acoustic Emission (EWGAE).

Soe, Shwe, Robinson, Michael Richard, Martin, Philip Stephen, Jones, Michael David

and Theobald, Peter

2014. Feasibility of using Duraform® flex lattice structures and additive manufacturing for optimising bicycle helmet design safety. Presented at: SDM'14: International Conference on Sustainable Design and Manufacturing, Cardiff, Wales, 28-30 April 2014. Sustainable Design and Manufacturing: SDM-14: Pre-Proceedings. , vol.1 (1) England: KES International, pp. 278-290.

Soroka, Anthony John

, Bennett, Alastair, Prickett, Paul William

and Higgins, Michael 2014. Industrial perceptions of manufacturing operations simulation. Presented at: Sustainable Design and Manufacturing 2014, Cardiff, UK, 28-30 April 2014.

Srivastava, Pallavee, Braganca, Judith, Ramanan, Sutapa Roy and Kowshik, Meenal 2014. Green synthesis of silver nanoparticles by haloarchaeon Halococcus salifodinae BK6. Presented at: International Conference on Nano Materials: Science, Technology and Applications 2013 (ICNM), Vandalur, India, 05-07 December 2013. Advanced Materials Research. , vol.938 Trans Tech Publications, pp. 236-241. 10.4028/www.scientific.net/AMR.938.236

Syred, Nicholas, Lewis, Jonathan, Valera Medina, Agustin

and Bowen, Philip John

2014. Acoustic streaming effects in high intensity swirl burners. Presented at: 52nd AIAA Science and Tecnology Forum, National Harbour, MD, USA, 13-17 January 2014. 10.2514/6.2014-1387

Thomas, Hywel Rhys

and Sedighi, Majid 2014. Computational modelling of coupled processes in ground energy problems. Presented at: Third International Conference on Computational Methods for Thermal Problems, Lake Bled, Slovania, 2-4 June 2014.

Tolosana-Calasanz, Rafael, Banares, Jose Angel, Rana, Omer Farooq

, Pham, Congduc, Xydas, Erotokritos, Marmaras, Charalampos, Papadopoulos, Panagiotis and Cipcigan, Liana

2014. Enforcing quality of service on opennebula-based shared clouds. Presented at: 14th IEEE/ACM International Symposium on Cluster, Cloud and Grid Computing (CCGrid), Chicago, IL, 26-29 May 2014. Cluster, Cloud and Grid Computing (CCGrid), 2014 14th IEEE/ACM International Symposium on. Picastaway, NJ: IEEE, pp. 651-659. 10.1109/CCGrid.2014.50

Tornincasa, Stefano, Bonisoli, Elvio, Kerfriden, Pierre

and Brino, Marco 2014. Investigation of crossing and veering phenomena in an isogeometric analysis framework. Presented at: 32nd IMAC, A Conference and Exposition on Structural Dynamics, Brescia, Italy, 1-5 July 2012. Published in: Allemang, Randall ed. Topics in Modal Analysis II, Volume 8: Proceedings of the 32nd IMAC, A Conference and Exposition on Structural Dynamics, 2014. Conference Proceedings of the Society for Experimental Mechanics Series London: Springer, pp. 361-376. 10.1007/978-3-319-04774-4_34

Tripathy, Snehasis

, Elgabu, Hesham and Thomas, Hywel

2014. Soil-water characteristic curves from various laboratory techniques. Presented at: International Conference on Unsaturated Soils, Sydney, 2 - 4 July 2014. Published in: Khalili, N, Russell, A. R and Khoshghalb, A eds. Unsaturated Soils: Research and Applications. CRC Press, pp. 1701-1707. 10.1201/b17034-248

Ugalde Loo, Carlos Ernesto

, Amezquita-Brooks, A. Luis, Liceaga-Castro, Eduardo and Liceaga-Castro, Jesus 2014. Analysis and efficient control design for generator-side converters of PMSG-based wind and tidal stream turbines. Presented at: 18th Power Systems Computation Conference (PSCC), Wroclaw, Poland, August 18-22, 2014.

Valera Medina, Agustin

, Syred, Nicholas, Bowen, Philip John

2014. Shear flow and central recirculation zone interaction in reactive swirling flows. Presented at: 52nd Aerospace Sciences meeting, National harbor, Maryland, Maryland, USA, 13-17 January 2014.

Vincenzo, Giamundo, Sarhosis, Vasilis, Lignola, Gian Piero, Sheng, Yong, Garrity, Stephen and Manfredi, Gaetano 2014. Low unit strength masonry: computational modelling approaches. Presented at: 9th International Masonry Conference, Guimaraes, Portugal, 7-9 July 2014. Published in: Lourenço, Paulo B., Haseltine, Barry A. and Vasconcelos, Graça eds. Proceedings of the 9th International Masonry Conference. International Masonry Society,

Walters, David Mark, Sevcenco, Yura Alexander

, Crayford, Andrew Philip

, Johnson, Mark P. and Williams, Paul I. 2014. Differential mobility spectrometer particle emission analysis for multiple aviation gas turbine engine exhausts at high and low power conditions and a simulated gas turbine engine exhaust. Presented at: ASME Turbo Expo 2014: Turbine Technical Conference and Exposition, Düsseldorf, Germany, 16–20 June 2014. Conference Proceedings of ASME Turbo Expo 2014: Turbine Technical Conference and Exposition. Combustion, Fuels and Emissions , vol.4B New York: ASME, 10.1115/GT2014-26902

Wang, Zeliang and McWhirter, John

2014. A new multichannel spectral factorisation algorithm for parahermitian polynomial matrices. Presented at: 10th IMA International Conference on Mathematics in Signal Processing, Birmingham, UK, 15-17 December 2014. 10th IMA International Conference on Mathematics in Signal Processing. IMA Conference on Mathematics in Signal Processing, 2014. Institute of Mathematics,

Wang, Sheng

, Liang, Jun

, Barker, C. D. and Whitehouse, R. S. 2014. Experimental validation of autonomous converter control in a HVDC grid. Presented at: EPE 2014: 16th European Conference on Power Electronics and Applications, Lappeenranta, Finland, 26-28 August 2014.

Watling, Daniel, Whatling, Gemma Marie

and Holt, Catherine Avril

2014. In vivo meniscus deformation with knee flexion and axial loading. Presented at: British Orthopaedic Research Society Annual Conference, Bath, UK, 23-24 June 2014.

Whatling, Gemma Marie

, Watling, Daniel, Forrest, Sarah, Wilson, Chris, Metcalfe, Andrew, Ismael, S. and Holt, Catherine Avril

2014. BIomechanical effects of high tibial osteotomy on patients with medial osteoarthritis during gait. Presented at: British Orthopaedic Research Society Annual Conference, University of Bath, 23-24 June 2015.

Whatling, Gemma marie

, Watling, Daniel, Forrest, Sarah, Wilson, Chris, Metcalfe, Andrew, Ismael, S. and Holt, Catherine Avril

2014. Changes in gait biomechanics following high tibial osteotomy. Presented at: Young Researchers Future Forum 2014: Engineering for Orthopaedic Applications, Leeds, 15 - 17 September 2014.

Whatling, Gemma Marie

, Watling, Daniel, Forrest, Sarah, Wilson, Chris, Metcalfe, Andrew, Ismael, S. and Holt, Catherine Avril

2014. How does high tibial osteotomy affect lower limb biomechanics? Presented at: 7th World Congress of Biomechanics, Boston, MA, July 6-11 2014.

Williams, David, Metcalfe, Andrew, Madete, June, Whatling, Gemma Marie

, Roux., A., Kempshall, P., Lyons, K., Forster, M. and Holt, Catherine Avril

2014. The relationship between alignment, function and loading in Total Knee Replacement: In-vivo analysis of a unique patient population. Presented at: 7th World Congress of Biomechanics, Boston, MA, July 6-11 2014.

Wilson, J. W., Karimian, N., Peyton, A .J., Liu, J.

, Kahlon, N. S. and Davis, C. L. 2014. Incremental permeability and magnetic Barkhausen noise for the assessment of microstructural changes in Grade 91 power station tubes. Presented at: 53rd Annual Conference of the British Institute of Non-Destructive Testing (NDT 2014), Manchester, England, 9-11 September 2014. 53rd Annual Conference of the British Institute of Non-Destructive Testing (NDT 2014). British Institute of Non-Destructive Testing ( BINDT ),

Wu, Zhangming

, Raju, Gangadharan, White, Simon and Weaver, Paul 2014. Optimal design of postbuckling behaviour of laminated composite plates using lamination parameters. Presented at: 55th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, National Harbor, ML, USA, 13-17 January 2014. 10.2514/6.2014-1376

Xia, J., Falconer, Roger Alexander

, Guo, P. and Gu, A. 2014. Stability criterion for a flooded human body under various ground slopes. Presented at: 11th International Conference on Hydroinformatics, New York, NY, 17 - 21 August 2014. Proceedings of 11th International Conference on Hydroinformatics. R40 New York, USA: City University of New York (CUNY),

Xie, Haijian, Sedighi, Majid, Thomas, Hywel Rhys

and Chen, Yunmin 2014. Non-isothermal diffusion of chemicals in semi-infinite porous media. Presented at: 3rd International Conference on Computational Methods for Thermal problems, Lake Bled, Slovenia, 2-4 June 2014.

Yang, F., Lees, Jonathan

, Choi, Heungjae

, Yu, H. and Tasker, Paul J.

2014. Continuous class BJ power amplifier with DGS output matching. Presented at: 83rd ARFTG Microwave Measurement Conference 2014, Tampa, USA, 6 June 2014. Microwave Symposium (IMS), 2014 IEEE MTT-S International. IEEE, pp. 1-4. 10.1109/MWSYM.2014.6848562

Yokoi, Kensuke

2014. Density-scaled balanced continuum surface force (CSF) model. Presented at: 28th Symposium on Computational Fluid Dynamics, Tokyo, Japan, 10-12 December 2014.

Zabek, D.

, Taylor, J. and Bowen, C. R. 2014. Performance of thin film polyvinylidenefluoride (PVDF) for pyroelectric energy harvesting. Presented at: IEEE International Symposium on the Applications of Ferroelectric, International Workshop on Acoustic Transduction Materials and Devices & Workshop on Piezoresponse Force Microscopy, State College, PA, USA, 12-16 May 2014. 2014 Joint IEEE International Symposium on the Applications of Ferroelectric, International Workshop on Acoustic Transduction Materials and Devices & Workshop on Piezoresponse Force Microscopy. IEEE, 10.1109/ISAF.2014.6923020

Zaraki, Abolfazl

, Banitalebi Dehkordi, Maryam

, Mazzei, Daniele and De Rossi, Danilo 2014. An experimental eye-tracking study for the design of a context-dependent social robot blinking model. Presented at: Living Machines 2014, Milan, Italy, 30 July - 1 August 2014. Published in: Duff, Armin, Lepora, Nathan F., Mura, Anna, Prescott, Tony J. and Verschure, Paul F. M. J. eds. Biomimetic and Biohybrid Systems: Third International Conference, Living Machines 2014, Milan, Italy, July 30 – August 1, 2014. Proceedings. Lecture Notes in Computer Science , vol.8608 Springer Verlag, pp. 356-366. 10.1007/978-3-319-09435-9_31

Zaraki, Abolfazl

, Giuliani, Manuel, Banitalebi Dehkordi, Maryam

, Mazzei, Daniele, D'ursi, Annamaria and De Rossi, Danilo 2014. An RGB-D based social behavior interpretation system for a humanoid social robot. Presented at: ICRoM 2014 International Conference on Robotics and Mechatronics, Tehran, Iran, 15-17 October 2014. 2014 Second RSI/ISM International Conference on Robotics and Mechatronics (ICRoM). IEEE, pp. 185-190. 10.1109/ICRoM.2014.6990898

Zhang, Hongchao, You, J. F., Zhu, Hanxing

and Kennedy, David

2014. Modeling the high strain compression of nano-sized random irregular Voronoi honeycombs. Presented at: 8th International Conference on Advanced Computational Engineering and Experimenting, Paris, France, June 30-3 July 2014.

Zhang, Jingjing

, Li, Kang, Zhao, Wanqing

, Fei, Minrui and Wang, Yigang 2014. A systematic fire detection approach based on sparse least-squares SVMs. Presented at: International Conference on Intelligent Computing for Sustainable Energy and Environment and International Conference on Life System Modeling and Simulation, Shanghai, China, 20 -23 September 2014. Published in: Fei, M., Peng, C., Su, Z., Song, Y. and Han, Q. eds. Computational Intelligence, Networked Systems and Their Applications. Communications in Computer and Information Science. Communications in Computer and Information Science , vol.462 (462) Berlin: Springer, pp. 351-362. 10.1007/978-3-662-45261-5_37

Zhang, Tianqi, Li, Chuanyue

and Liang, Jun

2014. A thyristor based series power flow control device for multi-terminal HVDC transmission. Presented at: 49th International Universities Power Engineering Conference (UPEC), Cluj-Napoca, Romania, 2-5 September 2014. Power Engineering Conference (UPEC), 2014 49th International Universities. IEEE, pp. 1-5. 10.1109/UPEC.2014.6934802

Zhu, Hanxing

, Ma, Yanhui and Su, Bo 2014. Designing nanofibrous materials for bioscience and medical applications. Presented at: 7th World Congress of Biomechanics, Boston, USA, 6-11 July 2014.

Zhu, Hanxing

, You, Junfeng and Zhang, Hongchao 2014. High strain compression behaviour of nano-structured hierarchical irregular honeycombs. Presented at: 11th World Congress of Computational Mechanics, Barcelona, Spain, 20-25 July 2014.

Zou, Mengsong, Diaz-Montes, Javier, Rodero, Ivan, Parashar, Manish, Petri, Ioan

, Rana, Omer Farooq

, Qi, Xin and Foran, David J. 2014. Collaborative marketplaces for eScience: A medical imaging use case. Presented at: 2014 International Conference on Collaboration Technologies and Systems (CTS), 19-23 May 2014, Minneapolis, MN, USA. Collaboration Technologies and Systems (CTS), 2014 International Conference on. pp. 500-506. 10.1109/CTS.2014.6867615

Monograph

Balta-Ozkan, Nazmiye, Watson, Tom, Connor, Peter, Axon, Colin, Whitmarsh, Lorraine E.

, Davidson, Rosemary, Spence, Alexa, Baker, Phil, Xenias, Dimitrios

, Cipcigan, Liana Mirela

and Taylor, Gary 2014. Scenarios for the Development of Smart Grids in the UK: synthesis report. [Project Report]. London: UKERC. Available at: http://www.ukerc.ac.uk/support/tiki-download_file....

Cleves, Andrew, Morgan, Helen, Poole, R. and Carolan-Rees, Grace 2014. NICE Medical Technologies Guidance [MTG23]: The TURis system for transurethral resection of the prostate, External Assessment Centre report. [Project Report]. The National Institute for Health and Care Excellence. Available at: https://www.nice.org.uk/guidance/mtg23

Corkhill, C, Jones, G, Roberts, R, Rogers, Daniel, Stubbs, Alex, Tarrant, Kieron and Thomas, Lee

2014. Shiyala Village Solar Electrification Project: 2014 Upgrade. [Project Report].

Crayford, Andrew Philip

, Johnson, Mark P., Sevcenco, Yura Alexander

, Williams, Paul I., Madden, Paul, Marsh, Richard

and Bowen, Philip John

2014. SAMPLE III SC.05 - Studying, sampling and measuring of Aircraft ParticuLate Emissions III: Specific Contract 05. [Technical Report]. European Aviation Safety Agency. Available at: https://easa.europa.eu/document-library/research-p...

Dale, Megan, Morgan, Helen Elizabeth, Peirce, Susan

, Cleves, Andrew and Carolan-Rees, Grace 2014. NICE Medical Technologies Guidance [MTG24]: Sherlock 3CG Tip Confirmation System for placement of peripherally inserted central catheters, External Assessment Centre report. [Project Report]. The National Institute for Health and Care Excellence. Available at: https://www.nice.org.uk/guidance/mtg24/resources/t...

Dale, Megan, Cleves, Andrew, Peirce, Susan Caroline

and Carolan-Rees, Grace 2014. The PressureWire fractional flow reserve measurement system for coronary artery disease [Briefing]. Medtech Innovation Briefings, vol. MIB2. UK: National Institute of Health and Care Excellence. Available at: http://www.nice.org.uk/Advice/MIB2

Sedighi, Majid, Bennett, Daniel, Masum, Shakil Al

, Thomas, Hywel

and Erik, Johansson 2014. Analysis of temperature data at the Olkiluoto [working report]. Posiva Oy. Available at: https://inis.iaea.org/collection/NCLCollectionStor...

Thomas, Lee